Adding datastore in VMware with dell perc5.i after enabling vt - d

Dear community of VMware,

I have a problem with my v5 sphere adding datastore in VMware, the problem comes when I put the vt - d on enable. I have my store of data on raid 5 with a dell perc5.i. When I enable this feature my data store went from raid controller. Another point, when I do a new raid with en disks try to add it, I noticed that when it is being initialized, I can add the store of data without any problem. But after that is done initializing it went again.

Now maybe you think why put vt - d j my setup is that I want to make my virtual nas/san inside vmware with freebsd, and I need to get through to my tape drive, connect to my backup server.

No one knows what might be the problem or is it simply impossible if you turn on enable vt - d, you can not use the raid controller in the PCI-E slot more data warehouses, but just to get through?

Other info I already have my sphere of VMware on USB

I thank very you much in advance!

With sincere friendships.

Emiel

in the community, I've seen a few posts, where they said there are some problems of hardware compatibility with perc5i and vtd, the challenge is to use perc6

Some say to upgrade firmware for some versions of LSI perc consult the links below

http://communities.VMware.com/message/1826092

http://communities.Intel.co.jp/thread/20540

Tags: VMware

Similar Questions

  • Any chance of an installable Image with Dell management components?

    Subject says it all.

    I just bought 3 new PE2970 and would like the Dell that me is available natively management components...

    Thanks for listening...

    Wow!  What a welcome in the VM world!  I was about to ask about upgrading the standard installation of ESXi to that with Dell management components, but I think I'll ask for help elsewhere.

    'VMware ESXi 3.5 Installable U4 with Dell management components' is now available under the section binaries in the ESXi download page option.

  • MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

    MacBook Pro (retina, early 2013) will work well with Dell P2715Q monitor?

    Doesn't look like 4K is a good option.

    /macbook-pro-retina-display-how-to-manually-switch-http://www.EveryMac.com/systems/Apple/Macbook_pro/MacBook-Pro-retina-display-FAQ

    Graphics.html #extdisplays

    Built-in display: 15.4 "Widescreen Native resolution: 2880 x 1800
    Details: This model has a screen 15,4 "color widescreen LED backlit with IPS technology with a 2880 in native resolution from 1800 to 220 DPI (178 degrees viewing angle). It also supports of the resolutions on the scale of 1920 by 1200, 1680 by 1050, 1280 by 800 and 1024 by 640.

    See also: how can you 'strength' or 'hack' the Retina Display MacBook Pro models running at the native resolution or otherwise more on screen that adapt default?

    2 screen support: Double/mirror *. 2nd Max Resolution: 2560 x 1600 (x 2 *)
    Details: * This model supports a simultaneous maximum resolution up to 2560 x 1600 on two external displays via Thunderbolt. Alternatively, it can support a single screen up to 2560 x 1600 per Thunderbolt and one display up to 1920 x 1200 through HDMI. Although it can theoretically supply all the three external displays, such as confirmed by a useful player, it runs too hot with three connected screens.

    http://www.EveryMac.com/systems/Apple/Macbook_pro/specs/MacBook-Pro-core-I7-2.7-15-early-2013-retina-display-specs.html

    Although I think I read some hacks to make 4 K @ 30 fps.

  • Brother Hl-2270DW with Dell Inspiron Mini printer. It is not on the Mini CD and can only find HL-2170DW.

    Trying to activate my brother Printer HL-2270DW with Dell Inspiron Mini.  It is not on the Mini CD and can only find HL-2170DW.     How can I get this printer to connect without using the disc?

    Please do not let your Windows version a secret.

    Find the driver here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_top.html?reg=us&c=us&lang=en&prod=hl2270dw_all

    Install the driver and then connect the printer.

  • Failed to retrieve the computer with Dell PC Restore by symantec

    I tried to go back to the original Dell configuration (how I got the computer when I bought it) with Dell PC Restore by symantec. When I hit the button is, I get an error saying "not found any recovery point. I am sure that the original configuration is still on my computer on another partition as an image file, because I've never touched, so I do not understand how it can not find this recovery point. Someone an idea? Please

    duketv,
    Thanks for posting on the Microsoft answers Forum.  It seems that if the action that you tried to run was just looking for a saved backup and not trying to reset to default.  You will need to check with Dell that all OEM restore operations are specific to the brand.  This link, you should get the information you need: http://support.dell.com/support/topics/global.aspx/support/dsn/document?c=us&l=en&s=gen&docid=58E26A65A4388E4FE040AE0AB7E107E3
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • ERROR WITH "DELL WIRELESS WLAN CARD WIRELESS NETWORK CONTROLLER.

    GOT AN ERROR MESSAGE SAYING "DELL WIRELESS WLAN CARD WIRELESS NETWORK CONTROLLER STOPPED WORKING AND WAS CLOSED" AND NEED TO FIX. WHAT SHOULD I DO?

    Hello

    Actually try updating your driver and check with Dell Support and Forums if necessary.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    Dell - drivers
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Dell support
    http://support.Dell.com/

    Dell forums
    http://en.community.Dell.com/forums/
    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Request a product key after 3 years. Product included with Dell original keys do not work.

    Over the past two days, Windows started asking me to validate my product code.  This, despite the fact that I had the same OS since May 2007.  I do not know what prompted the change, but I have two codes of product on the CD provided by Dell.  One is for the OS, the other is for Microsoft Office professional 2007.  The only other CD received with the system is Dell XPS drivers and resources.  No Microsoft Product Code is acceptable for this verification process.

    Which MAY have been prompted by installing a new motherboard - the previous Dell motherboard had to be replaced due to several bad capacitors.  However, not sure how this affects the o/s installed previously.  The computer works in a manner consistent with the change of the motherboard for about 2 weeks now.  The new motherboard is a 2.67 image system and RAM has been improved at the same time to 4 GB.   I thought I would include these changes even if they seem not related to the evolution of the o/s.

    Thank you.

    "Heather Clemenceau" wrote in message News: f7c18811-e9a6-4bff-b053-7146e60c07f5...

    Thanks for the replies, I will examine in detail a little later.

    No, in answer to your question - the new motherboard is not made by Dell.  Dell had a problem a few years with the defective capacitors - although there are a few motherboards of Dell stock, there is no interest to replace an original motherboard with bad capacitors, with a new Board of Directors with the same problems.  Dell has replaced bad motherboards a couple of years, but mine had not blown at the time, and I'm not "excluded".

    In addition, the replacement with Dell motherboard is $400 + US dollars for a dual core (and comes with the same potential problem of capacitor), while I was able to get a new card with a quad core locally for about $250.  Is not supposed for several points of view to do otherwise, I think.

    The system doesn't seem to work with a few minor quirks, what are the consequences of inaction?  I can't afford to raise more money on this problem, as I am a student full time and cannot afford to replace the operating system...

    TKs

    He@ther

    Provided by the Dell original OS keycode will OPERATE ONLY with a card mother Dell. You can buy a new key code which, by chance, usually comes with the installation media.
     
    You may have saved money on the Exchange and got yourself a better computer, but still you have to pay $400 after buying a new operating system. Look on the bright side, for $400, you have a more powerful computer. Consider making Windows 7.

    --

    Mike Hall - MVP Windows Experience
    http://msmvps.com/blogs/mikehall/

    Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • Is anyone has problems with Dell support - called using micro

    Hello users of the Forum.

    My 2720 xps is not save anything when I use the microphone jack and little record (low volume) anything when I use the microphone. I also have questions about the use of large screen XPS2720 to extend my laptop screen using HDMI from laptop HDMI in the XPS. It does not either. Here is my support issues:

    1 has reached the customer. The person would put me on hold for each 2 questions simple and "research". His answers were vague, and then he said he would transfer me to Office work support as he has managed "inspiron" only! His transfer has failed and abandoned call.

    2. calls on the customer. Voice was smothered at the other end, when I mentioned, so the call dropped!

    3. calls on the customer. The person could not understand what I was trying to make (connect laptop XPS display and audio not sent / mic jack question), he tried to understand the question but kept in interpreting everything that I said mean that I was trying to extend the XPS specification to a monitor. I asked to speak to someone who knows the best product, he informed that he will put the prime contractor, and the abandoned call. Now I'm wondering if there is another meaning to call down when Dell is unable to answer.

    4 called again, the first person who I arrived before also picked up my call, when she heard what I was looking for the resolution, the call dropped.

    I don't know what is happening with Dell technical support. I would like to know if anyone else had experiences similar to my problems, especially when Dell support is unable to successfully respond to the question.  I really prefer to talk to actual dell support person in the United States (instead of people at offshore call center) to get answers to my questions. I tried to download the XPS manual and the link led me to a PDF doc, which indicates that it is the manual of the user, but everything, it's a manual to pay off the system - open lids, replace chipsets, back cover, display etc.. !! Frustrating :-)

    As Mary said, there are 2 ports HDMI on the XPS 2720. If you try to view the screen of the laptop on the XPS 2720, you must use HDMI-In port on the back of the specification XPS (#14 here).

    There are also press the input source selection button (#9) to select the input source. It may take a couple of presses until she "cycles" through all the choices and sees the laptop. So, wait a few seconds between the push to give him a chance to change the input source.

    And you should probably also go into Windows Display options on your laptop and make sure that it is set to use a second monitor...

    EDIT: Link fixed

  • (Redirected) Quite upset with dell customer service

    So I bought a dell inspiron 7720 last February and I must say that I was very happy with the product while he was working. Not 4 months after my purchase, my laptop broke due to a faulty motherboard or something and after nearly 2 weeks on the phone with dell, I finally got one it shipped to get fixed and only he got back and the operating state after a month to a month and a half. I quite understand in the first place, knowing that these things happen. Now about 6 months later I was playing a game, just the laptop, died on me out of nowhere. Now my laptop responds at all, can't activate it. I have no sign of life when I hit the power button. Also when I plug in my power cord light is blue, but as soon as I that plug into my laptop my charger led turns off again and I get nothing from it. After being tossed back around between people at dell, I am still nowhere because I told me that my warranty has expired (do not take into account the month and a half it took to get my laptop working again that would put me in my time of warranty) and I keep getting hung up when trying to contact customer support for people having expired guarantees. So I want to come is that I'm really angry that, in the space of 10 months, my laptop has broken twice (keeping in mind that I treat my laptop like a baby) and I had a horrible time trying to get help fixing it. It makes me feel that dell doesn't bother the many problems to which I have with their products (within a year) after they had my money. So now it seems that I have no other choice than spending more money on what is essentially a laptop pretty new.

    I write this to 1, event on the multitude of issues I had with my product dell and the customer support less useful that I received and 2, I was hopping someone could tell me what could be wrong with my laptop and how can I fix this (because I absolutely need fixed for the April 7).

    Again, here is my problems with the laptop: dell inspiron 7720

    -stop while playing a game (worked very well in advance)

    -l' laptop does not respond when I push the power button

    -the charger seems to be working fine, blue light turns on when I plug it but turns off as soon as I plug it into the laptop

    Thank you for future assistance, and I look forward to your response.

    DOM

    Best of this post in the Customer Care Forum, here:
       
    http://en.community.Dell.com/support-forums/customercare/f/4674.aspx
         
    Bev.

  • Error occurred in making the disc of recovery with Dell backup and recovery

    Mr President.

    When I was doing a System recovery DVD with Dell backup and recovery when all steps were completed and finally when he was checking the disc a dialog box appears showing "AN ERROR has OCCURRED". How to get rid of this error?

    Please answer fast. Any suggestions will be appreciated

    Thank you

    Hey Himanshu Teli,

    Please provide the model of your operating system and Dell. I would also recommend that you try a flash instead of a DVD disc.

  • Dell Inspiron 15 5000 came with Dell Webcam Central.

    Hello

    My Inspiron 15 5000 came with Dell Webcam Central preinstalled as it should. I checked my Dell downloads, but it is not there on the list of downloadable software.

    Anyone know how can I get Webcam Central?

    Thank you.

    Hi mm132,

    If you have recently purchased the system and assuming it came with windows 10. The camera in the startmenu application is a substitute for the central webcam, except if specified in the order. If the Native windows application does not all the functions of the Central webcam, it's the native application in windows 10

  • disappointed with dell

    I continue to be disappointed with dell.  for many years, I bought a new dell every year and has always been very happy with them.  I went to dell for my last purchase and could not complete because the ability to design my own apparently was not available.  Unfortunately, I went to Toshiba and bought a computer.  now, I'm back to dell, in the hope that they would have solved their problems and I was still able to get a computer of my design, but again am disappointed.  now I'm going to find me a competitive company that will allow me some choices in my design of the computer

    Hi JLBaud,

    Thanks for posting.

    Apologies for not being able to configure a system exactly as you wish. Everything most computer manufacturers have disappeared with the most common configurations that customers want. We have systems that are more configurable than others, have you checked the plug or on the lines of Latitude and Precision?

    Hope this information helps.  Let me know if you need help.

    Kind regards
    Robert

  • Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

    Silverlight has been installed on my dell with media player and after that the tuner has stoped running silverlight would have something to do with it? I get a low rate and no signal tuner.

    Hello

    Thanks for the quick response.

    What web browser do you use to access the links in my previous post?

    If you use Internet Explorer, I suggest to optimize Internet Explorer settings and check if it works.

     

     

     

    How to optimize Internet Explorer

    http://support.Microsoft.com/kb/936213/ro

     

    Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

     

    If the problem persists, you can reinstall the drivers for the Tuner card and check with the question.

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  • Windows 7 Home Edition Premium and Linksys E3000 and configuration problems with Dell/Broadcom half mini wireless 1501 wireless adapter DWLAN

    I'be been on the net looking for an answer requarding my Linksys E3000 router and my card adapter Mini PCI Dell/Broadcom DWLAN (DraftN) haf installed on my laptop Dell Inspiron N7010 XL 17 R and the inability to configure the card so he gets the same speed-172 wireless MBps_ as does our HP Vista Home Premium SP2 Laptop and Desktop! Yes, I spoke with Dell who seem to think that all their problems Tech and resolutions can be found with their technicians of the Manila-based Super (Word of warning-do NOT enter into the world of the concierge program of Dell Tech who, after having been assured it is based in the United States, I agreed to be a beta tester and lost my harddrive despite numerous attempts to stop the technicians to access remotely to do stupid things - but the new live Webcam and learn the hard drive but got none of my software original Dell with it as promised, too - another story). In any case, after playing with the DWLAN share of Dell said they question-nope Linksys ' cuz of course my other two computers would be quick at the speed they do. So I get ahold of Comcast, who of course told me, it's a matter of DELL. I have the WPA2 encryption on a network secure, but because my router there is no way to set up a "secure" network guest unless I have disable access to him (seems odd, he says: it is not guaranteed when someone trying to pass over the network, has knowledge password-weird with this router) it is anyway with this mini half DWLAN and the fact that it is not near the speed as the two other wireless adapters. My problem is with the speed I found all kinds of tips for use between Comcast Modem and Linksys router to make your network hum. What I want for now is someone to tell me how to configure this adapter on this Dell computer, so it does the job, it should. I have a program of diagnosis with her and from what I see, I must get off channel 1 as there is too much interference, but before I go and change the settings of the router, I want the adapter to work - especially since it's about 100 Mbps slower than our other wireless adapters. Does anyone know what should be the correct settings for this DWLAN 1501 or that I now need a new adapter in this laptop as well? Thanks for your help.

    LindaSView

    Hi Linda,.

    Have you tried to forget an instant wireless and bypass the router and cable connect directly to the modem to see if you get the speed you want in this way?  Yes, I know that this means to temporarily suspend the internet connection to the local network and also means the creation of a special no wireless connection for this computer.  But it could help determine if the problem is the computer and the router or wireless adapter - which excluding at least.

    If it works fine, then you can pass the wireless problem.  Otherwise, if it is still slow with a direct link, then you may need to consider another problem is involved and the router and adapter can actually be very well and you need to focus on all that is the bottleneck.

    I'm suggesting this to eliminate the possibilities that can be the underlying cause, while you spend your time on the development of bad (although I admit that I think that you are right and it is more likely - it can be useful a test just to be sure).

    Good luck!

    Kosh

  • Error when adding a new section with SQL in application websheet

    Get the following error while adding a new section with inside on an existing page SQL query in websheet request.

    ()This is the first time I tried to add a SQL query to an article in a websheet. Is that suppose to work?)

    You can see that access SQL and PL/SQL is already enabled for this application websheet.


    After trying many things, I found the 'access SQL and PL/SQL' must be enabled at the level of the APEX INSTANCE also.

    This is how to do it:

    (1) connect APEX as a forum admin with the following credentials:

    workspace: internal

    user ID: admin id defined during the installation of the apex (usually, it will be admin only)

    password: admin password set during the installation of the apex

    2) click manage the Instance > feature Configuration

    (3) select Yes to enable access SQL in Websheets

Maybe you are looking for