10 windows on Thinkpad 10 no touchscreen or pen

Similar Questions

• Disable the touchscreen in the operative part of Windows 8, but no entries of digitizer pen

  Currently, I bought a tablet of 10 Lenovo's Thinkpad.

  When you use the stylus to the digitizer to write using Windows Journal for example, I keep getting unwanted tickets at the touch of the hand.

  I noticed from previous posts that you can disable touchscreen input manually by disabling the device corresponding through Device Manager.

  Is it possible to disable the entry of the touch screen, while keeping the digitizer input active in Windows 8?

  Kind regards

  Alan

  I don't know who, but I know that newspaper is deprecated in favour of OneNote, which has a Tablet and a desktop version freely available on all platforms. There rejection button better and more modern, you can try it.

• Problems installing Windows 7 Thinkpad X 220 (4BG-4291)

  Hello

  I just bought a new laptop a Lenovo ThinkPad x 220 (4291-4BG). I want to do a clean install of windows on them. I downloaded windows 7 ISO professional from the MSDN site. For the installation, I do like the Fallows.

  1. press F12 at startup to boot from my external DVD device (Samsung SE-S084C)

  2. the boots of the installation and I get select language. Chose Swedish to keybored and English for the rest.

  3 familiarize yourself with tap install buton now all fine so far.

  4. now, I get an error message indicating the error in the picture below

  Link to photo

  5. I have the numbers he needs a driver for the storage controller. Downloads the driver of storage card for my laptop from lenovo site adding via a USB key. And all ok lokes is picture below.

  Link to photo

  6. following Clickes and it takes a minute and then I get the error set-aside. Self image below

  Link to photo

  And here im stuck. I tried to allsow different ISO from MSDN with SP1 files and without. Were also start the installation of the same USB problem. Factury default BIOS will be reset. The BIOS is set to AHCI mode for the drive. Have updated the BIOS to the latest version 1.24 to BIOS information below

  Link to photo

  I also tested one bot UEFI using the guide from the link below.

  Installation of Windows 7 with UEFI boot on an x 220 USB

  Then I try this guide that I come to the start menu to select the boot device, but then I select my USB it will blink for a few seconds, then returns to the menu select boot device.

  I hope that someone may have an ide how to solve this problem. Any help is welcome . Sorry if my English isent the best.

  Thanks in advance

  Concerning

  Magnus

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  Magnus, welcome to the forum,

  According to the OTM your system has a processor i-7, so he should have USB 3.0. Please try to install the system and make sure that only use USB 2.0 ports.

  Hope this helps

• DeskJet 895Cse does not install on Windows 7 ThinkPad business.

  I can't get my DeskJet 895Cse to install on my ThinkPad corporate recently updated (for Windows 7). This machine is 64-bit. The company controls access to windows update - no authorized automatic connection.

  I have a 32-bit personal ThinkPad that I've upgraded to windows 7 and the deskjet installed correctly by using the windows update connection.

  How can I get the correct direct drivers so that I can thumbdrive load into my corporate ThinkPad?

  There are two possibilities:

  1. Go to start, devices and printers, add printer, seleect some dummy port as LPT1:, and when the list of printers, click Windows Update in the lower right.  (This is different from the normal Windows Update and may be feasible).  The list will take several minutes to update, after that, you can cancel the installation and then simply plug the USB cable to the Deskjet 895 and the pritner would install automatically.
  2. If the foregoing is blocked from another computer then visit the Microsoft Update Catalog site using IE (no other browsers not supported).  Search for Deskjet 895cse and the driver for Windows 7 64-bit is the file which is 11.6 Mb in size.

• Driver Windows 7 ThinkPad Power Management (beta)

  The driver is available on this web page: Site of Driver Lenovo Windows 7 beta

  We will use this post to discuss the beta version to ThinkPad Power Management driver (only)!

  On SL500 said that there is no battery installed?

  EDIT: solved. Sugested new download Action Center driver hotkey and after management hotkeys and power installation work very well.

• Two monitors L2206tm - Windows 7 - can all both touchscreen make?

  I didn't realize the L2206tm is a commercial monitor and I posted about it in the forum of home monitor products, then I copy the post here. I hope you guys can help me.

  I have a custom desktop computer and I recently got two HP L2206tm monitors because they were on sale. My computer running Windows 7 Ultimate 64-bit. I have two monitors connected USB ports on the desktop, but if I touch one of the screen of one of them, the click or scroll or any action that happens on the other monitor. Is it possible, and if so, what is the easiest way to set up two monitors to use the touch screen feature? Is there a software to help make this process easier?

  AFAIK, you can't touch on two screens in the calibration mode. In Clone mode, it works; but it's probably not what you're looking for.

  You can try the below:

  Use the 'Tablet PC Settings' in the ' Control Panel/hardware.  Under 'Display Options', select a touch screen, hit calibrate, move the text to the selected touch screen while pressing on enter (incase you have extra monitors) then MOVE your mouse to this screen and click on the text.   Then calibrate the monitor and following the instructions in the calibration.  Once the first monitor is installed, follow these instructions again for each additional touch monitor.

  Source: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/does-windows-7-support-dual-touchscreen-monitors/e86ac4fa-5321-45c1-a1d8-0ca95fdcfc17

  Thank you

  Sasi

• Why ('ontouchstart' in the window) is false on a touchscreen tablet with Windows 8

  I use Java Script to determine if my website is running on the tablet device
  The device is Assus tablet with windows 8

  Are you assuming that the return value is false, because it is not true? According to this, the null is returned instead of true sometimes. If false is returned in fact, then I think it's a fault with the Tablet browser. This either in the browser settings there are options to pretend the camera is something else (for testing purposes); There is no reason why they should be selected by default however.

  If this was any help then please give us more details (for example, the browser you use).

• Acer Aspire S7-391 Windows 8.1 Issus with touchscreen and Trackpad

  Hello. I've just upgraded to 8.1 Windows, everything went well, but I realize now the touch screen is much less reactive than before, and many times I have to touch twice to make the action, something that never happened to me before with Windows 8.

  ¿Any suggestions?

  Another thing is the trackpad, which for example now does not scroll with 2 fingers and other things that did before.

  Thank you

  PROBLEM SOLVED WITH THE TOUCH SCREEN!

  Go to the Device Manager and look at the Human Interface Devices. There will be some USB devices that end up being the touch screen. If you change the options of feed on those so they don't turn off to save power, the problem should be solved.

  Please let me know how it works for you.

  I have an Acer S7 391.

• Stuck in 'Print to file' in Windows Vista, Thinkpad R61

  The last time I tried to 'Print to File' a .txt file, a file was created, that I could not open with various software (never had a problem in the past).  Now I can't print any file on my printer, even if the Print to File is not checked.  It is not the printer because I can print a test page to the printer.  I tried to disconnect and reconnect, defragmentation and restart.  Run the utility on the hard drive, no problems identified.   What should I do now?  Thanks for your help.

  Hello

  Welcome to the Microsoft community. I understand that you have a problem with the printer does not print. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. What is the brand and model of the printer?

  3 yu make changes to the computer recently?

  4. what security software is installed on the computer?

  Method 1.

  Start your computer in a clean boot and try printing. A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  Method 2.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Refer.

  Print to the file: http://windows.microsoft.com/en-US/windows-vista/Print-to-file

  Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  I hope this helps.

• Windows 8 and workstations without touchscreens

  Given the lack of features of Windows 8 is installed on desktop computers (not to mention, laptops) that don't have touch screens, why didn't everyone (Microsoft) offered a downgrade to 7? Without the screen touch Windows 8 is just awkward - especially, stop. I bought a P6-2350 for a customer and sooned learned that the customer really couldn't use it. Now, I'll have to buy a copy of 7 to make them happy. It is simply not true.

  Hello

  Microsoft will allow users of Windows 8 Pro to downgrade their new PC to Windows 7 or even Vista, depending on the operating system of the license agreement.

  Not surprisingly, users cannot downgrade to Windows XP still-used-but-slated-for-retirement.

  Demotion - which allow customers to replace a newer version of Windows by an older edition without paying two copies - is only available in Windows 8 Pro.

  Which corresponds to the previous practice: only Windows 7 Professional, for example, has been allocated downgrade rights.

  I hope this helps!

  * By clicking on the laurels! White Star is a great way to say thank you on any post that you helped or solved the problem.* *.
  * By selecting 'Accept as Solution' for an answer that solves your problem helps others who are searching the Web for an answer *.

• ThinkPad Tablet 2 set button pen

  Hey all, I have ThinkPad Tablet 2 with the Wacom digitizer and an active stylus. The stylus a button on the side which the manual says is for screenshot. I would like to configure this button to be identical to a right mouse click on the button (I'm not a fan of the tap water then hold list drop-down functionality of the right mouse button trigger). To make this I:

  -Search 'calibrate' in Win10

  -went to "calibrate the screen for pen or press ENTER.

  -On the dialog box opened, I clicked on the tab 'other '.

  -J' clicked on the link "Go to Pen and Touch" under "configure your pen and tap Settings in pen and touch.

  -An open windows error dialog box that says:

  "Tablet and pen settings is not available. For assistance, contact the manufacturer of your tablet PC. (error = 0). »

  So here I am and here are my questions: why these settings are not available? Is there another way to configure the associated stylus button action? Thank you!

  Problem solved. I uninstalled Windows 10 and reinstalled and the pen settings are now available and more screen auto-rotation, now working as well. I find this strange because I makes no other changes to the Tablet and I was running any other software before, during and after my first upgrade of Windows 10. I guess an update has been published or there was a quirk in my initial upgrade of Win10. In any case, all's well that ends well

• ThinkPad Helix: Is the included pen?

  Hello

  I want to buy a thinkpad propeller.

  Display technology specifications is:

  11.6 "400nit Full HD (1920 x 1080), digitizer and Pen, Intel Centrino Advanced-N 6205 S (2 x 2 AGN), 2MP camera, camera 5MP 1080prear 1080 p

  Digitizer and Pen means? The device is VAT included with a pen, or he is able to utilizeing a pen?

  How can I determine if the device has a pen?

  Please help me!

  If the model of your purchase is a digitizer, then it will be delivered with a stylus. The pen has a location conveniently located in the upper left corner of the portion of the slate of the machine. If the model you buy does not have a scanner, then it will ship with a pen. You can refer to the thread below for details, but what I wrote here about is the short of it.

  http://forums.Lenovo.com/T5/X-series-Tablet-ThinkPad-laptops/can-I-add-a-pen-to-Helix-if-it-didn-t-c...

  What I hear in what respect love the Pan is to love the specific pen that comes with the propeller in the box. It is pretty thin and small, so if you have big hands you will find written with her bulky. It's yours if you prefer a different pen. As long as your propeller has a digitizer, any pen should work.

• completely dead touchscreen and pen input tm2t

  I have a laptop (2100) aged 2 weeks of tm2t and his touch is quite dead...

  I have reinstalled the operating system...

  bios update

  updated graphics drivers

  update of wacom drivers

  After doing all of these things as his does not work... someone can help me pls...

  Here are the photos I took wen I open my laptop
  as noted by 2 screws are lower rubber
  and the third screw is as shown on the picture below
  I removed the screws 3 on the picture

  

  There will be 4 screws that hold the LCD screen
  I have removed the screws and took a pic...
  

  .. Unscrew them and gently lift the LCD screen.

  

  Here is an end to the top of the connecting wire...
  

  HP knows that this kind of connector gives the problem, they had put a Ribbon on this connector...
  I removed the tape, pushed the cable to the connector and put the same band that was already show...

  

  Boot the system and the touchscreen made, perfectly functional

• Fingerprint reader not working not not on ThinkPad T450s on Windows 10

  The reader of the FP does not work on my T450s on Windows 10, even if drivers "Synaptics PS sensors (WBF) (PID = 0017)" are correctly installed.

  I can get into the Setup Windows Hello of fingerprints (screenshot below), but the reader of the FP doesn't do a thing.

  Following the suggested steps in Fingerprint-support-on-Windows-10-ThinkPad-T440-and-newer does not change.

  The laptop is "new" and I didn't Win 7 or 8 before to test drive the FP, but the driver is installed without any problem - so I guess this isn't a hardware problem.

  I'm happy for any suggestion.

  

  

  Problem solved. Indeed, it's a hardware problem.

• OEM of Windows 8 key does not not on touchscreens of Voltron

  Windows 8 RP and CP worked great with Windows 7 display driver touch touchscreen NextWindow Voltron, but in Windows 8 for OEM, the capability is part, even after the installation of the driver. It is a touch screen in common (HP, Dell, Gateway AIOs, etc.), and as noted, he has worked with all the beta versions.  If someone knows a solution?

  Hello.

  I can verify this, but for a different computer. The problem is the OEM version.

  I found in the Support section:

  
  

  "Windows 8 System Builder versions require certified hardware Windows 8 to activate touch."

  
  

  So, there is a difference of OEM and the oder versions of retail upgrade. In reading the other posts, it seems that it is controlled by differnet, not by different versions license keys...

  That the why it worked in Preview versions and work in upgrade versions too without problems, but not in OEM - he just "limited"...