1033 blue screen when using my computer.
Hello everyone, I have problems with blue projection. Here is the error after that I reload that appears:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
More information about the problem:
BCCode: 1000007e
BCP1: FFFFFFFFC0000005
BCP2: FFFFF88000E0EA1D
BCP3: FFFFF8800351D488
BCP4: FFFFF8800351CCE0
OS version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\021415-21559-01.dmp
C:\Users\Michael\AppData\Local\Temp\WER-23197-0.SysData.XML
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt
---------------------------------------------------------------
I can say im begins to bluescreen because my wifi card allows to disable, my music stops and the system bluescreens second after that.
Here's the last crash: https://onedrive.live.com/redir?resid=FC1021A2A3E89D7F! 106 & authkey =! AINQYUbCRBYAbys & ithint = the file % 2cdmp
Thank you, please help this is a new system and I don't know who else to turn to the best!
This phenomenon was related to athur.sys NIC CB42, CB43, MB42, MB43 of Atheros Communications, Inc.
I remove the current driver and then install the most recent driver available.
Tags: Windows
Similar Questions
-
Blue screen when using wireless network
Hi, I had a problem with the wireless network.
I use the laptop and when I turn it on, blue screen after a few seconds.
Here is the info on my comp. (small old model)
OS: Windows XP-84 x
CPU: Pentium M
Graphics: ATI Radeon 200M
Network card: 802. 11b / g Wireless adapt (from Ralink Technology)
This is the content of the blue screen (I SKIP a part which is NOT NECESSARY)
A problem has been detected...
Driver_IRQL_NOT_LESS_OR_EQUAL
If this is the 1st time you have...
Check that any new hardware...
If problems continue, disable or remove...
Technical information
STOP: 0X000000D1 (0X696C8636, 0X00000002, 0X00000000, 0XAD8F7CD9)
RT2500.sys - address AD8F7CD9 base at AD8E1000, DateStamp 42675c 99
Beginning dump of...
Physical d'Instruction dump...
Contact your system administrator.
It's very uncomfortable. I can't take the computer in a foreign place...
Here's a page on the general bsod help.
The DRIVER_IRQL_NOT_LESS_OR_EQUAL bug control has a value of 0x000000D1. This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
I suggest you goto, Ralink Technology site and download the latest version of network print driver. Even if you have not made it clear if that is indeed the network card or wireless adapter. Anyway I'll make sure update you both of them. I would also do that windows has all the latest updates.
-
How to stop the computer to go to "blue screen" when not in use. In other words, how can we not shut down the computer for a ~ 10 hours?
Arthur
Please keep all your messages on the same topic in the same thread / conversation.
Click on the following link to access your profile
http://answers.Microsoft.com/en-us/profile/798d7b71-764c-E011-8dfc-68b599b31bf5
Click Edit profile and check the box in front of notification by e-mail.
A suggestion if you are using Internet Explorer 9, 10 or 11.
Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.
-
Hello I'm in safe mode because it's the only way to get to my desk, it blue screens when I try on a regular basis, how to do a system restore or restart in safe mode?
Hello
Do a restore of the system using the same safe as you would in Normal Mode.
http://bertk.MVPs.org/html/restoresysv.html
http://www.computer-answers.info/maintenance/Vista/How_to_Use_System_Restore.php
See you soon.
-
Blue screen when you unplug the power of the computer dell laptop XP
I have a dell latitude E6500... problems with blue screen when I unplug the laptop. his past about 5 out of 10 times now. Ive updated all recommended microsoft updates and it is still the case? is there a driver for xp needed to solve this problem? It only happens when I unplug the power cord and it happens as soon as I unplug
Hello suncoastsrq,
Usually, when we see problems during shutdown, the cause is something that loads at startup.
To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:
http://support.Microsoft.com/kb/310353
http://support.Microsoft.com/kb/316434
Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.
In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.
You can download the dump Auggy's previous suggestion?
Let us know.
Best regards
Matthew_Ha
-
Windows gives me a blue screen when I try to upgrade my Dell 650 Intel Xeon cpu (2) a 4.2 GHz to a 3.6 GHz
Hi, I was wondering if I need different software or? Tent for upgrade achieve performance more than one old computer. When I turn on the computer, it starts to initialize, then turns on the blue screen, all new material that was added. 3.6 GHz was also used in the 650's. Just by looking at the cpu they look the same to me. Any ideas is better than what I have now. Dell number is 4QXB451
This isn't the site for these answers... Try intel.com/support/cpu
Youre pc requirments are based on the chipset boards, chips intel only run with
the default CPU.
-
LifeCam is at the origin of the problems of "Blue screen" when you try to close?
I get a blue screen when you try to stop, we have identified the "Lifecam can be the cause of the problem?
Hello
Thanks for posting your query in the Microsoft Community Forums.
According to the description of the problem, I understand that you get Blue Screen of Death, when you use Lifecam on Windows 7 computer.
We're here to help and guide you in the right direction.
I suggest you to consult the help article and check if it helps.
Method 1
I suggest you update drivers lifecam and check if this may help,
Updated a hardware driver that is not working properly
Update drivers: recommended links
Method 2
Visit the link mentioned for more information below.
Resolve stop (blue screen) error in Windows 7
Note: System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.
Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Note: Reinstall Windows 7 will remove all the programs you have installed and restore the default settings of Windows. You will need to restore your user files, and reinstall all the programs you've installed using the installation disk or the original files.
It will be useful.
Let us know if you encounter problems under Windows in the future. We will be happy to help you.
-
Blue screen when I upgraded to ios 9.2 to 9.3.1 on my iPad air. Help, please
Try recovery Mode
Connect your device to your computer and open iTunes.
When your device is connected, force restart it: press and hold the sleep/wake and home for at least 10 seconds, and only release when you see the Apple logo.
Keep now until see you the recovery mode screen and wait that he eat.
Restore as New first, then restore sauvegardΘ if you wish.
-
Get the blue screen when you create a new message or the response message in OWA Exchange 2007
Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)
Hello
I suggest you post the question in the forums and check them off below if it helps:
http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/
It will be useful.
-
Get a blue screen when loging to AOL. How can I fix?
Original title:
Get a blue screen when loging to AOL. How can I fix?blue screen when I try to open aol why is what is happening, that it only happens when I try to open aol
Internet explore is fine
Hello
1. did you of recent changes to the system before the show?
2. do you get an error message?
3. do you have security software installed on your system?
Method 1:
Follow the link below, start in safe mode with network and check if the problem persists.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
If the issue is fixed in SafeMode with networking, I suggest you perform a clean boot and check if it helps.
Method 2: Perform a clean boot.
To perform a clean boot and see if the problem still occurs, follow the steps in the below link.
http://support.Microsoft.com/kb/929135
Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.
Method 3:
Follow the link below, check if it helps.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7 (Applies to Windows Vista)
In addition, check out the link below and check if it helps.
http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=223529
Let us know if it helps.
-
I got a blue screen when stop or restart during a display shows stop and blue bg (Windows Vista Business)
After starting my Windows I got these message below
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6002.2.2.0.256.6
Locale ID: 2052More information about the problem:
BCCode: a
BCP1: 00000000
BCP2: 00000002
BCP3: 00000001
BCP4: 82E9837B
OS version: 6_0_6002
Service Pack: 2_0
Product: 256_1Files helping to describe the problem:
C:\Windows\Minidump\Mini041011-01.dmp
C:\Users\TanXR\AppData\Local\Temp\WER-104083-0.SysData.XML
C:\Users\TanXR\AppData\Local\Temp\WER8B1F.tmp.version.txt
C:\Windows\Minidump\Mini041011-01.dmpView your dump using file:
BlueScreenView v1.32 - seen BSOD (blue screen) crash information stored in the dump files.
http://www.NirSoft.NET/utils/blue_screen_view.htmlFor each accident displayed in the upper pane, you can view the details of the drivers of the devices loaded during the crash in the lower pane. Do a search on google for the drivers to know what device belongs to uninstall, reinstall, or download the latest driver from the manufacturer website.
-
Windows 7 went blue screen when the sleep mode is activated
Hi, it happened that Windows 7 X 64 went blue screen, when my PC has been set to the standby mode. I received the following from the Windows Event Viewer:
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 11/03/2014-17:39:30
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: my PC
Description:
The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000005, 0 x 0000000000000008, 0 x 0000000000000000, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 110314-22510-01.
The event XML:
1001
0
2
0
0
0 x 80000000000000
17265
System
My - PC
0x000000D1 (0 x 0000000000000005, 0 x 0000000000000008, 0 x 0000000000000000, 0 x 0000000000000000)
C:\Windows\MEMORY. DMP
110314-22510-01
Dweng
This phenomenon was related to mv91xx.sys magni Windows Driver of Marvell Semiconductor, Inc. Yours is 4 years and more. I remove the driver and install the latest driver available.
-
blue screen when I try to develop my raw photos
I downloaded the trial of lightroom version, and my raw photos look like blue screen when I try to develop. I can view them in the library, but not develop... I assume this has something to do with camera raw, but I have no idea how to solve. If anyone can help?
I'll tell you the information that I found on the web:
-In the list of supported cameras, it says I need - like version minimum - 5.4 of Camera Raw plugin and at least 2.4 version of lightroom.
- And system information that appears in the trial version of lightroom is:
Version of Lightroom: CC 2015.4 [1060496]
License: Trial
Operating system: Windows 10
Version: 10.0
Application architecture: x 64
System architecture: x 64
Number of logical CPUs: 4
Processor speed: 2.5 GHz
Built-in memory: 8097,1 MB
Real memory for Lightroom: 8097,1 MB
Real memory used by Lightroom: 658,2 MB (8.1%)
Virtual memory used by Lightroom: 2411,3 MB
Memory cache size: 3.5 MB
Maximum thread count used by Camera Raw: 4
Camera Raw SIMD optimization: SSE2, AVX, AVX2
System DPI setting: 144 DPI (high DPI mode)
Composition of the Bureau enabled: Yes
Exhibition: 1) 1920 x 1080
Entry types: Multitouch: Yes, built-in touchscreen: Yes, built-in pen: Yes, touch external: no, external pen: no keyboard: Yes
Graphic processor News:
Intel(r) HD Graphics 520
Check the supported OpenGL: past
Vendor: Intel
Version: 3.3.0 - Build 10.18.15.4279
Renderer: Intel(r) HD Graphics 520
LanguageVersion: 3.30 - Build 10.18.15.4279
The application folder: C:\Program Files\Adobe\Adobe Lightroom
Library path: C:\Users\Celina\Pictures\Lightroom\Lightroom Catalog.lrcat
Settings folder: C:\Users\Celina\AppData\Roaming\Adobe\Lightroom
Plugins installed:
(1) home canon Plugin
(2) Facebook
(3) Flickr
(4) attachment Plugin Leica
(5) attachment Plugin Nikon
Config.LUA flags: None
Map #1: Vendor: 8086
Feature: 1916
Subsystem: 804e103c
Revision: 7
Video memory: 128
Map #2: Seller: 1414
Device: 8 c
Subsystem: 0
Revision: 0
Video memory: 0
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Conexant HD SmartAudio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: LR5x102
Direct2DEnabled: false
GPUDevice: not available
OGLEnabled: true
In Lightroom, try Edit > Preferences. On the performance tab, uncheck the box use Graphics Processor.
-
Just install lightroom cc, when put a picture to develop a module to be only a blue screen when the preview go but everything's ok
Try to edit > Preferences > Performance and uncheck "use graphics processor.
-
Satellite P200D-12f PSPBQE - blue screen when waking up from sleep
Hello again!
I feel blue screen problems when I close my laptop and open it again (while he wakes up).
It says something about Ati blah blah.I find that very annoying reseting every time the PC cuz he went to sleep... any1 has / had similar problems?
What can I do about it? I had b4 of win xp on my laptop (toshiba don't support even xp for this model) and it worked perfectly, even not a problem... and now with win 7 I have millions of problems and win7 is supported!
> I feel some problems blue screen when I close my laptop and open it again (while he wakes up).
> It says something about Ati blah blah.Blabla ATI means that the BSOD is related to the ATI graphics card chip or graphics card installed driver.
If Win XP worked perfectly, then the problem must be caused by software installed. Maybe the graphics driver...
I recommend the update driver graphics card and if necessary, update the BIOS.
Maybe you are looking for
-
15 HP smart touch: pink and green line Horizontal on my touch screen 15 HP smart
Hello I'm having this problem a few months ago August 2015 rose with a combination of a green horizontal line appear in the middle of my screen with in a few days later the line moved to the taskbar line I said to my self "Yes, I can work with that "
-
no option to change the password
My husband has just reset his password gmail from your android phone and need to change it on the desktop mac, El Capitan 10.11.2. However, when you go to the post office; Preferences: account; account information no longer exists and ability to cha
-
Satellite A100-225 is not charging even with new battery
Hi, having a problem of load. Laptop turns off suddenly while using. Tried to start but power light turns off and it stops again. With connected battery and ac adapter on the power light blue and yellow light of the battery lit a few seconds and then
-
I've lost many emails for periods of dates, including last month. What happened twice recently. I have remove the individual emails regularly, but not in batches. How to recover those lost?
-
WRT160N problem, Cant update firmware (downgrade) PLEASE HELP!
At this router running for a few weeks. Its got that * beep * problem connection but just today, it is even worse. Every 30 seconds or so, he will lose to the modem and internet connection for about 2 seconds. So even if I try to update my firmware u