10g Express to the Apex 3.1.2 update problem
I have Oracle Database 10 g Express Edition Release 10.2.0.1.0 installed on windows XP. I want to develop an application using oracle express (apex), so I thought it would be a good idea to upgrade the apex (of the 2.0 default apex supplied with 10g xe) at the latest, free 3.1,2 before you start. I tried to update twice & it failed. Without going into a ton of details, from errors in the paper that I saw every time, it seems that the installation script, apexins.sql, expects 1 parameter to be the default tablespace instead of the password. Any ideas on this subject?My other questions are:
1) before moving on to rel 3.1.2 can I first create the user/passwd apex? The doc did not initially create the account. (so I did not). It is said apexins are the followiing, but errors in the newspaper that I seem to disagree:
@apexins < password > < tablespace_htmldb > < tablespace_files > < tablespace_temp >
< images > < connect >
(2) I'm following the instructions for apex rel 3? From what I read, I think I can go directly from apex rel 2.0 to 3.1.2. I found 2 different install docs for module 3 and they were different. The two documents supposed to run change passwd script (apxchpwd) after installation, but a doc editing had 2 additional scripts (which I did not work). Can someone tell me please for the right installation instructions?
(3) after research I found an old 2.2 installaction apex tutorial that says you have to install HTTP before the APEX. Apparently I misinterpreted the doc 3.1 install it says http was already included in oracle 9.2 or later. I guess I don't have no need to install HTTP since oracle xe is rel 10. Now, I think I have to install HTTP from the accompanying CD first before moving on to APEX 3.1.2. Is this correct?
(3) it is said that it takes in the SYSTEM tablespace for apex 3 85 M. the size of the system tablespace is 76800 (default).
Should I increase it before attempting to upgrade again? (I've waited the defect of being large enough since the apex is delivered with the db)
(4) suggestions/advice for starting more are welcome! Again, I've seen 1 > doc on the way to a bad installation of cleaning. Both said to drop the flows_0300 user, but I told exec wwv_flow_upgrade.switch_schemas, I did until I tried the 2nd install. Am I supposed to run the switch_schemas or not to bad cleaning install? In addition, in the troubleshooting doc I don't see an option to call switch_schemas for my apex release (2.1) so I just followed the examples and by the following 'FLOWS_020100 '. for the parameter "FLOWS_020200". Was it a good or bad idea?
(5) is there any other software (i.e. application, server?) that must be installed before or after the apex 3.1.2? Anything else I missed? The documentation is unclear and has omissions.
Thank you.
Hello
I guess you do this on a Windows-based computer and Apex 3.1.2 has already been downloaded from the Web Application Express page and will use the http port 8080.
NOTE: Make sure your Oracle XE database does not automatically start when Windows starts. If this is the case, then remove gently Oracle Database XE before proceeding with any of these steps.
Step 1: Unzip Apex in an appropriate place (preferable "c:\oraclexe\apex").
Step 2: Start a session SQL more than c:\oraclexe\apex and connect as a 'sysdba '.
sqlplus / as sysdba
Step 3: Install the Apex.
SYSAUX SYSAUX TEMP/i +@apexins / +.
Step 4: Reconnect the server Oracle XE.
Step 5: Assign/Set PATH to APEX of the images in the APEX_HOME folder where we decompressed APEX that is c:\oraclexe.
+ @apxldimg. SQL APEX_HOME +.
Step 6: Assign / define credentials administrator to the APEX.
+ @apxxepwd. SQL votre_mot_de_passe +.
Step 7: Restart the Oracle XE database.
Step 8: Top configuration completed. The availability will be as follows:
Availability of apex: http://localhost: 8080/apex
Administrator of the apex: http://localhost: 8080/apex/apex_admin
Follow these steps and let me know if it works for you or not.
Kind regards
Naveed.
Tags: Database
Similar Questions
-
Problem on 10g Express using the join (+), but works on the standard of 10 g
Good day to all,
I'm having a problem with the following query:
Select srds.specific_date, l.DayCntr
from (select rownum add_months (sysdate-1) + * 5 as Specific_date of object where rownum < 35) RRD.
(select rownum as DayCntr object co where rownum < 35) l
where < 32 l.DayCntr
and l.DayCntr = (to_number (to_char (srds.specific_date (+), 'DD')))
and ((srds.specific_date between add_months(sysdate,-1) and sysdate)
or (srds.specific_date is null))
order of daycntr;
On 10g express, not all rows are returned as expected, minimum of 31 lines, sometimes getting 20
whereas on 10g Standard it doesn't, any ideas?
Thank youIf your application runs on your 10g standard, then the problem is not fixed the problem, it's that your standard version of Oracle 10 g... for me your initial query works 10.2.0.3 or XE...
But I think that this application can help you,
@XE> select srds.specific_date,l.DayCntr 2 from (select specific_date 3 from (select add_months(sysdate,-1)+ rownum * 5 as Specific_date 4 from all_objects where rownum < 35) s 5 where (s.specific_date between add_months(sysdate,-1) and sysdate)) srds , 6 (select rownum as DayCntr 7 from all_objects oc where rownum < 35 ) l 8 where l.DayCntr < 32 9 and l.DayCntr = (to_number(to_char(srds.specific_date(+),'DD'))) 10 order by daycntr 11 ; SPECIFIC_DATE DAYCNTR ------------------- ---------- 1 2 3 4 05/11/2008 16:19:25 5 6 7 8 9 10/11/2008 16:19:25 10 11 12 13 14 15/11/2008 16:19:25 15 16 17 18 19 20/11/2008 16:19:25 20 21 22 23 24 25 26/10/2008 16:19:25 26 27 28 29 30 31/10/2008 16:19:25 31 31 rows selected.
This is the output you want?
Published by: dask99 on November 21, 2008 16:20
-
Display after the XP service pack 2 update problem
I installed the XP 2 service (Xp pro) on my Satellite Pro 2100 and since I was on the right side of the screen a black border that is not used about 2 cm wide.
Is the same reported problem of pLippo (17-Sep-04 22:53) with the same subject.
This problem prevents me to install SP2, can anyone help?
Thanks in advance.
Enzo
Hi Enzo,
in a first time, you must uninstall and update your display driver.
I thik this helps because "gfan" had the same problem with a laptop computer and reinstalling solved the problem!
Antoni Bye
-
Regular expressions in the APEX
I am using the following regular expression ^ [\w\s]+?$, but it does not work in APEX.] I want to validate a field for not accepting anything but the line of underscores, spaces and alphabetic characters.Try to use POSIX character classes:
^[[:alpha:][:space:]_]+?$
Note that you must always provide at least the following information when you ask a question:
-APEX version
-Edition and version DB
-Web server architecture (EPG, SST or APEX listener)
-The browsers used
-Theme used
-Models -
The new Q5 (FEB) blackBerry update problem
I recently updated my Q5 with the new OS update on 19/02/15 and after that update ive had a problem with when I lock my screen or when my phone locks, my touch screen doesn't work (after I unlock it).
Anyone else having the same problems? Impossible to find solutions on the internet and have tried everything for example reinstall update, back up and restore my phone, turn.
Had phone about a year and a half until its probably out of warranty so would welcome any advice!
I suggest you try the method of automatic loader, very clean and very energetic:
Beware that it is completely destructive... the device will be 'as new'... None given, no apps, no accounts, etc. Remember you first take a full backup, as well as make full manual documentation of applications, accounts, configurations, etc. Sometimes a restore reintroduced corruption even sought to eliminate, and manual reconfiguration is required.
You can also use it to return to a BONE earlier if you want... you can install any level of the operating system for which you can find an auto-loader. (Hint... search the site of CB!)
Good luck and let us know!
-
Execution of SQL queries based on user input in the text box on the page of the APEX
Hello
I am new to develop in the APEX, and I encountered a problem...
It is even possible to do such a thing: use the text box to enter a SQL query and then run it on my schema and display the results in the report item? And if the answer is Yes, can someone give me advice on how to do this?
Thanks in advance.In my example, the text is from a file in a text box. The report source is a function returning the SQL query:
DECLARE v_query VARCHAR2 (4000); BEGIN v_query := :p91_sql_query; RETURN v_query; END;
Denes Kubicek
-------------------------------------------------------------------
http://deneskubicek.blogspot.com/
http://www.Apress.com/9781430235125
https://Apex.Oracle.com/pls/Apex/f?p=31517:1
http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
------------------------------------------------------------------- -
Options of the Web server for the Installation of the APEX on Oracle Database 10g
Hello. We are installing an APEX on a test server that runs the Oracle 10 g 10.2.0.4.0 database. As I understand it there are two Web Server Options:
(1) oracle HTTP Server (Apache)
(2) oracle Application Express listener
Do both of these jobs for Oracle Database 10 g 10.2.0.4.0? I thought I remember reading somewhere that only the Oracle Application Express listener only works with version 11 database or higher.Do both of these jobs for Oracle Database 10 g 10.2.0.4.0?
Yes.
I thought I remember reading somewhere that only the Oracle Application Express listener only works with version 11 database or higher.
No, only the restriction (except 10 g XE) applies to the third option of web server that you have not mentioned: Embedded PL/SQL Gateway (EPG), such as discussed in your previous thread: + {: identifier of the thread = 2201975} +.
Requirements for the listener of the APEX
{forum: id = 858} forum
-
Upgrade problem Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition
G gurus ' Apex Day,.
I installed Oracle Database 10 g Express edition in my PC Windows XP, which comes with Apex 2.1 with no problems. Then I tried to update the Apex 2.1 to 3.2.1 (download currently Apex OTN) following the document below:
http://www.Oracle.com/technology/products/database/application_express/HTML/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP is
To change the password for the administrator account, run apxchpwd.sql and then, when prompted enter a password for the ADMIN account.
@apxchpwd
no problems
Then I have connected to SQL * more like SYS by:
sqlplus/nolog
CONNECT SYS as SYSDBA
Enter the password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL > @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the following messages)
PL/SQL procedure successfully completed.
old 1: create the directory APEX_IMAGES as '& images/apex/1 '.
new 1: create the directory APEX_IMAGES as 'Apex3.2.1/apex/images '.
Created directory.
declare
*+
ERROR on line 1:
ORA-22288: file or LOB FILEOPEN operation failed
The system does not have the specified path.
ORA-06512: at "SYS." DBMS_LOB", line 523
ORA-06512: at "SYS." XMLTYPE", line 287
ORA-06512: at line 15 level
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Validation complete.
calendar for: Load Images
Elapsed time: 00:00:00.17
Directory has fallen.
Can someone help me in the topic problems shout it?
I tried to continue by following steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the ADMIN account internal Application Express)
but when I tried to connect to:
http://localhost: 8080/apex/f? p = 4550:1
When I type the credentials
System
System
systempassword
nothing happens
or even if I try:
http://localhost: 8080/apex/f? p = 4550:10
Admin
AdminPassword
nothing happens here too.
I appreciate all the help
Kind regards
CarlosHello
Unpack zip install apex to c:\temp\
then the SQL connection as SYS
run@c:\temp\apex\apxldimg.sql c:\temp
BR, Jari
-
Cannot see items under the node Application Express on the schema of the APEX
I installed 3.1.2 in my database (10.2.0.4) APEX, and I want to explore the developer SQL 1.5.5 / Apex integration feature.
Problem is... when I go on the pattern that has the Apex applications, I see the 'Application Express' node, but SQL Developer shows nothing under (it's just blank).
I'm doing something wrong? I've looked under all the schema associated with the APEX (i.e. flows_030100), but the node Application Express is always empty.
Any help much appreciated.Hello
I think that you must be logged in as owner of the analysis of an application schema to see under the node Application Express.
HTH,
Chris
-
connect the form builder to oracle 10g express?
Hello
How to connect the 10 form builder to oracle 10g express?Developer suite Home use Net Configuration Assistant to create an alias TNS (tnsnames.ora entry).
-
Change password (authentication of the Apex) page
Hello
I use
Apex 4.1
Oracle DB 10g XE
I use Apex of authentication for applications developed by their Summit. The applications work correctly, but I need a page to change the password for the application. I created a normal with 3 fields as HTML page
P8_OLD_PASSWORD
P8_NEW_PASSWORD
P8_RETYPE_PASSWORD
and a button to the item as P8_CHANGE
Button action is 'Submit Page' with validation Execute as 'YES '.
There is a process on the page that runs "to submit after the calculation and validation" with as process source
APEX_UTIL. CHANGE_CURRENT_USER_PW (: P8_NEW_PASSWORD);
So far, the system works very well if the user enters a value in the field ": P8_NEW_PASSWORD". I also want the page to validate user input in other areas which is as below:
A validation of type function returns the error with Expression1 asDECLARE text
After the creation of this validation, the system shows no errors, or it changes the password. Help, please.
l_username varchar2 (30);
l_password varchar2 (30);
l_old_password varchar2 (30);
BEGIN
l_username: =: APP_USER.
l_password: =: P8_NEW_PASSWORD;
l_old_password: =: P8_OLD_PASSWORD;
If: P8_NEW_PASSWORD! =: P8_RETYPE_PASSWORD then
return "New and confirm password do not match! ';
elsif: P8_NEW_PASSWORD is null or: P8_RETYPE_PASSWORD is null then
return "New and confirm the password is not empty!";
elsif (l_username, l_old_password) APEX_UTIL.IS_LOGIN_PASSWORD_VALID = false then
return "old password is not valid!';
on the other
Returns a null value.
end if;
END;
Thank you
SaurabhSlim wrote:
I found what the problem was. I was pressing 'Enter' keyboard when the P8_RETYPE_PASSWORD field, which was the setting for 'Submit when you press enter' for YES and that is why, it would present the page without triggering the process page and validation, as they were related to the key 'P8_CHANGE '.Rohit Kapoor wrote: you can make it work also with the Enter"" key. Write a simple javascript function on the page header to identify the key 'enter' as:
The foregoing will send the page with the QUERY defined in apex.submit.
In the field 'Confirm password', call this function as (in the attributes of HTML form elements):
onKeyPress="checkEnter(event)"
Which is much more complicated that it should be. If the page is submitted using a text element with 'submit when you press enter', then REQUEST is set to the name of the element. Thus, to raise the validations and the process when either change the button is clicked or enter is pressed in the element P8_RETYPE_PASSWORD, changing conditions on validations and processes to condition the type of request is contained in the Expression 1, with 1 Expression:
P8_CHANGE,P8_RETYPE_PASSWORD
-
How to change the default database of the APEX
Hi all
I installed Apex on 10g express. BY using the object browser, I can browse only a local database as "XE".
But I have an another 2, 3 databases in different servers. I know how to connect using the database link and question.
But the question is when I want to write a query, I need to specify the database sid/instance always as below... which is so difficult, as I have write lengthy queries...
Select * from table_s@testdb t1, table_d@testdb t2;
Similarly, I have db sid anywhere in the query which is a little difficult.
If I do not mention this; then he said: table or view does not exist...
How can I overcome this problem...? It is the nature of the apex or can I change the default local database instance to whatever the PB I want to and question directly without passing the instance name?
And the other thing is that I can not access the tables through the wizard that are not local, given that those who are located in a different server... so I have to write the entire hand... query: S
I think you're my query clearly...
Can someone please give me a hand to solve this problem...
Thanks in advance,
MaxHello
Of course, it is more slow queries and use the remote tables.
To create the view
CREATE OR REPLACE VIEW vw_testdb_table_s AS select * from table_s@testdb
Then you select
SELECT * FROM vw_testdb_table_s
And you should be able to see this point of view in the object browser and use it in wizards.
Kind regards
Jari -
HOT backup database 10g express edition
Dear Sir
I use oracle database 10g express edition with 3.2.1 apex.
I'm planing to db.here hot backup entire database is 24 x 7 running... fashion archive
Info
pFile, control, password file
System datafile
SYSAUX datafile
Undo tablespace file
temporary tablespace file
redo log files
application data tablespace file
application index tablespace file
for backup of the entire database HOT including apex WORKSPACE... which tablespace or files are REQUIRED for backup?
Thank you
Engr.M.K ChowdhuryHello
To be convinced, you can do the following:
alter database begin backup;
Then, you check the backup status of your datafilles with the following query:
select file#, status from v$backup order by file#;
If the status is ACTIVE, this means that the data files are in backup mode, and you can copy them.
The redologs online, you can save them but this is not mandatory, because you have logs archived.
It is important to get all archived logs generated during (and after) the backup.
To do this, you can run the following right after the hot data files backup:
alter system archive log current;
It will generate a log archived that you need to include in your backup.
If you lose all your data (including the redologs online), after you restore the data files, you need to retrieve
the database. During this operation, you apply all archived logs and then you reset the redologs. It is a
incomplete recovery.However, for the online redo logs, it is important to multiplex to another disk. So, if you lose members on
a single disk, you can perform a full restore with their copy on the second disc.Hope this helps.
Best regards
Jean Valentine -
The APEX on OracleXE 3.2 upgrade error
Hello
I tried to install 3.2 on OracleXE APEX and met the following error.
SQL > @apexins.sql SYSAUX SYSAUX TEMP is
.....
....
.......
Trigger created.
The index is created.
The index is created.
check (in select_for_app ('Y', 'n')),
*
ERROR on line 40:
ORA-12952: demand exceeds the maximum allowed size of 4 GB database
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
D:\apex >
I used only 100 MB of my database to the apex.
I have restored my database and tried again... but the same error came.
Could someone help?
Kind regards
Allen.
Published by: allenalvares on March 5, 2009 03:21
Published by: allenalvares on March 5, 2009 03:35Interesting!
You may need to reduce the files/folders that make up the USERS tablespace.
Run this queryselect file_name,autoextensible,bytes/1024/1024 from dba_data_files where tablespace_name='USERS';
And then question
alter database datafile 'file-name-from-prev-query' resize 2000m;
CITY
-
I find it difficult to upgrade the apex 4-5. Can someone help me?
have installed the database 11g (Express Edition). And trying to upgrade to the apex 5, using slobaray.com, but I'm stacked along the way; Please can someone help me? Here is the script, and I have indicated where I stacked by selection, the problem:
c:\oraclexe\app\oracle\product\11.2.0 > cd c:\oraclexe\app\oracle\product\11.2.0\server\apex
c:\oraclexe\app\oracle\product\11.2.0\server\apex > sqlplus
SQL * more: Production of the version 11.2.0.2.0 on Sat Feb 13 20:52:57 2016
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Enter the user name: sys as sysdba
Enter the password:
Connected to:
Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production
SQL > select TABLESPACE_NAME from dba_tablespaces where nom_tablespace like '% APEX %';
no selected line
SQL * more: Production of the version 11.2.0.2.0 on Sat Feb 13 21:01:30 2016
Copyright (c) 1982, 2014, Oracle. All rights reserved.
Enter the user name: sys as sysdba
Enter the password:
Connected to:
Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production
SQL > home
Microsoft Windows [Version 10.0.10240]
(c) Microsoft Corporation, 2015. All rights reserved.
c:\oraclexe\app\oracle\product\11.2.0\server\apex > exit
SQL > show user
The USER is "SYS".
SQL > @apexins APEX is TEMP
Enter the value 4:
My confusion are:
(1) in the application of slobaexpet the
SQL > select TABLESPACE_NAME from dba_tablespaces where nom_tablespace like '% APEX %';
has given an answer to
TABLESPACE_NAME
------------
APEX
Mine is;
no selected line.
I don't know what was wrong with my work.
(2) SQL > @apexins APEX TEMP is
Enter the value 4:
I don't understand what the "enter the value of 4:" means and what to enter to continue on.
I suspended the process that I am waiting for the solution.
I'd appreciate someone's help.
Kind regards
GODIS-Tei
Hi Godis-Tei,
It is easy to explain.
(1) I don't know what are the instructions you follow, but it seems to suggest that you create a separate tablespace for APEX. Not a bad suggestion, but in your case, since you are new, you should be able to simply use the existing SYSAUX tablespace.
(2) you are prompted for an additional argument because you have not specified all necessary parameter values when calling apexins.sql. I suggest that you run again, and with the following arguments:
sysaux sysaux @apexins is temp
That's all! Good luck.
Joel
Maybe you are looking for
-
Replaced my black ink text and got a message error "is missing or defective print head. The print head seems to be missing, not detected, or incorrectly installed. "She will not have the menu on the printer, to come. I took the cartridge and reinsert
-
Xbox 360 questions (Modern Warefare 2) online
Hello, I request assistance with my Xbox 360 and Windows 7 online game, I would ask on Xbox.com, but they may not appear too willing to help. Anyway, I recently had the home edition of Windows Vista, and my online game has worked very well. I then
-
How can I get in Spider Solitaire bonus points? Thank you!
I have a high score of 1299, which requires some sort of bonus points. How they are won?
-
I have a mailbox that is overloaded with mail postmater. Who and what is this to cramming.
-
My product key stopped working
I had an authentic copy of installed Windows 7 (update of an authentic copy of Windows Vista), he had a lot of problems, so I reinstalled Vista. Vista installed successfully, but to attempt the upgrade to Windows 7, I said that my product key is not