11.1.2.2 - ODBC SQL Connect Error

Similar Questions

• SQL connection error

  Hello

  I have the following SQL error when you try to connect to a SQL Server on the same domain / Vlan. Anyone know if they have had a similar problem?

  1 Windows Firewall is disabled

  2 SQL server started

  3 Protocol TCP/IP

  4 database configured to accept remote connections

  5. the login account has permission to access

  a network related or instance specific error has occurred all in establishing a connection to sql server. The server has not been or is not accessible. Verify that the instance name is correct and that SQL server is configured to allow remote connections.  (provider: named pipes provider, error 0 - no connection could be made because the target machine actively refused it)

  

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• IaaS deployment sql connection error

  Hello

  While the IaaS deployment server, I get this error. could not connect to my SQL Server. Please review the snapshot and advise.

  Thanks in advance.

  The problem is resolved. The SQL Server instance name was incorrect. When named according to the instance of SQL Server, IaaS good server connected to SQL Server and created the database without any problems.

• [Oracle] [ODBC SQL Server driver] [libssclient22] General network error

  I use the oracle gateway (11.1) to sqlserver on Linux platform with the Oracle 10 g server.
  
  I'm getting following error when I run a select query:
  
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [Oracle] [ODBC SQL Server driver] [libssclient22] General network error. Check your network documentation. [Oracle] [ODBC SQL Server driver] [libssclient22] ConnectionOpen(connect()) (connect()). [Oracle] [ODBC SQL Server driver] Invalid connection string attribute
  ORA-02063: preceding 2 lines from SQLSERVER
  
  Another thing is, I've created an ODBC DSN named "sqlserver" as well. This configuration works well when the parameter "program" dg4odbc in Listener.ora. But with dg4msql, it gives an error.
  
  Here are the configuration files:
  
  -----------------
  initsqlserver.ora
  -----------------
  #
  # HS init parameters
  #
  HS_FDS_CONNECT_INFO = database_machine:1433 / / test_master
  HS_FDS_TRACE_LEVEL = OFF
  HS_FDS_RECOVERY_ACCOUNT = RECOVERY
  HS_FDS_RECOVERY_PWD = RECOVERY
  
  ------------
  Listener.ora
  ------------
  
  SID_LIST_sqlserver =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = sqlserver)
  (ORACLE_HOME = u01/app/oracle/product/11.1.0.6.0/gateway)
  (PROGRAM = dg4msql)
  )
  )
  
  SqlServer =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Server_Machine)(PORT = 1522))
  (ADDRESS = (PROTOCOL = CIP)(KEY = PNPKEY))
  )
  )
  
  
  ------------
  tnsnames.ora
  ------------
  
  SQLSERVER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Server_Machine)(PORT = 1522))
  (CONNECT_DATA =
  (SID = sqlserver)
  )
  (HS = OK)
  )

  Hello

  The error you are getting is because your HS_FDS_CONNECT_STRING is not correct:
  Don't forget you can ping the SQL SERVER name of the Oracle server command, or use the TCP/IP address
  Check the port, it is not necessary 1433.
  You can use the name of the instance instead of the port:
  HS_FDS_CONNECT_STRING = server_ip_address/instance_name/database_name

  Be careful, in the LISTENER. ORA, you must specify the gateway machine and not the SQL SERVER machine:
  SqlServer =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Gateway_Machine)(PORT = 1522))<====you must="" specify="" oracle="" gateway="">
  (ADDRESS = (PROTOCOL = CIP)(KEY = PNPKEY))
  )
  )

  Ditto for TNSNAMES. ORA:
  SQLSERVER =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = Gateway_Machine)(PORT = 1522))
  (CONNECT_DATA =
  (SID = sqlserver)
  )
  (HS = OK)
  )

  Concerning

  Mireille

• I have a SSIS package that uses ODBC to connect to a progress database that does not work in SQL Agent

  I have a SSIS package that uses ODBC to connect to a Progress database.  It works fine in Visual Studio and it works very well in a batch file calling DTEXEC from the Windows Task Scheduler, but it does not work in the work of the SQL Agent.  It says that it cannot find the driver information.

  Hi Curt_DBA,

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums (SQL Server Integration Services).

  MSDN Forum (SQL Server Integration Services)

  http://social.msdn.Microsoft.com/forums/en-SG/sqlintegrationservices/threads

  I hope this helps.

• Connection failed SQL State 08001 SQL Server Error 10061 SQL Native Client TCP provider no. could be made because the target machine actively refused it

  Wandering SQL Native Client Datasource - apparently, it's a pretty common problem and I see several resolutions to it.  This problem started for our long company until I started working here.  We do not allow remote connections.  JDE Enterprise Server and SQL server are on the same subnet.  Users are on a different subnet.  SQL Server gets this message tries to connect to the Server Enterprise JDE:

  Connection failed: State 08001 ' SQL': SQL Server Error 10061: Microsoft SQL Native Client TCP provider: no connection could be made because the target machine actively refused it.

  I tried several suggested solutions and do not get the case. Any help is appreciated. Thank you, Sophie

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the SQL Serversupport for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Win XP VM Player ODBC connection errors

  Hello VMware Forums,

  I am running Windows 7 on my machine of bare metal.  I installed VM Player and an XP VM to host my existing applications, such as our old school (HEAT) Helpdesk ticketing software.  It requires an ODBC DSN system on a server connection using the MS Access driver.  The virtual machine has been added to the field.

  I have install a ping running between my host and client and have not dropped a single package.  After about 5 minutes of running the application, I go to hell ODBC and get a steady flow of connection ODBC errors causing application crash and my session to hang.

  I checked the server logs and found that I authenticate me every 2 seconds until the server got sick of me and my application was refused.  Obviously when I go into the hell of the ODBC.

  Issues related to the:

  1. can I reconfigure the virtual NETWORK adapter to use the same subnet as my corporate network? This would make a difference, because I can communicate between client and server, host transparently?

  2. the installation of a 2nd NIC in my host would help the situation?

  3. any other suggestions? I can't do my job without this software... ;-(

  Thank you very much!

  -Jacob

  jtdubail wrote:

  I'm not sure I follow you.  I managed to corrupt the database application well.  Who made my day!

  Sorry, my fault. You said it's the always-connected host, not the comments.

  Is there a reason why an ODBC DSN connection does not smoothly in a virtual machine?  It seems that the connection is not stable enough to keep the Access database to panic...

  No, I don't know why it should not work in normal circumstances. I guess that needs deeper investigations. But what I've seen is (yet) that you use NAT to the customer. Which makes things maybe a little more complicated. When you use inbound NAT connections fail, as these needs to be rerouted to the guest. In addition the IP hosts will not appear on the network. All packets appear to come from the host, as it acts as a proxy for the guest.

  You will better use 'bridge' for the vNIC to the guest and you can then use the physical subnet IP address range.

  Do I you just that the prompt is one that tries to connect through ODBC to a database on the physical network server?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Microsoft SQL data source connection error

  I try to connect to a MS SQL database and continue to receive a connection refused error. the error is:
  
  Connection verification failed for data source: hbsdb
  java.sql.SQLException: [Macromedia] [SQLServer JDBC Driver] error socket creation. Connection refused: connect
  The root cause was that: java.sql.SQLException: error [Macromedia] [SQLServer JDBC Driver] socket creation. Connection refused: connect
  
  I'm new to MS SQL and do not know if I put it in place correctly. My settings for the DS are as follows:
  
  Server: localhost port 1433 (if I change (local) takes the time out)
  
  I have the DS, Database, login, password everywhere. The password and the name is for cold fusion to be able to execute queries and correct stuff? It is not a defined password to access the database? The database has been imported from a system to the top and is located at ServerName\Databases\DB_Name. I need to plug the DB to MS SQL Server somehow? I can
  display database tables, columns, but not connect. any help would be greatly appreciated.
  
  I am running Microsoft SQL Server 2005 180 assessment, Windows XP SP2, ColdFusion MX 7.1 Developers Edition.
  
  Thank you
  Drew
  

  Solved the problem, my username for any reason any was not the owner of the db, he switched to the top and it works fine... Thanks for the help guys.

• [Oracle] [ODBC SQL Server driver] String truncation on the right {01004} data

  When importing data from SQL Server 2005 to Oracle 11 g Release2 gateway, I get following error:
  
  insert into CSDescr select * from CSDescr@sqlserver
  *
  ERROR on line 1:
  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
  [Oracle] [ODBC SQL Server driver] string data, right truncation + {01004} +.
  ORA-02063: preceding 2 lines from SQLSERVER
  
  Oracle database characterset is AL32UTF8
  SQLServer database characterset is SQL_Latin1_General_CP1_CI_AS
  
  Here is the configuration file for the gateway settings:
  
  HS_KEEP_REMOTE_COLUMN_SIZE = LOCAL
  HS_NLS_LENGTH_SEMANTICS = CHAR
  
  I think that the definition of the parameter HS_LANGUAGE must correct the error, but I want to know what should be the value of this setting?

  HS_LANGUAGE must be set to a character set used by the foreign database

  Try: HS_LANGUAGE = american_america. WE8MSWIN1252
  Also specify HS_NLS_NCHAR = UCS2 nvarchars of SQl Server are stored in the UCS2 character set

• State SQL 28000 and SQL Server error 18452

  I have a SQL 2000 Server on a server with Windows Server 2003 computer.

  I have a laptop with Windows Vista, for which we are unable to connect to the database and it gives an error 24000 state SQL and SQL Server error 18452 with description as "failed to connect to the user (null). Reason: Not associated with approved connection SQL server.

  Please provide a solution to this problem.

  Thank you

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/
  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Loads of parallel data through SQL connect and replace existing data

  I'm doing a load of multiple data through SQL Connect using the following statement.  Just try to put in place a .bat file to automate the process but not sure that whenever it executes this statement adds data to existing or replaces the data? I tried to write an override for this but it works for instructions which contain the import section.

  Import of database data App.DB connect as username identified by password

  with the help of several rules_file, rul1, rul2, rul3

  load_buffer_block starting with buffer_id 10 on error write to 'C:\\dataload.err ';

  We can add spec commit buffer such as "replace all data ', 'create group', 'Add' to this import statement? The default declaration overrides the value whenever the data is loaded?

  Thanks in advance!

  you have an option in the rules file "Overwrite out of values."

  rulefile > setting dataload > loading values

• SQL developer error!

  I download sql developer and when I want to add a new connection and string in the blacnks I click on the test button I got the "THE NETWORK ADAPTER COULD NOT ESTABLISH THE CONNECTION" ERROR, what do I do?
  
  should I download 10g or 11g use sql developer?
  
  
  Thank you.

  user8944100 wrote:
  I download sql developer and when I want to add a new connection and string in the blacnks I click on the test button I got the "THE NETWORK ADAPTER COULD NOT ESTABLISH THE CONNECTION" ERROR, what do I do?

  You filled in the blanks - but what information did you use to do this?

  Whites must be filled with existing information about a database and a user. The information may point to Oracle 10 g, 10g, 11g, and others, but the database and the user must exist to complete the connection.

  As a (future) computer, ask yourself "how this connection information that you are testing are indeed correct and valid. It might be useful to have this discussion here...

• Database connect error

  Hi all
  
  I am usinf 10.2.0.1.0 Oracle.
  
  When I try to connect to the database as "CONNECT SYS/***@oradb as sysdba;"
  It connects very well.
  But when I connect with the diagram of the system I have my error as:
  ERROR:
  ORA-01033: ORACLE initialization or shutting
  
  But when I run because:
  
  SQL > connect sys/sysadm@proddw as sysdba;
  Connected.
  SQL > select status, database_status from v$ instance;
  
  STATUS DATABASE_STATUS
  ------------ -----------------
  ACTIVE RISE
  
  I get the status of ACTIVE database.
  
  that please?
  I am new to oracle.
  
  Thank you

  Hello

  Is the database in archivelog mode?

  run the command in sqlplus as sysdba below

  list of archive logs

  If you get the o/p as fashion archive

  At the sql prompt

  Try the commands below

  SQL > restore database

  SQL > alter database open;

  Let me know what you see?

  I suggest you read oracle DBA of doc, I think that I have answered the same scenario for you in another thread earlier...

  Concerning

• Update the Adobe Flash plugin always translates into a connection error

  Firefox quote plugin Adobe Flash as being outdated (has happened several times previously); the latest version of the plugin is downloaded (as done successfully many times before). This time, a connection error occurs. Repeat the process several times over several days gives the same results.

  More in detail, the smallest prior download EXE which is first downloaded from the Adobe site is able to be downloaded, but by operating it said something like "Download will begin shortly," with the download of the application itself never occurring, and a later message connection error.

  Although there seems to be a problem with Adobe, I suppose that other Firefox users would have also encountered this problem and he may know a solution.

  Better to use the full installer offline from here:
  https://www.Adobe.com/products/flashplayer/distribution3.html

• connection error install Adobe flash player

  When I try to update the adobe flash player, after installing it, I get error msg "connection error".
  Please help me by giving all possible solutions/options to solve this problem.

  Hi, please use the http://www.adobe.com/products/flashplayer/distribution3.html flash Offline Installer
  (for firefox, you need windows exe - install 'plugin according to the browsers')