11 GR 2 (10.2.0.3) RDBMS and G.I - installation question

Similar Questions

• Notice of email of the user (RDBMS) and default application

  Hello
  
  I have successfully configured notifications by e-mail for the workflow 11.1.2 planning I'm having a little challenge, instead of asking the end user at the entrance to their email in file-> Preferences-> planning, want it to load directley from the RDBMS and much that force all users to use the default settings of the application.
  
  Appreciate to let me know what is the name of the table and the steps to follow?
  
  Thank you

  This information is stored in the HSP_USER_PREFS table, although any changes made to the table may need planning must be restarted.
  You can also use LCM to export information to update and then import it.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Change the RDBMS and the server

  Hi Experts,
  
  My question is a bit strange;
  
  I migrated planning, Shared services, essbase, BI + and configured with 'A RDBMS' on ' server 002 "- it works fine." "
  
  I have three options:
  
  Option 1: I would use (migrated Planning, Shared services, essbase, BI +) with 'B of RDBMS' on server 003 - is desirable (as in 'B of RDBMS' old production RDBMS server 001)
  
  Option 2: I can move 'A RDBMS' server then - 003
  (a) reconfigure the DB server and app 'A RDBMS' with a new connection to the server. -It should work
  
  Option 3:
  (a) assumes that metadata Planning changed as I'm not sure. I can migrate 'A RDBMS' 003 server and reconfigure the Server DB and app with new details of server connection
  
  (b) later I can crush the single scheme of planning with the last metadata about server 003 (inside the RDBMS (A) and then simply update the database of planning.
  
  
  Please advice

  If you want to do a hyperion environment to a different database server while there is not a problem and you just point the configuration for the new information to the database,
  If you want to move a diagram to another environment hyperion then it would be an isssue you cannot simply copy the schema as hostnames etc of the hyperion environment are different and embedded in the patterns.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Best way to migrate (RDBMS and Essbase) planning data between systems

  Hello. I need to migrate data from planning (fact data relationship of Planning (time and text comments) and Essbase). Migration of Essbase is relatively simple (migration of Essbase dimension data and then export and reload fact Essbase data) but I'm not sure on the best way to migrate relational data 100% done. Should I do a dump of the schema and then migrating the other system of planning? Thank you.
  
  It comes to 11.1.1.3.

  Like you're on 11.1.1.3 I suggest to use LCM to migrate the planning elements.
  An example on how is available at:-http://www.oracle.com/technology/obe/hyp_ss/SS11.1.1_PLNLCM/PLN_LCM_OBE.htm

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Error in invoking target 'irman ioracle' of makefile ' / opt/oragrid/rdbms/lib/ins_rdbms.mk'

  Hi all

  I try to install Oracle12c IM on two virtual knots (in VMware Fusion) and get the following error message (both nodes are configured exactly the same):

  INFO: Starting the process generated output:

  INFO: ----------------------------------

  INFO:

  INFO:

  INFO:-bind the Recovery Manager (rman)

  INFO: rm f/opt/oragrid/rdbms/lib/rman

  INFO: / opt/oragrid/bin/orald o/opt/oragrid/rdbms/lib/rman-m64 - z noexecstack - Wl, - disable-new-dtags - L/opt/oragrid/rdbms/lib/-L/opt/oragrid/lib/-L/opt/oragrid/lib/talons//opt/oragrid/lib/s0main.o /opt/oragrid/rdbms/lib/sskrmed.o /opt/oragrid/rdbms/lib/skrmpt.o-ldbtools12-lclient12-lsql12-lpls12 - lrt-lplp12-lsnls12-lunls12-lnls12-lslax12-lpls12 - lrt-lplp12 /opt/oragrid/lib/libplc12.a - lclntsh - lclntshcore "/ opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnro12 cat ' cat '.

  INFO: /opt/oragrid/lib/ldflags'-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnnz12-lzt12-lztkg12-lztkg12-lclient12-lnnetd12-lvsn12-lcommon12-lgeneric12 - lmm-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12 "/ opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnro12 cat ' cat/opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lclient12-lnnetd12-lvsn12-lcommon12-lgeneric12 - lsn.

  INFOS : ls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12-lclient12-lnnetd12-lvsn12-lcommon12-lgeneric12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12 « cat /opt/oragrid/lib/sysliblist » -Wl,-rpath, / opt/oragrid/lib -lm « cat /opt/oragrid/lib/sysliblist » -ldl -lm -L/opt/oragrid/lib

  INFO: test! f - / opt/oragrid/bin/rman | \

  MV f/opt/oragrid/bin/rman/opt/oragrid/bin/rmanO

  INFO: mv/opt/oragrid/rdbms/lib/rman/opt/oragrid/bin/rman

  INFO: chmod 751/opt/oragrid/bin/rman

  INFO: chmod 755/opt/oragrid/bin

  INFO:

  INFO:-link Oracle

  INFO: rm f/opt/oragrid/rdbms/lib/oracle

  INFO: / opt/oragrid/bin/orald o/opt/oragrid/rdbms/lib/oracle-m64 - z noexecstack - Wl, - disable-new-dtags - L/opt/oragrid/rdbms/lib/-L/opt/oragrid/lib/-L/opt/oragrid/lib/heels / - Wl, - E /opt/oragrid/rdbms/lib/opimai.o /opt/oragrid/rdbms/lib/ssoraed.o /opt/oragrid/rdbms/lib/ttcsoi.o - Wl, - whole-archive - lperfsrv12 - Wl, - non-ensemble - archive /opt/oragrid/lib/nautab.o /opt/oragrid/lib/naeet.o /opt/oragrid/lib/naect.o /opt/oragrid/lib/naedhs.o /opt/oragrid/rdbms/lib/config.o - lserver12-lodm12 lcell12-lnnet12 - lskgx

  INFO: p12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12-lclient12-lvsn12-lcommon12-lgeneric12 - lknlopt ' if/usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep xsyeolap.o > / dev/null 2 > & 1; then echo '-loraolap12 '; '- lskjcx12-lslax12-lpls12 - lrt-lplp12-lserver12-lclient12-lvsn12-lcommon12-lgeneric12' fi if [f - opt/oragrid/lib/libavserver12.a]; then echo '-lavserver12 '; else echo '-lavstub12 '; fi' 'if [-f ".

  [INFO: opt/oragrid/lib/libavclient12.a]; then echo '-lavclient12 '; fi'-lknlopt-lslax12-lpls12 - lrt-lplp12-ljavavm12-lserver12 - lwwg "/ opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnro12 cat ' cat/opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnnzst12-lzt12-lztkg12 - lmm-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12-lztkg12 ' cat/opt/oragrid/lib/ldflags" - lncrypt12 "

  :-Lnsgr12-lnzjs12-ln12-lnl12-lnro12 INFO "/ opt/oragrid/lib/ldflags»-lncrypt12-lnsgr12-lnzjs12-ln12-lnl12-lnnzst12-lzt12-lztkg12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12 cat ' if/usr/bin/ar tv /opt/oragrid/rdbms/lib/libknlopt.a | grep 'kxmnsd.o' > / dev/null 2 > & 1; then echo ""; else echo '-lordsdo12 '; fi'L-/ opt/oragrid/ctx/lib / - lctxc12-lctx12-lzx12-lgx12-lctx12-lzx12-lgx12-lordimt12-lclsra12 - ldbc

  INFOS : fg12-lhasgen12-lskgxn2-lnnzst12-lzt12-lxml12-locr12-locrb12-locrutl12-lhasgen12-lskgxn2-lnnzst12-lzt12-lxml12-lgeneric12 - loraz - llzopro-lorabz2-lipp_z-lipp_bz2 - lippdcemerged - lippsemerged - lippdcmerged - lippsmerged - lippcore - lippcpemerged - lippcpmerged-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12-lunls12-lsnls12-lnls12-lcore12-lnls12-lsnls12-lunls12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lcore12-lsnls12-lnls12-lxml12-lcore12

  :-Lunls12-lsnls12-lnls12-lcore12-lnls12-lasmclnt12-lcommon12-lcore12 INFO - laio - lons ' cat/opt/oragrid/lib/sysliblist' - Wl,-rpath, / opt/oragrid/lib - lm ' cat/opt/oragrid/lib/sysliblist' - ldl - lm-l/opt/oragrid/lib

  INFO: /.

  INFO: usr

  INFO: /.

  INFO: bin

  INFO: /.

  INFO: ld

  INFO:.

  INFO:

  INFO: cannot

  INFO:

  INFO: find

  INFO:

  INFO: -.

  INFO: ljavavm12

  INFO:

  INFO: collect2:

  INFO: ld returned 1 exit status

  INFO:

  NEWS: make: * [/ opt/oragrid/rdbms/lib/oracle] error 1

  INFO: End of the generated process exit.

  INFO: ----------------------------------

  INFO: Exception thrown from action: do

  Exception name: MakefileException

  Exception string: error in the call to target 'irman ioracle' of makefile ' / opt/oragrid/rdbms/lib/ins_rdbms.mk'. See ' / opt/oraInventory/logs/installActions2013-11-25_04-25-06PM.log' for details.

  The exception severity: 1

  Here is my VM card:

  **************************************************************Installed RPM's*****************************************************************

  cat/etc/redhat-release

  Red Hat Enterprise Linux Server 6.4 release (Santiago)

  RPM - qa CCG

  4.4.7 - GCC - 3.el6.x86_64

  RPM - qa do

  Make - 3.81 - 20.el6.x86_64

  RPM - qa | grep oracle

  oracleasmlib - 2.0.4 - 1.el6.x86_64

  Oracle-logos - 60.0.14 - 1.0.1.el6.noarch

  Oracle-RDBMS-Server-12cR1-preinstall-1.0-8.EL6.x86_64

  kmod-oracleasm - 2.0.6.rh1 - 2.el6.x86_64

  oraclelinux-release-notes-6Server - 9.x86_64

  oraclelinux-release-6Server - 4.0.4.x86_64

  oracleasm-support - 2.1.8 - 1.el6.x86_64

  ***************************************************************JAVA***************************************************************************

  Java version "1.7.0_45".

  Java (TM) SE Runtime Environment (build 1.7.0_45 - b18)

  Java for 64-bit Server VM (build 24.45 - b08, mixed mode)

  *************************************************************SYSCTL**************************************************************************

  # Sysctl for Red Hat Linux kernel configuration file

  #

  # For the binary values, 0 is off, 1 is enabled.  See sysctl (8) and

  # sysctl.conf (5) for more details.

  # IP packets transfer controls

  NET. IPv4.ip_forward = 0

  # Control source route verification

  NET. IPv4.conf.default.rp_filter = 1

  # Do not accept source routing

  NET. IPv4.conf.default.accept_source_route = 0

  # The request feature of the kernel debugging system control

  kernel. SysRq = 0

  # Check if core dumps will add the PID for the base file name.

  # Useful to debug multithreaded applications.

  kernel.core_uses_pid = 1

  kernel.core_pattern=/var/adm/crash/cores/%e.SIG%s

  # Control the use of the TCP syncookies

  NET. IPv4.tcp_syncookies = 1

  # Disable netfilter on bridges.

  NET. Bridge.Bridge - nf-appeal-ip6tables = 0

  NET. Bridge.Bridge - nf-appeal-iptables = 0

  NET. Bridge.Bridge - nf-appeal-arptables = 0

  # Control default maxmimum of a message queue size

  kernel.msgmnb = 65536

  # Control the maximum size of a message, in bytes

  kernel.msgmax = 65536

  # Control the maximum shared segment size, in bytes

  # Control the maximum number of shared memory pages segments

  kernel.shmall = 4294967296

  # oracle - RDBMS - server - 12cR1 - preinstallation fs.file - max is 6815744

  FS.file - max = 6815744

  # oracle - RDBMS - server - 12cR1 - preinstall setting kernel.sem is 250 32000 100 128'

  kernel.SEM = 250 32000 100 128

  # oracle - RDBMS - server - 12cR1 - kernel.shmmni preinstallation is 4096

  kernel.shmmni = 4096

  # oracle - RDBMS - server - 12cR1 - kernel.shmall preinstallation is 1073741824 on x86_64

  # oracle - RDBMS - server - 12cR1 - kernel.shmmax preinstallation is 4398046511104 on x86_64

  kernel.shmmax = 4398046511104

  # oracle - RDBMS - server - 12cR1 - net.core.rmem_default preinstallation is 262144

  NET. Core.rmem_default = 262144

  # oracle - RDBMS - server - 12cR1 - net.core.rmem_max preinstallation is 4194304

  NET. Core.rmem_max = 4194304

  # oracle - RDBMS - server - 12cR1 - net.core.wmem_default preinstallation is 262144

  NET. Core.wmem_default = 262144

  # oracle - RDBMS - server - 12cR1 - net.core.wmem_max preinstallation is 1048576

  NET. Core.wmem_max = 1048576

  # oracle - RDBMS - server - 12cR1 - fs.aio preinstallation - max - nr is 1048576

  ISA AIO-max-nr = 1048576

  # oracle - RDBMS - server - 12cR1 - net.ipv4.ip_local_port_range preinstallation is 9000 65500

  NET. IPv4.ip_local_port_range = 9000 65500

  # Entries below have been added and to face a question r_filtering interconnections oracle wants private put in the open air

  NET. IPv4.conf.ETH4.rp_filter = 2

  NET. IPv4.conf.eth6.rp_filter = 2

  NET. IPv4.conf.eth1.rp_filter = 1

  *************************************************************Filesystem************************************************************************

  Size of filesystem used Avail use % mounted on

  / dev/map/vg_oracle12c-lv_root

  8.9 G 3.5 G 5.0 G 42%.

  tmpfs G 2.2 2.2 0 G 0% / dev/shm

  / dev/sda1 485M 101 M 359M 22% / Boot

  / dev/map/vg_oracle12c-lv_home

  2.0 G 70 M 1.9 G 4% / Home

  / dev/map/vg_oracle12c-lv_tmp

  4.5 G 541 M 3.7 G 13% / tmp

  / dev/map/vg_oracle12c-lv_var

  5,0 G 956 M 3.8 G 20% / var

  / dev/map/oracle_vg-oragrid

  20G 5.0 G 14G 27% / opt/oragrid

  . Host: / 466G 137 G 330 G 30% / mnt/hgfs

  *******************************************************************CPU INFO*******************************************************************************

  cat/proc/cpuinfo

  Processor: 0

  vendor_id: GenuineIntel

  CPU family: 6

  model: 70

  model name: Intel(r) Core i7-4850HQ CPU @ 2.30 GHz

  step by step: 1

  CPU MHz: 2294.967

  cache size: 6144 KB

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 13

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts ngif xtopology tsc_reliable nonstop_tsc aperfmperf DNI pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave f16c rdrand avx fma hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase RID

  BogoMips: 4589.93

  clflush size: 64

  cache_alignment: 64

  address sizes: 40 bits physical, 48 bits virtual

  power management:

  Processor: 1

  vendor_id: GenuineIntel

  CPU family: 6

  model: 70

  model name: Intel(r) Core i7-4850HQ CPU @ 2.30 GHz

  step by step: 1

  CPU MHz: 2294.967

  cache size: 6144 KB

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 13

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts ngif xtopology tsc_reliable nonstop_tsc aperfmperf DNI pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave f16c rdrand avx fma hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase RID

  BogoMips: 4589.93

  clflush size: 64

  cache_alignment: 64

  address sizes: 40 bits physical, 48 bits virtual

  power management:

  Processor: 2

  vendor_id: GenuineIntel

  CPU family: 6

  model: 70

  model name: Intel(r) Core i7-4850HQ CPU @ 2.30 GHz

  step by step: 1

  CPU MHz: 2294.967

  cache size: 6144 KB

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 13

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts ngif xtopology tsc_reliable nonstop_tsc aperfmperf DNI pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave f16c rdrand avx fma hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase RID

  BogoMips: 4589.93

  clflush size: 64

  cache_alignment: 64

  address sizes: 40 bits physical, 48 bits virtual

  power management:

  Processor: 3

  vendor_id: GenuineIntel

  CPU family: 6

  model: 70

  model name: Intel(r) Core i7-4850HQ CPU @ 2.30 GHz

  step by step: 1

  CPU MHz: 2294.967

  cache size: 6144 KB

  FPU: Yes

  fpu_exception: Yes

  CPUID level: 13

  WP: Yes

  flags: fpu vme pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts mmx fxsr sse sse2 ss syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts ngif xtopology tsc_reliable nonstop_tsc aperfmperf DNI pclmulqdq ssse3 cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave f16c rdrand avx fma hypervisor lahf_lm ida arat epb xsaveopt pln pts dts fsgsbase RID

  BogoMips: 4589.93

  clflush size: 64

  cache_alignment: 64

  address sizes: 40 bits physical, 48 bits virtual

  power management:

  *******************************************************************************Memory************************************************************************

  free m

  total used free shared buffers cached

  MEM: 4331 3972 359 0 30 3412

  -/ + buffers/cache: 530 3801

  Swap: 14323 0 14323

  ****************************************************************************Network***************************************************************************

  Note eth0 is NAT and used for internet connectivity, eth1 is the public network (static and accessible to the machine of hypervising fusion running) eth4 and eth6 are private and eth3 is connected to a storage openfiler device (this is also a virtual machine which serves ISCSI targets).

  
  

  eth0 Link encap HWaddr 00:50:56:22:C6:91

  INET addr:192.168.90.140 Bcast:192.168.90.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe22:c691 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 227 errors: 0:0 overruns: 0 frame: 0

  Dropped packets TX: 225 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 24414 (23.8 KiB) TX bytes: 18545 (18.1 KiB)

  eth1 Link encap HWaddr 00:50:56:3 A: AE:95

  INET addr:192.168.3.2 Bcast:192.168.3.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe3a:ae95 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 482561 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 450616 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 483728272 (461.3 MiB) TX bytes: 501489666 (478.2 MiB)

  eth3 Link encap HWaddr 00:50:56:24:40:AB

  INET addr:192.168.5.2 Bcast:192.168.5.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe24:40ab / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 4944 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 3817 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 6186232 (5.8 MiB) TX bytes: 346478 (338,3 KiB)

  ETH4 Link encap HWaddr 00:50:56:3F:77:AA

  INET addr:192.168.1.1 Bcast:192.168.1.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe3f:77aa / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 1222 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 978 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 205198 (200.3 KiB) TX bytes: 168464 (164.5 KiB)

  eth6 Link encap HWaddr 00:50:56:22:72:E3

  INET addr:192.168.1.3 Bcast:192.168.1.255 mask: 255.255.255.0

  ADR inet6: fe80::250:56ff:fe22:72e3 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 354 errors: 0:0 overruns: 0 frame: 0

  Dropped packets TX: 116 errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 54390 (53.1 KiB) TX bytes: 17992 (17.5 KiB)

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Dropped packets: 194338 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 194338 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 920534042 (877.8 MiB) TX bytes: 920534042 (877.8 MiB)

  *****************************************************************************ORACLE ASM AND MULTIPATH INFO********************************************

  /etc/init.d/oracleasm listdisks

  VOTE1

  OPPORTUNITIES.2

  VOTE3

  vote3 (14f504e46494c45523434517a65422d4b6364682d57544f65) dm-8 OPNFILER, VIRTUAL DISK

  size = 3. 0 g features = '0' hwhandler = '0' wp = rw

  ' - + - political = "round-robin 0" prio is 1 table = active ".

  ' - 3:0:0:2 sdh ready active 8:112 running

  vote2 (14f504e46494c45526e6c6a48324a2d6a4347462d7a465074) dm-6 OPNFILER, VIRTUAL DISK

  size = 3. 0 g features = '0' hwhandler = '0' wp = rw

  ' - + - political = "round-robin 0" prio is 1 table = active ".

  ' - 3:0:0:1 sdg ready active 8:96 running

  Vote1 (14f504e46494c45525763646753422d594262512d414a6275) dm-7 OPNFILER, VIRTUAL DISK

  size = 3. 0 g features = '0' hwhandler = '0' wp = rw

  ' - + - political = "round-robin 0" prio is 1 table = active ".

  ' - 3:0:0:0 homeless ready active 8:80 running

  *********************************************************************************************************************************************************************

  If more information is required please request and I will pay, as you can see that there are more than enough memory space and disk for the installation. The only exception being that I use a different "oraInventory', 'gridhome' and 'oraBase. I looked closely at the exit and the problem seems to be a file called "ljavavm12", I highlighted the line in bold above in the log output. Any help with this would be greatly appreciated.

  Kind regards

  Alex

  Solved my problem,

  to any other person with the same problem, here is how it was resolved:

  ljavavm12 belongs to libjavavm12.a, for some reason this file has not been copied in the $GRID_HOME, after having done so through fine.

  "cp /opt/oragrid/javavm/jdk/jdk7/lib/libjavavm12.a/opt/oragrid/lib / '.

  Alex,

• difference between compatible.rdbms in asm and compatible parameter database

  Hi gurus,

  Here, I have little doubt. What is the difference between compatible.rdbms and the compatible parameter database.

  We have a 2 node RAC on solaris. When I checked at the ASM instance level I found compatible.rdbms has the value 10.1.0.0.0 and compatible.asm 11.2.0.0.0 and compatible database is set to 11.2.0.0.0.

  Please guide me it will make a difference. Or I have to change the compatible.rdbms to a higher value.

  Thank you and best regards,

  Vincent Poorna Prasad.S

  When compatible.rdbms is set to 10.1.0.0.0, this means that the instance ASM (version 11.2.0.0.0) is compatible to support lower versions of instances of RDBMS from version oracle 10.1.0.0.0.

  If you don't want the ASM instance in support of the lower courts of RDBMS version, you can change the setting.

• 10205 RDBMS House with 10204 CRS

  Hi friends,
  
  We have an obligation to upgrade the CRS and RDBMS and ASM House 10204 to 10205 on my server linux 3 knots. To this end, I'm not trying to upgrade existing homes 10204 directly. Instead, I am trying to install a new version of base:
  
  (1) install 10201 base for ASM and RDBMS House (on the same server where the 10204 crs asm RDBMS is there)
  (2) improve the base ASM 10201 and RDBMS to 10205 using the patches 8202632 group
  (3) upgrade of CRS later during the weekend.
  
  My reason for this in this way is that I can save time during the window of real failure by upgrading just of CRS at that time. But when I get to the point of application of the Group of hotfixes 10205, in the Verification of the prerequisites section useful, I am getting following error:
  
  Oracle Clusterware Version check
  The current version of oracleclusterware is not 10.2.0.5. Recommendation: you must upgrade all nodes to the Oracle Clusterware at 10205... You must pass all the nodes in the Oracle Clusterware at 10205 before proceeding with this installation.
  
  What I've done is I've checked the verified user and proceeded to the installation and the upgrade to 10205. So my question would be:
  Is what I done correct?
  It I just stopped installation and first run CRS updated and then do this upgrade?
  It will cause problems more later as ASM or RDBMS home runs later when the CRS is actually upgraded to 10205?
  
  I was checking this note "Oracle Clusterware - ASM - version of database compatibility (Doc ID 337737.1() .
  'and 'version Oracle Grid Infrastructure/Clusterware (CRS) should be the latest version down to the 4th digit combination at any time. This means that you first put Grid Infrastructure/Clusterware. »
  
  I agree with that, but I will not use the 10205 aSM and RDBMS homes until after the CRS improved 10205 weekend. This weekend all the houses will undergo 10205 only. Its only now the time to install it separately as I need to know if its ok to do it like that or if the problems in the future...
  
  
  Thanks in advance.

  Hello

  the installation program checks the CRS 10.2.0.5... This is for safety, not that you forget first put the clusterware and simply use a newer version.
  The installation of the software itself doesn't change - it will install exactly the same thing, any CRS version you use.
  So in your case, it should be absolutely okay (just make sure that you are not using anything out of the House, 10.2.0.5 before moving the clusterware;).

  However I'm not Oracle support, so if you want to be 100% sure that I suggest you open a SR.

  Sebastian

• 2100 message not found; No product message file = RDBMS, installation = UL

  Hello
  
  I'm running sqlldr. But I got this message:
  
  2100 message not found; No product message file = RDBMS, installation = UL;
  
  I checked my ORACLE_HOME and its value is: C:\oraclexe\app\oracle\product\10.2.0\server which includes records BIN, RDBMS,...
  
  I checked my C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS and there is no ORAUS. MSG inside the folder. If this is the solution where I can find this file? I read in the forums in order to copy it into the directory of the server to the client, but I couldn't find anywhere on my machine.
  
  Thank you
  M

  You should look for ORAUS. MSB and not ORAUS. MSG: this file must be located in C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\mesg\oraus.msb

• ODI:i need to get a RDBMS data and put it in a file with EBCDIC enc

  I need to get data from an RDBMS and put it in a file with EBCDIC encoding using ODI
  I know how to get data and put it in the file using ODI, but do not know how to EBCDIC coding the file using ODI

  Hello

  Its very simple.

  You must specify the encoding code in the JDBC URL of the server in the topology Manager data file.

  For example,.

  JDBC:SNPs:DBFile? ENCODING =

  You can get your codes coding supported by ODI from here,

  http://download.Oracle.com/docs/CD/E17476_01/JavaSE/1.4.2/docs/guide/Intl/encoding.doc.html

  Thank you
  Guru

• The best way to move the physical servers in a data center

  Hello everyone.

  We have 3 physical database servers and you want to move to a data center.

  These servers are primary servers 2 with the infrastructure of grid and race of RDBMS oracle as stand-alone server + ASM and a standby with three instances server = an ASM + 2 instances of RDBMS for the primary servers corresponding instance.

  Each said server has 2 interfaces eth - one to be used with DG and another to deal with the demands of the customers.

  The standby server has three interfaces eth - two of them are used with DG ant the third to process requests from clients.

  So the question is what would be the best and most simple way to move all the data from these servers to the cetre of data taking into account the fact that there are three corresponding virtual server already exists whith the sama of RDBMS and Linux version.

  Hello again;

  I moved a little smaller primary and waiting that my slip was something like this:

  1. on the primary database see the standby destination.

  2. on the current expectation cancel recovery and closing of the database.

  3. create directories of database on the new server.

  4. edit the tnsnames.ora on the primary current

  5. Add the tnsnames.ora and listener.ora on the new server.

  6. move the password files and spfile on the new server.

  7 Tnsping both servers

  8 use scp to move the database to the new server.

  9 start the recovery, and check gap

  Create a scp of SQL

  set the position

  Set feedback off

  set pagesize 100

  set linesize 400

  Select 'scp'. B.SID |' server_name:' | B.SID as newname from v$ datafile;

  Select 'scp'. B.SID |' server_name:' | B.SID as newname from v$ controlfile;

  Select 'scp'. a.Member |' server_name:' | a.Member as newname v$ logfile;

  It is also worth a visit:

  http://Indico.CERN.ch/event/28821/contribution/3/attachments/537398/740808/DM-DataGuard.PDF

  Best regards

  mseberg

• Improvement of the database from 9i to 11.2.0.4

  Hi all

  I want to upgrade a database independent 9i to 11.2.0.4. Please suggest prerequisites and post the steps of the task to the high-gradation or share a link.

  Can I directly go from 9i to 11.2.0.4?

  Import/Export or Rman which will be better please suggest?

  
  

  Please let us know the steps in the import/export method?

  
  

  Thank you and best regards,

  
  

  Arya
  

  
  

  Arya,

  If you chose to export / import method, you might need to know what is the disadvantage and advantage. If you do the fragmentation of import/export segment will be deleted (it is good), that once we offer the downtime and run two tasks (1.upgrade 2) Fragmentation), but you will need to spend time to complete the upgrade of database.

  You may need to consider your database size and the total downtime you get?

  We will be able to parallelize export and import and finish faster. example, you can split the table export and import / diagram of first level (if you have a PK/FK relationship you need to retain the same).

  Here are the questions in my mind.

  (1) 9i database runs in Server A, you want to upgrade this database on the same server? If so have you checked OS and RDBMS software certification?

  (2) If you want to be updated on the same server by using export / import, then you have enough space to create the new database and to import?

  (3) If you perform import on 11 g that is created on the same server (SERVER A), then you have RAM / CPU to speed up the process?

  (4) you can consider database upgrade (on the same server) using the manual upgrade or DBUA, which has no more than space and your upgrade will of--> current in 9.2.0.8 to 11.2.0.4 version

  (5) manual / DBUA may take time depends on component installed in this database and the invalid invalid objects (if you have very less upgrade then total until 11.2.0.4 can take 2 hours max).

  If you think that you must upgrade the database to the new server, then you may need to review below.

  (a) how the data will be moved to the new server? is where your network speed is good?

  (b) will pass it data before the upgrade? OR after the upgrade to upgrade?

  (c) you can generate waiting for the current version--> that will move data before the end of the upgrade, if once graceful failover you can upgrade of database using DBUA / manual (described in point 5)

  (c) If you want to move the database after upgrade--> you can upgrade the database and build the day before for this in the new database on the new server (this may not be a good option)

  (d) If you want to move database during the upgrade--> you can export and import (this also takes time and your networks in question).

  In my opinion, export and import in a good option if you are very good to have the right amount of downtime and if you want to achieve upgrade and fragmentation at the same time.

  Post your question if you have

  Thank you

• How to connect to the database without sqlclient soa

  Hi all

  I have a very simple question.

  I need to write a shell script to get some stats for bpel instances of database as part of the daily health check.

  The problem is in our area of unix server, any customer database is not installed.

  Sql client is present as part of the installation of SOA that we can use to create the connection to the database? or by any mode of access to the shell database.

  Thanks in advance,

  Bob

  Hi Bob, there.

  most of the components in the FMW stack including SOA infrastructure rely on pure JDBC to talk to RDBMS and as I know there is no client Oracle installed in slot the FMW home (after installing SOA Suite).

  One possibility would be to use the Oracle Instant Client and use its tools from your shell scripts. It's a bit unzip and run Setup.

  HTH,

  A.

• Questions HAIP

  Hello

  I have a little questions about the le parameters option HAIP redundant Interconnection offered since version 11.2.0.2 and later on the GI.

  Reading some MOS Note () NOTE: 1210883.1 - Grid Infrastructure redundant Interconnect and ora.cluster_interconnect.haip) said it is recommended to use this option instead of using options as limited to the operating system level.

  (( However, the highly available IP (note) HAIP) FAQ for version 11.2 () Doc ID 1664291.1) say:

  HAIP, allowing redundant clusters of interconnection network adapters on the cluster nodes without requiring any OS level liaison, grouping or grouping of network cards.

  HAIP provides a layer of transparency between several (NIC) Network Interface cards on a given node, which are used for the cluster_interconnect that is used by RDBMS and ASM instances.

  However it is not used for the pulsation of the Clusterware network.

  What it means that the heart rate won't don't not in high availability?

  And are not do not the ability to perform failover on another network card.

  MI version is 12 c (12.1.0.2)

  Can he say that?

  Thank you very much

  Arturo

  Hello

  You can check with your hardware vendor (server) if it takes support LACP & LAG.  You will need to configure LACP wich switch LACP support.

  Some OS have it native... (for example, Solaris, AIX etc..)  x86_64 platform have a software player to configure (such as Dell, HP, etc.).

  If you have feature LACP in your approx... You must use HAIP.

• Home ASM binary files are deleted on a two node rac 10205

  Hello

  Binary ASM home have been removed during the withdrawal of 2nd node that is not a fully functional node.

  We have DR database running on node 1 which is declining due to lack of binary asm and upward.

  Any way to reinstall the binary files for the HOME of ASM and put the database online?

  Appreciate your help in advance.

  Thank you

  REDA

  You don't need to install anything. In your statement, the same binary files have been used for RDBMS and ASM instances. So you can start your ASM from your RDBMS instances, no problem. You'll need to build a pfile of course, wth INSTANCE_TYPE = ASM and an appropriate framework for AMS_DISKSTRING and ASM_DISKGROUPS.

  --

  John Watson

  Oracle Certified Master s/n

• Will there be a 11.2.0.5 group of patches?

  Platform: Linux 6. XX

  No idea if oracle will come out a 11.2.0.5 group of patches for the RDBMS and GI?

  See below.

  https://blogs.Oracle.com/upgrade/entry/premier_support_for_oracle_11

  also echoed here:

  Date of publication of Oracle 11.2.0.5 database

  11.2.0.4 is in a support extended Q1 2016 and is the current version of senior year to 11.2.