To access the files from the computers on the same network.

We recently bought two Macs and an airport Time Capsule as we were told that it would allow us to access the files from one computer to another. Run us a business out of our home and require both Mac to be able to access the files from each other or have at least a common location to save etc. Both Mac is put back up automatically and lift you under the "Shared" section of the Finder. The airport shows also here as well. I don't understand how to get this to work so that I can share files easily. Any help would be appreciated.

Open the system preferences sharing pane, start sharing files if necessary, and then use the connection to the server command in the Finder menu go.

(142670)

Tags: Wireless

Similar Questions

ACCESS the same table in another file gives message as there is no...

I'm working on a little game of shooting like a project to learn as3.
I struggled a lot with the as3 syntax, but am willing to grit your teeth and hope that someday that light...
the problem:
I created three clips in a fla.
I plugged 4 .as files to the fla:
Bomber.As
Bullet.As
Kanon.As
Shooter.As (connected to the phase of files / himself).
All the behaviors of the mc are described in packages in their own connected .as file.
I want to do a hitTestObject with "chips" and "bomber".

as file f the ball inside, I make a table to store the bullets.

When I want to access the same table in another .as file, I get a message there is no...

Can anyone suggest a solution...?
any help is very appreciated!

If the bullet.as file is supposed to be for a ball, and you intend to have more than one ball in action at any given time, so you probably don't want this table in the class bullet.as in any case. If the shooter file is the actual game file, then I have the file of shooting game in charge of the creation of new instances of the ball, and that is where I keep track of them in a table and their test against the bombers.

I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

Hi, I recently "lost" my MacBook Pro because of water damage. Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device. I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '. I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt'). The Web browsing is extremely slow (took about an hour to break down / find the file on the network). However, I tried to copy the file and I get errors of the alias. Please advise me on what I am doing wrong.

Thank you

ggnpeter

PS My OS is 10.9.5

Visit Time Machine FAQ of Pondini helps with Time Machine.

When a folder is displayed under several users, what is a duplicate or just two ways to access the same folder?

I used to go to Windows Explorer in the start button to find things and see how my computer data is based. After that I switched to Vista user accounts began to appear in the folder hierarchy. There are accounts of users 'Administrator', 'Office Adminitrator s', 'my name', 'guest' and 'default '. Under each of them except comments and by default, it seems to be duplicates of many of my files. These "duplicate" files are really the same files that are accessible only through these different users? Or is my computer overloaded with multiple copies of things. And if this is the case, how can ensure me that I am always access the right, since they have the same names and I need to check what 'user' with which it is associated to know which it is really?

Hello

1. What are the files or folders that you see in the user accounts?
2. were there any changes (hardware or software) to the computer before the show?

They are different ways to access the same files.

Users folder would show records of other users, subject to an authorization.

But the images by default and other folders that appear are the currently connected user.

Reply with answers to help you in a better way.

VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK

I tried to set up a simple customer vpn using this document

http://www.Cisco.com/en/us/products/sw/secursw/ps2308/products_configuration_example09186a00801e71c0.shtml

VPN IS CONNECTED BUT CANNOT ACCESS THE INTERNAL NETWORK BEHIND "RA"...

6.3 (5) PIX version

interface ethernet0 car

Auto interface ethernet1

ethernet0 nameif outside security0

nameif ethernet1 inside the security100

activate the encrypted password of VmHKIhnF4Gs5AWk3

VmHKIhnF4Gs5AWk3 encrypted passwd

hostname VOIPLABPIX

domain voicelab.com

fixup protocol dns-length maximum 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol they 389

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol 2000 skinny

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69

names of

access-list 101 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

access-list 101 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

access-list 102 permit ip 172.10.2.0 255.255.255.0 172.10.3.0 255.255.255.0

access-list 102 permit ip 172.10.1.0 255.255.255.0 172.10.3.0 255.255.255.0

pager lines 24

Outside 1500 MTU

Within 1500 MTU

IP address outside 208.x.x.11 255.255.255.0

IP address inside 172.10.2.2 255.255.255.0

alarm action IP verification of information

alarm action attack IP audit

IP local pool voicelabpool 172.10.3.100 - 172.10.3.254

history of PDM activate

ARP timeout 14400

NAT (inside) - 0 102 access list

Route outside 0.0.0.0 0.0.0.0 208.x.x.11 1

Route inside 172.10.1.0 255.255.255.0 172.10.2.1 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00

Timeout, uauth 0:05:00 absolute

GANYMEDE + Protocol Ganymede + AAA-server

AAA-server GANYMEDE + 3 max-failed-attempts

AAA-server GANYMEDE + deadtime 10

RADIUS Protocol RADIUS AAA server

AAA-server RADIUS 3 max-failed-attempts

AAA-RADIUS deadtime 10 Server

AAA-server local LOCAL Protocol

Enable http server

http 172.0.0.0 255.0.0.0 inside

http 0.0.0.0 0.0.0.0 inside

No snmp server location

No snmp Server contact

SNMP-Server Community public

No trap to activate snmp Server

enable floodguard

Permitted connection ipsec sysopt

Crypto ipsec transform-set esp-aes-256 trmset1, esp-sha-hmac

Crypto-map dynamic map2 10 set transform-set trmset1

map map1 10 ipsec-isakmp crypto dynamic map2

client authentication card crypto LOCAL map1

map1 outside crypto map interface

ISAKMP allows outside

ISAKMP identity address

part of pre authentication ISAKMP policy 10

ISAKMP policy 10 encryption aes-256

ISAKMP policy 10 sha hash

10 2 ISAKMP policy group

ISAKMP life duration strategy 10 86400

vpngroup address voicelabpool pool cuclab

vpngroup dns 204.x.x.10 Server cuclab

vpngroup cuclab by default-field voicelab.com

vpngroup split tunnel 101 cuclab

vpngroup idle 1800 cuclab-time

vpngroup password cuclab *.

Telnet timeout 5

SSH 208.x.x.11 255.255.255.255 outside

SSH 0.0.0.0 0.0.0.0 outdoors

SSH 172.10.1.2 255.255.255.255 inside

SSH timeout 60

Console timeout 0

username labadmin jNEF0yoDIDCsaoVQ encrypted password privilege 2

Terminal width 80

Cryptochecksum:b03a349e1ac9e6022432523bbb54504b

: end

Try to turn on NAT - T

PIX (config) #isakmp nat-traversal 20

http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution1

HTH

remote VPN and vpn site to site vpn remote users unable to access the local network

As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.

Hello

Looking at the configuration, there is an access list this nat exemption: -.

192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

But it is not applied in the States of nat.

Send the following command to the nat exemption to apply: -.

NAT (inside) 0 access-list sheep

Kind regards

Dinesh Moudgil

P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

Cisco ASA 5505 VPN L2TP cannot access the internal network

Hello

I'm trying to configure Cisco VPN L2TP to my office. After a successful login, I can't access the internal network.

Can you jhelp me to find the problem?

I have Cisco ASA:

within the network - 192.168.1.0

VPN - 192.168.168.0 network

I have the router to 192.168.1.2 and I cannot ping or access this router.

Here is my config:

ASA Version 8.4 (3)

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 192.168.1.1 255.255.255.0

!

interface Vlan2

nameif outside

security-level 0

IP 198.X.X.A 255.255.255.248

!

passive FTP mode

permit same-security-traffic intra-interface

the net-all purpose network

subnet 0.0.0.0 0.0.0.0

network vpn_local object

192.168.168.0 subnet 255.255.255.0

network inside_nw object

subnet 192.168.1.0 255.255.255.0

outside_access_in list extended access permit icmp any any echo response

outside_access_in list extended access deny ip any any newspaper

pager lines 24

Enable logging

asdm of logging of information

Within 1500 MTU

Outside 1500 MTU

IP local pool sales_addresses 192.168.168.1 - 192.168.168.254

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

NAT dynamic interface of net-all source (indoor, outdoor)

NAT (inside, outside) source inside_nw destination inside_nw static static vpn_local vpn_local

NAT (exterior, Interior) source vpn_local destination vpn_local static static inside_nw inside_nw-route search

!

network vpn_local object

dynamic NAT interface (outdoors, outdoor)

network inside_nw object

NAT dynamic interface (indoor, outdoor)

Access-group outside_access_in in interface outside

Route outside 0.0.0.0 0.0.0.0 198.X.X.B 1

Timeout xlate 03:00

Pat-xlate timeout 0:00:30

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

identity of the user by default-domain LOCAL

AAA authentication enable LOCAL console

the ssh LOCAL console AAA authentication

AAA authentication http LOCAL console

Enable http server

http 192.168.1.0 255.255.255.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

IKEv1 crypto ipsec transform-set my-transform-set-ikev1 esp-3des esp-sha-hmac

transport in transform-set my-transform-set-ikev1 ikev1 crypto ipsec mode

Crypto-map Dynamics dyno 10 set transform-set my-transformation-set-ikev1 ikev1

card crypto 20-isakmp ipsec vpn Dynamics dyno

vpn outside crypto map interface

Crypto isakmp nat-traversal 3600

Crypto ikev1 allow outside

IKEv1 crypto policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH 192.168.1.0 255.255.255.0 inside

SSH timeout 30

Console timeout 0

management-access inside

dhcpd address 192.168.1.5 - 192.168.1.132 inside

dhcpd dns 75.75.75.75 76.76.76.76 interface inside

dhcpd allow inside

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal sales_policy group policy

attributes of the strategy of group sales_policy

Server DNS 75.75.75.75 value 76.76.76.76

Protocol-tunnel-VPN l2tp ipsec

user name-

user name-

attributes global-tunnel-group DefaultRAGroup

address sales_addresses pool

Group Policy - by default-sales_policy

IPSec-attributes tunnel-group DefaultRAGroup

IKEv1 pre-shared-key *.

tunnel-group DefaultRAGroup ppp-attributes

ms-chap-v2 authentication

!

class-map inspection_default

match default-inspection-traffic

!

!

type of policy-card inspect dns preset_dns_map

parameters

maximum message length automatic of customer

message-length maximum 512

Policy-map global_policy

class inspection_default

inspect the preset_dns_map dns

inspect the ftp

inspect h323 h225

inspect the h323 ras

inspect the rsh

inspect the rtsp

inspect esmtp

inspect sqlnet

inspect the skinny

inspect sunrpc

inspect xdmcp

inspect the sip

inspect the netbios

inspect the tftp

Review the ip options

!

global service-policy global_policy

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:5d1fc9409c87ecdc1e06f06980de6c13

: end

Thanks for your help.

You must test with 'real' traffic on 192.168.1.2 and if you use ping, you must add icmp-inspection:

Policy-map global_policy

class inspection_default

inspect the icmp

--

Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
http://www.Kiva.org/invitedBy/karsteni

ASA 5505 IPSEC VPN connected but cannot access the local network

ASA: 8.2.5

ASDM: 6.4.5

LAN: 10.1.0.0/22

Pool VPN: 172.16.10.0/24

Hi, we purcahsed a new ASA 5505 and try to configure IPSEC VPN via ASDM; I simply run the wizards, installation vpnpool, split tunnelling, etc.

I can connect to the ASA using the cisco VPN client and internet works fine on the local PC, but it can not access the local network (can not impossible. ping remote desktop). I tried the same thing on our Production ASA(those have both Remote VPN and Site-to-site VPN working), the new profile, I created worked very well.

Here is my setup, wrong set up anything?

ASA Version 8.2 (5)

!

hostname asatest

domain XXX.com

activate 8Fw1QFqthX2n4uD3 encrypted password

g9NiG6oUPjkYrHNt encrypted passwd

names of

!

interface Ethernet0/0

switchport access vlan 2

!

interface Ethernet0/1

!

interface Ethernet0/2

!

interface Ethernet0/3

!

interface Ethernet0/4

!

interface Ethernet0/5

!

interface Ethernet0/6

!

interface Ethernet0/7

!

interface Vlan1

nameif inside

security-level 100

IP 10.1.1.253 255.255.252.0

!

interface Vlan2

nameif outside

security-level 0

address IP XXX.XXX.XXX.XXX 255.255.255.240

!

passive FTP mode

clock timezone PST - 8

clock summer-time recurring PDT

DNS server-group DefaultDNS

domain vff.com

vpntest_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.252.0

access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.252.0 172.16.10.0 255.255.255.0

pager lines 24

Enable logging

timestamp of the record

logging trap warnings

asdm of logging of information

logging - the id of the device hostname

host of logging inside the 10.1.1.230

Within 1500 MTU

Outside 1500 MTU

IP local pool 172.16.10.1 - 172.16.10.254 mask 255.255.255.0 vpnpool

no failover

ICMP unreachable rate-limit 1 burst-size 1

don't allow no asdm history

ARP timeout 14400

Global 1 interface (outside)

NAT (inside) 0-list of access inside_nat0_outbound

NAT (inside) 1 0.0.0.0 0.0.0.0

Route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX 1

Timeout xlate 03:00

Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

timeout tcp-proxy-reassembly 0:01:00

Floating conn timeout 0:00:00

dynamic-access-policy-registration DfltAccessPolicy

AAA-server protocol nt AD

AAA-server host 10.1.1.108 AD (inside)

NT-auth-domain controller 10.1.1.108

Enable http server

http 10.1.0.0 255.255.252.0 inside

No snmp server location

No snmp Server contact

Server enable SNMP traps snmp authentication linkup, linkdown cold start

Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

life crypto ipsec security association seconds 28800

Crypto ipsec kilobytes of life - safety 4608000 association

crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

outside_map interface card crypto outside

crypto ISAKMP allow outside

crypto ISAKMP policy 10

preshared authentication

3des encryption

sha hash

Group 2

life 86400

Telnet timeout 5

SSH 10.1.0.0 255.255.252.0 inside

SSH timeout 20

Console timeout 0

dhcpd outside auto_config

!

a basic threat threat detection

Statistics-list of access threat detection

no statistical threat detection tcp-interception

WebVPN

internal group vpntest strategy

Group vpntest policy attributes

value of 10.1.1.108 WINS server

Server DNS 10.1.1.108 value

Protocol-tunnel-VPN IPSec l2tp ipsec

disable the password-storage

disable the IP-comp

Re-xauth disable

disable the PFS

IPSec-udp disable

IPSec-udp-port 10000

Split-tunnel-policy tunnelspecified

value of Split-tunnel-network-list vpntest_splitTunnelAcl

value by default-domain XXX.com

disable the split-tunnel-all dns

Dungeon-client-config backup servers

the address value vpnpool pools

admin WeiepwREwT66BhE9 encrypted privilege 15 password username

username user5 encrypted password privilege 5 yIWniWfceAUz1sUb

the encrypted password privilege 3 umNHhJnO7McrLxNQ util_3 username

tunnel-group vpntest type remote access

tunnel-group vpntest General attributes

address vpnpool pool

authentication-server-group AD

authentication-server-group (inside) AD

Group Policy - by default-vpntest

band-Kingdom

vpntest group tunnel ipsec-attributes

pre-shared-key BEKey123456

NOCHECK Peer-id-validate

!

!

privilege level 3 mode exec cmd command perfmon

privilege level 3 mode exec cmd ping command

mode privileged exec command cmd level 3

logging of the privilege level 3 mode exec cmd commands

privilege level 3 exec command failover mode cmd

privilege level 3 mode exec command packet cmd - draw

privilege show import at the level 5 exec mode command

privilege level 5 see fashion exec running-config command

order of privilege show level 3 exec mode reload

privilege level 3 exec mode control fashion show

privilege see the level 3 exec firewall command mode

privilege see the level 3 exec mode command ASP.

processor mode privileged exec command to see the level 3

privilege command shell see the level 3 exec mode

privilege show level 3 exec command clock mode

privilege exec mode level 3 dns-hosts command show

privilege see the level 3 exec command access-list mode

logging of orders privilege see the level 3 exec mode

privilege, level 3 see the exec command mode vlan

privilege show level 3 exec command ip mode

privilege, level 3 see fashion exec command ipv6

privilege, level 3 see the exec command failover mode

privilege, level 3 see fashion exec command asdm

exec mode privilege see the level 3 command arp

command routing privilege see the level 3 exec mode

privilege, level 3 see fashion exec command ospf

privilege, level 3 see the exec command in aaa-server mode

AAA mode privileged exec command to see the level 3

privilege, level 3 see fashion exec command eigrp

privilege see the level 3 exec mode command crypto

privilege, level 3 see fashion exec command vpn-sessiondb

privilege level 3 exec mode command ssh show

privilege, level 3 see fashion exec command dhcpd

privilege, level 3 see the vpnclient command exec mode

privilege, level 3 see fashion exec command vpn

privilege level see the 3 blocks from exec mode command

privilege, level 3 see fashion exec command wccp

privilege see the level 3 exec command mode dynamic filters

privilege, level 3 see the exec command in webvpn mode

privilege control module see the level 3 exec mode

privilege, level 3 see fashion exec command uauth

privilege see the level 3 exec command compression mode

level 3 for the show privilege mode configure the command interface

level 3 for the show privilege mode set clock command

level 3 for the show privilege mode configure the access-list command

level 3 for the show privilege mode set up the registration of the order

level 3 for the show privilege mode configure ip command

level 3 for the show privilege mode configure command failover

level 5 mode see the privilege set up command asdm

level 3 for the show privilege mode configure arp command

level 3 for the show privilege mode configure the command routing

level 3 for the show privilege mode configure aaa-order server

level mode 3 privilege see the command configure aaa

level 3 for the show privilege mode configure command crypto

level 3 for the show privilege mode configure ssh command

level 3 for the show privilege mode configure command dhcpd

level 5 mode see the privilege set privilege to command

privilege level clear 3 mode exec command dns host

logging of the privilege clear level 3 exec mode commands

clear level 3 arp command mode privileged exec

AAA-server of privilege clear level 3 exec mode command

privilege clear level 3 exec mode command crypto

privilege clear level 3 exec command mode dynamic filters

level 3 for the privilege cmd mode configure command failover

clear level 3 privilege mode set the logging of command

privilege mode clear level 3 Configure arp command

clear level 3 privilege mode configure command crypto

clear level 3 privilege mode configure aaa-order server

context of prompt hostname

no remote anonymous reporting call

Cryptochecksum:447bbbc60fc01e9f83b32b1e0304c6b4

: end

Captures we can see packets going from the pool to the internal LAN, but we do not reply back packages.

The routing must be such that for 172.16.10.0/24 packages should reach the inside interface of the ASA.

On client machines or your internal LAN switch, you need to add route for 172.16.10.0/24 pointing to the inside interface of the ASA.

Cisco linksys router and cannot access the wireless network

We have cisco linksys wireless router. When we installed everything first, we could connect our wireless laptops to the network. Now, however, the network is detected, but there is no access to the internet. We have even a guy from ATT were out and he said that the wireless router has been installed backwards? He installed a dsl fast access on our laptop icon, and now we can access the wireless network but only if we connect as the first. We can also connect iPod to the wireless network. They detect the network, but when we enter the password cannot connect.

Hi JC_3094,

Welcome to the Microsoft Community and thanks for posting the question.

According to the description, it looks like you aren't able to access the Internet.

The likely causes of this problem is if the router is not configured properly.

Here are some steps that should help you to solve this problem.

Method 1:

Check if the router is configured properly to get access to the Internet.

Method 2:

Try the steps mentioned in this link and check:

This tutorial is designed to help you identify and solve problems with a wired (Ethernet) and wireless (Wi - Fi) network connections in Windows.

Wireless and wired network problems

http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

Method 3:

If there is a frequent disconnection try to update the firmware on the router and check.

In addition, visit these links for more information:

Why can't I connect to the Internet?

http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

Hope this information helps. Respond us if you have any questions with windows and we will be happy to help.

Easy VPN not able to access the local network

Hi guys,.

little hope can help me, I'll give you a run down on the config.

I have a border router that is a no. 2851 connected to the No. 2851 is a switch cisco 3750 running Routing inter - vlan with four VLANS.

I have easy VPN server on the edge router No. 2851 I am able to connect remotely from a client vpn cisco with a problem but I can't access the local network on the server, I tried everything with no luck.

I have a cisco VPN client installed on a 64-bit windows system 7 and I also tried with windows xp 32-bit system and still no luck.

Please I need help I need to get this race to end of trading today.

I will be copying and pasting the edge router config please if someone get review and see if the config is good.

You need to change your ACL PAT of standard to extend and to deny traffic to be translated to the Pool of VPN:

access-list 120 deny ip 10.10.10.0 0.0.0.3 10.10.50.0 0.0.0.255

access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

access-list 120 deny ip 172.16.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

access-list 120 deny ip 172.1X.20.0 0.0.0.255 10.10.50.0 0.0.0.255

access-list 120 deny ip 192.168.XX.0 0.0.0.255 10.10.50.0 0.0.0.255

access-list 120 allow ip 10.10.10.0 0.0.0.3 all

IP access-list 120 permit 192.168.XX.0 0.0.0.255 any

IP access-list 120 permit 172.16.XX.0 0.0.0.255 aniy

IP access-list 120 permit 172.1X.20.0 0.0.0.255 any

IP access-list 120 permit 192.168.XX.0 0.0.0.255 any

overload of IP nat inside source list 120 interface Dialer0

no nat ip within the source of the list 1 overload interface Dialer0

clear the ip nat trans *.

Hope that helps.

Cannot open 2 Virtual Machines at the same time to access the same database
People,

Hello.
I'm installing RAC Oracle Database 11 g 2 system with 2 Virtual Machines (rac1 and rac2) on top 3 VMPlayer.

The VM rac1 and rac2 when one of them is stopped.
Their locations are F:\VM_RAC\rac1 and F:\VM_RAC\rac2.

I opened rac1 rac2 is running. But this error message appears:

Error: "cannot open F:\VM_RAC\sharerac\asm1.vmdk drive or one instant records, that depends. Reason: cannot lock the file. »

While rac1 running, I opened rac2. But this error message appears:

Error: "cannot open F:\VM_RAC\sharerac\asm1.vmdk drive or one instant records, that depends. Reason: cannot lock the file. »

2 error messages are the same. This means that I can not open 2and rac1 rac2 VMs at the same time. When we run RAC system, must open 2 "machines" or machines to more than 2 at the same time, so that all machines can access the same database server.

My question is:

Can all folk tell me how have rac1 and rac2 run at the same time?

Thank you.
Unfortunately no, Oracle RAC requires that all nodes can visit the same set of shared disks. If your database resides within the DSO, each instance ASM (one per node) must also see the same set of disks to ASM diskgroup containing the data of the database files.

Best regards
Bryan Wood

Access the same catalog of XP and 7

Hello
I added a second drive on which I have win7 RC running. Before destroying the soemthing I would ask some advice:
Can I access the same catalog of XP and Win7?
If you work on XP, everything is on the C: drive so that when you work on Win7 XP disk and threrfore catalogue is on drive D:\ win7 point of view. Will this be a problem? LR stores data of absolute paths in the catalog that would prevent me from doing this?
Thanks for your suggestions.
Franz

McLion (+) wrote:

Since I have the catalog and images on the XP C:, they would be seen on both D: of Win7 forcing me to update the location of the folder whenever I work another OS (bothway).

I don't think that you still have to update the location of the folder, since the relative paths between the catalog and images will remain the same. I'm not sure, though - you should try.

I can't access the same website on my Macbook I can on my iPad. The Mac said the site could not be found, but I see only the IPad

I can't access the same website on my MacBook I can on my IPad. I get a cannot locate the site on the computer, but I can see it on the iPad. Both use Google as a home page and Safari as a browser.

A single site?

What site?

Maybe:

If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support

Which version of OSX? If it is 'Mac OS X (10.5.5),' as you say it is because the version of Safari is too old

Password to access the wireless network

I am trying to set up my iPhone to my home wireless network and I don't remember the password to access the wireless network and it drives me crazy! I'm going to network and sharing Center, then the properties of the wireless network. I click on the security is WPA-personal security type, is type of encryption: TKIP the box to show the network security key characters will not let me click on it. Anyone have an idea how I can access my own password?

Thanks a lot, a lot in advance! Lisa

Keep passwords secure - Microsoft on passwords strategy
http://support.Microsoft.com/kb/189126

Contact support on the router's Web site people. Or reset the default router and start over.

CANNOT ACCESS VISTA BY XP AND CANNOT ACCESS XP SINCE VISTA WITHIN THE SAME NETWORK MACHINE

I'm using vista Business. while I try to view other machines with the same working group in the same network... My machine only manifests itself in the network... No, other machines are available... and will have remote desktop also does not work if I have an address user name and password and IP address of the remote computer running xp... Help me.

Hi NIRAJ KARKI,.

You can't use Remote Desktop connection to connect to remote computers running Windows XP.

This package contains the Link Layer Topology Discovery () LLTD Responder. The network map on a computer running Windows Vista presents a graphical view of the computers and devices on your network and how they are connected using the LLTD protocol. The LLTD Responder must be installed on a computer that is running Windows XP before it can be detected and appear on the network map. After you install this item, you may have to restart your computer.

I suggest to install Layer Topology Discovery LLTD Responder (KB922120) (Link) and check if the problem is resolved.

Link Layer Topology Discovery (LLTD) responder (KB922120)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481e-BA11-37F485FA34EA&displaylang=en

You can check the link below.

Setting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

Please post back and let us know if it helped to solve your problem.

Kind regards
KarthiK TP

2605dn will not print from a computer, but another computer on the same network print very well.

The two machines running Win 7 64 bit, both on the same network (such as a printer) all with cable connection to the local network. A single machine prints fine, but since a few days, my PC will not be printed on the printer. PING and TRACERT it is correct, and I tried removing/reinstalling the printer several times. Using the PCL6 driver, as well as a specific driver for printer have same results. Anyone else having this problem?

After almost 12 hours of continuous hair-pulling, finally ran across the solution on a Microsoft forum site: it turns out that the problem was a recent update of anti-virus software (McAfee, specifically) who changed the firewall settings. Can't seem to get the AV software allow constantly to the printer, but temporarily disable the firewall in the AV software has solved the problem. (the other machine running another AV software package) I have to just be careful during this 15 minute period.

Anyway, if you have a similar problem, make sure to check the firewall settings.

To access the files from the computers on the same network.

Similar Questions

Maybe you are looking for