Similar Questions

• pouvez forms 11.1.1.2 installed oracle on redhat linux 5.5?

  Hello

  can someone tell me which forms 11.1.1.2 oracle installed on redhat linux 5.5?

  Thank you

  Here you will find all the information:

  http://www.Oracle.com/technetwork/middleware/downloads/FMW-11gr1certmatrix.xls

  Concerning

• error when installing database... under redhat linux 4.8

  Hello
  I try to install oracle 10g on redhat linux 4.8
  I get error at 62%

  Error in invoking target 'ntcontb.o' of makefile   

  so please can any body tell me what is the question to the oracle, I have downloaded from the Web site of oracle itself.
  

  product prerequisite
  
  
  Checking operating system requirements ...
  Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
  Actual Result: redhat-4
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking operating system package requirements ...
  Checking for make-3.79; found make-1:3.80-7.EL4. Passed
  Checking for binutils-2.14; found binutils-2.15.92.0.2-25. Passed
  Checking for gcc-3.2; found Not found. Failed <<<<
  Checking for libaio-0.3.96; found libaio-0.3.105-2. Passed
  Check complete. The overall result of this check is: Failed <<<<
  Problem: Some packages required for the Oracle Database 10g to
  function properly are missing (see above).
  Recommendation: Install the required packages before continuing with
  the installation.
  =======================================================================
  
  Checking kernel parameters
  Checking for semmsl=250; found semmsl=250.      Passed
  Checking for semmns=32000; found semmns=32000.  Passed
  Checking for semopm=100; found semopm=100.      Passed
  Checking for semmni=128; found semmni=128.      Passed
  Checking for shmmax=536870912; found shmmChecking operating system
  requirements ...
  Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
  Actual Result: redhat-4
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking operating system package requirements ...
  Checking for make-3.79; found make-1:3.80-7.EL4.        Passed
  Checking for binutils-2.14; found binutils-2.15.92.0.2-25.      Passed
  Checking for gcc-3.2; found Not found.  Failed <<<<
  Checking for libaio-0.3.96; found libaio-0.3.105-2.     Passed
  Check complete. The overall result of this check is: Failed <<<<
  Problem: Some packages required for the Oracle Database 10g to
  function properly are missing (see above).
  Recommendation: Install the required packages before continuing with
  the installation.
  =======================================================================
  
  Checking kernel parameters
  Checking for semmsl=250; found semmsl=250.      Passed
  Checking for semmns=32000; found semmns=32000.  Passed
  Checking for semopm=100; found semopm=100.      Passed
  Checking for semmni=128; found semmni=128.      Passed
  Checking for shmmax=536870912; found shmmax=536870912.  Passed
  Checking for shmmni=4096; found shmmni=4096.    Passed
  Checking for shmall=2097152; found shmall=2097152.      Passed
  Checking for file-max=65536; found file-max=202024.     Passed
  Checking for VERSION=2.6.9; found VERSION=2.6.9-89.ELsmp.       Passed
  Checking for ip_local_port_range=1024 - 65000; found
  ip_local_port_range=32768 - 61000.      Failed <<<<
  Checking for rmem_default=262144; found rmem_default=110592.    Failed <<<<
  Checking for rmem_max=262144; found rmem_max=131071.    Failed <<<<
  Checking for wmem_default=262144; found wmem_default=110592.    Failed <<<<
  Checking for wmem_max=262144; found wmem_max=131071.    Failed <<<<
  Check complete. The overall result of this check is: Failed <<<<
  Problem: The kernel parameters do not meet the minimum requirements (see above).
  Recommendation: Perform operating system specific instructions to
  update the kernel parameters.
  =======================================================================
  
  Checking Recommended glibc version
  Expected result: ATLEAST=2.3.2-95.27
  Actual Result: 2.3.4-2.43
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking physical memory requirements ...
  Expected result: 922MB
  Actual Result: 1988MB
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking available swap space requirements ...
  Expected result: 2982MB
  Actual Result: 1983MB
  Check complete. The overall result of this check is: Failed <<<<
  Problem: The system does not have the required swap space.
  Recommendation: Make more swap space available to perform the install.
  =======================================================================
  
  Checking Network Configuration requirements ...
  Check complete. The overall result of this check is: Not executed <<<<
  Recommendation: Oracle supports installations on systems with
  DHCP-assigned public IP addresses.  However, the primary network
  interface on the system should be configured with a static IP address
  in order for the Oracle Software to function properly.  See the
  Installation Guide for more details on installing the software on
  systems configured with DHCP.
  =======================================================================
  
  Validating ORACLE_BASE location (if set) ...
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking Oracle Home path for spaces...
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking for proper system clean-up....
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking for Oracle Home incompatibilities ....
  Actual Result: NEW_HOME
  Check complete. The overall result of this check is: Passed
  =======================================================================ax=536870912.    Passed
  Checking for shmmni=4096; found shmmni=4096.    Passed
  Checking for shmall=2097152; found shmall=2097152.      Passed
  Checking for file-max=65536; found file-max=202024.     Passed
  Checking for VERSION=2.6.9; found VERSION=2.6.9-89.ELsmp.       Passed
  Checking for ip_local_port_range=1024 - 65000; found
  ip_local_port_range=32768 - 61000.      Failed <<<<
  Checking for rmem_default=262144; found rmem_default=110592.    Failed <<<<
  Checking for rmem_max=262144; found rmem_max=131071.    Failed <<<<
  Checking for wmem_default=262144; found wmem_default=110592.    Failed <<<<
  Checking for wmem_max=262144; found wmem_max=131071.    Failed <<<<
  Check complete. The overall result of this check is: Failed <<<<
  Problem: The kernel parameters do not meet the minimum requirements (see above).
  Recommendation: Perform operating system specific instructions to
  update the kernel parameters.
  =======================================================================
  
  Checking Recommended glibc version
  Expected result: ATLEAST=2.3.2-95.27
  Actual Result: 2.3.4-2.43
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking physical memory requirements ...
  Expected result: 922MB
  Actual Result: 1988MB
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking available swap space requirements ...
  Expected result: 2982MB
  Actual Result: 1983MB
  Check complete. The overall result of this check is: Failed <<<<
  Problem: The system does not have the required swap space.
  Recommendation: Make more swap space available to perform the install.
  =======================================================================
  
  Checking Network Configuration requirements ...
  Check complete. The overall result of this check is: Not executed <<<<
  Recommendation: Oracle supports installations on systems with
  DHCP-assigned public IP addresses.  However, the primary network
  interface on the system should be configured with a static IP address
  in order for the Oracle Software to function properly.  See the
  Installation Guide for more details on installing the software on
  systems configured with DHCP.
  =======================================================================
  
  Validating ORACLE_BASE location (if set) ...
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking Oracle Home path for spaces...
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking for proper system clean-up....
  Check complete. The overall result of this check is: Passed
  =======================================================================
  
  Checking for Oracle Home incompatibilities ....
  Actual Result: NEW_HOME
  Check complete. The overall result of this check is: Passed

  Chetan-
  
  Published by: YANNICK CHETAN on October 6, 2010 15:27
  
  Published by: YANNICK CHETAN on October 6, 2010 15:28

  You need to install additional packages.
  You must configure the additional kernel parameters.
  And add more swap.

  For the list of required package control Installation guides
  http://www.Oracle.com/pls/db102/homepage
  or a very good install howto check MOS Docs
  Requirements for the installation of Oracle 10 g RDBMS on RHEL 4 x 86 platform [343431.1 ID] 2
  System requirements to install Oracle 10 g 2 RDBMS on RHEL 4 on AMD64/EM64T [339510.1 ID]

  Edited by: Kecskemethy on October 6, 2010 03:03

• is cpu hot add available on redhat linux 5, 32 bit os?

  is cpu hot add available on redhat linux 5, 32 bit os?

  the virtual machine is turned off and when I check in the settings, there is no field for connection to hot memory/cpu. and vm HW version 8.

  This is not supported according with VMware Compatibility Guide: VMware Compatibility Guide: search guest conductor /

• database Oracle 10 g express edition 64 bit for linux 64-bit oracle

  Can I find somewere where I downlod of oracle database 10g 64 bit for linux 64-bit oracle XE
  
  Please help me.
  
  I really need this database!
  
  Thank you
  
  Denio
  
  Published by: 968495 on 10/30/2012 10:17

  All the oracle 10g is under extended support, version 10g XE was torn off in the download pages at any time 10g has been extended.

  Will probably not be able to get a download of any place under oracle.com, but it could be a few sites still harboring. Try google.

• Installation of Oracle Database 11 g (11.1.0.6) on Redhat Linux (4.1.2 - 14) machine

  Hi all
  
  I've been struggling with the installation of Oracle 11 g (11.1.0.6) database on Redhat Linux (4.1.2 - 14) for the last 2 days. The area most struggle is to install required on a Linux RPM packages. I'm really running out of ideas to install by downloading the RPMs right on the internet.
  
  Somehow, I managed to installed most of them but could not download and install below good packets under Linux.
  
  Looking for the gcc - 4.1.1. Not been found.     Failure of < < < <
  Checking for libaio-devel - 0.3.106; Not been found.     Failure of < < < <
  Check libstdc+-devel - 4.1.1. Not been found.     Failure of < < < < +.
  Looking for elfutils-libelf-devel-0, 125; Not been found.     Failure of < < < <
  Check glibc-devel - 2.5 - i386. Not been found.     Failure of < < < <
  Check glibc-devel - 2.5 - x86_64; Not been found.     Failure of < < < <
  Verification of the gcc-c+-4.1.1; Not been found.     Failure of < < < < +.
  Verification of compat-libstdc+ -33 - 3.2.3 - x86_64; Not been found.     Failure of < < < < +.
  
  * the above information was collected on the wizard checked for system configuration requirements.
  
  And also, I got error in the log Wizard Setup below information.
  
  Checking available swap space requirements...
  Expected result: 7980 MB
  Actual result: 1983MB
  Full version. The result of this review is: failure of < < < <
  Problem: The system doesn't have the required swap space.
  Recommendation: Make more available swap space to perform the installation.
  
  But, my machine is the high range (hard disk 1 to and 8 GB of RAM) and here is the configuration.
  
  [+[root@dbserver2 ~] # df h +.
  Size of filesystem used Avail use % mounted on
  + / dev/map/VolGroup00-LogVol00 +.
  + 899 G 14G 839G 2% / +.
  + / dev/hda3 92M 12 M 75 M 14% boot +.
  tmpfs G 3.9 3.9 G 0 0% / dev/shm
  + [root@IN-GMS19 ~] #+.
  
  Can someone advise me where and how can I download the appropriate RPM packages and how do I swap space requirement as mentioned above resolution failure. Please let me know if other required information.
  
  Kind regards
  Kumar

  Salvation;

  Can someone advise me where and how can I download the appropriate RPM packages and how do I swap space requirement as mentioned above resolution failure. Please let me know if other required information.

  You can find all the RPM related to your DVD. See thread for the RPM below:

  Confirmation of RPM
  Re: Install package for oracle11gr2

  For swap:
  Swap size increase-linux
  How to increase the size of swap?

  Respect of
  HELIOS

• Do black screen when opening PDFs compounf under Redhat Linux 64-bit &amp; adobe reader 9.5.1

  Hi all

  I can't open the PDF files in adobe reader 9.5.1 under Redhat Linux 64 bit. all I get is a black screen. Does anyone have a solution for this?

  Kind regards

  Gary.

  Hi all

  I found the solution to display a composed PDF-Redhat Linux PDF portfolios.

  Use the (Evince - Document Viweer) native PDF Viewer. In the left panel, where it shows generally "miniature" - select "Accessories" in the dropdown menu drop-down. This will show you all the embeded PDF files. Just double click to view.

  Kind regards

  Gary.

• Installation of Oracle 11 g R2 on Redhat LInux Server ASM

  Hello
  
  Can any body me documents or the steps for installing Oracle 11 g 2 on Redhat Linux with ASM.
  
  
  Thank you
  Veera

  Hello

  Can any body me documents or the steps for installing Oracle 11 g 2 on Redhat Linux with ASM.

  See the technical notes MOS:
  * ASM 11.2 Configuration KIT (ASM 11 GR 2 Installation & Configuration, uninstall, upgrade, separation of the roles of employment ASM. [ID 1092213.1] *.
  * Server Oracle on Unix AIX, HP - UX, Linux, Mac OS X, Solaris, Tru64 Unix operating systems Installation and Configuration requirements checklist (8.0.5 to 11.2) [ID 169706.1] *.

  Links:
  http://www.Oracle.com/pls/db112/portal.portal_db?selected=11&frame=#linux_installation_guides
  http://download.Oracle.com/docs/CD/E11882_01/server.112/e16102/TOC.htm
  http://www.Oracle-wiki.NET/startdocshowtoinstalloracle11glinuxasm
  http://www.Oracle-base.com/articles/11g/OracleDB11gR2InstallationOnEnterpriseLinux5.php

  Thank you
  A H E E R X

• install Oracle on RedHat Linux AS4 iAS

  Hi all
  
  We need to install Oracle iAS 10.1.2.0.2 on RedHat Linux AS4
  but some packages are required to complete the installation as
  
  
  * 2.3.4 glibc - 2.9
  * glibc-common - 2.3.4 - 2: 9
  * binutils - 2.15.92.0.2 - 13
  * compat-libstdc ++ - 296 - 2, 96 - 132.7.2
  * gcc - 3.4.3 - 22.1
  * gcc - c++ - 3.4.3 - 22.1
  * libstdc ++ - 3.4.3 - 22.1
  * libstdc ++ - devel - 3.4.3 - 22.1
  * openmotif21 - 2.1.30 - 11.RHEL4.4
  * pdksh - 5.2.14 - 30
  * setarch-1, 6-1
  * make-3, 80-5
  * gnome-libs - 1.4.1.2.90 - 44.1
  * sysstat - 5.0.5 - 1
  * compat - 4.1.25 - DB9
  * control center - 2.8.0 - 12
  * xscreensaver - 4.18 - 5.rhel4.2
  ===================================
  the system already have these packages, but some of them is the low version
  
  as
  2.3.4 glibc - 2.9 > > > > > we only glibc - 2.3.4 - 2
  
  ==============
  
  I tried RPM sites to find the most recent version but without any power
  
  
  
  Please advice if I install iAS on existing packaging, it will reflect on installation.performance or stability after that
  
  
  Thank you
  
  Mohamed

  and do you have you code the correct pieces of
  AutoStart the infradb
  and stuff like

  Su - oracleas c.
  # wait the coming infradb
  $ORACLE_HOME/opmn/bin/opmnctl startall > startlog 2 > & 1 &

  etc. etc. etc?

• Oracle EBS R12 on Linux 64-bit vs. 64-bit Windows 2003 OS

  Dear all,
  
  Oracle EBS R12 with DB 10 gr 2 64-bit
  
  on Linux 64-bit vs. 64-bit Windows 2003
  
  The data/book white/comments, those who can help to make a decision in what concerns performance on OS Linux 64-bit vs. 64-bit Windows 2003.
  
  Management wants to basically the following:
  •The advantages/disadvantages of 64-bit Linux
  •The advantages/disadvantages of 64-bit windows

  Please clarify for me, my understanding is good? or any other comments.

  You are right.

• The ORA-00200 control file could not be created in oracle under redhat linux

  with the creation of the database by using script under redhat linux I got following error. Anyone know not so please guide me.

  ORA-01501: CREATE DATABASE failed

  
  

  ORA-00200: control file could not be created

  
  

  ORA-00202: control file: ' / home/core/Databases/ControlFile/ctl2.dat'

  
  

  ORA-27040: create file error, cannot create the file

  
  

  Linux-x86_64 error: 2: no such file or directory

  Please check if the directories are present or not.

  CD/home/core/databases / ControlFile.

  If the directories are present, check for the permissions on the mountpoint.

  LS - ltr/home/core/Databases

  LS - ltr/home/core/Databases/ControlFile

  The permissions should be user and group name through which you create the controlfile.

  I hope that this information is sufficient. If the problem solved with this brand then kindly as correct answer later for others

• Problem with installation on Redhat Linux 6.5 OBIEE 11.1.1.7/11.1.1.6

  Hello

  I tried to install OBIEE 11.1.1.7 / 11.1.1.6 (tried both versions) Redhat linux 6.5. But the prior step fails with the message:

  Checking operating system certification:

  Expected result: a 6-oracle, oracle 5, 6, company - 5.4, company-4, company-5, redhat - 5.4, redhat-4, redhat-5, SuSE 10, SuSE 11

  Actual result: redhat-Red

  Verification: the result of this review is: failure of < < < <

  But WHEREAS, when we check the OBIEE compatibility matrix, cleary mentions the support of OBIEE 11 g with Redhat Linux 6 (level 1 + updated to date)

  When I tried to ignore this warning and proceed with the installation, during the configuration phase, Create Domain step breaks down and I'm not able to go further.

  Waiting for pointers to solve the problem.

  Thank you

  Saud

  Check this Doc ID 1438537.1

• database from 32 bit to 64 bit on Linux data / ORA-06553: PLS-801: internal error [56319]

  Hello

  I've migrated EBS from 32 bit to 64 bit Linux database. I followed this Metalink note.

  Note - 341880.1 how to convert a database from 32-bit to 64-bit on Linux database?

  After the move, I did the below steps and get the error below... How to solve this problem?

  ===================================================================================

  SQL > startup nomount

  ORACLE instance started.

  Total System Global Area 595591168 bytes

  Bytes of size 2098016 fixed

  415239328 variable size bytes

  163577856 of database buffers bytes

  Redo buffers 14675968 bytes

  SQL > @create_control - file.sql

  Created control file.

  SQL > alter database open resetlogs;

  Database altered.

  SQL > ALTER TABLESPACE TEMP add TEMPFILE ' / d01/prd1/prd1data/tmp1.dbf' SIZE 2000 M REUSE AUTOEXTEND OFF;

  Tablespace altered.

  SQL > @$ORACLE_HOME/olap/admin/olap.sql SYSAUX TEMP

  BEGIN

  *

  ERROR on line 1:

  ORA-06553: PLS-801: internal error [56319]

  DECLARE

  *

  ERROR on line 1:

  ORA-06553: PLS-801: internal error [56319]

  BEGIN

  *

  ERROR on line 1:

  ORA-06553: PLS-801: internal error [56319]

  ===================================================================================

  Thank you.

  Please see the solution in (ORA-06553: PLS-801: internal error [56319], ORA-06544: PL/SQL: internal error, arguments: [56319] [] [], [], [], [], [], [], ORA-00604 when using different bit datafiles that executable Oracle (Doc ID 1436552.1)).

  Thank you

  Hussein

• 10g database on linux 32-bit to 64-bit migration, linux on 11g

  Hi Hussein:
  
  Just wanted to get your opinion and any potential risk involved in performing the migration and upgrade in this way. I had to make sure that this process is working 100% without any problems. That's what I intend to do.
  
  Old 32-bit server Linux
  
  1 install 32 bit 11 g on the server
  2. switch to the 10 g Database 11 g database level
  3 stop the database
  
  New server: Linux 64-bit
  
  1 copy the init.ora, control files and data files to the new server.
  2. start the database in upgrade mode and run the utlirp.sql script
  3. Once done stop the database
  4. start the database in normal mode and run the utlrp.sql script.
  5. fill the clone.
  
  Best regards
  
  Bala

  Banan

  Please see (Note: 579234.1 - how to check if the Olap Option has been used recently) in order to check whether the OLAP is used or not. If not, then I think that you can Sketch this step - you can connect an SR to confirm this with the support of the Oracle.

  Kind regards
  Hussein

• RedHat Linux on Ts140

  Hello

  I would like to buy a server TS140. Can I run/install RedHat Linux on this server?

  Red Hat is not an operating system with support for the TS140... which means that Lenovo has no drivers, etc. for devices for Red Hat. It will probably run if you have the right drivers.