is cpu hot add available on redhat linux 5, 32 bit os?

the virtual machine is turned off and when I check in the settings, there is no field for connection to hot memory/cpu. and vm HW version 8.

This is not supported according with VMware Compatibility Guide: VMware Compatibility Guide: search guest conductor /

Tags: VMware

Similar Questions

If the CPU hot add/remove is not enabled

I heard that it is possible to change the number of CPUS and memory without CPU hot add/remove the active through CLI. Is it possible to change the CPU and memory count without turning off the virtual computer to activate the CPU and memory hot add? I work in a hospital and shut down a virtual computer is not possible to activate these functions.

Hi Eric,.

You can enable the feature add hot power-CLI, but you will need a restart in order to reload the new configuration.

Here you can get the detailed information in the present.

http://ICT-freak.nl/2009/10/05/PowerCLI-EnableDisable-the-VM-hot-add-features/

hope this helps you.

Thank you and best regards,

Shrikant Germain

/Memroy CPU hot add functionality in LINUX

Hello
I use for my virtualization vmware vsphere environment. I have enterprize license. I am able ti cpu/memory use hot add feature in edition ent windoiws 2003 and able to enable virtual machine settings. But same is not visible in linux virtual machine settings.
Can you please help me.

Hot add is picked up on some Linux distributions and only in 64-bit KB 1007275. SLES11 and Ubuntu are two I've read at work.

vExpert

VMware communities moderator

-KjB

UCS hot add/replace memory/CPU

Hello. I know on cisco UCS C460 we can expand the amount of memory using memory riser cards. Memory riser cards are hot-swappable. This means that when I run Win2008R2 Datacenter Server c460 I can hot add and replace the memory riser card memory?

Can I hot replace memory on the motherboard slots?

What UCS server models are supported CPU hot add/replace?

Dmitry,

Yes the risers of memory are hot-swappable, so assuming that the bare metal OS can support memory added to hot it will work.

There is no DIMM slots on the motherboard directly on the C460. Memory riser is only motherboard for memory interfaces.

There is no such a thing to my knowledge as an addition to hot CPU on all Cisco platforms.

See the Installation Guide HW for more information:

http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/HW/C460/install/replace.html#wp1160169

Kind regards

Robert

E of CPU RAM hot add con Ubuntu

Ciao, ho it following "problem": Add the Su macchine ubuntu (12 x 64) seems not the hot cpu delle funzionare e delle ram, nel senso che he operating system non vede nuove risorse not if production.
googlando ho trovato di couple UN link
http://adaptivethinking.WordPress.com/2009/07/27/vSphere-ESX4-hot-add-memory-for-Linux-guests/
http://communities.VMware.com/docs/doc-10493
Dove sono degli script che comes manualmente, Google way try it risultato sperato, my Reed is girano senza cold if fanno non nulla.
I had to link sound a po' datati, a dir la Verità (sia come sia hypervisor come s.o.).
Qualcuno ha affrontato con successo he problema? Come?
Nelle stessa terms (esxi 5.1, virtual hardware 9 e vmtools date) Centos 6 funziona come UN orologio per i tipi di both adding. In realtà gia mi pareva che Centos/HR TR sposi meglio con vmware, don't ho una as confirmation.

Ho dato a 'occhiata sull' HCL di vmware, the hot add della non supportata su Ubuntu 12.04 (anche altre release) e RAM... ricordavo invece che Spannplatte, AI tempi avevo ancora della 8.04 tested knew ESX 4. E changed qualcosa sex O male o ricordo (o forse avevo testato hotadd delle vCPU): Pei

The addition has vCPU supportata e invece di caldo, comunque ti will not?

Ciao

error when installing database... under redhat linux 4.8

Hello
I try to install oracle 10g on redhat linux 4.8
I get error at 62%

Error in invoking target 'ntcontb.o' of makefile

so please can any body tell me what is the question to the oracle, I have downloaded from the Web site of oracle itself.

product prerequisite


Checking operating system requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
Actual Result: redhat-4
Check complete. The overall result of this check is: Passed
=======================================================================

Checking operating system package requirements ...
Checking for make-3.79; found make-1:3.80-7.EL4. Passed
Checking for binutils-2.14; found binutils-2.15.92.0.2-25. Passed
Checking for gcc-3.2; found Not found. Failed <<<<
Checking for libaio-0.3.96; found libaio-0.3.105-2. Passed
Check complete. The overall result of this check is: Failed <<<<
Problem: Some packages required for the Oracle Database 10g to
function properly are missing (see above).
Recommendation: Install the required packages before continuing with
the installation.
=======================================================================

Checking kernel parameters
Checking for semmsl=250; found semmsl=250.      Passed
Checking for semmns=32000; found semmns=32000.  Passed
Checking for semopm=100; found semopm=100.      Passed
Checking for semmni=128; found semmni=128.      Passed
Checking for shmmax=536870912; found shmmChecking operating system
requirements ...
Expected result: One of redhat-3,redhat-4,SuSE-9,asianux-1,asianux-2
Actual Result: redhat-4
Check complete. The overall result of this check is: Passed
=======================================================================

Checking operating system package requirements ...
Checking for make-3.79; found make-1:3.80-7.EL4.        Passed
Checking for binutils-2.14; found binutils-2.15.92.0.2-25.      Passed
Checking for gcc-3.2; found Not found.  Failed <<<<
Checking for libaio-0.3.96; found libaio-0.3.105-2.     Passed
Check complete. The overall result of this check is: Failed <<<<
Problem: Some packages required for the Oracle Database 10g to
function properly are missing (see above).
Recommendation: Install the required packages before continuing with
the installation.
=======================================================================

Checking kernel parameters
Checking for semmsl=250; found semmsl=250.      Passed
Checking for semmns=32000; found semmns=32000.  Passed
Checking for semopm=100; found semopm=100.      Passed
Checking for semmni=128; found semmni=128.      Passed
Checking for shmmax=536870912; found shmmax=536870912.  Passed
Checking for shmmni=4096; found shmmni=4096.    Passed
Checking for shmall=2097152; found shmall=2097152.      Passed
Checking for file-max=65536; found file-max=202024.     Passed
Checking for VERSION=2.6.9; found VERSION=2.6.9-89.ELsmp.       Passed
Checking for ip_local_port_range=1024 - 65000; found
ip_local_port_range=32768 - 61000.      Failed <<<<
Checking for rmem_default=262144; found rmem_default=110592.    Failed <<<<
Checking for rmem_max=262144; found rmem_max=131071.    Failed <<<<
Checking for wmem_default=262144; found wmem_default=110592.    Failed <<<<
Checking for wmem_max=262144; found wmem_max=131071.    Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to
update the kernel parameters.
=======================================================================

Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.4-2.43
Check complete. The overall result of this check is: Passed
=======================================================================

Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 1988MB
Check complete. The overall result of this check is: Passed
=======================================================================

Checking available swap space requirements ...
Expected result: 2982MB
Actual Result: 1983MB
Check complete. The overall result of this check is: Failed <<<<
Problem: The system does not have the required swap space.
Recommendation: Make more swap space available to perform the install.
=======================================================================

Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with
DHCP-assigned public IP addresses.  However, the primary network
interface on the system should be configured with a static IP address
in order for the Oracle Software to function properly.  See the
Installation Guide for more details on installing the software on
systems configured with DHCP.
=======================================================================

Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================

Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================

Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================

Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
=======================================================================ax=536870912.    Passed
Checking for shmmni=4096; found shmmni=4096.    Passed
Checking for shmall=2097152; found shmall=2097152.      Passed
Checking for file-max=65536; found file-max=202024.     Passed
Checking for VERSION=2.6.9; found VERSION=2.6.9-89.ELsmp.       Passed
Checking for ip_local_port_range=1024 - 65000; found
ip_local_port_range=32768 - 61000.      Failed <<<<
Checking for rmem_default=262144; found rmem_default=110592.    Failed <<<<
Checking for rmem_max=262144; found rmem_max=131071.    Failed <<<<
Checking for wmem_default=262144; found wmem_default=110592.    Failed <<<<
Checking for wmem_max=262144; found wmem_max=131071.    Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to
update the kernel parameters.
=======================================================================

Checking Recommended glibc version
Expected result: ATLEAST=2.3.2-95.27
Actual Result: 2.3.4-2.43
Check complete. The overall result of this check is: Passed
=======================================================================

Checking physical memory requirements ...
Expected result: 922MB
Actual Result: 1988MB
Check complete. The overall result of this check is: Passed
=======================================================================

Checking available swap space requirements ...
Expected result: 2982MB
Actual Result: 1983MB
Check complete. The overall result of this check is: Failed <<<<
Problem: The system does not have the required swap space.
Recommendation: Make more swap space available to perform the install.
=======================================================================

Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with
DHCP-assigned public IP addresses.  However, the primary network
interface on the system should be configured with a static IP address
in order for the Oracle Software to function properly.  See the
Installation Guide for more details on installing the software on
systems configured with DHCP.
=======================================================================

Validating ORACLE_BASE location (if set) ...
Check complete. The overall result of this check is: Passed
=======================================================================

Checking Oracle Home path for spaces...
Check complete. The overall result of this check is: Passed
=======================================================================

Checking for proper system clean-up....
Check complete. The overall result of this check is: Passed
=======================================================================

Checking for Oracle Home incompatibilities ....
Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed

Chetan-

Published by: YANNICK CHETAN on October 6, 2010 15:27

Published by: YANNICK CHETAN on October 6, 2010 15:28

You need to install additional packages.
You must configure the additional kernel parameters.
And add more swap.

For the list of required package control Installation guides
http://www.Oracle.com/pls/db102/homepage
or a very good install howto check MOS Docs
Requirements for the installation of Oracle 10 g RDBMS on RHEL 4 x 86 platform [343431.1 ID] 2
System requirements to install Oracle 10 g 2 RDBMS on RHEL 4 on AMD64/EM64T [339510.1 ID]

Edited by: Kecskemethy on October 6, 2010 03:03

Hot add RAM through workflow

I'm working on a workflow to change the RAM/vCPU for a VM given, ideally using hot add, and it seems to be running into a problem with the memory part. My plan is to just get something working for now, and then add the logic to treat various conditions (hot don't add not activated/VM under tension, etc.).
So far, I have a relatively simple workflow (see below). The virtual machine in question has 2 GB of RAM and is turned on.
I looked also directly using the workflow change in RAM, but it gives me the same error. I use vSphere 5.5, vCO 5.5.2 - of ideas?
EDIT: I should mention that my test VM THAT hot add activated, it is supported by the OS, I have the license appropriate, and that VMware tools are up-to-date.

I found the problem... it turns out that Linux 64 bit guests with less than 3 GB of RAM can only warm - add up to a total maximum of 3072MB. If you're at 3071 MB, you can add only hot 1 MB. If you're 3073, you can add warm all the way up to 20 GB if you wish.

There is a KB for this: KB2008405.

Cannot hot add memory spent 32GB

VM 2012 data center, hardware version 8, cpu and memory hot add activated, 8 CPUs (kernel), 32 GB of RAM.
I can add processors, but cannot add memory in desktop client or web client. If there is a limit I'm missing it. Ideas?

Just a follow-up for everyone who was watching this.

I opened a case with VMWare and they were not helpful at all. They told me to delete and recreate the virtual machine.

I ended up having a maintenance window and was able to turn off the virtual machine and add memory. After starting up the option is back.

Hot Add Remove lun fails in rescan periodical at the time of the withdrawal, although the path is marked as DEAD as planned

So we run the hot add and remove cases from LUNs in the certification for ESX 5.5 with Workbench 3.0 kit

The hot add succeeds to the two manual add and periodic scan... Deletion succeeds manual extraction, but a failure in periodicals rescan same removal so it lists the path out of SERVICE.

Here are the logs

[August 26, 2014 20:01:29: WLMANAGER] [0] FRAME: no charges Found.

[August 26, 2014 20:02:25: HOTADDREMO] [0] INFO: hot test add using RESCAN

[August 26, 2014 20:07:55: HOTADDREMO] [0] INFO: performance of rescan the first server

[August 26, 2014 20:08:28: HOTADDREMO] [0] INFO: found new LUN eui. 48d8bf5f64e64100

[August 26, 2014 20:08:28: HOTADDREMO] [0] INFO: add hot with the new analysis is the first server

[August 26, 2014 20:08:28: HOTADDREMO] [0] INFO: Running rescan the second server

[August 26, 2014 20:09: HOTADDREMO] [0] INFO: found new LUN eui. 48d8bf5f64e64100

[August 26, 2014 20:09: HOTADDREMO] [0] INFO: add hot with rescan is the second server

[August 26, 2014 20:09: HOTADDREMO] [0] INFO: hot test add using PERIODICALLY RESCAN

[August 26, 2014 20:15:05: HOTADDREMO] [0] INFO: Test runs on the first server

[August 26, 2014 20:15:06: HOTADDREMO] [0] INFO: found new LUN eui.48d8bf5f64e64200

[August 26, 2014 20:15:06: HOTADDREMO] [0] INFO: add hot with the new analysis from time to time, is the first server

[August 26, 2014 20:15:06: HOTADDREMO] [0] INFO: Test runs on the secondary server

[August 26, 2014 20:15:08: HOTADDREMO] [0] INFO: found new LUN eui.48d8bf5f64e64200

[August 26, 2014 20:15:08: HOTADDREMO] [0] INFO: add hot with periodically rescan is the second server

[August 26, 2014 20:15:10: WLMANAGER] [0] FRAME: no charges Found.

[August 26, 2014 20:16:07: HOTADDREMO] [0] INFO: hot control remove using RESCAN

[August 26, 2014 20:17:27: HOTADDREMO] [0] INFO: hot execution removes the test on the first server

[August 26, 2014 20:18: HOTADDREMO] [0] INFO: LUNS deleted eui.48d8bf5f64e64200

[August 26, 2014 20:18: HOTADDREMO] [0] INFO: Test successfully on the first server

[August 26, 2014 20:18: HOTADDREMO] [0] INFO: hot execution removes the test on the second server

[August 26, 2014 20:18:33: HOTADDREMO] [0] INFO: LUNS deleted eui.48d8bf5f64e64200

[August 26, 2014 20:18:33: HOTADDREMO] [0] INFO: Test passed on the second server

[August 26, 2014 20:18:33: HOTADDREMO] [0] INFO: hot control remove by using PERIODICALLY RESCAN

[August 26, 2014 20:23:20: HOTADDREMO] [0] INFO: Test runs on the first server

[August 26, 2014 20:23:21: HOTADDREMO] [0] INFO: check the path to removed LUN on the first server

[August 26, 2014 20:24:17: TRANSPORT] [0] FRAMEWORK: running cmd 'esxcfg-mpath - bd eui.48d8bf5f64e64100' mode of blocking on the host 'esxia.amiads.com '...

[August 26, 2014 20:24:17: STAFBASE] [0] FRAMEWORK: command execution STAF: staf esxia.amiads.com PROCESS SAMECONSOLE RETURNSTDOUT RETURNSTDERR WORKDIR SHELL START / WAIT COMMAND esxcfg-mpath - bd eui.48d8bf5f64e64100

[August 26, 2014 20:24:18: STAFPROCES] [0] FRAME: host esxia.amiads.com returned eui. 48d8bf5f64e64100 : * iSCSI disk (eui.48d8bf5f64e64100)

vmhba34:C0:T65:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

vmhba34:C3:T65:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

[August 26, 2014 20:24:27: HOTADDREMO] [0] ERROR: LUN is found not deleted after periodic rescan on the first server

So I checked the Vmware perl code that performs this case... it is available at /opt/vmware/VTAF/storage50-cert/VTAF/Test/Storage/StorageCert/FVT/HotAddRemoveLUNs.pm

Sub RunHotRemoveTest

{

.....

# Remove LUN only cause death I/O path. It does not delete the LUN.

# Evaluate for the dead I/O path.

$deadPathFound = "NO";

LogInfo (channel = > $channel, MSG = > "Check the path to remove LUN on $server");

foreach my {$lun (@lunListBeforePeriodicallyRescan)

#my $lunObj = $host2HbaObj-> CreateScsiLun (name = > $lun);

$cmd = "esxcfg-mpath - bd $lun";

My $cmdObj = new VTAF::Framework:Core:Common:Command)

Home = > $host2Obj-> GetName();

Cmd = > $cmd);

my $rc = $cmdObj-> GetReturnCode();

my $cmdResult = $cmdObj-> GetStdout();

my $cmdError = $cmdObj-> GetStderr();

If ($cmdError) {}

$deadPathFound = "YES";

LogInfo (channel = > $channel, MSG = > "mpath command returned: $cmdError");

LogInfo (channel = > $channel, MSG = > "$lun is deleted after periodic rescan");

}

If ($deadPathFound not 'YES') {}

LogError (channel = > $channel, MSG = > "LUN is not deleted after periodic rescan on the $server");

return FAILURE;

} else {}

LogInfo (channel = > $channel, MSG = > ' delete hot with periodically rescan PASSED on the $server ");

}

So if you see the code above, Vmware itself expected the path to show the death, but they perceive three error codes for the output of esxcfg-mpath - bd < lunname >

I think they expect an error to return to $cmdError... But looks at though it lists the path as DEAD, she returns to success... So the $deadPathFound is always set to no. He goes into the path of "not YES" and not the test case...

I would like to open a folder from supported with VMware, but before that I would like to know if someone has faced this problem and had this problem of VMware using any patch in their Workbench... Or if any new workbench has this problem fixed...

We are using Vmware Test Manager: 3.0.0 - 1610638

5.5 storage certification: 3.0.0 - 1337995

VMware Workbench say 3.0.1

Than I went back to our older certification with ESX 5.1 where this matter has passed... and was able to check the logs. It has been performed with Workbench 2.0. In this they executed a more order "peripheral storage esxcli list d lunname" and lists the path as dead and also properly detects the dead path and scored the try with the... Unfortunately I don't seem to have their old code to compare with...

[July 27, 2012 12:34:06: SCSILUN] [0] FRAMEWORK: check if the 'eui.93bb4a37348e4100' lun is available or not.

[July 27, 2012 12:34:06: TRANSPORT] [0] FRAMEWORK: running cmd ' esxcli storage device base list d eui.93bb4a37348e4100 ' mode of blocking on the host 'esxia.amiads.com '...

[July 27, 2012 12:34:06: STAFBASE] [0] FRAMEWORK: command execution STAF: staf esxia.amiads.com PROCESS SAMECONSOLE RETURNSTDOUT RETURNSTDERR WORKDIR SHELL START / WAIT COMMAND esxcli storage base device list d eui.93bb4a37348e4100

[July 27, 2012 12:34:07: STAFPROCES] [0] FRAME: host esxia.amiads.com returned eui.93bb4a37348e4100

Full name: * iSCSI disk (eui.93bb4a37348e4100)

Definable display name: true

Size: 2048

Device type: Direct access

Multichannel plugin: NMP

Devfs Path: /vmfs/devices/disks/eui.93bb4a37348e4100

Seller: * I

Model: *.

Review: 2 0 s

SCSI level: 4

Is nickname: false

Status: dead

RDM Capable is: true

Is Local: false

Is removable: false

SSD is: false

Is Offline: false

Is perpetually booked: false

Thin Provisioning status: Yes

Attached filters:

VAAI status: unknown

Other UID: vml.01000000003933626234613337333438653431303053746f725472

[July 27, 2012 12:34:07: MULTITECH] SETTING [0]: called VTAF::TestLib:Sphere:Storage:Lib:CLI:ScsiLun:IsLunAvailable (Password='password@123' Username = 'root' HostName = 'esxia.amiads.com' LunName = 'eui.93bb4a37348e4100') returns '1'

[July 27, 2012 12:34:07: TRANSPORT] [0] FRAMEWORK: running cmd 'esxcfg-mpath - bd eui.93bb4a37348e4100' mode of blocking on the host 'esxia.amiads.com '...

[July 27, 2012 12:34:07: STAFBASE] [0] FRAMEWORK: command execution STAF: staf esxia.amiads.com PROCESS SAMECONSOLE RETURNSTDOUT RETURNSTDERR WORKDIR SHELL START / WAIT COMMAND esxcfg-mpath - bd eui.93bb4a37348e4100

[July 27, 2012 12:34:08: STAFPROCES] [0] FRAME: host esxia.amiads.com returned eui.93bb4a37348e4100: * iSCSI disk (eui.93bb4a37348e4100)

vmhba34:C1:T65:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

vmhba34:C0:T65:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

[July 27, 2012 12:34:08: HOTADDREMO] [0] INFO: eui.93bb4a37348e4100 died because of the LUN to remove test

So basically had the question warm Add Remove Lun. It is a problem in the ESX version we use and scripts of WorkBench. If we use the build ESX GA this would have worked. ESX changed the behavior of the command in version 5.5 of GA to a new approach and then back to the old approach again in 5.5 Update1.

The version we use are two versions higher than the release of GA... Therefore, the behavior of this command is different between these two versions.

ESXi 5.5 Patch 2	2014-07-01	1892794	N/A
ESXi 5.5 Patch Express 4	2014 06-11	1881737	N/A
ESXi 5.5 Update 1 has	2014-04-19	1746018	N/A
ESXi 5.5 Express Patch3	2014-04-19	1746974	N/A
ESXi 5.5 Update 1	2014 03-11	1623387	N/A
ESXi 5.5 Patch1	2013 12-22	1474528	N/A
ESXi 5.5 GA	2013-09-22	1331820	N/A

This is the behavior in version 5.5 GA ESX

~ # vmware - v

VMware ESXi 5.5.0 build-1331820

Added the target

~ # esxcfg - mpath - bd eui.3db57bdc252c0200

EUI.3db57bdc252c0200: FRIEND iSCSI disk (eui.3db57bdc252c0200)

vmhba34:C0:t0:l0 LUN:0 Status: active iscsi adapter: iqn.1998-01.com.vmware:5213e0fa-31de-329a-5885-002590135b9e-17c7a47e target: IQN = iqn.1991 - 10.com.ami:itx002590135d84e923:l.v10 Alias = Session = 00023 000002 PortalTag = 5 d

~ # echo $?

Removed from the target

~ # esxcfg - mpath - bd eui.3db57bdc252c0200

Device eui.3db57bdc252c0200 unknown

~ # echo $?

Now the version of ESX 5.5 Update 1, we use

Added the target

~ # vmware - v

VMware ESXi 5.5.0 build-1623387

~ # esxcfg - mpath - bd eui.5b5fbb54c4d80200

EUI.5b5fbb54c4d80200: FRIEND iSCSI disk (eui.5b5fbb54c4d80200)

vmhba38:C1:t0:l0 LUN:0 Status: active iscsi adapter: iqn.1998-01.com.vmware:5405e3db-f95e-9f9c-e99b-0025900cab82-01a17ffb target: IQN = iqn.1991 - 10.com.ami:itx00259014329a26b:l.sharontest Alias = Session = 00023 PortalTag = 9 000002 d

~ # echo $?

Removed from the target

~ # esxcfg - mpath - bd eui.5b5fbb54c4d80200

EUI.5b5fbb54c4d80200: FRIEND iSCSI disk (eui.5b5fbb54c4d80200)

vmhba38:C1:t0:l0 LUN:0 State: dead iscsi adapter: not available target: unavailable

~ # echo $?

Windows Server 2008 R2 and hot add processors

I am running Windows Server 2008 R2 (64-bit) OS invited under the latest version of vSphere 4 / ESXi and want hot add processors. When I go to change the settings for the virtual machine, the CPU area is grayed out, so I can't change the number of processors. What should I do to make this possible?
Thank you
-John

If virtual hardware version is 7 and the operating system you have configured for the virtual computer supported taken add/hot hot you can enable this feature in the settings of the virtual machine, while the virtual machine is turned off. It is located in the Options tab under 'Advanced'-> ' memory/CPU Hotplug. "

André

Hot add option missing from all virtual machines.

I'm under esx4.0, with all kinds of guest virtual machines (2003, 2008, 2008r2, std, ent, x 64). I don't have the option add hot for one of these clients. It is simply absent on options & gt; Advanced tab. What am I misssing here?
Thank you.

It will show only if it is an option for the operating system for some versions it won't be there. Also, what version of material are your virtual machines? Must be version 7 I think.

See this link for more information. http://www.Boche.net/blog/index.php/2009/05/10/vSphere-memory-hot-add-CPU-hot-plug

Hot add RAM Option not visible

I upgraded the VMs tools and equipment (v7), but do not see the option to add hot RAM.
The attached doc shows a Windows 2003 Server operating system with the options of the virtual machine.
I don't see the line that allows me to turn on the option.
I have to do something else to enable the option Add Hot for RAM?
Thank you

You must add pwer down virtual machine initially to turn hot.

On your second photo screen you can see hot add is disabled and you cannot change this setting only when the virtual machine is turned off.

1. turn off your virtual computer, then change the settings.

2. go to Options > advanced > memory/CPU hotplug

3 activate hot-memory add to this virtual machine.

4. turn on the virtual machine and the test.

Installation of Oracle Database 11 g (11.1.0.6) on Redhat Linux (4.1.2 - 14) machine
Hi all

I've been struggling with the installation of Oracle 11 g (11.1.0.6) database on Redhat Linux (4.1.2 - 14) for the last 2 days. The area most struggle is to install required on a Linux RPM packages. I'm really running out of ideas to install by downloading the RPMs right on the internet.

Somehow, I managed to installed most of them but could not download and install below good packets under Linux.

Looking for the gcc - 4.1.1. Not been found.     Failure of < < < <
Checking for libaio-devel - 0.3.106; Not been found.     Failure of < < < <
Check libstdc+-devel - 4.1.1. Not been found.     Failure of < < < < +.
Looking for elfutils-libelf-devel-0, 125; Not been found.     Failure of < < < <
Check glibc-devel - 2.5 - i386. Not been found.     Failure of < < < <
Check glibc-devel - 2.5 - x86_64; Not been found.     Failure of < < < <
Verification of the gcc-c+-4.1.1; Not been found.     Failure of < < < < +.
Verification of compat-libstdc+ -33 - 3.2.3 - x86_64; Not been found.     Failure of < < < < +.

* the above information was collected on the wizard checked for system configuration requirements.

And also, I got error in the log Wizard Setup below information.

Checking available swap space requirements...
Expected result: 7980 MB
Actual result: 1983MB
Full version. The result of this review is: failure of < < < <
Problem: The system doesn't have the required swap space.
Recommendation: Make more available swap space to perform the installation.

But, my machine is the high range (hard disk 1 to and 8 GB of RAM) and here is the configuration.

[+[root@dbserver2 ~] # df h +.
Size of filesystem used Avail use % mounted on
+ / dev/map/VolGroup00-LogVol00 +.
+ 899 G 14G 839G 2% / +.
+ / dev/hda3 92M 12 M 75 M 14% boot +.
tmpfs G 3.9 3.9 G 0 0% / dev/shm
+ [root@IN-GMS19 ~] #+.

Can someone advise me where and how can I download the appropriate RPM packages and how do I swap space requirement as mentioned above resolution failure. Please let me know if other required information.

Kind regards
Kumar
Salvation;

Can someone advise me where and how can I download the appropriate RPM packages and how do I swap space requirement as mentioned above resolution failure. Please let me know if other required information.

You can find all the RPM related to your DVD. See thread for the RPM below:

Confirmation of RPM
Re: Install package for oracle11gr2

For swap:
Swap size increase-linux
How to increase the size of swap?

Respect of
HELIOS

RedHat Linux on Ts140

Hello

I would like to buy a server TS140. Can I run/install RedHat Linux on this server?

Red Hat is not an operating system with support for the TS140... which means that Lenovo has no drivers, etc. for devices for Red Hat. It will probably run if you have the right drivers.

pouvez forms 11.1.1.2 installed oracle on redhat linux 5.5?

Hello
can someone tell me which forms 11.1.1.2 oracle installed on redhat linux 5.5?
Thank you

Here you will find all the information:

http://www.Oracle.com/technetwork/middleware/downloads/FMW-11gr1certmatrix.xls

Concerning

is cpu hot add available on redhat linux 5, 32 bit os?

Similar Questions

Maybe you are looking for