1140 series
What is the difference between 1141 and 1142. I read the data sheet at http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps10092/datasheet_c78-502793.html
But you see is not the specifics of these two APs.
Thank you.
The 1141 is the only 2.4 GHz g/n radio the 1142 is a/g/n dual radio.
He said with the reference numbers in the data sheetb
Tags: Cisco Wireless
Similar Questions
-
Radio error 1140 series access point
We have recently been deployed 1142N access points along the
our campus and have experienced some problems with stability of connectivity.
It seems that at random times Radio 0 will descend and connectivity to anyone to kill
Active access point. By issuing a command to 'see the dot11 association', not
get a result at as such research:150 5-516-AP > sh dot11 association
802.11 client Stations on Dot11Radio1:
SSID [Berklee student]:
Unknown - auto Drv_Add_In 0.0.0.0 0026.xxxx.xxxx
Unknown - auto Drv_Add_In 0.0.0.0 9027.xxxx.xxxx
Unknown - auto Drv_Add_In 0.0.0.0 9027.xxxx.xxxx
Unknown - auto Drv_Add_In 0.0.0.0 9027.xxxx.xxxxWhile in this State, making orders for d0/d1 int show gives you the following results:
Dot11Radio0 is reset, line protocol is down
The material is 802.11n 2.4 GHz Radio, the address is 1c17.d3ca.82f0 (bia 1c17.d3ca.82f0)
MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation 802. 1 q Virtual LAN, Vlan ID 1., loopback not set
Type of the ARP: ARPA, ARP Timeout 04:00
Last entry 1d16h, 00:00:00 exit, exit hang never
Final cleaning of "show interface" counters never
Input queue: 0/1677/81485/0 (size/max/drops/dumps); Total output drops: 72073802
Strategy of queues: fifo
Output queue: 0/30 (size/max)
5 minute input rate 0 bps, 0 packets/s
5 minute output rate 0 bps, 0 packets/s
119910815 package, 4144709374 bytes, 0 no buffer entry
Received 1084186 broadcasts, 0 Runts, 0 Giants 0 shifters
entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored
entry packets 0 with condition of dribble detected
165186574 packets output, 503099299 bytes, 0 underruns
19743 output errors, 0 collisions, 116 interface resets
unknown protocol 0 drops
0 babbles, collision end 0, 0 deferred
0 lost carrier, 0 no carrier
output buffer, the output buffers 0 permuted 0 failuresDot11Radio1 is up, line protocol is up
The material is 802.11n 5 GHz Radio, the address is 1c17.d37b.9a20 (bia 1c17.d37b.9a20)
MTU 1500 bytes, BW 54000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation 802. 1 q Virtual LAN, Vlan ID 1., loopback not set
Type of the ARP: ARPA, ARP Timeout 04:00
Last entry 1d04h, 00:00:00 exit, exit hang never
Final cleaning of "show interface" counters never
Input queue: 0/1677/10511/0 (size/max/drops/dumps); Total output drops: 75923217
Strategy of queues: fifo
Output queue: 0/30 (size/max)
5 minute input rate 4000 bps, 6 packets/sec
5 minute output rate 0 bps, 0 packets/s
200792332 package, 999483950 bytes, 0 no buffer entry
Received 722359 broadcasts, 0 Runts, 0 Giants 0 shifters
entry 0, 0 CRC errors, frame 0, saturation 0, 0 ignored
entry packets 0 with condition of dribble detected
293761017 packets output, 4202490277 bytes, 0 underruns
6043 output errors, 0 collisions, 3 interface resets
unknown protocol 0 drops
0 babbles, collision end 0, 0 deferred
0 lost carrier, 0 no carrier
output buffer, the output buffers 0 permuted 0 failuresThe only way out of this state the AP should perform a reload/restart.
Once again this problem seems to be random but I had to connect to all daily from the AP
basis to ensure that they are all in place and working properly which is a pain! We have about 40
running and about 60 percent of 1142 have experienced this problem at one time or another. So far, I
have not found any pattern or record information that can direct me to root causes
Thus, any idea that you can provide would be a great help!Hello
Please open a case with us (TAC), help you... There are a few bugs that is...
Concerning
Surendra
======
Please rate the posts that answered your question or was useful
-
Aironet 1140 access point / 1941 router question
I currently have:
-router (not wireless) 1941
-Access point 1140
Looks like I got the AP on controller instead of the standalone version. My question is, the 1941 (not 1941W) has a wireless controller? If not, is there a controller module I can add to my router? Or I would return the AP I to the standalone version (or the 1941 for the 1941W)?
Thanks in advance for any advice / help.
It is not a controller which can go in the 1941. The controllers are quite expensive if you probably don't want to go this way in any case. Before you send the return of accreditation, Sue TAC and see if you can convert it to a standalone. Some AP support this, but I'm not sure of the 1140 series.
It will be useful.
-
AIR-LAP1142N-E-K9 v03 not join WCS 5.2.130.0
The difficulty in reaching my new 1142 s ap to the controllers.
I have 2 controllers AIR-WLC4402-50-K9 with 50 licenses each and about 75 total s AP.
I never tried to join an AP before 1142. But join 1130 AP works very well. So my network settings should be OK.
I googled without finding the right info. I understand that the WCS 5.2 should support the 1142, or maybe I'm wrong?
Here is some info from the console of 1142:
*Aug 2 11:46:14.580: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:46:14.580: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:46:14.584: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:46:14.585: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:46:14.589: lwapp_image_proc: unable to open tar file
*Aug 2 11:46:14.590: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:46:24.594: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:46:24.594: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:46:24.601: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:46:08.578: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:46:14.577: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:46:14.578: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:46:14.578: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:46:14.582: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:46:14.582: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:46:14.587: lwapp_image_proc: unable to open tar file
*Aug 2 11:46:14.588: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:46:24.591: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:46:24.591: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:46:24.598: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.582: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.582: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.582: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.582: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.583: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.583: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.592: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.593: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
examining image...
*Aug 2 11:50:40.597: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.597: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
*Aug 2 11:50:40.604: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.581: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.581: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.581: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.581: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.585: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.586: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.590: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.591: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:40.595: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.595: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:50:40.602: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.586: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.585: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.585: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.585: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.590: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.590: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.594: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.595: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:40.599: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.599: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:50:40.606: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.577: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.576: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.577: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.577: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.581: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.581: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.585: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.586: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:40.590: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.590: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:50:40.598: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.582: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.581: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.581: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.581: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.585: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.586: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.590: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.591: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
examining image...
*Aug 2 11:50:40.595: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.595: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
*Aug 2 11:50:40.602: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.582: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.581: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.582: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.582: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.586: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.586: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.590: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.592: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:40.595: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.595: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:50:40.602: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.581: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.581: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.581: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.581: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.585: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.586: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.590: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.591: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:40.595: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.595: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:50:40.602: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.580: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.580: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.580: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.580: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.584: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.585: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.589: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.590: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:40.594: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.594: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:50:40.601: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.582: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.581: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.582: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.582: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.586: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.586: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.591: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.592: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
examining image...
*Aug 2 11:50:40.595: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.595: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
*Aug 2 11:50:40.603: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.581: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGE
%Error opening lwapp:/c1140 (Incorrect Login/Password)
archive download: takes 6 seconds*Aug 2 11:50:30.581: %LWAPP-3-CLIENTERRORLOG: Retransmission count for type (I
MAGE_DATA) exceeded more than max(1)*Aug 2 11:50:30.581: %LWAPP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.582: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:30.586: %LWAPP-3-CLIENTERRORLOG: not receive read response(5)
*Aug 2 11:50:30.586: Image could not be downloaded: LWAPP goes back to discover
y
*Aug 2 11:50:30.590: lwapp_image_proc: unable to open tar file
*Aug 2 11:50:30.591: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Aug 2 11:50:40.595: %CAPWAP-3-ERRORLOG: Go join a lwapp controller
*Aug 2 11:50:40.595: %LWAPP-3-CLIENTERRORLOG: Set Transport AddressCalled
examining image...
*Aug 2 11:50:40.602: %LWAPP-5-CHANGED: CAPWAP changed state to JOIN
*Aug 2 11:50:24.578: %LWAPP-5-CHANGED: CAPWAP changed state to IMAGEHi Magnus,
Support for the 1140 series has not been added to the 5.2.157.0
The WLC version code
http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn52.html
I think 5.2.193.0 or 7.0.48.0 or 6.0.199.0 would be recommended.
See you soon!
Rob
-
Upgrade for the WLC code questions
We 6.0.132 (lastest) WCS and our controllers are on 4.2.130, we now to upgrade to deal with sometimes, but don't want to capwap yet.
Question 1: what is the last exit LWAPP code?
Question2:Whats the differences between 4.2.207 (support page for cisco said it's the latest version), but it has same releases with ie 6.0 how it works it is very confusing workout a way to upgrade to higher versions
See you soon
Hi Tyrone,
I'm not an expert on the management of versions, but here are some basic in response details
at your request
4.2.207 is the last version on the Train of 4.2 and is without doubt an excellent choice
If you are avoiding CAPWAP for now. You will see in the link below which
There are several 'simultaneous' for the WLC Trains (and most of the Cisco product). People
were not big fans of the first Trains 5.x (quite buggy) and was introduced to CAPWAP
in 5.2 and the attacker thus is why 4.2.207 seems to be a good choice for you
In the later version or 5.2 controller software version, Cisco lightweight access points use the IETF control and commissioning of Access Points (CAPWAP) standard protocol to communicate between the controller wireless and other points of light access on the network. Versions software controller before 5.2 use the Lightweight of Point access (LWAPP) Protocol to these communications.
CAPWAP, which is based on LWAPP, is a standard and interoperable protocol that allows a controller manage a collection of wireless access points. CAPWAP is implemented in version 5.2 software controller for these reasons:
*
To provide a path for upgrade of Cisco products that use LWAPP generation Cisco products that use CAPWAP
*To manage RFID readers and similar devices
*To allow controllers to interoperate with third party access points in the future
LWAPP compatible access points can discover and join a CAPWAP controller, and conversion to a controller of CAPWAP is transparent. For example, the process of discovery of controller and firmware download process when using CAPWAP are the same as when you are using LWAPP. The only exception is for layer 2 deployments, which are not supported by CAPWAP.
You can deploy CAPWAP and LWAPP controllers on the same network. The CAPWAP compatible software allows access points join to be a controller running CAPWAP-LWAPP. The only exception is the Access Point Cisco Aironet 1140 series, which takes in charge only CAPWAP and joined so only controllers that run CAPWAP. For example, 1130 series access point can reach a controller running CAPWAP or LWAPP considering that access of series 1140 point can join only a controller running CAPWAP.
http://www.Cisco.com/en/us/products/ps6366/products_qanda_item09186a008064a991.shtml
4.2.207 was released on July 24, 2009 which makes the new second version available on any train.
http://www.Cisco.com/en/us/products/ps6366/prod_release_notes_list.html
See you soon!
Rob
-
Limitation period for H-HARVEST stand-alone mode
Hello
We have a customer who is to evaluate a Motorla vs Cisco wireless solution. He said that a Motorola AP can operate in stand-alone mode for 48 hours. He lost after communication to the controller. Is there a limitation like this with a 2500 controller and the solution of access points 1140 series?.
Y at - it any reference to show?
Concerning
Luis Noriega
Not that I know... but here is a link to the limitation of the h-reap/FlexConnect:
Thank you
Scott
Help others by using the rating system and marking answers questions as 'response '.
-
I received my new gear CISCO Aironet 1140 AP as well as Wireless Lan Controller. During the installation of the devices, I ran into a subject to obtaining of POE working. For each AP, we have an air-pwrinj3 inline power injector. After installation guide, I can say with the wiring chat will feature on the injector port in on the AP Ethernet port.
The AP feeds not on and the device on the injector status indicator remains off. The injector is me has power and the power status indicator is green.
Have tried this, use several APs and several poe injectors and have run out of ideas. APs power well when getting POE from the Wireless LAN Controller device or when the electrical connection to the AP directly from the power supply.
Don't know what else to try.
Thank you
Sarah
Hi Sarah,.
Unfortunately, the series 1140 requires the most recent power AIR-PWRINJ4 = injector
http://www.Cisco.com/en/us/prod/collateral/wireless/ps5678/ps10092/at_a_glance_c45-504087.PDF
See you soon!
Rob
-
Switching to Apple Watch series 1 series 2
What is the process of change in the spy series 1 series 2 on the same iPhone? I need to preserve all data from fitness. Cannot find procedure anywhere.
Hello
- Cancel your original Apple Watch matching using the app shows on your iPhone:
- Your watch will be saved on your iPhone before be erased, including the abolition of the blocking of the Activation.
- Cancel the twinning of your iPhone - Apple and Apple Watch Support
- Then connect your new Apple Watch, choosing the option to restore from backup during the whole upward:
- Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
- Set up your Apple Watch - Apple Support
It is worth noting that the historic activity and health data on your iPhone, not on your watch.
- Cancel your original Apple Watch matching using the app shows on your iPhone:
-
Strava and series 2 Watch without iphone
Series 2 Watch, save and upload to Strava just like a Garmin watch? Don't want to carry the phone and wear shows.
Hello
To learn the features of Strava app and the extent to which it supports the features of Apple Watch Series 2, I suggest that you consult app description and management of the resources of the developer:
- Strava app: https://itunes.apple.com/us/app/strava-running-cycling-gps/id426826309?mt=8
- Strava support: https://support.strava.com/hc/en-us
If you can't find the information you're looking for, I suggest you ask the developer directly.
-
You can get siri on the Apple Watch (series 2) to make a phone call, but do it on your iPhone, so when you're behind the wheel, he would then come through car speaker?
You can also long are you your phone is connected to the car blu tooth. Not tried myself.
-
Apple Watch series 2 measure gain altitude or altitude?
Hello
I'm confused, the 2 series watch is not supposed to have a barometer, but today after I watched a training session (open air cycle) in the activity of application on my iPhone I saw 'elevation' win (622 m) and it was there (compared to a parallel measure with a Garmin 920XT). I registered the workout on the watch, but had my iPhone (6s) in my pocket. So the series 2 Watch measures altitude/elevation or he draws the data from my iPhone... I'll experiment more, without taking my iPhone along next time.
During this time, is that what someone did similar comments?
And of course, I would be grateful for any help on how to export training sessions (write to GPX etc.).
Thanks and best wishes
Yes, the watch/app will draw altimetry from your phone when it is within range.
-
Apple Watch series 2 protective case
Hello
Has anyone found a real Apple Watch S2 case? You are looking for a minimalist design, to display the watch itself without inhibiting its look, then perhaps a clear case (case bumper or other) will do.
All cases online specify that they are cases Apple Watch S2, but look further into what they are not, as many of them do not account for the new air port (hole on one side, not two) and are also not the right depth, and cutting a port speakers are designed for S1 S2 not.
You will need to protect my camera, I do use it in the gym a fair bit and worry about the damage.
Thanks guys and girls!
Hi RudeBwoy!
I had the same problem. As far as I can see, case or bumper for the AW 2 series do not exist. I talked to Spigen, catalyst and a couple of others and any sites third 3rd say... manufacturers confirm that their AW products are NOT compatible with series 2 Watch, and that they are working on it!
All thoughts of good screen protectors? !! They would be compatible? Some protection is better than nothing!
Let me know if you hear anything!
Thank you
-
TNX
Hello
Swimming workouts
Begin a swim practice in the application of the workout on Apple Watch series 2 models automatically activates the lock of the water, which locks the screen to avoid accidental interactions during your workout.
To complete your workout and to evacuate all the water:
- Press the digital Crown and side button at the same time (which makes a break from the workout).
- Turn the digital Crown, which opens the screen and erases all the water inside of the watch (it can make a sound).
- Forehand and press end.
Other swimming
If you plan to get your Apple Watch series 2 wet in other circumstances that when training of swimming - as to the course of General wear in a pool - you can manually lock the screen first and then drain the water from the speaker subsequently:
- Slide up from the bottom of the face of the watch to open Control Center > tap water from lock to lock the screen.
- When you're done: turn the digital Crown to unlock the screen and drained the water from the speaker.
- The lock can also be unexpected water activated and unlocked immediately after exposure to the water.
After bathing, make sure to clean your Apple Watch series 2 by rinsing them with hot water from the tap. Watch and the band should be dried with a non abrasive and non fluffy cloth.
Strips of leather and stainless steel (Milanese Loop and Bracelet links) are not water resistant, so should not be worn when swimming.
More information:
Work with your Apple Watch - Apple Support
-
Wake up the screen on the Crown of the Apple Watch Series 2 is not displayed
Watch app (iPhone 7 iOs 10) not the screen showing wake on the Crown of the Apple Watch Series 2 (look at OS 3)!
What's wrong?
Thank you
Hello
If you want to organize the presentation of the application on your Apple Watch using the app shows:
- On your iPhone, in the application of the watch, go to: My Watch (tab) > presentation of the App.
-
I have a friend that is considering a 2 Apple Watch series. It will systematically use a Board during training for her swim meets. The new Apple Watch will follow distance and calories correctly even if it does not use his arms while swimming with a surfboard?
I used my series 2 during my bath today for the first time. It does a great job of tracking my laps... freestyle, free with paddles and open palms. But he is not one of my kicks. I threw it only Dolphin on my back (without arms). I swam more than 250 kick 3500yds, it does not register at all. Next time I might try on my stomach, but without a Board of Directors and use my arms a little to breathe. Overall I was impressed but.
Maybe you are looking for
-
most recent version of iTunes has not recognized by iPhone
I have the new iPhone 6 s. I also have a MacBook Pro. The first time I plugged the new phone to the computer, a message from iTunes saying "the iPhone is useless because it requires a newer version of iTunes." I went to itunes.com and downloaded the
-
NETGEAR cd3000dv2rg on twc, what do mean?
Error codes Time priority descriptionTue Feb 16 18:08:59 2016 warning (5) Admin login authentication failTue 16 Feb 09:23:30 error 2016 (4) Miss BP Configuration setting Type TLV: 17,8; CM - MAC is c4:04:15:37:d1:50;. CMTS-MAC = 00:01:5 c: 64:92:66;
-
I need the driver for ethernet controller and network controller driver, driver pci device video controller for Windows 7 Home Premium 64 bit driver Someone please help PCI\VEN_10EC & DEV_8136 & SUBSYS_148A103C & REV_04PCI\VEN_10EC & DEV_8136 & SUBSY
-
I have a windows xp, I can't start my computer needs dll files using core plese
I need dll files required for the core windows xp lab plese top of page help
-
I recently bought t41 eBay seller said it worked fine, but when it happened does not start flashing screen cdrom power light and green battery really don't know if it's to suspend or sleep mode used external unsuccessfully monitor all help Maybe some