AIR-LAP1142N-E-K9 v03 not join WCS 5.2.130.0

Similar Questions

• AIR-LAP1142N will remain not associated with WLC 4402

  We put six new AIR-LAP1142N on network access points.  We have other models of access points in line, and they are very well 4402 log shows that the 1142 s are constantly associate and disassociate. I can see their mac addresses in the list of wireless access. Sometimes I can even see their details. The product ID and the serial number is not.  They have an IP address.

  I've updated the controller to 4.2.209.0 software, but it made no difference. What is the problem here?

  Oh, it's average... 1142 s ONLY works with 5.2 code or ONLY most recent...

  Please rate the post if this was helpful... Thank you

• Inconsistent WLAN controller with AP 'AIR-LAP1142N-E-K9.

  Hi all

  We have awireless LAN Controller "Cisco 4402 with software version 3.2.150.10" we use the Access Point 'AIR-LAP1242AG-E' and his works fine, we bought the new APs with the model "AIR-LAP1142N-E-K9" but its not working with our controller and restart continuously. I connected the console and checked the logs from the console that is given below. Please let me know is this controller WLAN is compatible with the APs new or not, or do I need to upgrade the operating system of the LAN Controller and if I upgrade the operating system of the WLAN controller it will support the old APs or not.

  Thank you in advance for your response and support.

  32K bytes memory simulated by flash not volatile configuration.
  Basic Ethernet MAC address: C4:7 D: 4F:3 A: 9E:D0
  Part number: 73-11451-08
  Kit numbered PCA: 800-30554-06
  Revision number of PCA: A0
  Serial number of PCB: FOC14080B1U
  Top Assembly part number: 800-31273-04
  Top of page the Assembly serial number: FCZ1414W1X5
  Top of page revision number: A0
  Product/model number: AIR-LAP1142N-E-K9
  % Please first set a domain name.

  Press RETURN to get started!

  * 00:00:06.561 Mar 1: * CRASH_LOG = YES
  MAC Ethernet address of base: C4:7 D: 4F:3 A: 9E:D0

  * 00:00:06.749 Mar 1: % LWAPP-3-CLIENTEVENTLOG: reading and initialized event AP log (contains 82 messages)

  * 00:00:08.794 Mar 1: % LINK-3-UPDOWN: Interface GigabitEthernet0, changed State to
  * 00:00:08.810 Mar 1: % SYS-5-RESTART: System restarted.
  Software Cisco IOS, C1140 Software (C1140-RCVK9W8-M), Version 12.4 JA (21 a), RELEASE SOFTWARE (fc1)
  Technical support: http://www.cisco.com/techsupport
  Copyright (c) 1986-2009 by Cisco Systems, Inc.
  Updated Tuesday 8 June 09 16:28 by prod_rel_team
  * 00:12:08.010 Mar 1: % CAPWAP-5-CHANGED: CAPWAP changed state of DISCOVERY
  * 00:12:08.982 Mar 1: % LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed State to
  * 00:12:18.211 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface GigabitEthernet0 assigned address DHCP 172.20.20.228, mask 255.255.255.0, hostname APc47d.4f3a.9ed0

  * 00:12:28.972 Mar 1: % CDP_PD-2-POWER_LOW: all disabled radios - WS-C3560G-48PS NEGOTIATED (0026.98a6.2786)
  Translate "CISCO-CAPWAP-CONTROLLER"... the domain server (192.151.106.8) (192.151.106.6)

  Translate "CISCO-LWAPP-CONTROLLER"... the domain server (192.151.106.8) (192.151.106.6)

  * 00:12:37.968 Mar 1: % 3-CAPWAP-ERRORLOG: did not get the server DHCP server log settings.
  * 00:12:37.971 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
  * 00:12:37.973 Mar 1: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-LWAPP-CONTROLLER
  * 00:12:47.974 Mar 1: % 3-CAPWAP-ERRORLOG: go join a lwapp controller
  * 00:12:47.974 Mar 1: % LWAPP-3-CLIENTERRORLOG: put AddressCalled of Transport
  Writing of the
  * 00:12:47.981 Mar 1: % LWAPP-5-CHANGED: CAPWAP changed State to ADHERE
  * Jun 29 16:32:00.616: % SYS-4-PUPDATECLOCK: periodic update clock with ROMMON failed because size left in ROMMON (4294967295), large (29), error code (- 1).
  * Jun 29 16:32:00.616: % SYS-5-RELOAD: reload LWAPP CUSTOMER the request. Reason for charging: CONTROLLER INCOMPATIBLE VERSION.
  * Jun 29 16:32:00.616: % LWAPP-5-CHANGED: CAPWAP changed state at the bottom of the event log in NVRAM...

  using the values from the eeprom

  WRDTR, CLKTR: 0 X 86000800 0X40000000
  RQDC, RFDC: 0X8000003B 0X0000020F

  init done DDR

  IOS Bootloader - start System.
  XMODEM file system is available.

  DDR used values of the system serial eeprom.
  WRDTR, CLKTR: 0 X 86000800, 0 X 40000000
  RQDC, RFDC: 0X8000003B, 0X0000020F

  PCIE0: the connection is established.
  PCIE0: VC0 is active
  PCIE1: the connection is established.
  PCIE1: VC0 is active
  PCIEx: initialization done
  flashfs [0]: 5 files, 2 folders
  flashfs [0]: 0 orphaned files, orphaned directories 0
  flashfs [0]: Total number of bytes: 32385024
  flashfs [0]: bytes used: 2271744
  flashfs [0]: available bytes: 30113280
  flashfs [0]: flashfs fsck took 16 seconds.
  The system eeprom read cookie series... Fact
  MAC Ethernet address of base: c4:7 d: 4f:3's: 9e:d0
  Ethernet speed is 1000 MB - FULL duplex
  Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...#######################################################################################################################################################################################################################

  File "flash: / c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" unzipped and installed, point of entry: 0x4000
  execution of...
  ENET stopped

  If you have login valid ORC, go to Support > download software > > Cisco Wireless LAN Controller 4402 Wireless > Wireless LAN Controller Software

  Release notes for the controllers wireless LAN Cisco and Points of light access for version 7.0.98.0

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html

  Upgrading to a new version of the software

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp472449

  Remember messages useful rate.  Thank you.

• Question about AIR-LAP1142N-A-K9

  Hello

  I currently have a 1121 acting as a bridge to allow my wireless clients to connect to the internet via a 871. I want to improve my WAP to a model that supports Wireless N and WPA2. The more affordable model that I can find is the AIR-LAP1142N-A-K9 but, I want to confirm that this new device doesn't have a WLC to work. I don't expect that this device is like a 1121 where I attribute is an IP address and manage it from a browser or from the telnet session, no required WLC.

  Thank you!

  Hello

  To answer your question out of the box, no, it will take a WLC, you can convert to and AP IOS which would not require the WLC or simply order the device as IOS using this reference numbers...   AIR-AP1142N-A-K9

  I hope this helps. Please evaluate the useful messages.

  Thank you

  Kayle

• Max AIR-LAP1142N-E-K9 Access Point devices

  Hello

  How many Wifi devices simultaneously press a Point of access AIR-LAP1142N-E-K9?

  Thank you

  Hello

  I hope that you are looking for the maximum clients that supports the TOWER... Here flax kwhich gives you the exact information you're looking for...

  http://www.Cisco.com/en/us/docs/wireless/controller/7.0/Configuration/Guide/c70ccfg.html#wp1085099

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  updated my iPad to 9.3 air activate iPad display does not not my account information, but the Mac computer accepts my Apple ID and password

  A lot of people is affected by this problem, and Apple has worked on the issue.  Some found the following steps useful for this issue:

  Go to iCloud.com and select settings once you are connected.  Click on your device listed there and remove them from the account (not typing not erase or lost mode).  Restart your device and must ignore this lock of Activation screen because you actually disabled the lock by removing the device for iCloud.com

  I hope that helps!

• I get this error message, the backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).

  Hey get this error message

  The backup disk image "/ Volumes/data-1/jackmatz of Air.sparsebundle of MacBook ' could not be found (error (null)).

  In the context of what?

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• 1131 AP to WLC 2106. IP address is assigned, but will not join.

  the installer is: 1131 AP connected to 2106 WLC connected to the xp machine to access the console windows. for testing purposes only are not connected to the network/internet still.   the WLC will be connected to the internet eventually.
  Scope DHCP is configured and address. I can ping the management WLC AND the IP of the console of the AP ap-Manager, but can not ping the AP from the WLC console.

  I read - troubleshoot not joined Lightweight Access Point is not a wireless LAN Controller and most all other tech notes.
  I can use the commands of DEBUG on the AP but I don't see any output on the screen or to capture or see the WLC console connection IE.   Debug lwapp package activate or activate debugging capwap package but there is no output that I can see and search.

  Someone at - it ideas? Happy to post debugging logs if I can get.

  Cisco IOS Software, C1130 Software (C1130-K9W7-M), Version 12.4(21a)JA1, RELEASE
  

  This is your culprit.   The IOS that you are running is an autonomous access point.  You need to load/run the IOS LWAP.

  ... And you don't need to be a Nobel Prize winner to convert AP LWAP autonomous access point.

  1. download the IOS correct.  The IOS LWAP has the prefix "RRs" in its file name.

  2. copy the "RRs" image in your access point using the command ' archive download-sw tftp: / /.tar.

  3. make sure that the boot variable changes for a startup to the image of "RRs".

  4 charge your AP.

  Be sure to note our useful messages.   Thank you.

• How add and configure a new controller AIR-LAP1142N-E-K9 Access Point WLAN-AIR-WLC4402-12-K9

  How add and configure a new controller AIR-LAP1142N-E-K9 Access Point WLAN-AIR-WLC4402-12-K9

  'option 43 hexagonal f104c0a80a05' looks right to me...

  If you're talking about only a few APs, you could hold the AP in the same vlan as the WLC Management Interface and allow discovery by diffusion...    Once he knows the controller you could put in a different subnet and you don't even need option 43.

  But then again, Option 43 I guess is a safe bet to ensuring that the always AP knows an IP address to find out.

• Can not join the domain of the Hyper-V virtualized system

  Hello!
  I have a domain controller active directory (adserver) in my ws12 network, and I have another physical server (server) also runs ws12 who is able to join the domain, but the virtualized systems can not.
  DNS and other settings are ok (identical to what is implemented on the server) and made the flush and registerdns steps. I even tried to add the host name of the dc and the name of FQDN for hosts files.
  I type in the domain (gczinege) and I'm able to type in the username and password. After awhile the virtualized pc SAIS: could not join the domain - not found network path
  I feel there is something with the installation of hyper-v or network server.

  Thank you all.
  I solved the problem, first I was promoting to a domain controller and to be in the area and that the installation of hyper-v after everything went well.
  Best regards.
  g

• Discover the State of the agent (18) composer initialization error: could not join the domain (expected 815 seconds)

  Hi all

  My Active Directory, View Manager, composer and vmware vcenter are all on windows 2008 R2.

  I took a spanshot of Windows XP SP3 with DHCP setting, installed vmware tools, see agent installed, firewall disabled, the Member of domain etc.

  When I tried to clone the snapshot XP to several XPs with the pool creation process it get error in personalization with error, below

  *03/10/10 18:01:49 IST: View Composer agent State (18) initialization error: could not join the domain (expected 815 seconds)*.

  Help, please.

  Thank you

  Selim Desai

  VCP410

  Take a look at http://communities.vmware.com/message/1613937

  the solution has been http://support.microsoft.com/kb/944043/en-us

  André

• Virtual Center Server not joined to a domain

  The environment is ESX 3.5 update 5 and Virtual Center Server 2.5 update 5.

  My question is; Virtual Center Server 2.5 can be installed on a W2003 server that is not joined to a domain?

  If the installation is possible what are the disadvantages and consequences?

  At a later date, the server can be attached to a field and Virtual Center updated accordingly? Thanks,-Jeff

  My question is; Virtual Center Server 2.5 can be installed on a W2003 server that is not joined to a domain?

  Yes.

  If the installation is possible what are the disadvantages and consequences?

  Depends on if you are using ad groups / users to connect to vcenter.  Otherwise, you must use local accounts for vCenter to provide user access to your vCenter cluster.  Adding the vCenter in the field would facilitate this in the future add / secure users.

  and Yes, you can join vCenter to the domain at any time, but it requires a reboot...

• manage the server could not join the multicast cluster)

  Help me please...
  I have a problem with my cluster (multicast).
  When I started managing the server, I found the error message "could not join the dizzycluster address 239.192.0.0 cluster due to: java.net.SocketException: option to set the error..."
  I don't know what I'd do,

  Make sure that the multicast works between your two servers using this utility of Weblogic.

  http://WebLogic-wonders.com/WebLogic/2010/12/07/multicast-test-on-the-network/

• AP is not join my controller

  My WLC is AIR-CT-2504 soft version 8.0

  AP is AIR-CAP1702I-C-K9

  Internal DHCP using at the WLC.

  AP is not to join

  Here is the output showing AP. What should I do to solve the problem?

  AP5c83.8f38.0a98 >
  * 2 jan 22:42:45.999: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2214 retransmission count Max reached for the 0x59AFA94 connection!

  * 2 jan 22:43:15.999: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 192.168.14.5:5246
  * 2 jan 22:43:35.999: AP a MIC SHA2 certificate - use SHA2 MIC for DTLS.

  * 2 jan 22:43:36.000: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.14.5 peer_port: 5246
  * 2 jan 22:44:05.999: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/DTLS/base_capwap_dtls_connection_db.c:2214 retransmission count Max reached for the 0x59B0A90 connection!

  * 2 jan 22:44:35.999: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 192.168.14.5:5246
  * 2 jan 22:44:35.999: AP a MIC SHA2 certificate - use SHA2 MIC for DTLS.

  * 2 jan 22:44:36.000: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 192.168.14.5 peer_port: 5246
  * 2 jan 22:44:36.103: % CERTIFICATE_INVALID_NOT_YET_VALID-3-PKI: certificate chain validation failed.  The certificate (SN: 10A26FD200000004825B) is not yet valid period of validity begins at 02:38:37 UTC Sep 11 2015Peer certificate verification failed 001 a

  * 2 jan 22:44:36.103: DTLS_CLIENT_ERROR:... /CAPWAP/base_capwap/CAPWAP/base_capwap_wtp_dtls.c:496 verified certificate failed!
  * 2 jan 22:44:36.103: % DTLS-5-SEND_ALERT: send FATAL: bad certificate alert at 192.168.14.5:5246
  * 2 jan 22:44:36.103: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 192.168.14.5:5246

  Hello

  It seems that the DTLS/tunnel WLC AP does not form.

  you have set up on WLC of NTP?

  check it out by going on controller > NTP > Server.