1150222698 SRX ID case - none of my executables work

Similar Questions

• Could not find any number on the box that begins with 1057, none of the other work numbers as a "serial number".

  Could not find any number on the box that begins with 1057, none of the other work numbers as a "serial number".

  Serial numbers are normally only applies to the case of the disc.  If you do not find the case of disk while you might be dealing with a scenario of redemption code... depends on where you bought the software and what is the software.

  Quickly find your serial number

  Using redemption code

• iPod stopped playing in the middle of a song. The screen still shows the song. None of the buttons work. Cannot close the iPod is facing down. How can I fix it?

  my iPod, the generation classic 32 GB, stopped playing in the middle of a song. The screen is stuck on this song. None of the buttons work.  I can't stop the iPod.  How can I fix it?

  Hi, lesliefromhowell!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your iPod Classic does not. I count on my iPod for music on the go and want to make sure that you can use your own without problem!

  Relying on the buttons have not helped get the iPod to start playing or to restart, please follow the steps outlined in the article below to reset your iPod.

  Learn how to reset your iPod

  You'll want to use the instructions under the "iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)" section. These instructions are the following:

  iPod, iPod (scroll wheel), iPod (touch wheel), and iPod (dock connector)

  To reset your iPod, follow these steps:

  1. Slide the Hold switch to the locked position and then come back!
  2. Hold down Menu and Play/Pause all buttons until you see the logo Apple/iPod (about 6-8 seconds). You may need to repeat this step.

  If you can always reset your iPod, follow these steps:

  1. Connect your iPod to a power adapter and plug the adapter into a power outlet.
     You can also connect your iPod to your computer. Make sure that the computer is on and that it is not set to go to sleep.
  2. Try resetting your iPod again.

  Good listening!

• Portege M100 - none of the drivers work

  None of the Vista drivers work for Windows 7, so I switched to XP Professional and always SOME drivers don't work?

  Is there a special way to install after installing Windows?

  see you soon

  Hi ollie,.

  It would be interesting to know what you mean with none of the drivers work. You get an error message or what is exactly happening?

  Regarding the issue of Windows 7 I think that it of normal that Vista drivers do not work for Windows 7 because the Portege M100 is very old notebook, so I doubt that Windows 7 will work on this subject.

  Moreover, the Toshiba site, you will find an installation instructions document. Use this list a driver installation order is recommended.
  Check this box!

• I want to cancel my subscription to Stan coming through iTunes to my Apple TV.  None of the instructions work.  Can someone give me another method?

  I want to cancel my subscription to Stan coming through iTunes to my Apple TV.  None of the instructions work.  Can someone give me another method?

  What do you mean by "presented guidelines? Here is a support article on how to manage subscriptions:

  View, change or cancel your subscription - Apple Support

  See you soon,.

  GB

• None of my apps work after that my laptop has been infected with the virus Vista Internet Security 2010,

  Hi all
  I need help to get my computer back to normal.

  My laptop has been infected with the virus Vista Internet Security 2010, but I removed it, NOW none of my apps (Yahoo Messenger, trash, other folders, SYSTEM, all file icons restore,) work, I managed to get rid of the virus visa, but still none of the programs work. When I try to open any program, it displays an error message "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel. " I did all the steps, but still nothing works now all my files are open with the same file. I try to download a program to fix this problem, but I'm not able to run cause keep giving me the same error and cannot download anything. Is it possible to recover my computer as usual. Any help much appreciated.
  Help, please.
  Oh also all the icons on my destop are replaced by the same feacture of icon, but the name of the icons are staying same.if it shows adobe icon and all icons are adobe, when I open it with ie, then everything will change IE also. even if the opening programme has also changed to the same icon as dekstop one. now all my things are open with yahoo messenger:(c'est fou:()

  Try restarting your PC and press the F8 key repeatedly and then start in safe mode with networking and download and comprehensive performance analysis with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If this does not work, try to run Windows Defender version offline beta:

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  You can take a look at:

  http://cyberdefend.WordPress.com/2012/01/07/boot-Windows-for-scan/

  If the problem has not resolved, then contact Support for Microsoft Security:

  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetymalware&task=Diagnostics&mkt=en-us&St=1&wfxredirect=1

• I have an account and pay the subscription each month. I have a laptop and desktop and both gave me access to my programs and now for some reason any my office won't let me connect and none of my programs work on my desk?

  I have an account and pay the subscription each month. I have a laptop and desktop and both gave me access to my programs and now for some reason any my office won't let me connect and none of my programs work on my desk?

  You are one of the very few who would get an answer to your problem. I had a similar problem that it resolved itself.

  I haven't used my laptop for a while and during a power outage, I wanted to us my laptop. He did not move.

  Problem is that due to the power failure my internet wasn't working.

  Connecting Wi - Fi has been restored my laptop have been updated and everything worked again.

  Make sure you have internet connection on both computers.

• run_job fails with permission denied for an executable work as a non - dba user

  I am running Oracle 10.2.0.4 on RHEL 5.5 32-bit and seeks to convert some of Oracle Scheduler cron tasks, but get a permission denied error during the execution of the work.
  
  To simplify things as much as possible, the below shows a work with a call to an executable shell script. The shell script was simply a calendar of Unix command, however, so it works from the command line, as well as the command-line as 'oracle' user, I get the following error:
  
  TEST: OPS$ BATCH_USER > exec dbms_scheduler.run_job ('my_test_job');
  BEGIN dbms_scheduler.run_job ('my_test_job'); END;
  
  ERROR on line 1:
  ORA-27370: slave to the job could not launch an EXECUTABLE type work
  ORA-27300: dependent operation of the OS system: access to the wrapper of extjob failed with status: 13
  ORA-27301: OS Error Message: permission denied
  ORA-27302: an error occurred at: sjsec 3
  ORA-06512: at "SYS." DBMS_ISCHED", line 150
  ORA-06512: at "SYS." DBMS_SCHEDULER', line 441
  ORA-06512: at line 1
  
  I noticed that if I create work under another account Unix which is the dba group and update the externaljob.ora run_user and run_group = s/n, the task runs without error.
  
  I assume that it is possible to run executable tasks in o/s as a group of users outside the dba (or oinstall)?
  
  Below are the details of what I did. If you would be grateful if someone can point me in the right direction. My apologies if I'm missing something obvious here...
  

  Create simple job
  
  TEST: OPS$BATCH_USER > !cat create_test_job.sql
  begin
    dbms_scheduler.create_job (
      job_name            => 'my_test_job',
      job_type            => 'EXECUTABLE',
      job_action          => '/home/batch_user/dba/v2_dba_tasks/run_script.sh',
      start_date          => NULL,
      repeat_interval     => 'freq=daily; byhour=8; byminute=30',
      end_date            => NULL,
      enabled             => TRUE);
  end;
  /
  
  TEST: OPS$BATCH_USER > @create_test_job
  
  PL/SQL procedure successfully completed.
  
  File permissions...
  -rw-r--r-- 1 root oinstall 1537 Feb 28 13:38 /u04/oracle/product/10.2.0/db_1/rdbms/admin/externaljob.ora
  -rwsr-x--- 1 root   oinstall 871282 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extjob
  -rwx------ 1 oracle oinstall 871282 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extjobo
  -rws--s--x 1 nobody nobody   871322 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extjobO
  -rwx------ 1 oracle oinstall 871322 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extjoboO
  -rwxr-x--x 1 oracle oinstall  29910 Aug 22  2010 /u04/oracle/product/10.2.0/db_1/bin/extproc
  -rwxr-x--x 1 oracle oinstall  30130 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extprocO
  -rwxr-xr-x 1 oracle oinstall    327 Jan 28  2009 /u04/oracle/product/10.2.0/db_1/bin/extusrupgrade
  
  
  For testing, I'm just doing a Unix calendar command...
  [batch_user@test v2_dba_tasks]$ cat run_script.sh 
  #!/bin/sh
  
  /usr/bin/cal
  
  
  Contents of $ORACLE_HOME/rdbms/admin/externaljob.ora...
  [root@test admin]# grep '^run' externaljob.ora 
  run_user = batch_user
  run_group = comp
  
  The Unix account is not in the dba or orainst group ('comp' group only).
  
  Run from O/S...
  [batch_user@test v2_dba_tasks]$ ./run_script.sh 
     February 2011    
  Su Mo Tu We Th Fr Sa
         1  2  3  4  5
   6  7  8  9 10 11 12
  13 14 15 16 17 18 19
  20 21 22 23 24 25 26
  27 28
  
  Run as 'oracle' user...
  [oracle@test v2_dba_tasks]$ ./run_script.sh 
     February 2011    
  Su Mo Tu We Th Fr Sa
         1  2  3  4  5
   6  7  8  9 10 11 12
  13 14 15 16 17 18 19
  20 21 22 23 24 25 26
  27 28
  
  But running from scheduler results in error...
  TEST: OPS$BATCH_USER > exec dbms_scheduler.run_job('my_test_job');
  BEGIN dbms_scheduler.run_job('my_test_job'); END;
  
  *
  ERROR at line 1:
  ORA-27370: job slave failed to launch a job of type EXECUTABLE
  ORA-27300: OS system dependent operation:accessing extjob wrapper failed with status: 13
  ORA-27301: OS failure message: Permission denied
  ORA-27302: failure occurred at: sjsec 3
  ORA-06512: at "SYS.DBMS_ISCHED", line 150
  ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
  ORA-06512: at line 1

  Hello

  The run_user specified in externaljob.ora don't have to be a member of the oinstall group.

  I think you can run into a problem specific to run_job with use_current_session-online set to true when the local OS user running sqlplus is not a member of oinstall.

  The same error occurs with a background task run (for example use_current_session-online fake)? Occur if you are using sqlplus from another machine?

  Thank you
  Ravi.

• disk KERNEL_DATA_INPAGE_ERROR error & non-system but everything works OK for a while

  Hello

  can someone please help me because I have a deadline Coming up and need of my laptop works properly!

  I have windows 7 64 bit running on an HP ProBook 6550 b. My PC works fine for about an hour, after an hour, the screen freezes for 10 seconds and then I get the KERNEL_DATA_INPAGE_ERROR. It reboots and then I get the message "Non-system disk or disk error."

  So I just shut down my PC and pitch up and everything works perfectly fine again for about 45 minutes. Then the same problem again.

  I tried several things. I run a chkdsk /f /r it find some issues. I tried and followed some knowledge how to change the paging file settings. I ran a memtest. No error with the memtest.

  Finally, I went into the BIOS and I did a test drive HP. It has almost immediately, but I can just close the BIOS and boot my PC and windows works fine.

  What can I do to fix this other then buying a new hard drive. (I intend to buy a new laptop anyway in a few months after that I spent my time and trial period is over. "(Mais à court terme j'ai vraiment besoin cela fonctionne)."

  Thank you very much!!

  Johan

  Just in case someone else encounters this.

  The problem was due to my hard drive SSD M4. There was a problem with the firmware causing crashes time after that the disk has been used for several hours then +-5200. The firmware upgrade fixed it for me.

• ORA-27369: failure of the EXECUTABLE work

  Please review the following test case:
  
  A shell script named: test.sh

   
  #!/bin/ksh 
  . /home/oracle/.profile 
  echo `date` > /tmp/result.txt 

  He has successfully completed during the race, the shell script command line, and redirect the current date in the text file.
  
  [dm01db01:oracle@psdwh1/dbfs_scripts/mnt/dba/scripts/bin] $ cat /tmp/result.txt
  Mon 6 Aug 21:50:45 IDT 2012
  
  
  Then, I created a scheduler that runs the SAME shell script:
  

   
  CREATE OR REPLACE procedure CRM.run_test 
  is 
  v_job_name  varchar2(20); 
  Begin 
         v_job_name := 'run_my_test'; 
          dbms_output.put_line('v_job_name='||v_job_name); 
          DBMS_SCHEDULER.create_job ( 
                  job_name        => v_job_name, 
                  job_type        => 'EXECUTABLE', 
                  job_action      => '/dbfs_scripts/mnt/dba/scripts/bin/test.sh', 
                  start_date      => SYSTIMESTAMP, 
                  enabled             => false, 
                  auto_drop           => true); 
              dbms_scheduler.enable(name=>v_job_name); 
  end; 
  / 
  
  
  SQL> exec CRM.run_test ; 
  v_job_name=run_my_test 
  PL/SQL procedure successfully completed. 

  Addional_info in dba_scheduler_job_run_details shows the following error message:
  

   
  ORA-27369: job of type EXECUTABLE failed with exit code: Key has expired 
  STANDARD_ERROR="/dbfs_scripts/mnt/dba/scripts/bin/test.sh: line 3: date: not found 
  {code} 
  
  I made the following change in the shell script : /bin/date 
  
  {code} 
  #!/bin/ksh 
  . /home/oracle/.profile 
  echo `/bin/date` > /tmp/result.txt 
  {code} 
  And now the script finished successfully . 
  
  Obviously it succeeded beacuse now the job has the full path to linux date function. 
  But why its work with no need to change the code while running it directly from command line ?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                            

  Please refer to the notes 739402.1
  It is said we nee to specify the full path or export the PATH variable in your shell script.

• Some non-32-bit effects working as 32-bit in CS6.

  I noticed that some first cs6 effects which ARE NOT labeled as 32-bit effects act as 32-bit effects.

  For example: you put 10-bit images in a sequence that has "the max bit depth" enabled for previews.  You add fast color corrector, which supports "32-bit floating point", and change the levels to make extreme contrast.  It creates nice, smooth gradients.  Then come on in sequence settings and uncheck the box 'bit depth of max' and you'll see smooth once degraded tower to a mess taped, because now you can see all 8 bit.  The same phenomenon occurs for export, depending on whether the "bit max depth" is enabled or not in the export settings.

  As I understand it, the way it SHOULD work is this: "max bit depth" enabled (showing again the beauty of 10 bits), you place a non - 32-bit on the clip effect and the video SHOULD show all return to the ugliness of 8 bits.  The Adobe manual says something other than 32-bit effects replaces all other effects and displays / makes 8-bit video.

  The stange thing is... some non-32-bit effects seem to maintain smooth gradients and NOT go back to 8 bits.  Sharpen and tone dark / light tones are just a couple of a bunch that seem to run as 32-bit effects.  Some of them, like culture, do not show 8-bit unless you select Control Panel (highlighted) the effect of the effect... when it is not selected, it offers 10-bit.

  I only use 32-bit effects in the fear that if I use something else (like the effect of sharpness and others) I would turn my 10-bit 8-bit sequences.  But it seems that this is not the case?  Any thoughts here?

  Fix

• My case smart apple has stopped working on my iPad 2 Air

  my smart apple case stopped working on my iPad air two someone know why

  Not sure - without more details

  When you bought it and what guarantees it come with?

• Executable work on a laptop, but not on the other

  Hi all

  I have a project of labview in which the main program calls the second program, I use the shared variable to share information between these programmes and made an executable file, the problem I am facing is that works execuatble on the machine where it is made, but on another machine. Y at - it no problem using variables shared in the executables. ? Please let me know.

  Thank you

  Ankit

  
  

• Need help my e-mal cases. reset password does not work.

  How can I case my email I tried to reset password does not work. I forgot my password and it is entered repeatedly. I want to be to my e-mail or deleate my account. Help, please.

  Hello

  Is Hotmail or Windows Live Mail email? If this is not the case, contact the mail provider.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  ------------------------------------------------

  Windows LiveMail has its own Forums, so you can ask your questions there.

  Windows Live Mail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solution Center - Solutions mail - Mail Forums
  http://windowslivehelp.com/

  Windows Live Mail - mail Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  I hope this helps.

• message usb device not recognized guard appearing, none of our devices work

  None of our usb ports work so that we cannot use the printer, mouse, or plug in our camera we get the message this device is not recognized. We have a laptop

  Hello

  Check the settings/configuration (BIOS/CMOS) that get started - often F2 so watch you start screen.
  Check that the USB is enabled. If these methods fail you will need a real computer store
  (not the leeks and the glances at a BestBuy or other big box stores) or Technical Support from the manufacturer of the system.

  ------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  Do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. You can remove all instances of any individual device and then restart to see
  If this device activates.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.