11g on GNU / linux

Similar Questions

• Acer Aspire 5741 G too hot temperature with Debian GNU/Linux

  My Acer Aspire 5741 G would become too hot using Debian GNU/Linux.

  Any ideas on how to get the same cooling effect as with Windows 08/07/10?

  Using Microsoft Windows, it is never too hot and I suppose it has something to do with the control of the fans of the laptop.

  Had no luck with the bios, but it looks like I solved the problem for now.

  For those who have a similar problem, here is my solution:

  1. I installed the driver real official owner of AMD for the ATI Mobility Radeon HD 5470.

  2. I completely disassembled and cleaned the laptop then assembled again.

  Now, I have worked with him for more than 6 hours and I can't have more than 50 degrees celsius in all hearts.

  I think / hope that should do the trick until the end of the lifetime of the laptop.

  Thanks to the community for your thoughts.

• HP Officejet 5740 e-all-in-one: HP digital Fax must be set to record on a GNU/Linux (Debian)?

  I used to have a printer of the 8500 series (if I remember correctly) that can be configured from the web interface to save on a standard network share (CIFS/Samba).

  Some recent HP with capacity fax printers seem to be able to record in such an action on the network, but the documentation implies that only works on a Windows system with the HP software. It seems that the software configures only a standard Windows share to be accessible on the network.

  Can it be set up a GNU/Linux system (NAS, server, etc.) without using Windows at all? How? Is there a shared resource naming convention, working group, etc. ? I can't find any references to this.

  Edit: I found the installation steps of filing for my old digital printer, I wonder if there is something similar (or the same) in the user Web interface of the newer printers.

  Ultimately I just installed a basic print/scan/copy printer (Envy 4500 series) that complements USB modem-Fax + eFaxGTK well. The only element missing from the old system is direct fax from the printer (now requiring a print + rescan to fax via eFaxGTK) and do not have a document feeder.

  Use and OfficeJet pro introduces new problems:

  * Lack of history for faxes sent

  * Don't fax not working from the PC (I'm report a bug on this subject)-Gnu/Linux fax queue was aways "Paused".

  * Fax backend related to HP printer (if the printer fails, no guarantee a new printer will use the same procedures to receive faxes, etc.)

  None to retrieve faxes in memory of the printer of Gnu/Linux

  * Address book related to the printer, not accessible/modifiable/Sync with the implementation of HPLIP

  It's a shame HPLIP these poor support for these multifunction printers fax

• How to find all the OBIEE ports in GNU / Linux

  How to find all the OBIEE ports in GNU / Linux?
  
  Thank you
  Jay.

  Hi Jay,.

  Did you check that?

  http://blog.Trivadis.com/b/andreasnobbmann/archive/2009/02/26/ports-used-in-OBIEE.aspx

  Rgds,
  DpKa

• The upgrade of 9,2.0.6 (HP - UX) to 10g or 11g on Redhat Linux?

  In general, what are the steps to pass 9,2.0.6 (HP - UX) to 10g or 11g on Redhat Linux?
  
  I can the database on 9.2.0.6 exp (HP - UX) then imp of the database to a new database of 10 / 11g (RedHat Linux)?
  
  It's the easiest way?

  Well Yes you can do it. You will be able to use transportable tablespaces for her. You can convert same rman.

• GNU/Linux drivers for Tecra R840-10 t PT429E-00M007EP

  Toshiba and ForumFolk greetings.

  I am considering buying laptop said, but I will so if I can use it with my "Other Operating System". :)

  I'm guessing that this laptop is relatively new and I can't find reliable information anywhere, so I'll try here first. What I see, Toshiba supplies only drivers are windows ones.

  FREE software drivers only go as far as HD 5890 series for the graphics card. What is the difference between HDMI and DusplayPort?

  I'm completely in the dark about the chipsets are actually used for the other components. Some drivers are supposed to be "OS independent", however, following the links for the 3G driver, I get a list of the 3 drivers/utilities for windows.

  I guess that bluetooth and WiFi (a/b/g/n or b/g/n?) will be more simple and easy to support with FREE software drivers, I hope. The manual stipulates that WiFi and Bluetooth work in the same frequencies, is it? Any risk of actual use (network dropouts, etc.)?

  I don't really like to drive Optics (or speakers and card-slot machines), but which is not being able to use 2.6 and 5.2 GB DVD - RAM?
  All the lights here?

  PS: The Toshiba laptops that do not have vents on the underside are there? It's rather silly to laptop manufacturers.

  As much as I know that the Wlan card is 802.11(a/g/n) Intel supporting BT as well.

  But why you do not use a tool of hardwarediagnostic for Linux?
  That would be the best way to get part of hardware features...

• How can I get a GNU linux serve to injest syslog data?

  We try to put up Splunk, on a GNU server, with rsyslog.   Splunk does not see the data, and I'm reasonably sure that it's because we are not configured correctly with the demon rsyslog.   I find anywhere a file that contains data for the switch.

  I implemented the switch with an ip of VLAN1 to 10.10.10.20 10.10.10.1, with a default gateway, which is the IP address of the GNU server.  I have both logging and traps set to send to 10.10.10.20, and I connect to the buffer at level 6.  The switch can ping the server and vice versa. There are no firewalls or other devices.

  What should I do to the file rsyslog.conf?  and I need to create a subdirectory of logging?

  Please explain in detail, making it more useful things.

  Thank you.

   We are trying to set up Splunk, on a GNU server, running with rsyslog. Splunk doesn't see the data, and I'm reasonably sure it is because we are not set up correctly with the rsyslog daemon. I can't find a file anywhere that has the data from the switch. I set up the switch with a VLAN1 ip of 10.10.10.1, with a default-gateway of 10.10.10.20, which is the IP address of the GNU server. I have both logging and traps set to send to 10.10.10.20, and I'm logging to the buffer at level 6. The switch can ping the server, and vice versa; there is no firewall or other devices. What do I need to do to the rsyslog.conf file? and do I need to create a logging subdirectory? Please explain in detail, that would make things more helpful. Thanks.

  Hello

  Check out the link on syslog configuration on the server below.

  http://tecadmin.NET/Setup-centralized-logging-server-using-rsyslogd/#

  It could be that useful...

  -GI

  Rate if this can help...

• Installation of DRM on GNU / LINUX?

  Is it possible to install DRM on LINUX machine? Can you please provide some links that provide this information?

  Thank you

  Denis

  Hi Denis,.

  No, DRM can be installed on a Windows machine, whether they be physical or virtual. You can access the matrix of the platform supported on Oracle here site...

  Oracle Fusion Middleware taken supported system Configurations

  Thank you

  Jordan Wilcox

• Installing Oracle 11g on Oracle Linux 5.10

  Hi all

  When installing Oracle 11 g R2 in Oracle Linux 5.10 I get the error message: no such file or directory

  
  

  ---------------------------------------------------------------------------------

  [data info@localhost] $ ls

  doc installation RPM runInstaller stage www sshsetup response

  [data info@localhost] $./runinstaller.sh

  bash:. / runinstaller.sh: no such file or directory

  [data info@localhost] $

  -----------------------------------------------------------------------------

  Please suggest.

  What is the path of your runInstaller.sh? This path contains spaces? If so, to remove these spaces, and then try again.

  Also have you created (an oracle oracle owner) of the user? You must install with this user...

• Impossible to install oracle database 11g r2 under linux guest system

  Hi all
  
  I have a fedora 18 comments system installed in windows home 7 using virtualbox. I am installing the oracle 11.2.0.2 database in my comment fedoral system. The oracle database is on a shared folder. I tried these two commands to install the database:
  
  [root@localhost database] # chmod + x./install/.oui
  [root@localhost database] #. / runInstaller
  . / runInstaller: line 254: /media/sf_MyShare/Oracle/database/install/.oui: cannot execute binary file
  However, he failed miserably. I don't have any experience in the installation of oracle on linux database. Can anyboday give me a clue to help me solve this problem? Thank you very much in advance.
  
  Hong

  As I said

  For the error cannot execute binary file, check if you have downloaded the right version of the database for your architecture.

  ZLinux is port of LInux to the IBM servers, it is a bad download corresponding to your installation. ;)

• Easiest way to convert a computer virtual of GNU / linux

  I found a 27-step process for converting a linux server physical to a virtual machine using VMware Converter, but y at - it an easier way?

  If using P2V Converter for free, you can use the paid version of Double-Take or Platespin here tend to be less downtime so check their.  All solutions works fine just make sure you plan accordingly failover.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• OBIEE 11 g installation error Planner on GNU / Linux. Help, please!

  Hello
  
  I try to install OBIEE on a Linux machine. The repository was created using a Windows PC on a separate Oracle data base on another server.
  
  I have four of the five components OBI running, but I get this error message Scheduler.
  
  [2011 09-19 T 14: 47:54.000 + 00:00] [OracleBISchedulerComponent] [ERROR: 1] [] [] [ecid: 004fKlhR3PrEkJr5KJo2ye0006XX000000] [tid: dc253800] [68008] Scheduler error: []
  Current table: S_NQ_JOB.
  [nQSError: 17001] Oracle error code: 1017, message: ORA-01017: name of user and password invalid. connection refused
  the OCI call OCISessionBegin.
  Current table: S_NQ_JOB_PARAM.
  [nQSError: 17001] Oracle error code: 1017, message: ORA-01017: name of user and password invalid. connection refused
  the OCI call OCISessionBegin.
  Current table: S_NQ_INSTANCE.
  [nQSError: 17001] Oracle error code: 1017, message: ORA-01017: name of user and password invalid. connection refused
  the OCI call OCISessionBegin.
  Current table: S_NQ_ERR_MSG.
  [nQSError: 17001] Oracle error code: 1017, message: ORA-01017: name of user and password invalid. connection refused
  beak call OCISessionBegin... Errors encountered initializing database back-end of the Planner, check configuration of database.
  
  
  I checked the configuration and there is nothing wrong with that, more connectivity between the weblogic server and the Linux server and it checked. Also, I don't have any Enterprise edition, everything I do is at the level of the console under Linux.
  
  Help, please. I tried to sort this for a long time.
  
  Thank you.

  Becky,

  You mustn't do something extra to have 'EM running in the instance of 11 g OBI. Although it is a deployed JEE application, if your server Weblogic (WLS) is launched and up and running then your Console EM should also be running.

  You say you do all that command line. Then, start the Weblogic Server, then go to http://< your="" server="" name=""> : 7001/console

  So which rises, will

  http://: 7001/em

  That's your Console of Fusion EM and it should come as well.

  Don't mess with the XML file directly.

• Boot.Properties does not not in 11g SOA (Enterprise Linux) environment

  I need to get this to work because I want to auto-start the managed server (SOA).
  
  This is the problem...
  
  The Administration of server script ($MW_HOME/user_projects/domains/base_domain/startWebLogic.sh) works perfectly. I am not prompted for a user name or password.
  
  The installation gives me two (different) scripts of the same name - startManagedWebLogic.sh
  
  One of these scripts is $MW_HOME/wlserver_10.2/common/bin. I ignored it. The 2nd (the one I use) is of $MW_HOME/user_projects/domains/base_domain/bin
  
  The location of the file boot.properties (alone) is not clear to me. I placed two copies of the same file (two files - not a link) in $MW_HOME/user_projects/domains and $MW_HOME/user_projects/domains/base_domain
  
  Each file looks like this: -.
  
  # Generated by the Configuration Wizard...
  username = weblogic
  password = BIENVENUE1
  
  If I run startManagedWebLogic.sh leave a Terminal, I am prompted for the user name and password.
  
  I enter the user name (weblogic) and the password (eu1) and starts the server of the SOA.
  
  In unattended mode, the invocation is (actually) that: -.
  
  nohup startManagedWebLogic.sh soa_server1 > mwl.log 2 > & 1 &
  
  In this case, an exception is thrown (weblogic.security.SecurityInitializationException)
  
  It seems quite clear to me that the boot.properties file that is to be ignored because there is a configuration value that should not be used or, more likely, it's in the wrong place!

  When you start the managed server, it gives to the boot.properties in the root directory of the default server. Therefore, you should put your boot.properties file in the server root directory.

  Maybe it's in your case: $MW_HOME/user_projects/domains/base_domain/servers/ManagedServerName/directory.

  Alternatively, you can specify the location of the boot.properties file by using the following setting:
  -Dweblogic.system.BootIdentityFile = filename
  where filename is the full qualified path of an identity of valid boot file name.

  To specify this argument in startManagedWebLogic.sh script, add - Dweblogic.system.BootIdentityFile as the variable JAVA_OPTIONS value. For example:
  Set JAVA_OPTIONS=-Dweblogic.system.BootIdentityFile=C:\BEA\user_domains\mydomain\boot.properties

  Thank you
  Sandeep

• Use obiee 11g with SSO

  Hello
  
  With the help of obiee 11g in GNU / linux.
  I would like to know the steps to integrate with SSO.
  Any help?
  
  Thank you

  Hello
  Try link below

  http://sranka.WordPress.com/2008/06/06/enabling-SSO-authentication-for-OBIEE/
  http://Gellio.WordPress.com/2009/10/23/enabling-Oracle-single-sign-on-Osso-with-OBIEE/
  OBIEE, OAS, OID or SSO integration
  http://sranka.WordPress.com/2008/06/06/enabling-SSO-authentication-for-OBIEE/
  http://www.addidici.com/blog/?p=8
  http://download.Oracle.com/docs/CD/E12096_01/books/AnyDeploy/AnyDeploySSO3.html

  Thank you

  Deva

• Limitation of the recipient

  Hello
  I use 11g with GNU / linux.
  When I schedule a report, I chose 20 recipients of users. (20 critics have the e-mail account).
  And I added manually the Mail 4 id
  
  the recipient of the message so total = 24
  
  Could you please let me know what is the limitation of the user recipient selection and manual mail ID users.
  
  Thank you
  Gram

  Hello

  It is about 5,000 users by default. (it is based on the Configuration of the LDAP server, you can also increase the size limit of the AD or set up several groups)

  Thank you
  Deva