11gR2.3 JDev/ADF Faces: the Shell of the user interface, how to disable scrollbars of the logo

Similar Questions

• Update Application of Adf faces the new Version

  Hello
  
  I have a running adf faces application with jdeveloper (11.1.1.1.0), I want to update
  my currently adf application to the new version of adf faces (11.1.1.3.0).
  
  How can I update the application?
  
  Jar files that I could spend? or some works that runs the application in the new version of jdeveloper?
  
  Thank you.

  As far as I know, you cannot run JDev 11.1.1.3 ADF applications on WLS 10.3.1 - you must upgrade to WebLogic 10.3.3 first.

  John

• ADF faces: the challenge of creating custom components

  Hi all
  
  My name is Juan Manuel Tamayo, and I start a project in which we will use ADF 11 g as part of our development, unless we find significant reasons not to do so. I don't have much experience with JSF or ADF, so please accept my apology for any obvious question.
  
  I would like to know your opinion about the declarative elements in ADF Faces. Are they easy to use? are they flexible enough to build all the components required for a large application? In case the declarative elements are not sufficient, what other options do I have for building new, complex visual components?
  
  I sincerely appreciate your help.
  
  Kind regards
  
  Juan Manuel Tamayo
  
  Published by: juanmtamayo on January 19, 2009 20:48

  Juan,

  If the component can be built out of existing components, so if it's a component of composite, then declarative components is a good and reusable approach. If you can't find what you are looking for your next step would be the Internet to see if you find a component JSF 1.2 compatible UI that you need and that co-exists with the set of components in ADF Faces. In any last resort, you can always write your own custom JSF component.

  Frank

• Looking for 11 JDev ADF Faces example with several filters

  I am looking for an Internet example ADF Faces application that has the following text:
  
  Several combo boxes (LOVs) - some who invites just for a date range. These could as well be cascade.
  
  Finally a run button that runs a query based on the values of the drop-down list boxes in bind variable, then displays the results under the filters in a table.
  
  It sounds easy enough, but I have not found an example of this. Can someone point me in the right direction? I tried to create a quick example on the EMP table with a combobox to date that I could use to date of hire. I can't get this to work with links to view the results of the table well. I don't know how the code for the event to run the query and create the table.
  
  Thank you, Ken

  Hello

  even if we would work 24 hours a day 7 days a week. At the end of the year we would miss still some usecases as examples. How to do what you want

  -Drag the table
  -Drag the execute with params as a parameter
  -remove the attribute hiring date
  -Drag the variable of the hiring date linking (I think I would use a component date.) MinValue instead of a selectBox date). However, do not hesitate to choose a selectOneChoice component. In the link dialog box, create a reference to a VO list to fill the selectOneChoice (must be located a VO you query the target)
  -Similar to all others

  By pressing the button send the form parameter will execute the query

  Frank

• Stress Test ADF Faces with JMeter, simulate multi user - unique number doc

  Hi all
  I was able to configure JMeter to test ADF faces 10g application, now is the time to define the load and the scenario.
  When reading JMeter docs, I'm curious if others has been doing so successfully and can share it. (at least Mr. Chris Muir...?  :)
  
  I have two questions:
  
  (1) the page I want to test is a Page of entry of order with master - detail (form - editable table).
  I f I just create a group of JMeter threads with Thread number = 50.
  These '50 users' insert exactly the SAME data, even if I have a single Unique constraint on a field "Order-Ref" (which is not automatically generated, but entered by the user).
  Is it possible to use a meter on JMeter, so this "Order-Ref" field will be filled with 'REF-1', ' REF - 2 "etc...?". (so that I can survive the unique constraint)
  
  (2) have you tried JMeter to insert data of editable table ADF?
  
  Thank you very much
  xtanto

  Search the concept of function in JMeter, more precisely the function of the counter:
  http://Jakarta.Apache.org/JMeter/UserManual/functions.html#__counter

  CM.

• In the user interface, how can I property "Sequence Call Trace Setting" the stage of 'SequenceCall '?

  Hi all!

  I am writing a user interface. I want know step "SequenceCall" is tracingEnable or not. It is said that "use the Step.Module property to get a reference to a SequenceCallModule object. I can't well it. I can get a reference using "TS adapter API. But how he dose associated with the stage of 'SequenceCall '.

  Thank you!

  Hello

  You can do by using the node of given Variant to in LabVIEW.

  Please see the newsletter - get a different for TestStand objects Interface topic in the manual using Labview and LabWindows/CVI with TestStand for more information and an example.

  You can get a copy of this manual from this link - http://digital.ni.com/manuals.nsf/websearch/B8398AF8729D906F862577B4004FF10C if necessary.

  Concerning

  Anand jegou

  National Instruments

• How toggle and show/hide in the ADF faces components

  Hello
  
  In my application, I need to toggle and show/hide in ADF faces components based on a user manipulates some components. I need to I am a newbie to ADF, all ideas are appreciated.
  
  Kind regards
  Surya

  For use to hide/show the Visible property and toggle use ReadOnly property.
  Set them to some EL Expression as #{ == ? : }
  Also set the PartialTrigger on this attribute pointing to the parent attribute

  Don't forget to fix biased/AutoSubmit submit = true to the parent component.

  Amit

• including the extension in jdeveloper with ADF Faces?

  Hello

  We have an application with ADF Faces components that must be migrated to OracleAS weblogic 11 g Server (10.3.5).

  We strive to upgrade the application under jdeveloper 11.1.1.5.0.  I have 3 questions.

  1. which the ADF jdeveloper extension should download us for this purpose?

  We already seem to have the extensions 'Fusion Web Applications (ADF)' and ' Applications Java Desktop (ADF) "."

  2. during the upgrade, we were given an option to upgrade the ADF Faces in Trinidad, when this option has been chosen, we got a "unexpected mistake."

  is it necessary to go to TRINIDAD to be able to deploy successfully on weblogic 10.3.5? If Yes, is the extension for Jdeveloper MAVEN?

  3. in weblogic server, I understand, we need the extension JRF to support the length of the ADF, is there anything else that we need on weblogic server that the adf works?

  Thank you in advance.

  If the origins of your application of jdev 10g and runs on the OAS, you can migrate to Trinidad. No extension is required for this as the required libraries are already there. Maven is useless and will not work for 11.1.1.5.0. First version with the full support of MAVEN is 12 c.

  If you get an unexpected error during the migration from the old app to 11 g, you should try to find out

  (1) projects that is causing the error

  (2) file that is causing the error

  and work from there. There are some configurations that cannot be migrated (check the release notes), however they should not lead to unexpected errors. However, check the release notes.

  If you don't find anything and cannot pass through the error, you must open a SR with support.oracle.com.

  Next question is why migrate to 11.1.1.5.0 which is already obsolete.

  Timo

• How to clear the selection on an ADF faces table?

  I thought I'd call setSelectedRowKeys (null) gives the desired result. However it is not. Can you think of a reason why it would not clear the selection? What should I do?
  
  Here's the specific scenario:
  
  I have a two ADF faces table tell A and B with a column each and both of them have simple lines and their rowSelection property is set to "single". Now the requirement is when a line is selected from A, it must clear all selections of B and vice versa. So I registered selectionListeners on the tables and the code that is running inside this method does the following for the table has not been selected :
  
  tablenNotSelected.setSelectedRowKeys (null);
  
  lets say, I click on a first line, then on a row of B. So far so good. So if I click on the A, the control won't to the SelectionListener method. I think that SelectionEvent isn't getting fired no doubt because the previous selection has not been erased.
  
  JDev version I use is JDEVADF_MAIN_GENERIC_121113.1351.6521
  
  What I'm missing here?
  
  Published by: 981525 on January 23, 2013 08:20

  try to add addPartialTarget (table) after you turn off the selection.

• Cannot locate the document in ADF Faces base tag

  I found a good tag to ADF Faces (10g) basis, using this URL, http://www.oracle.com/technology/products/jdev/htdocs/partners/a
  ddins/exchange/jsf/doc/tagdoc/core/imageIndex.html. This reference contains images for each component of the tag. but somehow the URL no longer works. Someone can tell me why this URL does not work and how/where can I download the same refrence on local computer? That's 10g.
  
  Thank you
  
  Jade

  I you download jdev 10 you can find the tagdoc to:

  jdevstudiobase10135\jdev\doc\ohj\adffacesguide.jar

  Unzip the and you'll have several files, one of them is "tagdoc".
  Inside, you have a folder 'base' and 'html '. In the two index.html has the information you want.

• How to develop an application using ADF Faces components main in JDev 11 g?

  Hello
  I just started to work with JDEV11g. Now, I have a question here.
  
  By default when we tried to create any Application in JDev 11 g libraries of tags are still showing only ADF Faces rich client components (11g). I want to use the ADF Faces Components (10.1.3) Core in the same application with addition to ADF Faces Rich Client components.
  
  How to develop a sample with ADF Faces Core components (10.1.3) application. What are the steps to follow in JDev 11 g?
  
  Please help me.
  
  Thank you
  -Afif

  Yes.

  Trinidad is all correct and documented components to use. They are almost exactly the same as the ADF Faces 10.1.3.x ones.

  John

• How to conditionally bind the declarative component custom ADF ADF Faces

  Hi gurus,

  I created the custom declarative component called "Historical Record", following the article of Frank Nimphus Oracle ADF Code corner: How to bind custom declarative ADF Faces components and it works perfectly find.

  But I want to strengthen further to make more generic, as in Oracle EBS we can go to all the blocks and choose Tools-> history of the record and it shows WHO columns to the currently selected record.

  The intention is conditionally bind the attributes of the component with columns of WHO bodies VO.

  The scenario is:

  * all tables have Created_Date, Modified_Date for columns of the WHO.

  * the page containing the 2 instances of VO with different source (for example:-> emp dept)

  * whenever I have navigate dept records it should display columns WHO selected dept and the same thing then to move through the records of the emp.

  Kind regards

  Ferrere

  Well as I said, you shouldn't try to rebuild the Oracle Forms technology-specific behavior in some other technologies such as ADF (because it is not usually possible).

  It is probably best to have a separate button for each shape (square to a coherent position on all pages - as some form, toolbar header...)

  If you want to rebuild the behavior of forms, then you can use the combination of af: clientListener / af:serverListener to set a flag (as the name iterator) see scope that can be used by your 'global' button to retrieve the correct data. Therefore, add af:clientListener to each component entry...

  Dario

• Where should questions about the JDEV/ADF positions?

  Hello

  Where should questions about the JDEV/ADF positions?

  JDeveloper and ADF or

  JDeveloper and ADF?

  I found there may be some different advantageous:

  https://forums.Oracle.com/message/11109674?TSTART=0#11109674

  Thank you.

  Well, the other forum you mentioned is the Korean equivalent of the English forum.

  You have already discovered, it is not controlled to many users. I didn't know that it exists at all.

  In general it is to you where you ask your questions. All for one here are driven by the community and some employees of the Oracle, you cannot wait has answered all your questions. If you really need to answer you go through paid support.

  A tip for getting help is to provide a well-defined use cases, information relating to your environment and documented code showing what you have already tried.

  Timo

• ADF Faces 11, add where clause to the detail view in the master/detail relationship

  Hello
  
  I have two display objects only read connected by a link in a relationship master detail.
  
  They are displayed in a treetable in the form.
  
  I have a method on the java object impl view master class, I use to add custom where claused based on entries different user and then run the query.
  
  Works well, master and detail is interview properly.
  
  But I also want to further filter the detail view (view from destination in the display link). However, as soon as I add whereclause in the detail view against the master
  relationship of detail seems to have disappeared and are no detail record. I also tried to add a view criteria but with the same result.
  
  Your comments will be appreciated.
  
  ADF FACES 11g release 1.
  
  
  Jan

  You can get the ViewLinkAccessor, then the ViewObject and try to apply the ViewCriteria, followed by executeQuery... what you are already doing.
  Better to paste your code here...

• Question about the mix of Trinidad component with ADF Faces

  Dear all,
  
  I have a requirement for complex layout that I can't do with just ADF Faces component.
  I found this blog nice wfrom Jobinesh http://jobinesh.blogspot.com/2010/11/layout-tips-organizing-page-content.html
  and I quickly realize that this will solve my problem.
  
  Please note that components of Trinidad has not all client components peer as we have for the ADF Faces. You may need to be measured while choosing this guy
  
  I'm just concerned about this line. I can't really understand what it means and how it will impact my programming of the ADF.
  
  Thank you

  Neliel,

  Which, in my view, that Jobinesh says it's that you will not be able to use the HTML elements of the Trinity as targets for partial triggers. As far as I know, using HTML of Trinidad (trh :) components with ADF is OK, but using 'clean' Trinidad (tr :), you can have problems.

  John