12.2.0 - 12.2.3 vision Question upgrade

Similar Questions

• Question upgrade L50-A-19N disk HARD satellite

  Hello

  I want to upgrade the standard HDD HGST to a faster SSHD Seagate, and the problem is that in this model L50-A-19N without HARD drive cover, at the bottom of the laptop everything must be removed as in this link: [video | http://www.youtube.com/watch?v=IG0lW7t92bI]

  My question is can I put the disc by myself, and if not what can I do to replace the disc without losing the warranty. I have read the manual for this model and there is nothing of HDD upgrades here.

  Kind regards.

  > My question is can I put the disc by myself, and if not what can I do to replace the disc without losing the warranty.

  No, I don't think that the HARD drive is the user extensible because _in this boite_ the laptop computer full cover must be removed to replace the HARD drive.

  It looks like the ROM modules can be updated by the user of the laptop. Other parts must be replaced by an approved engineer to keep the warranty valid.

• Question upgrade memory for HPE h8 - 1360t

  A month ago, I bought an I7-3770 HPE h8 - 1360 t which had 8 G of memory installed.

  The product is described here:

  http://www.microcenter.com/single_product_results.aspx?SKU=067371

  It has Windows 7 professional 64-Bit.   Up here, no change in hardware or software.

  My question is, what is the maximum memory that can be installed.

  According to the page specification of motherboard, 'Supports 1 GB, 2 GB, 4 GB and 8 GB DIMM' - 'supports up to 32 GB on 64 bit systems.

  http://support.HP.com/us-en/document/c03132942

  But according to the upgrade and maintenance Guide, "16.0 GB" memory installable using 4 GB Modules

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&DLC=en&docName=c03132942&LC=en&product=52616...

  The models listed in the upgrade and maintenance guide is not the exact model, but it seems that the same thing.   And of course the motherboard, IPMMB-FM, looks like the correct motherboard.

  So who is the maximum memory that can take this machine?  If it is only 16 GB, then the motherboard specification page is incorrect?  And if the motherboard page is correct and that the machine however is limited to 16 GB, which is to limit the maximum memory, if this is not the motherboard?

  Hello

  IPMMB-FM (Formosa) in your PC motherboard supports 32 GB.

  I suspect that the documentation has been published before HP started offering 8 GB DIMM desktop PC.

  The part of the similar model PC using the same motherboard can be configured up to 32 GB with 8 GB DIMMs.

• Question upgrade Ram M2N68 - narrated (5)

  I hope someone can help me here;  in any case, to start with, the motherboard M2N68 - THE has a Phenom II X 4 945 cpu and 4 GB PNY pc2-6400 optimima running at 1.8 volts on a Win 7 64 bit OS.  I want to do is increase the Ram up to 8 GB of ram (2 x 4 GB) of the Patroit. This would be possible on this type of advice?  If this is not the case, what is the max voltage that the motherboard can handle because PNY has also 4 GB of ram with CAS4 XLR8 @ 2.0 v I had to get incase the Patroit cannot be used.

  Thanks

  Hi Dave;

  Thanks for responding to my question. I was hoping that these modules DIMM XLR8 would have worked at least.

  Thanks again.

• Quick question upgrade from APEX

  Hello everyone. I have a question. If I am currently using Oracle 10 g and Application Express version 2.1.0.00.39, can I put my APEX to a newer version without having to upgrade to Oracle 10 g level? Thanks for your help.
  
  Aqua

  Specifically, you need to 10.2.0.4
  http://docs.Oracle.com/CD/E37097_01/doc/install.42/e35123/pre_require.htm#i1009513

• practical question upgrade

  What the patch # put 12.1.1 later? and want practical 11i install and upgrade to R12, not seeing 11i binaris on delivery? any suggestion?

  DBA2011 wrote:
  What the patch # put 12.1.1 later?

  Please search the forum before posting similar questions - https://forums.oracle.com/forums/search.jspa?threadID=&q=Upgrade+11i+to+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001

  and want practical 11i install and upgrade to R12, not seeing 11i binaris on delivery? any suggestion?

  It is no longer available for download, and you must log an SR and ask the Support of Oracle to send the Media Pack.

  Thank you
  Hussein

• Install Web Premium CS4 Student Edition on laptop after the Question upgrade Windows 7

  I hope that this has not been asked before, but my question is this: I want to upgrade my laptop Windows XP to Windows 7.  But I've heard that all programs be uninstalled after installing Windows 7 on a computer running Windows XP.  I have to reinstall all the programs again to use CS4 Web Premium.  But my student edition says that I can only install the program on two computers.  Does that mean I can install the program twice, or can I still install on the same laptop after changing the operating system (I installed CS4 on both computers, my computer, laptop and desktop)?  I want to continue using CS4 Web Premium on my laptop but I'm worried I won't be able to install it because I installed CS4 on my laptop and desktop (two installed already).  I would like to know if I can install on the same laptop after upgrading to Windows 7.  Thanks in advance for the help.

  WebMacro123

  The question isn't installation... it's activation. Disable the software first. (Help > deactivate from any application).

  Back up all your data, preferences, etc. because, as you note, it will be a clean install of Windows. Know that it is only cool method to upgrade a Windows installation. NEVER don't upgrade a Windows in place (or, IMO, Mac OSX).

  Bob

• New Win 7 64 bit PC delivered. Questions: upgrade to CS5 to CS4.

  Just got my new Win 7 Pro 64 bit PC. My old PC which is still up and running is a XP Pro 32 bit OS and Photoshop CS4 installed. I will be upgrading the 'new Win 7 64 - bit PC' for CS5 64-bit.

  It is true that the PS can be installed and operational on 2 PC? Can I have PS CS4 running on the old 32 bit and be able to install PS CS4 (64 bit) on the new PC? I know that I will be forced to install CS4 on the new PC to get the CS5 upgrade to install. (Even if the CS5 upgrade is a complete installation, you should check the installation of CS4)

  I have seen different answers to the question above and would like to know the procedure that I have to take to get PS CS5 64-bit installed on my new Win 7 PC. CS4 would probably be uninstalled on the new PC after checking the CS5 works ok.

  Should not have an impact on the issue, but the new statistics system are:

  Windows 7 Professional 64 bit

  ASUS P6X58D Premium Mobo

  I7-980 X Extreme

  12 GB OF RAM

  GeForce GTX 260 Superclocked

  Thanks in advance for any information you can provide!

  Check your license agreement (I think that it is also available @Adobe)

  As far as I know, you can install on 2 computers... the idea being an office and cell phones for travel

  You don't usually need installation to upgrade... everything you need is your old Serial # to enter when asked

• CC 7100 cmt: questions upgrade ram cmt dc 7100 (please help)

  Hey all,.
  There is history... or you can just go to the section "cut to the Chase" to the bottom of the post

  The long story...
  my name is chris, and I'm trying to help a 14-year-old son, friends learn a lil more on his old pc.

  his pc has a hand and is obviously outdated, I got a bunch of old carcasses of office and let him rumage anything that would contribute to his pc. We found a total of 3 GB of ram ddr400mhz which is just below its limit of 4 GB machines.

  so I thought everything would go smoothly, it is certainly not my first ram upgrade, having built many of the old desktop computers it was inflict through, I consider myself pretty well informed on the pc and have renovated a lot of pc, same Freelancer my skills of mechanics and tokens for a lil extra cash on the side I have dealt with many a problem, repair and upgrade, since I took my first windows machine in 2000, before that I started with a commodore 64 and eventually got an apple iic when I was about 10 years old... anyway, what im getting here, is I USED to know my s#@t, but for some reason any It's evading me and google isn't offering anything on the subject.

  We planned on him to update to sp3 after have modernized their equipment as much as we can, while at the same time educate him as much as I could about how the computer worked, how to open and how to treat the components inside, it was the first time, he had never looked inside his machine or any machine besides...

  However, because of delays and the issue with the ram does not, I eventually send him home with the same stock set up, he brought to me.

  Cut to the Chase

  The problem here is that for some reason when I install 1, 2 or 3 the cards of ram 1 GB the machine do not post and triggers a series of beeps system, so obviously something isn't jiving, and I can't put my finger on it.
  I can use 1,2,3 or all 4 of his stock [256 MB ddr 400 mhz] ram cards and it will display and start with change messages memory clear system, however, when you use less than four of its ram slots, a message is launched upward during post, stating something to the effect of all the slots must contain the same amount of ram

  We are working on PC is a:
  HP DC 7100 CMT
  Windows XP SP2

  current installed RAM is [256 MB ddr 400 mhz] x 4 = a total of 1 GB

  tried to upgrade RAM parts:
  Ballistix [1 GB ddr 400 mhz] x 2 = a 2 GB total

  more

  Memory Dell [1 gb ddr] (mhz are not)

  I thought it was probably a bios thing and was about to investigate, but we ran out of time, now I'm tender hand to this community in the hope that someone here can indicate what it is I'm obviosly dominant, I really want to get his machine is upgraded because it is expessing a lot of interest in Unity3D , and scripts, ANDS I'd like see hiw cultivate these skills and I can't buy a machine, and he cannot afford a new machine, so the upgrade of its rigging with these old quarters would be the most ideal situations for him, if we cannot find out we will simply create a new rig out of my 'old' , but the 3.0 ghz core dou in his dc 7100 cmt processor is probably better than any of the alternatives in my attic... so yes this is my dilemma and I hope that some here is kind enough to point me in the right direction

  Thank you and best regards,
  Chris

  Hello:

  You must have the total amount of memory in slots 1 and 3 are the same, and the same quantity in slots 2 and 4.

  The PC will not work if you put 1 GB in slot 1, 1 GB in slot 2 and 1 GB in the Groove 3 because you're short 1 GB in the empty slot 4 and just short of 1 GB in slot 4 = 5 beeps.

  Then... If you do not have 4 x 1 GB then use 1 GB in slots 1 and 3 and 256 MB in slots 2 and 4.

  See the table below on page 16 memory configuration.

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287187

• Difficult question - upgrade of the motherboard ASUS P5LP processors - THE

  I have a HP desktop with the motherboard ASUS P5LP - THE. I would like to ask a series of Core 2 Duo E7500 processor in this computer, however the features HP say max supported is a 6xxx series. The E7500 will work with this motherboard? E6xxx processors are becoming hard to find. Thank you!

  Hi, based on yourproduct m7480n pag, actually have the motherboard ofEmer .  :

  Just to be sure, you can have a quick came on the back of the machine.  Emery has a great to come on back pink parallel port, whileAli Seid has a blue VGA port instead

  There is aBIOS updateavailable for the m7480n, if you still do not have xp, but he said nothing about having updated the code micro for newer processors.  Looks like are your options of processor for the Emery

  • Pentium D 800 series basis until 3.2 GH Smithfield

• Quick question upgrade RAM R6500

  Hello. I know that the E6500 is listed as 8 gb max. is it because of the limits of the OS or the chipset or another? I already have 8 GB and wanted to go to 16 GB, if I could. I am running Windows 7 64 bit as OS. Thank you.

  Jay

  Hi Jay,.

  64-bit Windows 7 operating system supports more than 8 GB, but the Intel Chipset GM45 Express in the Latitude E6500 supports a maximum of 8 GB of RAM. Therefore, the memory cannot be upgraded to 16 GB.

  Please let me know if you need further information.

• Q5 whaen question upgraded to os 10.2.1 suspended blackBerry camera

  HI1 feb on28th what version 10.2.1 I upgraded my Blackberry 10 on it after upgrading my camera is suspended and no photos I restart holding my camera. but it doesn't take no change camera does not work. and there we more I m having model q5 blackberry only. SQR100-3 nfc does not work it shows that NFC is not supported by your device. Help me im in trouble.

  If you change to a different location to save does help?

• Question: Upgrade of RAM for my HP Pavilion Media Center m7480n

  First of all, I want to say hello to everyone on the HP Forum community and thank everyone for their help and support since his arrival at the Forum.

  I have a HP Pavilion Desktop Media Center m7480n:

  Card upgrade memory:

  Hello

  That your PC has two free memory slots, and you bought ram DDR2 533 MHz 2 GB (1 GB x 2) memory. Compatibility should not be a problem. You have the right type and the amount of RAM in your PC. Once installed, it will take the total of your system's RAM to 4 GB. However, the caveat is that 32-bit operating systems can use only 3.25 GB of the 4 GB installed. This is a limitation of the memory address. Most of the personal computer world continues to use the 32-bit Windows XP/Vista or 7 versions.

  Upgrade from 2 GB to 4 GB would be beneficial for people who are heavy multitasking and running many background applications. In the field of heavy multitasking, the processor (CPU) begins plays a more important role, as an increase in the number of cores (e.g. upgrade of duals to four hearts) will prove beneficial, that simply increase RAM. I think that 2 GB of RAM should be sufficient for basic multitasking averages. Even most PC games benefit much from 2 GB to 4 GB.

  However with the RAM being if pricey as it is these days, it never hurts the Pocket to upgrade. As you have already purchased the RAM, go and plug it by all means, you should see a marginal improvement in performance. You can check this document before you install the memory modules: upgrading memory (RAM)

  Hope this has been helpful.

  See you soon!

• E.M.P. 11122 to 11123 question upgrade with configtool

  Scenario:

  E.M.P. 11.1.2.2 in a distributed env (Linux & Windows)

  Linux - Foundation, planning, Essbase, EPMA

  Windows-server of the Dimension, FDM

  Upgrade, we follow http://docs.oracle.com/cd/E40248_01/epm.1112/epm_install/frameset.htm?ch10s05.html

  We strive to upgrade (apply the patch of maintenance) for EMP 11.1.2.3. At ran installTool on Linux and Windows. There are no errors.

  We are at the stage of the services of the Foundation using configtool configuration. At the launch of the configtool under Linux, we get the error when checking for JAR files below. ($EPM_ORACLE_HOME/EPMSystem11R1/common/config/11.1.2.0/configtool.sh)

  Error: Clear POTS check failed with the message "some pots referenced do not exist" - I can't give the screen shot here.

  Something similar to the missing .jar files when lunching configtool (Essbase 11.1.2.3 on Oracle Linux 5 64-bit)

  ()https:///community.oracle.com/thread/2549620( )

  Comments:

  In some cases the directories in which he seeks do not exist, in some cases the jar files aren't there.

  But on the Windows machine, the configtool.cmd does not complain even if the files/folders are not there. It was indeed.

  Cannot see all the logs get updated with the error.

  In case of problems so far:

  • Tried to reinstall the stage version
  • Download s/w and re-created on stage and reinstalled version
  • Control access to the inventory of the oracle. Inventory and MW_HOME are the property of oracle: oinstall
  • Can access the inventory and see that EMP 11.1.2.3 is installed. Tried to access the inventory of EPMSystem11R1/Yes and two other locations
  • Tried to run configtool.sh epmsystem1/bin, same error
  • No missing assembly

  No luck.

  Please tell us how to solve this problem and move forward. Is it possible to launch configtool without verification pre-reqs?

  Cannot continue with the config of the upg. Please notify. Appreciate your help.
  

  The problem is finally solved. During the installation of EMP 11123 it has not copied the below 2 folders correctly.

  $MW_HOME/modules/org.apache.ant_1.7.1

  $MW_HOME/modules/net.sf.antcontrib_1.1.0.0_1-0b2

  Some of the missing .jar files. Found this by comparing directories in another instance. After copying the 2 files to another server, launched perfectly configtool.

  Thanks for all the help.

• vCenter Question Upgrade (requirement of http and https ports)

  Hello

  In vSphere Upgrade Guide, the documentation clearly indicates "vCenter Server 4.0 uses TCP/IP Ports 80 and 443, you _cannot _run vCenter Server on the same computer as a webserver using these ports, because this causes conflicts of port.

  Now in the vCenter has always allowed me to change the ports by default during the installation, not only do this to avoid conflicts?  My current virtualcenter server using ports 80 and 443 for a bunch of websites and I can't move.  I don't have another server that has these free ports.

  If any of you have changed the default http and https ports during installation (I even do that)?  Problems?  All comments in general?  VCenter even use these ports for?  I searched but could not find a definitive answer.

  This is a very critical level and I'd rather not start it until I know exactly what to expect.

  Thank you!!

  Well the port 80 and 443 are generally webservices 80 http 443 https, it is no different with virtual center, they are used for web access to manage virtual machines etc.

  and yes I have changed these on a server vc, when access to the content of the web services via the browser enough ":" at the end of the address

  change change will require virtual center of service needs to be restarted