LaserJet cp1025 colour

Similar Questions

• A continuous green flashing button loan after removing the impression that job - Laserjet CP1025 colour

  I can't get the blinking green ready button to stop the flashing of a Laserjet CP1025 colour. Iniatially I thought it was a fault in the queue and after much effort, I was able to delete a print job that is persistent. I uninstalled the drivers printer and re - install, but it still wouldn't print. I have unplugged the printer from the computer and turned on with the only power to come in it, and even the little green light flashes at me - what can I do?

  It seems that this print job that failed got stuck in the printer memory.  The only thing you can do is a hard reset to clear the memory of the printer work.

  To do a hard reset:

  1. Make sure that the printer is turned on.
  2. Pull out the power cord from the printer.
  3. Pull out the power cord from the wall.
  4. Wait 30 seconds.
  5. Plug everything back in and turn on the printer.

  If this does not work, you will need to replace the printer.

• LaserJet cp1025: laserjet cp1025 colour printing error

  Hello

  I could not print. The ready button keep flashing, but nothing happened. Also, I tried to install the firmware, but failed (as I thought could solve the problem). Help, please.

  Hi bapaknyaanak2,

  Have you been able to print the test material?

  What were the results when you ran the Print and Scan Doctor? (he print test page, error messages)

  You experience this problem with all applications? (you mentioned that you can sometimes print 1 of 5 pages)

  If the material of that test prints, it could be software or hardware related. (USB cable or port on computer do not receive enough power)

  Is it a laptop or desktop?

  The USB cable must be connected directly to the computer and should not be more then 6 feet. Try a different USB port on the computer. Try another USB cable.

  If it is a laptop, check the power on the computer to see if that is causing the problem. Go to Device Manager, under Bus for each made USB root hub controllers right click and left click on properties, for the management of the power supply remove the check box for "allow the computer to turn off this device to save energy. It allows the computer to restrict or cut off the power for this unit. How to make in the Windows Device Manager?

  If you're still having problems, I would say to uninstall and reinstall the printer software to see if it's related software.

  Thank you.

• LaserJet CP1025 Color - PC system tray stops working whenever I have send a doc to the printer.

  LaserJet CP1025 colour connected via direct USB for WINDOWS Vista 32-bit. I have the latest drivers, applications, and firmware for the printer, but the system tray stops working whenever I print a document. I tried this on Windows 7 via USB and get the same problem. Why does this happen?  I have another printer connected to the PC and I deleted all other HP drivers so that they don't interfere with the laserjet.

  Thanks for the update. I also found another thread where a lot of troubleshooting has been done, but the problem persists or is fixed only to reproduce:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/LaserJet-CP1025nw-HP-system-tray-has-stopped-working/TD-p/1226639

  I noticed it happens on XP, Vista and 7. I recommend updating the firmware first (if you have not done so) by going here:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86491-5&CC=US&DLC=en&LC=en&os=4062&Product=4052957&sw_lang=

  In addition, in the printer preferences, disable bidirectional printing, which is located by clicking right on pinter > choose Print Properties > click on the ports tab > uncheck bidirectional printing.

  Let me know if either of those who help.

• Type of USB cable for Laserjet CP1025 Color

  I just bought a printer Laserjet CP1025 colour of HP uk online store and I took it from the box.

  NOWHERE, I find a USB connection cable.

  How can I plug it into my laptop to make it work without the connection cable?

  What is the cable that is supposed to be?

  Can someone give me the exact type or a link to order the HP, or on amazon uk store?

  Thanks in advance!

  Hello

  To reduce costs, many printers have no USB cables inside their boxes. I think the USB cables are in boxes of printers for the only region in AP. You need a cable that is similar to:

  

  The rounded end is for your printer and the flat end is for your computer.

  Kind regards.

• LaserJet CP1025: My LaserJet CP1025 can imitate colors correctly

  Greetings,

  I will write directly to the question. When I try to print my great that contains mainly dark colors and purlpes, my impression of this picture does not look good, the nuances of purlple are blue and simpli does not work with my graphics project I've done.

  I tried to print is trought photoshop and word, but the result is the same, I tried to fix it simply with the options available, but it did not help as well.

  Please help me, yours faithfully customer

  Hi @EpiclyToasted,

  Welcome to the Forums of HP Support!

  I see that your HP LaserJet Pro CP1025 colour printer is not printing colors correctly. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you have already done some troubleshooting. I do not know what measures you have completed so far, but I recommend the steps in this guide below.

  You use Genuine HP Toner?
  What are the levels of toner?

  What is the guide that you used to try to resolve the problem, HP LaserJet Pro CP1025 and CP1025nw - color printers Print quality problems?

  If you followed the steps in this guide and still impossible to print in color, you have certainly one or more faulty cartridge.

  If you have a faulty cartridge, it might be under warranty. To check the warranty on your ink supplies, go to hp.com/go/learnaboutsupplies, select your country/region, and then review the information of limited warranty for your supplies.

  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Color LaserJet CP1025: printer prints one page and then stops

  I've had my printer for several years. Now, when I try to print a multiple-page file, it prints a page and stops. I need to print each page individually. It is never used to do this.

  Hey @Egolioxon,

  Thanks for posting in the Forum from HP Support.

  I understand that you have a problem of partial print job when you use your HP LaserJet Pro CP1025 colour printer.  I would like to help.

  First of all, I recommend to run you HP and Scan Doctor for Windows printing.  You can click here to install it.  This utility can find and fix what is sick of your configuration.  In addition, if this approach does not help, I suggest to work your way through the steps listed in this article from HP.  She is expected to rule out possible problems of print queue.  Finally, it won't hurt to empty your temporary files, as explained below:

  Clear the Temp folder:

  1. Open your Start menu and in the box "search programs and files", type %temp% , and then press enter.
  2. When the Temp folder opens, select Ctrl + A at the same time on your keyboard
  3. Once everything is highlighted in the Temp folder select "delete" on your keyboard to delete the files in the Temp folder. No files and folders on your computer will be deleted. This only deletes temporary files. If a file is always be used by a program on your computer, you'll be up the pop to 'jump' the item.
  4. Once the temporary files are deleted to close the window
  5. On your desktop, right click on the recycling bin and select empty recycling bin

  Please let me know the result of your troubleshooting by responding to this post.  If I helped you to solve the problem, feel free to give me a virtual h.o.t. by clicking the "Thumbs Up" icon below and by clicking to accept this solution.

  Thanks again for your post and have a great day!

• LaserJet CP1025: laserjet cp1025 and Mint 18

  I have a laserjet cp1025 and have run it on different versions of Linux mint and never had a problem to install hplip site. However, I upgraded to Mint 18 and when I try to install I get an error message saying that Mint 18 is not supported.

  Any ideasof how this be corrected?

  Hello

  Linux Mint 18 is not listed as supported in fact:

  http://hplipopensource.com/hplip-Web/models/LaserJet/hp_laserjet_cp_1025nw.html

  You can follow the steps below to perform a manual installation as the operating system is not yet supported by the installer:

  http://hplipopensource.com/hplip-Web/install/manual/distros/linuxmint.html

  Kind regards

  Shlomi

• Windows 8 for LaserJet CP1025

  Do we know when the updated for the LaserJet CP1025 drivers will be available for Windows 8?  Something more specific than "later this year.  I have the invitations printed for a living and get my printer works as soon as POSSIBLE with my new computer!  Is there a solution for this?

  Hello world

  Until the Win 8 drivers get released you can download the complete driver of Win 7 features from the link below which will allow you to use the full functionality of this printer. Remember to update the firmware to the latest version using a Win 7 computer before attempting to install the printer on 8 to win.

  HP LaserJet Firmware Update Utility

  Note: When you update the firmware, you will want to have the printer connected to the computer via a USB cable to make sure that you have a secured to complete the update of the firmware.

  Driver and software of HP LaserJet Full Feature

• Cp1025nw Color LaserJet: windows10 and laserjet cp1025 does not print color

  Hi cannot get my lasjet cp1025 colour print. Failed to send a test page for pc / any suggestions?

  Welcome @Doelpen,

  Thanks to their participation in Forums of HP! I see by your post that you cannot print from the computer. I will definitely do my best to help you.

  Try to print a self-test on the printer hardware to see if it's a hardware or software problem: printing a Configuration Page. Select the method: print a Configuration page of the control panel of the printer. I would like to know if it printed.

  Download and run Print and Scan doctor. It will diagnose the problem and could solve it automatically. Let me know the results of printing and scanning doctor.
   
  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• LaserJet CP1025 ns: HP sytem tray stopped working

  As soon as I turn on the printer, and he finished his process of starting, I get a message that "HP system status bar stopped working.  The printer seems to print fine, despite everything. However, I had a problem with the tasks of a new cartridge and tried to run the clean program Page and discovered that the icon of the device setting is not in the Windows system tray, and so I could not access the Page clean process. So I was wondering what else could be missing its shot upward.

  I reloaded the driver. HP system tray works more or never start.

  I followed a thread that suggests to disable the bidirectional printing setting, but none of the directions did what I saw in the properties of the printer.

  Someone at - it suggestions?

  Hi @JR-37 ,.

  I see that you get an error message for the "HP sytem tray stopped working. I will definitely do my best to help you.

  Try the following steps to see if it will solve the problem.

  Uninstall the software. Printing software uninstalled.

  Download and install the latest version of Adobe flash player.  Adobe Flash Player Support Center.

  Install the base driver. Base driver HP LaserJet CP1025.

  Update the firmware of the printer. Firmware Update utility from HP LaserJet Pro CP1025nw color printer.

  If you need help, let me know.

  Good day!
  Thank you.

• LaserJet cp1025 nw

  LaserJet cp1025 nw / / to the WINDOWS 7 HELP.

  No error message.

  This printer uses 4 cartridges.

  Red and yellow cartridges are empty.

  It was a SIMPLE BLACK printing without problem.

  Today, it stopped printing.

  NO ERROR MESSAGE.  Only, it of there and does nothing.

  BUT, when I go to clear the print queue, there is a yellow exclamation mark for the printer.

  When I do a "TROUBLESHOOTING" for the printer, it says that everything is OK.

  I turned off the printer and restarted.

  The same problem.

  THOUGHTS?

  Welcome to the Forums of HP WALTER-TBULL,

  I see by your post that you have two empty toners and that he cannot continue to print. You also have a yellow exclamation mark on the icon of the printer. I can help you with this problem.

  The yellow exclamation mark on the icon of the printer that would indicate that the printer is not recognized because the printer would be in a status of error with 2 empty toners.

  If the lights are on yellow and magenta toners and are completely exhausted the printer continues to print until they were replaced.

  You can change the print driver to print in black only, but you will still need to replace both him are currently out of print.

  This will allow you to save toner in the long term. This information is provided by the manual. LASERJET PROFESSIONAL CP1020.

  Go to start, devices and printers, right click on the printer and click Printer Preferences.
  Click the color tab.
  Click the automatic or manual setting.
  Click on printing in levels of gray option to print color in black and gray.

  This option allows to print color photocopy or fax documents.

  You can also use this option to print copies of the draft or to save the color toner.
  Click the OK button.

  Good day!
  Thank you.

• No job no - LaserJet CP1025

  I use a LaserJet CP1025, USB connection with an iMac (OSX 10.6.4 I get a message that 'work not required' when I try to print, and nothing happens. I rebooted the printer software (and the upgrade too) but it did not help. Anyone know what to do next? Thank you

  Hi anthub

  I understand that you are not able to print from the Mac 10.6.4 Laserjet cp1025.

  This document explains how to print a material of that test to see if it is a hardware problem or a software problem.
  http://support.HP.com/us-en/document/c02495036

  Let me know if it printed the hardware self-test.

  To fix the permission to drive on the mac.
  Go to the hard drive to the Mac, applications, utilities, disk utility, click on mac hardrive left side, click on repair disk permissions.
  (when it's over will show disk repair completed)

  Restart the mac.

  I would like to remove the drivers from the printer and add it back.
  Click on the Apple.
  Click on Preferences and system, click on the print icon & scanning (on
  some systems, it may appear in Print & Fax),
  Highlight the printer, click on - sign to remove the
  printer. Then click on the + sign, then select the printer from the list, click the Add button.

  Trying to print now.

  If you need more simply make assistance let me know.

• Color LaserJet CP1025 cannot print the PDF file

  The printer cannot print the PDF file (it shows what a document is to suspend status), waiting for long only time still no progress. in the meantime, WORD file printing is no problem.

  Thank you for your advice, I followed your second method and install Adobe Reader, the problem is resolved.

• Color LaserJet CP1515n colour misalignment between CMYK print

  The registration of 4 colors happened significantly out of alignment by up to 2 mm horizontally and vertically.

  I tried all HP through article 11 documentation, but no amount of calibration or change supplies will put the colors in alignment. I had hoped that it would be a tool for recording the laser printer but I can't find one despite extensive research in both HP and the rest of the web.

  I recon HP actually enroll in physical alignment cartridges, but is not apparent to me how the drive chain could not change to that effect. Clearly a small inset can move the cartridge from left to right, but for setting vertical, there seems to be little or no play in how the toner cartridge fits into the machine.

  Clear the printer has recently been authorized and nobody has complained that it has not been moved or replaced supplies (other than paper), it's probably a physical problem, but what? I don't think it's a software issue, unless there was an upgrade to the printer driver. I can't think that firmware would have changed either. The printer is a model power (June 2012), just out of warranty!

  Someone knows how to solve this problem (of the real solutions only please), or perhaps an HP employee will actually know a good way to do this?

  No, you didn't read my message. I already tried this (which was my opening comment!). You have not addressed the issue that I actually asked. I suspect that you must be a person rather than a real engineer.

  Insurance paid as they said that it is not economical to fix a HP printer, once this misalignment occurs. I don't have to talk to an engineer directly; However what I have collected the insurance guy was that when this kind of problem happens, it's a band full employment and the realignment of the mechanism and lasers. Unless you have the tools to align what you can as well take the machine to the scrap yard and recycle.

  That is to say there is no mechanism for alignment of colors as with an inkjet printer. It is designed to be correct and set up in the factory. If a problem occurs there is no way to fix it easily.

  From 2012, the machine no longer in production. His replacement is identical, but takes the form of different toner cartridge. Therefore the HP stupid and misleading statement to charge provides in ways I can't eBay as unused and cost me a lot of money.

  I've had two of these machines now and both went wrong. A HP scanner too that didn't last! Clearly HP products at the end of low market prices are not worth buying if they are so reliable.