12.3.3 version USB connection

Similar Questions

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• Install HP Officejet 5740 & USB connection problems

  I recently bought a HP all-in-one OfficeJet 5740 printer for my desktop Dell XPS 8700-(Windows 8.1) and attempted to install, using the USB connection option. I was informed by the instructions of configuration to go online to a Dell website for the latest version of the installation software to download if I had access to the internet. I have DL'ed software and it apparently installed OK-(aucune erreur ou quoi que ce soit pour indiquer qu'il n'a pas abouti). Once finished with the installation of the software, I got to the window option connection-(wireless, usb cable ethernet cable). I chose the option of usb cable, however after having to then connect the USB cable to the printer and the computer via the usb cable, it tries to connect, but alerted me, stating; "Failed connection to printer, printer was not able to connect successfully via the usb cable. I tried this several times-(par moi-même et remote assist avec Support ordinateur Dell). I had the same problem last week when he tried with my old HP Officejet 6100, which I wanted to replace. I ran the program of doctor printing/scanning HP on the 5740 and it lists the printer and the software installed, however the HP printer install lists assistant the complete software package for the printer is not installed and some basic features drivers may be missing or damaged. Also when I go into Control Panel, then devices/printers, it displays the icon of 5740, however after rt - by clicking on the printer icon, instead of the regular menu that comes up to the top-(showing the complete properties, select this printer as the default printer, etc.), it displays a menu of smaller selections very-little (who don't understand not the "select as default printer"). I tried downloading the printer software two ways-(via the HP website on line 1, and then click the installation CD supplied with the printer, the same results. The printer was purchased 11/15/2014 and seems works very well-(tirages test-page, page d'alignement, etc.), but I can't print anything, and apparently it can not connect via the USB-(* j'ai acheté un nouveau câble usb 2.0 hier et, utilisé pour écarter la possibilité d'avoir un mauvais câble). My Dell computer is only 10 months old, and I upgraded to 8.1 Windows back on 25 October.  The USB ports on the computer all seem to work properly when connected to another USB device other than the 5740 printer.  What is the software apparently is not fully installed, with some missing drivers or, possibly, USB drivers should be updated? Any help would be appreciated. Thank you!!!

  Thanks for responding, but I was able to get the printer installed with the help of diagnostic, remotely in line with my computer manufacturer support staff. He was determined to be a software problem because of a recent update of Windows 8.1. Thanks for the effort!

• No settings to change USB connection mode

  I just bought a m4.
  Now, I tried to change the USB connection met.
  But he's not here.
  The only thing I can do is to install the software for the pc, but that's all.
  Does anyone else have this problem?
  Or did someone knows how to solve this problem.
  The phone is up to date with android and the build version.

  Hi @Koningdefuijk,

  Are you referring to change Connect USB to MSC mode? If so this feature is not available in the Xperia M4 Aqua. PSG is the only available USB connection mode, so there is no setting to change this.

• U2413, no USB connection, insert an SD card

  The issue seems to be the same as in this link:
  en.Community.Dell.com/.../19629584

  I got the Dell Ultrasharp + X-rite i1 Display Color Calibration work for some time (I use a Dell laptop), but now the calibration SW complains about the connection of the USB cable between the monitor and the computer so I can't start the measurement. I reinstalled the SW DUCC (the Windows 10 Monitor driver, both of the "drivers & download" section of Dell), reset the screen (using the attached link procedure above). I even bought a new USB cable between the computer-screen, but it does not help.

  Please note that the screen works as such by the displayport and the DUCC SW recognizes the measuring instrument real i1 Display, as it says that the device is ready.

  I have been upgraded to Windows 10 since the last time I performed calibration successfully, but as I downloaded and installed the compatible files (see above), it should be ok. SW DUCC did a check for later versions of file and I was prompted to install v1.5.12.18922 | Version of DRX: 2.4.0.1, but the problem remains the same.

  Please advice, I count on this to my ongoing photo project.

  / Benny

  After some reading more, I discovered that someone has managed to solve this problem by inserting an SD card into the slot of the monitor. Magically, this in fact active USB connection between the monitor and the computer. Now everything works normally (i.e. both the SD card is inserted).

  You can close this ticket.

• Photosmart 2610 usb connected stops printing in the queue; error noted. IMac os 10.6.8. prints test page

  I used all-in-one HP Photosmart 2610 for years without change. Now everything is print spooling with non-descript "error" when it is in the queue. I can print the test page for the utility and I can print via the usb connection to my laptop which has supposedly the same software and updates. I uninstalled and reloaded the software updated and get a message that the software has been installed successfully. Install HP works OK and the dashboard widgit working to show supplies. But the printer in the printer/Fax preferences poster "information not available" when I check for supply levels.

  When I try to use the printer utility I get a message "some components installed on your computer have been developed for a different version of the HP utility. These components will not be loaded and some features related to your device cannot be accessed ".» I downloaded the latest version of the software and reinstalled my original software CD and cannot always my computer to print.

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• USB connection dropped on reboot

  I'm on the merger 7.1.1. and OS X 10.10.3. In earlier versions of the Fusion and OS X, USB connection would survive a restart of a Virtual Machine (Windows 8.1 in my case).

  What is happening now is that everytime I restart the VM, the USB connection is lost and must be reconnected manually. The device is a USB from Panasonic adapter.

  Any ideas how to solve this problem so that the machine reconnects automatically on a reboot as was previously the case?

  Thank you very much

  Jim Strong

  Hello Jim,

  Please take a look at your USB to your Virtual Machine settings.

  To do this, go to menu 'Virtual Machine'-> 'USB & Bluetooth'-> 'Settings USB & Bluetooth'-> put a check mark in the box on your device and in the last column, make sure that it is set to 'Connect to Windows' and not 'ask what to do '.

  Hope this helps,

  --
  Wil

• Try to configure the usb connections

  Try to configure usb connections:

  I have the version of VMWare Server 1.0.9 156507 installed on a laptop with Wndows XP with the latest service pack installed.  The guest operating system is Vista.

  I cannot see a drive hard usb attached to the laptop.

  VMWare Server help - setting up a USB Port, says I have to select to configure the port of the USP.  There is NOT point in the list, however.  Also, when I select VM & gt; Removable devices, there is nothing there.

  I think that will all users, that would be very plug-and-play at this point.  This has proved to be a frustrating problem.  Any help with this would be greatly appreciated.

  ... There are no. USB controller in the list article, however.  Also, when I select VM > Removable Devices, there's nothing there.

  You must Add a USB controller to the parameters of the virtual machine.  Shut down the virtual machine.  (Not hang).  Then add a USB controller to the virtual machine.

  Note that only supported Server1 USB1.  There were many reports of devices USB2 works do not correctly with Server1.  For more details, see problems using some devices in a Virtual Machine (774) .  Basically, for these instances, you must either disable the USB2 support in the guest OS or use a USB1 hub to slow the USB device.

• iPhone 6s use usb connections in my car

  6s IiPhone uses usb connections in my car

  iPhone devices no load carrier via the USB Ports of the music player

• Photosmart C309 printer: change to usb connection

  I currently have a wireless connection to my computer.  How to change that to a USB, wired connection?

  Hey @dac71, welcome to the Forums of HP!

  I understand that you do not want to change to have a wireless connection to a USB connection between the printer and the computer. When you connect a USB cable, the printer automatically installs the correct driver and since you have already paid it works wirelessly, it would be seamless.

  If you're having trouble, and you have a Windows operating system, run the HP print and the doctor Scan with the USB cable connected and it will help: www.hp.com/go/tools.

  If you have a Mac and you need assistance let me know.

  If it meets your needs, please click Accept as Solution button below. If there is anything else I can help make sure you respond back and I will do my best to help!

  See you soon!

• Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  Why my iphone will have problems with pandora in synchronization with the pandora application on infotainment chevy via a usb connection?

  This was never resolved?  I have the same problem with an iphone 6s.  It is only my phone like an ipod playback.  I don't get the interface of Pandora.

• Gigashot K40 - USB connection mode lights up when

  Hello.
  I have a camcoder Gigashot K40. When I copied the files on my PC, camcorder battery sat. I connected AC voltage, camcoder and continuous copy operation. After that I disconnected PC camera as usual.
  The problem started when I turned my camera next time. When I turn on camcoder, after 2-3 seconds, it entered in USB connection mode (but without text "Mode high speed USB" on the screen).
  http://img9.imageshack.us/my.php?image=k40m.jpg
  Only way to enter normal mode for recording videos is pushing after lighting camcoder menu.
  I tried to do the soft reset, I pushed the RESET button, I tried to reload the firmware - but it does not help.
  Any ideas? I can solve the problem by myself or must I go to service?

  So soft reset didn't help I really don't know what you can try now.
  Call and ask what the problem is here.

  I thought that the rebate to zero must be the solution when the cam is source of confused.
  Please let us know what they tell you.

• USB connection does not work on my computer for hdr-cx260v

  It is a question (especially) on and off (sometimes). I have worked with Sony and have sometimes succeeded. With the help of the 'extra' 16 GB card works to connect and load. My problem is when I use the video stored in the internal memory and using the usb connection. If/when I ever actually loading the data from the internal memory (I have actually already loaded most, but not the most recent), I intend in the future to use only the memory card "exernal. My most recent appeal of Sony said I have no help since the camery is 2 years and more - they send me an e-mail to a site that gives instructions, but the instructions don't seem to solve my problem. I don't seem to have any connection problem "devices" of my USB ports.

  When I connect the camcorder usb to my desktop (using different connections of USB drive) pc, my computer does not recognize the fittings of the. When I use another card memory USB for same usb connections, the computer recognizes the drive. There have been a few times when the camcorder has acknowledged the connection of the camcorder (most recently on June 12) - but this does not occur at thie time. If I take the memory card 16 GB additional of the camcorder and connect it to the connection of memory card, the computer has always recognized it.

  My problem is trying to get the video from the cameras internal memory via the USB connection.

  I think if/when can I get these loaded files, I have the intention of is no longer using the internal memory of the camera and always use the extra memory card.

  Stone

  I realize that if I could have the laptop recognizes the usb connection, I could manually copy video files myself, even if I think THAT TDC would have also worked in this case.

• USB connection problem

  Whenever I connect my tab to any PC or laptop using the USB cable, it is not connect. It is not pop window on the USB connection. USB port works fine. Tab gets charged through this property. Functional disorder it is. Everyone will solve it?

  Hello and welcome to the HP support community!

  Need a few details.

  What tablet you are asking about?

  What OS is on your PC?

  Tried another cable?

  Usual suggestion is to unplug the devices and reboot the computer and tablet.  Check the settings of the tablet in storage/settings / < icon options, top right - looks like 3 blocks stacked vertically > / USB connection to the computer.

  See if the PSG is checked.  It is suitable for the transfer of all types of files.  Connect the devices.  If still no joy, try to uncheck MTP and PTP.  This should make the Tablet appear as a camera.

  I had to do with an old Win XP computer so that he can "wake up" and make the connection.  I then switched to the PSG and all was good!

  WyreNut

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.