PIXMA MG5320 scanning

Similar Questions

• PIXMA MG5320 print white pages

  Hello! I have a 3 years, Canon Pixma MG5320, who has started printing blank pages in recent weeks. I don't think that it is no longer under warranty. I changed all four cartridges, did several cleanings and deep cleanings (using about 2/3 of the ink). The nozzle head and print head alignment results are:

  

  Red and blue prints for the head nozzle test and only blue prints for the alignment of the heads. Is there a way I could directly inspect the nozzle head? It is perhaps also an alignment problem? There was another post with a similar problem. Should I just call tech support? Any help would be greatly appreciated, thanks in advance!

  Hello.

  If some colors are missing after cleanups were conducted, troubleshooting with our support group is needed to narrow down the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help contact us.

• Canon Pixma MG5320 printer does not print. Ink tanks are full, but the pages are blank. Help, please.

  I recently formatted my hard drive on my laptop and loaded a full version of Windows 7. (I had been running a version upgrade before formatting.) I downloaded the latest driver of printer on Canon website. My Canon Pixma MG5320 will not be printed. Ink tanks are full, but the pages are blank. This happens if I print from my laptop or my iPhone or IPad. What is the problem? Help, please.

  Hi marsha3236,

  To try to resolve the problem, you'll want to confirm that the inkjet nozzles are distribute the ink properly by printing a printer nozzle check pattern.  If the model does not print correctly, we recommend you to at least cleaning and deep cleanings on the printer to try to get the printing ink.  To print the nozzle check pattern and make cleaning, please follow the steps located here.

  If you are still experiencing difficulties after cleaning, please call or write us using one of the methods on the page contact us for further assistance.

• Wireless Canon Pixma MG5320 printer does not

  I got the Pixma MG5320 for a few years. All computers are connected by wifi. Not had any problems until yesterday. The printer is displayed in offline mode in all computers suddenly and nothing can be sent to the printer. I tried to turn the printer off and on several times. The printer itself seems fine. I did the same thing to computers. The printer does not appear in network. I use Windows 7 and Windows 10.

  Anyone know what is the problem and how to fix it? This is the problem with the wifi the printer component and is it replaceable?  I have a lot of unused cartridges. Just too lazy to replace this printer yet.

  Hello.

  If no changes have been made to network and continue to get the error offline, additional troubleshooting is required to limit the cause of your problem. Please contact our support group using the link 'Contact us' below for further assistance.

  It has not responded to your question or problem? Find more help contact us.

• Impossible to install the new printer, Pixma MG5320 without error "setting up the network printer down.

  I have a new all-in-one Canon Pixma MG5320. I am unable to get the installer to finish with on "setting up the network printer down." Despite numerous attempts to:

  (1) download the driver on the internet instead of the installation CD.

  2) with the help of msconfig with selective startup and disabled all programs except Microsoft.

  (3) creates the new administrator account and returned through it all.

  (4) turned off firewall and anti-virus

  The error is compatible and I never have the unit set up under devices and printers. The installation is carried out without any errors marked and you will see the error if you get into the details of setting up and get him. The computer sees the printer when it finds and he answers. The printer and the router, both seem to be communicating correctly. Repair auto and troubleshooting programs I ran as fix - it do not detect errors. The printer works fine through a USB cable. I don't want to continue to use USB because that's why I wanted to go wireless. I'm sure that I forget some of the things I went through in my attempts to get this working. Anyone with any ideas or know what's going on please help.
  Tech of Cannon was very knowledgeable and says he sees this once a month. He believes that some program interferes with the installation process. I do thanks in advance. Nice day.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  From the description of the problem, you are not able to install the printer Pixma MG5320. I'll be happy to help you on this question.

  Let us try the steps from the following link:

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• Impossible to install the CD for printer Canon Pixma MG5320 on Windows 8

  Windows 8 is a strange beast!

  Just bought a Canon Pixma MG5320 to go with my new Inspiron 2330 Touch all-in-one printer...
  After SEVERAL TRIES, it will not download CD Canon!  Somehow, with the USB printer, it will print BUT I can't analyze;  not the end of the world, but I pay $100 + $ for the 3-in-1 printer and would like to get some use out of it other than the printer option.
  There, can someone help me? It's the guest who stops at all of the company:
  "DRIVER IN USE. IF YOU DO NOT USE THE PRINTER DRIVER, IT CAN BE USED BY OTHERS ON THIS COMPUTER.  QUIT ALL APPLICATIONS AND THE PROPERTIES OF THE PRINTER, AND THEN TRY AGAIN.
  IF YOU STILL HAVE A PROBLEM, RESTART THE COMPUTER, AND THEN TRY AGAIN. »
  Well... that has not worked.
  Always prints.  No sweeping.
  Little help!

  I had the same error: printer in use driver. If you're not... bla... bla...

  My printer is Pixma MG3170

  Here's what I tried and it worked for me:

  1. go to usa.cannon.com and download the respective printer for your printer driver

  2. run

  Note: it takes time for the whole installation to complete, but be patient.

  Rgds,

  Andy

• Canon Pixma wireless scanning with MBP 10.11.6 mg3220

  Suddenly, from one day to the other, the scan wireless function no longer works between my MBP (OS 10.11.6) and the Canon Pixma MG3220 printer/scanner. I downloaded the driver of Canon more up-to-date, but eliminating the possibility of using the Image Capture.

  How to restore the wireless function? Is it possible to uninstall this latest driver and reinstall the driver of the Mini Master of Canon, good through 10.8 OS?

  If you haven't already done so, try to reset the printing system.

  Reset the printing system - OS X El Capitan

• PIXMA MG6120 scanned in PDF with Windows 7, but not after that I went to Win 8.1/64

  I have a printer Canon Pixma MG6120, who analyzed the documents properly to a pdf file in the past, but will not now.

  The last time that I scanned a doc to PDF was July 1 when I was running Win 7 Home Premium with any driver was then installed.  The printer worked properly in all modes.

  Then I bought a new desktop that came with Win 8.1/64.  I thought it would automatically update all my device drivers, and given that all print and copy on the gun functions work well, until yesterday, I had no reason to suspect that something was wrong.

  Now when I try to scan a document to a pdf file, I find that I can't scan anything, in any format, even if the other functions of the printer are working very well.

  I used Windows to search for updated drivers and note that I have the right pair.  But there are two cryptic messages on the window 'events' devices and printers when I see exactly which driver I have:

  • Driver management concluded the process to install the driver prncacla.inf_amd64_19fbb18075fefb90\prncacla.inf for the Instance ID of device USBPRINT\CANONMG6100_SERIES\7 & 47229F9 & 0 & USB001 with the following status: 0xE0000246.
  • Driver management concluded the process to install the driver mg6100p6.inf_amd64_7a61593f9c801b4c\mg6100p6.inf for the Instance ID of device USBPRINT\CANONMG6100_SERIES\7 & 47229F9 & 0 & USB001 with the following status: 0x0.

  And I don't know how to determine exactly what driver or version I actually.

  I do not remember having messed up the settings but I must have.  But I can't understand how to reset them so that I can scan anything, even in JPEG format.  Here is the sequence of messages that I get when I try.

  • I put the doc in the correct position on the screen.
  • I choose scan and then press 'black' to start scanning (or 'color'; it's okay)
  • It says "processing...". Please wait... »
  • nothing happens; the machine returns to the original screen I can only try again, and nothing past then is
  • I can so where I can click on "scan settings".  I always forward scanned docs on my desktop through my USB cord
  • I click on 'scan settings' and I get:
  • size: 8 1/2 x 11 (that's what I want)
  • format: PDF (which is what I want). There is an exclamation point and I can click on "error details" so I did that.  I get:
  • 'specified function not available with the current settings.  ' Change the following settings: Format.
  • To change the format of JPEG.  I click on 'black' and he said: ' treatment... please wait "and then he returned to the starting window as it did when I tried to scan to a file pdf. nothing works!
  • So I'll be back to where I can try to review the pdf settings, and only I can change all the others that choose JPEG, etc., instead of PDF, is something called 'unsharp mask' on or off.  Choose one or the other has no effect.  The printer will not at all, analyze a file pdf or something else.

  For example, nothing works.

  I think that I don't really have the right driver, but Windows says I do.

  Help, please.

  THX.

  Tom

  Hello.

  Please ensure that our MP Navigator EX program is installed.  This program controls the scanner.

  You can download the program on our Internet site at the following link:

  MG6100 Series driver & Softare

  If additional information is required, find more help contact us.

• PIXMA MG5320 stopped printing black even with new cartridge and a deep cleaning. The colors are OK.

  Some time previously, failure to print quality settings, black would go a little weak on the last few lines of a full page of text. If there are more pages, each would start very well but have the same poor quality near each bottom of page. I changed the setting of the standard high quality & the problem seemed fixed. Just course several days showed poor quality at the bottom of the pages. Today, black does not print. I did 2-3 deep cleanings with a new cartridge, but still no black. Color printing very well. I need to replace the print head?

  Hi PMHilton,

  Given that black ink is printing is no longer and to replace the ink tank and perform deep cleanings have not solved the problem, the printer may require repair.  We ask that you call please 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays) for assistance.  A Canon technical support representative will be happy to help you.  There is no charge for this call.

• PIXMA MG5320 stopped printing black, colors are OK

  Some time previously, on print quality default settngs, black would be weak or incomplete on the last lines of a page. If there are more pages, each would start fine but have poor quality down. I changed the setting from standard to high quality and the problem seemed fixed. These days the poor quality near bottom of page returned. Now the black print at all, even after a new cartridge and the head cleaning. Colors print OK. I need to replace the print head?

  In fact, remove the ink tanks & placing the printhead in a flat shallow of Windex for 2-3 hours has helped produce a nozzle test print which was sharp as a cleat, black included.

• My PIXMA MG5320 has error U052-' the type of print head is incorrect. Install the correct print head

  My printer has stopped between different documents with the printing error U052.  He has said, "the type of print head is incorrect.  Install the correct print head. "I couldn't find help on the support page.  A YouTube video showed me how to get out of the print head and clean it manually.  I did this and reinstalled my ink cartridges.  I still have the error.  I can't align my printhead.  Buy a new print head or I have to buy a new printer?  I love this printer!  He is a year old.

  Hi Brooks14,

  If your printer was purchased less than a year, we will be able to replace it under warranty without having to buy a new.  Since you've already tried it replace unsuccessfully, I recommend to use the link contact us to contact our support staff that can go through your warranty options

• I want to connect to a Canon MG5320 printer to my new PC which has Windows 8 and I do not know how... The new computer is a HP Pavilion p6 - 2316 s PC Help!

  I don't know how to install a printer on my new PC.  The printer is a Canon MG5320, who is a year and work well with my computer discarded.  Now I have a new HP Pavilion p6 PC - 2316 s and I can not print from it until it is installed. The printer is on and ready, but does not appear on my computer screen as it did on the old computer...  Help!

  [Moved from comments]

  Hi Aggietol,

  1. Visit the website of Canon Pixma MG5320 & driver software
  2. Select the operating system ==> Windows
  3. Select the Version of the OS ==> 'Windows 8' If you have a 32-bit version of Windows 'Windows 8 (x 64)' otherwise
  4. Click on the arrow of drivers
  5. If your printer is connected directly to your PC, select "MG5300 series MP Driver worm." 1.00 has (8/8 windows... «. If it is connected through your local network, select "MG5300 Series Mini Master of installation (Windows 8/8 x 6..."
  6. ...

  Hope this helps at & answers your question.

  See you soon

  LZ.

• Computer restarts when I try to open the Canon software.

  Original title: I recently installed a Canon PIXMA MG5320 printer wireless and all related software, now when I click on one of these icons to program my PC reboots.

  I recently installed a Canon PIXMA MG5320 printer wireless and all associated software, now when I click on one of these icons to program my PC reboots.

  I don't know why you're so reluctant to identify which application is causing the problem.  However, I think it has something to do with the scanner.

  From what I understand, the ppbint.dll file (which is what is at the origin of the problem) is associated with a made by Visioneer PaperPort scanner program.  I am not sure, but I think that Canon has an arrangement with Visioneer to use its software with scanning equipment that belongs to your PIXMA MG5320.  (If you're curious, do a search for ppbint.dll and when you find it, do a right click, select Properties, click the Version tab and see what company is listed as the owner.)

  Two of the following items describe situations similar to yours but the first only mentions Brother printers (instead Canon) and the second relates to Windows 2000 and Windows NT instead of Windows XP.

  http://support.Visioneer.com/knowledgebase/articles/VIS1240%20-%20PPBINT.dll%20Error%20when%20Opening%20The%20ACT%20Application.asp

  http://support.Microsoft.com/kb/831239

  However, I suggest you do one printer other than the default printer MG5320.  If you have any other printers, install the generic/text only printer and make it the default.  See the instructions here--> http://support.mfm.com/support/std_procedures/xpgenericprinter.html

• MG52050 code error 5, 202, 54 with scaning

  All of a sudden, I get an error message with my scanner.  Code 5, 202, 54.

  My printer still copy and print, but will not scan. I have not changed anything. I am uing Windows 10.

  My printer is acanon MG5250

  Tried to reinstall, followed the instructions on http://community.usa.canon.com/t5/Printer-Multifunction-Support/PiXMA-MP250-scan-error-5-202-54-Prin...

  still does not work

  Oke... It's weird... I solved it.

  How? restart the pc save modus. removed the old software. reset

  Unplug all cables, installed the latest version of the software, plug in, reboot and it worked!

• I have a MG5220 who is no longer under tension and have many unopened ink.

  I have a MG5220 who is no longer under tension and have many unopened ink. (C-225 and C - 226).  I checked in our stores for a new printer that uses this ink, but can not find.  Is there any inexpensive multifunction printers that still use this ink?

  Hi dixiedazzle,

  Canon offers always a printer that uses the same ink as your PIXMA MG5220, the PIXMA MG5320.  For more information about the PIXMA MG5320, please use this link:

  http://www.USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_print...

  For additional assistance, please contact our support group using the following link:

  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer