12 c and LDAP for RAD formulas

Similar Questions

• Cisco VCS and LDAP for authentication of users

  I have a question about setting up LDAP for authentication of the user on the VCS. I want to have redundancy in my LDAP link. I believe that this is possible by setting a FULL domain name to the address of the LDAP server, then selecting a type of SRV resolution. What I'm not clear on is what the value for the server address would be if I used actually as SRV type of resolution. I should also add that I am looking to use TLS

  To clarify, if my AD domain name is myad.netcraftsmen.net. I have set the field as server address:

  myad.netcraftsmen.NET: assuming that VCS properly interrogate the DNS for the _service._proto correct parameters?

  or would I need to create an SRV record to that effect and set the field server address with the address (including the fields of _service._proto)

  or I need to specify one of the SRV records formats used by MS AD areas (there are several).

  If the latter, then what SRV record for TLS. I don't see records with port 389 (non-secure).

  My intuition tells me that this is probably the first option, but I could be far away.

  Anyway, thanks in advance for any input.

  Kind regards

  Bill

  Hi William,.

  I just checked it on a X6.1 VCS, and it seems that VCS searches SRV _ldap._tcp.domain (where 'domain' has been entered as the server address), both when the encryption is set to 'None' and 'TLS '.

  Hope this helps,

  Andreas

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• MOVI with Mix AD and LDAP authentication?

  Hi all

  Is it possible to configure VCS for authentication in mode mix MOVI.

  I have a situation in which some MOVI users are not in the ad.

  Now I woul like authenticate this MOVI via the local ldap on the highway-VCS database.

  Because I put all subarea them and area on the VCS-E with "verify the credentials" and authenticate the user MOVI via AD, works fine, no problem, but now I have the problem with the no user AD Movi.

  Anbody has any idea?

  any input appreciated.

  Best regards

  Georg

  Hi, George,

  It is possible but you need to use 2 separate VCS - C to do, where VCS - 1 c is attached to the AD domain and configured for NTLM for Video Movi/Jabber authentication requests for commissioning, and where the other VCS - C is configured to use the authentication of local/LDAP database for Video Movi/Jabber provisioning requests.

  In addition, you need to create two separate records in MSD Provisioning directory, where a single folder houses users of the AD and the other folder is home users not AD.

  Finally, you must configure the server setting internal on video Movi/Jabber, so that the AD users get their configuration in the VCS - C service which is configured for NTLM, while users non AD get their provisioning for the non - NTLM VCS - C configuration.

  Now, if you bring a VCS-E in the mixture, so that the two AD and no AD users will be connecting via VCS-E, this will get a lot more complicated, since you would have to somehow ensure that provisioning a user AD request gets by proxy via NTLM - activated VCS - c while queries for configuration of users not AD get by proxy through the non - NTLM VCS - C. This could be done with smart search rules, but that requires that you have a URI scheme for your users to provisioning, which allows you to determine whether or not a request for service comes from a user AD.

  In summary, it is possible, but it adds a significant administrative burden and would probably complicate troubleshooting a bit if it is still necessary and I strongly suggest you try instead of getting all the user provisioning in AD if possible.

  Concerning

  Andreas

• Requirements of LDAP for SSL - VPN on ASR 1002

  Hi all

  I intend to implement SSL - VPN (AnyConnect) on a rputer ASR 1002 running IOS - XE Software Version 15.1 (3) S2.

  I need to use LDAP for authentication of users and need to understand what are the requirements for RADIUS/GANYMEDE use LDAP.

  What I have to use Cisco ACS or can I use something like Microsoft IAS or free Raduis?

  Any helo will be greatly appreciated.

  Thank you

  Dmitry.

  Yes, you can use either use LDAP, Radius or Ganymede protocols to authenticate users of SSL VPN.

  You can use no matter what authentication server (doesn't have to be Cisco ACS), as long as they have either 3 supports authentication (ldap, radius or Ganymede) protocols.

  Hope that answers your question.

• vCSA 5.5 integration of ads and LDAP

  Can anyone throw any light on the process of connection that occurs when the vCSA performs and searching LDAP against a domain please? I'm working on a problem where the vCSA is unable to carry a link to the W2k8 Domain Controller LDAP. The unit joined the domain without problem create the necessary DNS entries and the AD computer account, and add the field in identity Sources works very well. The problem arises when we try to list the users/groups in the field with the 'customer MLD exception' error.

  Having come off all the 'usual suspects' such as the connectivity of network/DNS, I have reduced the question until the actual LDAP connection between the field and the vCSA. Annoyingly, I have three environments, both work very well, we didn't. I need to be successful in what is causing the problem, so need to understand the process that is happening under the hood.

  I figured it would be tied to the GPO setting to 'Require the signature' queries LDAP for controller of domain, but put even that in a work environment does not cause research to break.

  Just to update on this, it seems that one of the environments 'work' really 'did not work"in that group policy (domain controller: LDAP signing) was not actually implemented correctly.

  If you get the LDM client exception error when listing the users in the domain and using the vCSA, check group above policy (as it applied to your domain controllers).

• LCC and LDAP

  Hello

  Is it possible to integrate companies to lower COSTS and LDAP?

  There may be samples of it?

  Thank you in advance,

  Kioshin10

  Hello and sorry for the delay.

  It is possible to integrate companies low-cost with LDAP, but we do not have a concrete example of how to do it. You must use external authentication API and we have a few examples of how to create a valid authentication given a username token and a unique id.

  Basically, it is the case:

  -your client authenticates in your LDAP system on your back-end server (via a HTML form or a Flash application that interacts with your server).

  -Once authenticated, you take a 'unique identifier' your LDAP "record" (the uid, gid/uid or possibly unique name but I wouldn't recommend that) and the user name and use it to generate a token for a specific session authentication in a room.

  -and then send you the token to your Flash/Flex client or to start a Flash/Flex client that will connect to the specified room and authenticate with this token.

  In general, ACC does not require strict integration with your authentication system. Log into your system and then generate a signed token that tells companies to lower COSTS that the user 'exploit' this token is a valid user who was allowed access to a specific room.

  Anyway, please check the documentation and samples for external authentication and if you have any specific questions, or you enter the implementation details and need more help, feel free to ask here.

• Urgent - Custom authentication and authorization for the application of the ADF

  Hi friends,
  
  Custom implementation for authentication and authorization for the application of the ADF
  
  My project to use the OID , authentication and authorization, we will need to support both OAM and DB tables ( according to the preferences of the client during the installation ).
  
  I am new to this and do not have a clue about the same.
  
  Please guide me how to set up both in JDeveloper 11 g + ADF
  
  Thanks in advance.

  The answers you got up to present every point in the right direction. ADF security see the authentication of WLS, even for business authorization with respect to user roles defined on the WLS server. During the deployment, ADF security defined application roles are mapped to the user enterprise groups

  Application developed using Jdeveloper ADF +.

  This would use WLS for authentication

  Users of authentication - LDAP (OID) - are stored in LDAP

  Use the OID authentication provider in WLS

  Authorization - OAM or database (authorization details are stored in the DB or OAM tables)

  You can't allow users without authentication. If you need create authentication providers additional if they exist for OAM and RDBMS (there is a supplier of existing RDBMA, that you can use to identify users and to assign membership user groups). Then, you set the optional flag so that when authentication fails for additional providers you can always start the application.

  When running Admin users - create users from roles to create and assign permission privileges to the role (for pages and workflows)
  assign (or remove) the roles to/to leave users.

  ADF security uses JAAS to permissions that you can change using Enterprise Manager when running. Permissions are granted to the application roles and application roles are granted to business roles that which then has users become members of the. If you want to change the status of user account, then you don't do this the ADF or EM, but use a direct access to the provider of the user (for example, access OID, RDBMS access etc.) There is no unified administration API available that would allow you to do this via WLS (which uses OPSS).

  If your question is in the context of the ADF, the documentation, with that you should follow is OPSS and WLS authentication providers.

  Frank

• Available attribute schema ldap for the OAM User Manager

  Hi people,
  
  I need view the attributes of ldap multi-value (no objectClass) schema in the OAM User Manager. Somehow, only a handful of attributes are visible. When I go in the Console System identity, User Configuration Manager, tabs, users, change attributes, the attribute that I need isn't on the list.
  
  Any help is appreciated.
  Thank you, novel

  Hi Roman,

  Not quite, the method would be:

  1. create the new object defined by the user (such as auxiliary)
  2. only add additional attributes (besides the ones I see already) I need to display in the user for it to a schema Manager
  2.5 identity restart them
  3. in common Config OAM, add this object (hopefully)
  4 Add attributes to control panel users

  For step 1, I don't know how to create an auxiliary object class in the Sun Java Console (I'm not saying that this is not possible, it's just that I don't know the method). Another method is to create an objectclass to an ldif (which also gives you a permanent record of the objectclass) and you can use the files identity, oblix, data, common identity as a model for this server directory. For example, consider the file iPlanet_oblix_schema_add.ldif and look for the oblixorgperson entrance, which looks like:

  DN: cn = schema
  ChangeType: modify
  Add: identifiers
  identifiers: (1.3.6.1.4.1.3831.0.1.13 NAME 'oblixorgperson' DESC 'Oracle Access Manager defined objectclass' SUP top AUXILIARY MAY (obuiconfig $ oblocationdn $ obrectangle $ obpsftid $ obdirectreports $ obindirectmanager $ obuseraccountcontrol $ obobjectclass $ obver $ oboutofofficeindicator))

  You can create your own auxiliary objectclass use this as a template.

  Hope it makes sense.
  Colin

• I opened my phone i plwss send me password and id for Flavia

  I opened my phone i plwss send me password and id for Flavia

  open id is my

• Why not the preferences of the general calendar for "the day ends at:" only offers the possibility of 'am' and not 'pm '? And alerts for an event from 14:00 activate at the right time, but it's at 02:00.

  The "day starts at:" options correctly offer options of "midnight" through time "am" to "noon". Thus the "day ends at:" should have options starting with "midi" and moments of "pm" to "midnight", but instead, they are all time 'am '.

  And alerts for an event from 14:00 activate at the right time, but it's at 02:00. Maybe it's a consequence of the above.

  ???

  

• Cannot delete items in documents and data for each application

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Can someone help me?

  Thanks in advance

  Omari says:

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Explain what you do and what happens when you try to delete the data.

• Is there a way to automatically fill bookmarks and folders of bookmarks in the toolbar and menu for a consistent view?

  The separate group of bookmarks in Firefox in the toolbar, Menu and does not sort, I always found it cumbersome to use and manage. The search for bookmarks often means I have to open each one to find a specific bookmark. I am aware of the show all bookmarks in bookmarks option > drop-down Menu (but isn't in the bookmarks bar). I know how to copy the bookmarks and folders etc. but it is hard to do every time I have bookmark. And if I add a new bookmark folder and want a consistent view, I need to copy this folder in the Menu or eitherToolbar and copy the new bookmarks in the toolbar or the Menu as well.

  Is there an add-on or option or other alterative that exists to provide that kind of capability?

  If not, maybe an adding future functionality to Firefox to eventually change the vision presented in the bookmarks bar and Bookmarks Menu so that they match and can be activated by a new option of FireFox "change the bookmark view show merged Bookmarks Toolbar + Bookmarks Menu bookmarks and folders of bookmarks in the toolbar and menu.

  Thank you very much!

  After a few edits, I found a way to accomplish what I want, and fortunately, it can be done in the application of Firefox without needing an add-on.

  I simply copy the bookmarks unordered top-level in the top-level bookmarks toolbar and the bookmarks Menu of top-level. This, combined with the convention to add all new bookmarks in the folders under Unsorted Bookmarks or Unsorted Bookmarks, provides the unified content bookmark I want across all views bookmark 3 (Unsorted, Menu, Toolbar).

  From the library page (grown by selecting from the menu of Firefox bookmarks bar > show all bookmarks), if I select Unsorted Bookmarks, copy and paste into the bookmarks toolbar and paste in the Menu bookmarks, this is what I want. I actually created a symbolic/reference/shortcut link to Unsorted Bookmarks the other two favorite places can be found.

  With Unsorted Bookmarks in the bookmarks toolbars and bookmarks Menu, any add/remove bookmarks or add/delete records or restructuring of the bookmarks under Unsorted Bookmarks directory tree is also immediately reflected in all 3 of the possible locations of bookmark (Unsorted, toolbar, Menu).

  The design and implementation of bookmarks supports this simple solution, so Bravo for designers and coders for built-in extensibility / generality which support this approach. And thanks for the posters for giving me some background and history on the bookmarks in Firefox, motivation me digging to find this solution which is quite simple and elegant.

  Thank you!

• Why have I been asked and respected for download 39.0 at least 7 times. My version is still 38.0.5

  Why have I been asked and respected for download 39.0 at least 7 times. My version is 38.0.5
  It does not appear to update.
  In addition, why in the last twelve months lost my cursor when I am in half top of the screen. I went to Apple. The problem only occurs in my Firefox browser.
  Dedicated Firefox user
  Hugs, bad
  Malcolm Mckay

  If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

  Download a new copy of the Firefox application and save the file to disk on the desktop image

  • Firefox 39.0: https://www.mozilla.org/en-US/firefox/all/
  • Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install or update Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• How can I get IWorks or Pages and Numbers for my MACBOOK PRO running Mavricks?

  How can I get IWorks or Pages and Numbers for my MACBOOK PRO running Mavricks?

  They are available in the Mac App Store.