MOVI with Mix AD and LDAP authentication?
Hi all
Is it possible to configure VCS for authentication in mode mix MOVI.
I have a situation in which some MOVI users are not in the ad.
Now I woul like authenticate this MOVI via the local ldap on the highway-VCS database.
Because I put all subarea them and area on the VCS-E with "verify the credentials" and authenticate the user MOVI via AD, works fine, no problem, but now I have the problem with the no user AD Movi.
Anbody has any idea?
any input appreciated.
Best regards
Georg
Hi, George,
It is possible but you need to use 2 separate VCS - C to do, where VCS - 1 c is attached to the AD domain and configured for NTLM for Video Movi/Jabber authentication requests for commissioning, and where the other VCS - C is configured to use the authentication of local/LDAP database for Video Movi/Jabber provisioning requests.
In addition, you need to create two separate records in MSD Provisioning directory, where a single folder houses users of the AD and the other folder is home users not AD.
Finally, you must configure the server setting internal on video Movi/Jabber, so that the AD users get their configuration in the VCS - C service which is configured for NTLM, while users non AD get their provisioning for the non - NTLM VCS - C configuration.
Now, if you bring a VCS-E in the mixture, so that the two AD and no AD users will be connecting via VCS-E, this will get a lot more complicated, since you would have to somehow ensure that provisioning a user AD request gets by proxy via NTLM - activated VCS - c while queries for configuration of users not AD get by proxy through the non - NTLM VCS - C. This could be done with smart search rules, but that requires that you have a URI scheme for your users to provisioning, which allows you to determine whether or not a request for service comes from a user AD.
In summary, it is possible, but it adds a significant administrative burden and would probably complicate troubleshooting a bit if it is still necessary and I strongly suggest you try instead of getting all the user provisioning in AD if possible.
Concerning
Andreas
Tags: Cisco Support
Similar Questions
-
AnyConnect user using the user certificate authentication and LDAP authentication
Hello
I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.
Any help please.
Hi subhasisdutta,
This link will certainly help you with the configuration:
http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...
Hope this info helps!
Note If you help!
-JP-
-
vCenter 5.5 and LDAP authentication
Hello
I'm new on using vCenter and had a quick question about LDAP authentication. I installed vCenter as a device on my ESXI server and it seems to work fine, but when I connect the web client to vCenter I have no single sign on options to enable LDAP authentication
So I did some research and a few posts mentioned that I had to enable SINGLE sign-on, so I have it configured as embedded will be fine then another message mentioned that I needed set up AD authentication on the vCenter server and ensure that the host to vcenter name was in the area...
So I want to only LDAP authentication, I don't want to join my VMs to the domain. So am I missing something?
Thank you
To be able to configure SSO, connect on the Web Client using the [email protected] account. With this account, you will be able to add your AD/LDAP as an identity Source and configure the permissions on the objects of the vCenter Server inventory...
André
-
Hello. I am trying to format a table, so that when I hit it, it moves to the bottom of the page and the bumps any text underneath down as well (that is if you can see the whole table and all text at any time)
.
However, the only options I seem to have are moving with the text > inline with the text. The first part is what I want, but having the means of inline with the text of table than all text below it floats UNDER the table, and you can't read it.
PIC 1 - My only option when "move with the text" is selected. As you can see all the other features are also grayed out.
Photo 2 - I want now, select above and below, but when I select something other that in line with the text...
PIC 3... it jumps to stay on the Page option is not what I want.
Any ideas?
You can have a floating table in v4.3 Pages ' 09 that moves before the text typed before it, but this feature has not been added to any release of v5 Pages. Simply set the table in the Wrap Pages ' 09 Inline with the text Inspector, and object causes the film if you wish.
-
Why my PC now starts with black background and not authentic message?
Original title: why PC starts in Mode safe?
I have Microsoft Windows Vista Home Premium 64-bit Edition.
Before going on vacation, I turned off all power. After that we are back and turned on PC, system booted in safe mode. Screen has black background.
Message reads; Windows Vista (TM) - Build 6002 - this copy of Windows is not genuine.
What could have happened? PC was working fine before our departure.
Moved from Vista Performance and Maintenance Forum.
How to activate Windows 7 or Vista manually (activate by phone)
http://support.Microsoft.com/kb/950929/en-us1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) to select your "country" you are in the drop-down list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700What's the relationship between activation and genuine Windows?
http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-WindowsWhat is the validation, and how does it work?
Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvistaAuthentic Microsoft software program privacy statement
What data is collected?
http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement-Product key of letters and numbers-
Not confused the letter B with the number 8, the letter Q with the letter O.
the letter G and the number 6.A, E, I, O and u are not used.
---------------------------- Alternatives -------------------------------------
To enable the use of the phone
1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
then by clicking on activate Windows now. ?2. click on show me other ways to activate.
3 type your Windows 7 product key, and then click Next.
4. click on use the automated telephone and then click Next.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.5. click on the location nearest you from the drop-down list, and then click Next.
6. call one of the available phone numbers listed. An automated system will guide you through the activation process.
7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.
8 Note the confirmation ID the phone system gives you.
9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.
10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.
How to contact a Microsoft Product Activation Center by phone
http://support.Microsoft.com/kb/950929Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspxLearn about Activation:
http://TechNet.Microsoft.com/en-us/library/ff793423.aspxJ W Stuart: http://www.pagestart.com
-
Elements of 13 for Mac. Bought today. Slideshow no longer works. Confuses no pictures selected and previous slideshows created in the evaluation version. Worked in trial, now paid and no longer works!
Moving to Photoshop Elements
-
Stay on the Page/move with text/pull on my hair
Dear friends,
I asked this question before and yet I'm still terrible problems with my graphics flies over the text document when I add more text. I'm not able to find the archives with the answers that people have written to me.
I need to write a series of laboratory reports and using a terrible time amount to try to put the images in place. I do not receive a flow of text running. Even in sections that I created, some of the images floated back up to the top of the section and are sitting there tight. I am not able to move.
Here is an example of a problem: I inserted a scatterplot and written my text. I click on the tab "move with the text." The Text wrap tab chooses spontaneously "Inline with the text. My plot is moved to the left column - but I don't want that here. I need to add a small annotation. I'm not able to merge the plot toward the Center where the function of "In line with text" does not allow this.
Basically, I try and change all the figures and plots to "Move with the text", but they tend to change to 'Stay on the Page' when I look away.
Now, I wonder if I shouldn't open a new document in layout? This way I can add all my numbers for the section of the results in place holders. But what I can combine "Text Layout" sections "Page Layout"?
I really want to go back to Microsoft Word. I would like to become proficient with Pages - and of course to learn my lab equipment!
5.6.2 pages
OS X El Capitan
MacBook Air
Thank you for your attention.
Jonelle
Today, I opened my document to
Jonelle,
Each object, with the exception of a table when it is inserted in a document of v5.6.2 Pages, has its object set to Move with text placement and its set to automatic text wrapping. To keep your images of richocheting around your document out of your control, or push a the other, visit the reorganize with the selected image tab and change skin to zero. Now you can place pictures anywhere in your body text.
Unlike Word, Pages v5.6.2 doesn't have a convenient annotation tool, and we need to position and an oblong text box that contains the annotation group - under the image.
-
Asa and Cisco ldap authentication
Hi all
I have a problem with LDAP authentication.
I have a cisco Asa5510 and windows Server 2008 R2
I create the LDAP authentication.
AAA-server LDAPGROUP protocol ldap
AAA-server host 10.0.1.30 LDAPGROUP (inside)
Server-port 389
LDAP-base-dn dc = systems, dc = local
LDAP-naming-attribute sAMAccountName
LDAP-login-password *.
LDAP-connection-dn CN = users, OU = users, DC = network, DC = local
microsoft server typebut when I test, I have an error (user account work directly to the server)
AAA-authentication server LDAPGROUP host 10.0.1.30 userid password test *.
INFO: Attempt to <10.0.1.30>IP address authentication test (timeout: 12 seconds)
ERROR: Authentication rejected: not specifiedHelp, please
concerning
Frédéric
You have the account with username 'user' in ' 'reseaux.local' and "Utilisateurs.reseau.local '?"
If so, can you check if they are two other AD domain? The bug pointed out that ASA do not support authentication via LDAP refererals multi-domain.
You might consider to using an account administrator AD in "reseaus.local" for ASA to connect to AD.
10.0.1.30> -
VCS - C cluster and Cluster VCS-E with Movi 4.6 register and call interruption
Hi all
We have VCS - C cluster and Cluster VCS-E with Movi 4.6 register and call interruptions. The point is, if the appeal or record comes from the Internet. We have the sip proxy model vcse--> vcs - c record. The strange point is, if run us in mode not cluster with only 1 vcs - c, then the call works very well or so over 1 minute. We also have findme. The call internal registered locally (VCSC) works as well) the case appears if the active VCS - c cluster and the movi has been listed in the subzone of the crossing of VCS - c
VCS versions are x.7.2.2 and tms 14.2.2
Thx for your commentsSent by Cisco Support technique iPhone App
Hi friend
The issue you are experiencing is a known limit of Jabber of telepresence. This happens when registration of the device is transmitted by proxy to the VCS control, where VCS are clusters. Probably what is happening:
-Jabber client records through the fast track to a control in the area of the highway crossing.
-L' check requires authentication
-When the customer registers again every minute (registration of SIP (re) process normal), the registration request is sent to one of the other controls in the cluster.
-The customer then completes the current record and authenticates back to the other control
-The client (Jabber) will tear down the ongoing call when there is re - authenticate registration
This problem is resolved in the current version for Jabber for iPad. The current version of Jabber for TelePresence still has this problem. Default: CSCud17952
Another user has reported the same issue. See the following:
https://supportforums.Cisco.com/message/3967325#3967325
Zachary Colton gave the answer. I simply copied his explanation and pasted here.
Paulo Souza
Please note the answers and mark it as "answered" as appropriate.
-
For Cloud SGD LDAP authentication for users and administrators
Hello.
I recently completed the installation of my new cloud of SGD 12.1.0.3 on Linux 6.4 (on a virtual machine).
My question is if it is possible (and how) to enable authentication for new administrator SGD through LDAP accounts?
We have already our VM hosts configured to allow LDAP authentication to theirs, but how to configure WHO to enable LDAP authentication even as users of server? Because users are in LDAP, they do not have a local account on the servers, and we do not necessarily want users of WHO in order to connect the servers anyway.
One of the objectives to use LDAP is that we want to allow users to have only to change their domain/LDAP password and everything else is updated.
I see that when an account is created in the OMS, the user is created in the repository of OMS database. I really want to restrict not know them to log directly in the database, but do how this is possible. Can we still use pupbld for this? Probably not...
I read the book below the Oracle documentation, but it is for SGD 11.1 and I'm under 12.1.
But the same year, he was not very descriptive about how to set up.
It sounds almost as if you had to take the decision to use LDAP for the installation of beginning of WHO.
I hope not, and I do not remember that as an option that I have installed the SGD.
Yes, you can still integrate with LDAP. Please see the documentation here
http://docs.Oracle.com/CD/E24628_01/doc.121/e36415/sec_features.htm#CJAGHGAH
EM use WLS for authentication, so everything that is supported by this version of WLS will work. Documentation received instructions for OAM/OID/HAD and Active Directory are specified.
Users can be changed to type external if they are already created in the repository with the appropriate connection name. Otherwise, new users can be created.
Also be sure to examine the external roles option, which allows you to map a LDAP group to an external role in EM by using the same name and automatically assigning the privileges required by this group.
-
Can anyone help me please with the fields required for LDAP authentication. My network administrator has sent me the following
LDAP://xxx.xxx.XX.x:389 / o = companyname? UID
Should the host be ldap://xxx.xxx.xx.x or just xxx.xxx.xx.x?
What looks like the DN? Wouldn't be just o = companyname, uid = % LDAP_USER %?
I tried a bunch of different scenarios against the LDAP test, but not luck. I checked THAT LDAP is working properly by means of other applications that use it.First, use Google for some free LDAP viewers. Those who will help a lot, and they usually work approximately 30 days before you have to pay to save them.
Then, specify the address of the LDAP server in the program, connect and try to find your information. My big problem has tried to get all understood, was that I also had to precede the domain name, something like user domain\username. Once I saw that in the LDAP viewers, and I used the same formula in my authentication routines, everything worked perfectly.
Among the free that I used was called LDAP administration tool.
Hope this helps, get LDAP working has been a huge headache until this.
Bill Ferguson
-
LDAP authentication integrated and now BAM start page is very slow to load
Hi, all ~
I have a new installation of BAM with the 10.1.3.4 10.1.3.3 applied patch.
I went through the installation of BAM and the note of LDAP integration technique guide and have been able to successfully integrate BAM with our LDAP, where "successful" means that I am able to provide my own LDAP credentials and connect to BAM.
However, BAM splash screen now always somewhere takes on the order of 1-2 minutes to load... so I guess I am wondering if there is a common cause for this kind of mistake?
Suggestions for things to check would be appreciated.
Thank you
-NathanFor what it's worth, the solution in our case was to separate the BAM (10g) of LDAP.
User administration becomes a little more manual process in this case, but BAM pages to load almost instantly to users now, while prior to some users, should be as much as 10 minutes for a page to load as a result of their record in.
Another advantage of the decoupling of LDAP is that IIS is able to make the connection integrated Windows for users, which means that users must provide a login and a password longer.
The "witch hunt" that was encountered had to do with IIS kingdoms and create connections to the BAM server after the decoupling in JDeveloper. In our tests, under IIS-> Web Sites-> default Web Site-> properties-> Directory Security (tab)-> "authentication and access control" Edit button, the following must be specified:
Check only "Login Windows integrated" and "Basic authentication".
Specify a field 'default' by pressing the selection button and choosing an appropriate area
From there, your JDeveloper BAM connection, be sure to include the domain selected in the properties of your connection.-Nathan
-
LDAP authentication TWICE - authentication by default custom and Oracle?
Hi all
I have create an application with 2 pages (including the login page). My login page customized (for example...) 101) uses the authentication scheme that is customized with LDAP authentication.
My question is...
When I put in my URL of the login page in IE. Apex always redirect me to another page of connection (it looks like the default Oracle login page). The URL is http://xxxx.com/pls/apex_dev/wwww_flow_custom_auth_std.login_page?...
After I entered the username and password, it transfers me to my custom login page. Again, I have to enter the same username and password... Can someone tell me how can I remove/disable the default Oracle login page? Because I don't want to authenticate LDAP in TWICE. I'm really grateful if anyone can guide me how to turn off in detail.
Thank you mnayThe Sessison. not valid Page in the authentication scheme must be set to 101 (from the selection list). Is it? There should be nothing in the invalid Session of URL attribute.
Scott
-
Make a movie with clips of 1080 and 4 k sources
Hi all
If I do a movie with clips of 1080 p sources (like my iPhone 6) and 4 k sources (like my GoPro) I'll still be able to export the animation to quality 4 k? Is there something specific I need to do to keep export k 4 option in iMovie available i.e. the order I add clips in the project, etc.? Will be 1080 p "blasts upward" clips at 4 k resolution?
Thank you for your help.
Miles
10.1.2 iMovie will use the size of the first element that you add to your project to determine the format of the exported movie.
See Help: http://help.apple.com/imovie/mac/10.1/#/move6ccb3330
The resolution and the frame rate of your movie project are determined by the first clip you add to the timeline. iMovie now supports 4 K video and image rates at 30 frames per second (fps). If you want your project to be set at 4K resolution, the first clip you add to the timeline should be a clip of 4K. If you want your project to be set to 60 fps, the first clip you add to the timeline should be a clip of 60 frames per second.
-
Firefox is not fully load site Barclaycard of authentication. It load regarding the demand for certain letters in my password but does not load the button 'Submit', so I can't continue with my purchase and I switch to IE8 browser to buy anything on the internet. Clues?
This has happened
A few times a week
Is a few weeks ago
Your UserAgent string in Firefox is totally messed up by another program that you have installed and Barclays does not know you use Firefox 3.6.6 - it is probably similar to IE 6.0 on this site.
http://en.Wikipedia.org/wiki/USER_AGENTtype of topic: config in the URL bar and press ENTER.
If you see the warning, you can confirm that you want to access this page.
Filter = general.useragent.
Preferences are "BOLD", a line at a time, and then select reset, right click
Then restart Firefox
Maybe you are looking for
-
WHERE can I access a solution or answer to my very recent issue?
Less than 12 hours ago, I posted a question on the tabs. I sent myself that someone answered, tried different ways... but could not access his answer! I know this isn't a question, but I want to avoid grief, that he will have to find where to leave c
-
Percentage of battery is stuck iPhone 6s
If I load it via computer or regular does not change more than an hour even... help
-
Activation of keyboard on board for model Satellite Pro A40
I just replaced a keyboard on my A40 laptop however the guy who tried to solve the prior disabled of the problem the keyboard on board part of the key was stuck causing letters consequently on screen so it allowed me to use an external keyboard, but
-
How to interpret this EL Capitan Kernel panic log
I've known of frequent (twice a month) panic the kernel over the past months. Most of the time it happened when I was faced with an address URL of Chrome and try to spent in the Safari address bar then the computer will be restarted at random due to
-
How to start the process of "NI_SystemState"?
In my Distributed System Manager, I found NI_SystemState process on one of my systems of RT. I don't know when and how the process has started.