12 c - cleaner after the failure of OEM install

OEM 12 c - Agent (AIX 64 Bit 5.3) deployment failed 3 times, but is located on the server, but does not start.

You will need to remove/clean w/o affecting existing OEM 10 g client and the rest of the Oracle homes.

Server/DB production is so downtime is not an option.

Thanks in advance for your answers!

Please see the following doc for instructions on uninstalling an agent of 12 c EM. An agent of 12 c EM has its own Oracle, so uninstall will not affect the other Oracle products on the host.

http://docs.Oracle.com/CD/E24628_01/install.121/e24089/deinstall_agent.htm#CBBJEHDI

-Loc

Tags: Enterprise Manager

Similar Questions

TestStand 2014 cleaning after the failure of a step

Hi all

I am new to TestStand, so I have a simple question that could boring you but I cannt find the solution.

In my main sequence, I say 50 steps. If a step has not the next step to executete (by deafult).

What can I do to stop the execution of the following steps if a step fails. I wish that the sequencer will cleanup directly then call the next step in the main sequence.

All mere suspicion is appreciated.

Axel

Hello

You can define the sequence of cleaning goto on the failure of the setting sequence:

Configure > Station Options > immediately Goto cleanup sequence if an error occurs

Also, make sure that the steps fail sequence on a step failed, by setting up:

Parameters of the step > step sequence of Causes of failure

I hope this helps.

Reinstall Windows XP Home Edition 2007, version 5.1 (Build 2600.xpsp_sp3_gdr.101209 - 1647: Service Pack 3) after the failure of the hard drive and without operating system installation CD?

I was using an old computer and now I have a new and I want to give the former to my nephew, but I want to wipe the hard drive completely clean, in order to get rid of personal information. I don't have the CD of Windows XP OS came with the computer. After the failure of the hard drive, how can I recover 2007 Windows XP Home Edition Service Pack 3? The computer that I'm talking about is 9 years old and is a Toshiba Satellite 1415-S173.

Hi Bobby Collas,.

You must have a copy of the installation CD without which you can not re - install the OS again.

If it were an Original Equipment Manufacturer (OEM) installation, you can restore the factory settings. Contact the manufacturer to do the same.

Could not start the automatic updates. Get an error that Windows cannot check the updates, D0000034 after the failure of the Java updates

OP: Action Center... PC problem: 1 important message

After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?

Hello Irfan,

Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate. Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me. On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers. Not the only one, I have is the product key which is one 25-alpha-numeric. I tried to enter only and does not pass. This is why I say that I can pay for help since I did not ' have the product ID. Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think? If you can get back on track, I would be very grateful and thank you once again to be a big help!

wandrinstar

Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.

Keep up the good work,

wandrinstar

Lost in My Documents after the failure of the system files

I have a (~ 6 years old), Dell Precision Workstation 360 serice XP Pro pack 3. This morning when I got up the screens show vertical bands of color. Given zero has nothing - not even the selection screen or function key boot options to enter the bios Setup. In brief - not even a partial boot - just (double) monitors show the vertical lines of color. Encryption on the motherboard could have found death I took the C: drive and plugged into one another computer (XP) via one box drive external usb. In windows Explorer I can see just about everything that I expect to see on the drive except in the My Documents folder. I don't know what should be there, but the only in My Documents is the music of my pictures of my user name and user name. The only items in these folders are the XP sample music files and images. I did a search on the entire disk for a couple of files that I know should be in My Documents, but nothing was found. Since then, I ran a virus scan using Norton Internet Security, but he found no virus. I've got some critical files on this disc I need today. Stupid me - had not saved them in a few weeks, so a lot of work is missing.

Any assistance to resolve this would be greatly appreciated.

Warren

It seems that there are file system corruption, after the failure of your hardware. Try some recovery software data (links below) or, if data is critical and expense is not a problem, don't take any chances and send the drive to a professional drive savers data recovery company.

R - Studio - http://www.r-tt.com/
Recuva - http://www.piriform.com/recuva
Restoration - http://www3.telus.net/mikebike/RESTORATION.html MS - MVP - Elephant Boy computers - Don ' t Panic!

The windows 10 ISO file will still work to upgrade my computer to Windows 7 after the date limit to install the free version?

Original title: upgrade Windows 10

I made an iso file for windows 10. I am waiting to upgrade until all the bugs are being developed. My question is: will the iso file of windows 10 still work to upgrade my computer to windows 7 after the date limit to install the free version?

The ISO will work after the date limit, but you can buy Windows 10 after the date limit, if you don't improve and activate it before that date.

Windows 10 is delivered as a service:

Windows July 10 release - build 10240

Windows Update 10 November - build 10586 (with many updates depuis.13,.29,. 36)

If you want to take advantage of the free offer, you must do so before July 29, 2016.

If you the newer versions are released before then, you can always download and install when it becomes available.

You could also install it now then download updates via Windows Update as soon as they are available.

Task of pre-required

When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader).
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

can not turn on power windows firewall after the expiry of pre-installed McAfee

Hi, I can't turn on the power windows firewall after the expiry of pre-installed McAfee, first issue of w / this time.

New pc, Lenovo Win 7 Professional.

Thank you; Ricky

Did you uninstall McAfee? If not do it first and then try to use the windows firewall.
If still a problem, run the McAfee available here - cleaning tool
http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

HP Deskjet 970Cse only prints red after the new color cartridge installed.

HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago. Any help would be appreciated.

Thank you for your help. It was a faulty cartridge. I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta). I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked! Both cartridges have dates of expiry of 2016. Glad I didn't have to spend time troubleshooting my printer.

Reinstall Acrobat 9 after the new operating system installed

Need to reinstall Acrobat 9 after the new operating system installed

If it's acrobat pro and, if you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

and activate it with your serial number.

If you have a problem dl'g, you don't follow all 7 steps.

Windows 7 will not activate with the OEM key, after the failure of HARD drive.

Hello

I was recently asked to repair my brother DELL laptop. The HARD drive failed and the system unusable. I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media. The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.

The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid. I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case. The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.

I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).

Any help would be greatly appreciated!

Thank you

Brian o '

Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:

Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->

Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - QCPVQ - KHRB8-RMV82
Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
Windows product ID: 00359-OEM-8992687-00095
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130104 - 1431
TTS error:
Validation of diagnosis:
Resolution state: n/a

Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002

Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002

OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002

OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program may Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed

Analysis of file data-->

Other data-->
Office details: {AC8177E3-D2B0-45ED-B79B-E129894262D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1225630707-1574482703-4192685535Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F804090409Time(GMT-05:00) Standard is03DELL WN09 109

Content Spsys.log: 0 x 80070002

License data-->
The software licensing service version: 6.1.7601.17514

Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
Installation ID: 004806170012218410865063155553272544088463952332351022
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: RMV82
License status: initial grace period
Time remaining: 43080 minute (s) on (29 day (s))
Remaining Windows rearm count: 3
Trust time: 31/03/2013-02:23:35

Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:

--> HWID data
Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbK

Activation 1.0 data OEM-->
N/A

Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC DELL WN09
FACP DELL WN09
HPET DELL WN09
MCFG DELL WN09
WN09 DELL SLIC
OSFR DELL WN09
SSDT PmRef CpuPm

you use an OEM SLP key that only works with the manufacturers recovery media.

change the product key to that on computers of COA

Click Start, type slui3, press ENTER.

Additional information:

Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

Dv7 want: OS after the failure of the HD install

Hello
I have a HP Envy HD dv7 and it no longer works. I came with Windows 8, but later I updated for Windows 10. I don't have a recovery CD, is it possible for me to install Windows on another free HD?
Thanks in advance.

Hello

As the machine has been previously upgraded to 10, a hardware profile (digital rights) will have been saved by the activation servers.

As long as the previous installation of Windows 10 had activated Ok after the upgrade of the 8, you just create your own installation media and perform a new installation as described in the guide on the following link. Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

Kind regards

DP - K

System cleaned after the attack of virus/malware using 6 recommended tools - 90% of the system is back to normal, but most of the options in the custom of open Control Panel!

The system was attacked by a virus/spyware. Microsoft Security Essentials has been installed after that - it found nothing after a comprehensive analysis. Malwarebytes Anti-Malware has been installed, it is the largest part of it and removed. Norton 360 has found rest. SuperANTISpyware has also been installed and this has also nothing after a system scan. Then ATF Cleaner and CCleaner were used to finish with what anyone else remaining areas may be temporary.

So right now the system is more or less fine - programs running, the internet works etc. However when I open the control panel and click on a bunch of things for example Security Center, Sound, customization etc - they open habit. You see that the cursor turns into the blue circle for a fraction of a second and then more nothing. No window opens and closes or whatever it is. Now, I assume that the pieces of the virus/spyware are still active but with all tools using the latest definitions not being not able to find anything like that, I wonder if it's just a case of something having disabled those elements and not them reactivated after cleaning. The reason why I don't think it's something malicious is also because some options such as the Windows Firewall, the Manager of devices and programs and features open and work properly. Any other malicious software would certainly avoid these access as they could help shorten.

Please help, thanks!

Hello

References to Vista also apply to Windows 7.

Make sure that system is really clean before doing this.

Follow these steps to remove corruption and missing/damaged file system repair or replacement.

Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

--------------------------------------------------------------------------

After the foregoing:

What antivirus/antispyware/security products you have on your machine? Include everything you
ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
questions.)

Search all .cpl files most will be in "C:\Windows\System32" However, you can have
others. Click on each of them at a time and see if it does not start - if so right click on it and
Rename using cpZ as the extension is is to find it. Try Control Panel - if no Dungeon of joy
try all the .cpl files. (Note that other people find other subfolders under C:\Windows should
not be judged because they are not active.)

Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and
others.

Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center,
or games in Windows Vista
http://support.Microsoft.com/kb/936686/en-us

The Control Panel window will not open in Windows Vista
http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

=====================================

If necessary:

You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
Be sure to do a good backup or three.

On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

How to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

Check with your system manufacturer that they all slightly different methods. They may have
included a recovery Partition or other methods to restore the default value. As the manufacturer of your system
We will sell you the physical disks cheaply since you already own windows.

I hope this helps. Rob - bicycle - Mark Twain said it is good.

Activation of Windows 7 after the failure of the HDD for gift

Hello

I have an old Dell Precision M70 I work to clean up to make a donation. The laptop came with Windows XP, and I've upgraded to Windows 7. I ran a utility to clean the hard drive boot and Nuke and thrown in my Windows 7 Upgrade disk. I was surprised to see that it is installed, however, the activation key for Windows 7 Upgrade is not be accepted as a valid key. I understand that it is a key to upgrade, but is it possible to validate anyway?

I could give it's feel bad to do. I would like to put this machine in fully functional form, but did not know that my upgrade product key should be rejected when I started. I have a second laptop I had intend to do the same thing with, but don't have the key of the original product.

Any advice on how to solve this key activation debacle would be greatly appreciated. I would hate for my two licenses to upgrade Windows 7 will now be useless because I don't have the original XP Activation keys. Never did.

Thanks in advance for your consideration,

Jim

Skip entering your product key Windows 7 and complete the installation.

When you reach the desktop, click Start, right-click on computer

Click on properties

Scroll down to the Windows Activation

Click the link x days before activation.

Click on the link that says: "show me other ways to activate.

Enter the product key

Click next

Select the Activation of the phone

Click Next when you enter your key page

Select your country

Click Next, call the number listed

Be sure to explain your situation to the Appeals Officer.

Provide the installation generated when ID requested by the call agent

They give a confirmation ID in return, enter it

Click next to complete the activation.

However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

or

How to activate Windows 7 manually (activate by phone)

1) click Start and in the search for box type: slui.exe 4

(2) press the ENTER"" key.

(3) select your "country" in the list.

(4) choose the option "activate phone".

(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

(6) explain your problem clearly to the support person.

http://support.Microsoft.com/kb/950929/en-us

Can not activate after the failure of the motherboard

I bought a Windows version that can be installed on 3 computers. After TWO failures of motherboard, I can't activate Windows now. When I tried to activate via phone the automated message says that I already used the maximum number of computers for the key. It's very frustrating because I had a motherboard last less than a year and a second last only a month or two. Now, my system works great but I can't activate it. It's frustrating.

Try the phone activation when you talk to a real person

How to activate Windows 7 manually (activate by phone)

1) click Start and in the search for box type: slui.exe 4

(2) press the ENTER"" key.

(3) select your "country" in the list.

(4) choose the option "activate phone".

5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.

(6) explain your question clearly to the support person.

JSF keeps displaying the old values after the failure of the Validation Phase

Hi all
I would like to ask for help to understand a given behavior that JSF indicates that the Phase of Validation fails.
I use:

-Tomcat 7.0.2
-JSF 1.2_12
-RichFaces 3.3.3

Description of the problem.
I wrote a form with input fields 4: an inputText and selectOneMenu 3. There the inputText while the selectOneMenus require no validation.
Attached to the first selectOneMenu (line 32) is an a4j tag: support, so that, whenever the change event is triggered, the list of items of the second
and the third (line 44 and 58) selectOneMenu are filled correctly (note that the agent of the inputText is ignored with the ajaxSingle attribute).
In particular, after the loading of two lists of items, the actionListener requires the value of the second and the third selectOneMenu null.
This mechanism seems to work fine until I submit the entire form without completing the text entry: as expected, JSF validation fails but if I change the value of
the first selectOneMenu again (causing a new submission), page guard showing the specified values before JSF validation failed for the second and third
selectOneMenu (note that the actionListener is still called and the values of the second and the third selectOneMenu are always forced to null).

Since I'm on a simple PhaseListener, I noticed the following: before JSF validation fails, whenever I change the value of the first selectOneMenu, life JSF
cycle always calls the get method for the second and the third selectOneMenu during the Render response Phase. In this way, JSF is able to 'see' that
These values have been set to null in the appeal Phase.
After the validation failure, JSF stop to call these getters when I change the value of the first selectOneMenu.

I hope that my explanation was clear enough, thank you very much for your help.

Kind regards
Nico

Web page

<?xml version='1.0' encoding='UTF-8' ?> 
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" 
                      "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
      xmlns:f="http://java.sun.com/jsf/core"
      xmlns:h="http://java.sun.com/jsf/html"
      xmlns:a4j="http://richfaces.org/a4j"
      xmlns:rich="http://richfaces.org/rich">

<head>
  <title>Prove Rich</title>
</head>

<body>

  <h2>Prove Rich</h2>
  
  <f:view>
  
  <a4j:outputPanel ajaxRendered="true">
    <h:messages style="color:red" />
  </a4j:outputPanel>
  
  <h:form>
  
  <p>
     Input required: <h:inputText value="#{provaProbReplyBean.inputRequired}" required="true" />
  </p>
  
  <p>
       <h:outputText value="Scegli il canale:" />
       <h:selectOneMenu value="#{provaProbReplyBean.canale}">
     
        <f:selectItem itemLabel="--" itemValue="" />
        <f:selectItem itemLabel="Profamily" itemValue="Profamily" />
        <f:selectItem itemLabel="Captive" itemValue="Captive" />
        
        <a4j:support event="onchange" action="#{provaProbReplyBean.caricaProcBanche}"
                              ajaxSingle="true" reRender="procedure, banche" />
     </h:selectOneMenu>
  </p>
  
  <p>
       <h:outputText value="Scegli la procedura:" />
       <h:selectOneMenu id="procedure" value="#{provaProbReplyBean.procedura}">
     
        <f:selectItem itemLabel="--" itemValue="" />
     
        <f:selectItems value="#{provaProbReplyBean.procedureList}" />
        
        <!-- immediately save the current value -->
        <a4j:support event="onchange" ajaxSingle="true" />
        
     </h:selectOneMenu>
  </p>
  
  <p>
       <h:outputText value="Scegli la banca:" />
       <h:selectOneMenu id="banche" value="#{provaProbReplyBean.banca}">
     
        <f:selectItem itemLabel="--" itemValue="" />
     
        <f:selectItems value="#{provaProbReplyBean.bancheList}" />
        
        <!-- immediately save the current value -->
        <a4j:support event="onchange" ajaxSingle="true" />
        
     </h:selectOneMenu>
  </p>
  
  <p><h:commandButton value="Submit" /></p>
  
  </h:form>
  
  </f:view>
  
</body>

</html>

Bean

public class ProvaProbReply {

     private String inputRequired;

     private String canale;
     private String procedura;
     private String banca;
     
     private Map<String, List<SelectItem>> canaliProc = new HashMap<String, List<SelectItem>>();
     private Map<String, List<SelectItem>> canaliBanche = new HashMap<String, List<SelectItem>>();
     
     private List<SelectItem> procedureList = new ArrayList<SelectItem>();
     private List<SelectItem> bancheList = new ArrayList<SelectItem>();
     
     public ProvaProbReply() {
     
          List<SelectItem> l = new ArrayList<SelectItem>();
          l.add(new SelectItem("Cessione del quinto"));
          l.add(new SelectItem("Credito al consumo"));
          l.add(new SelectItem("Mutui"));
     
          canaliProc.put("Profamily", l);
          
          l = new ArrayList<SelectItem>();
          l.add(new SelectItem("Credito al consumo"));
          
          canaliProc.put("Captive", l);
          
          l = new ArrayList<SelectItem>();
          
          canaliBanche.put("Profamily", l);
          
          l = new ArrayList<SelectItem>();
          l.add(new SelectItem("BDL"));
          l.add(new SelectItem("BM"));
          l.add(new SelectItem("BPM"));
          l.add(new SelectItem("CRA"));
          
          canaliBanche.put("Captive", l);
     }
     
     public String getInputRequired() {
     
          return inputRequired;
     }
     
     public void setInputRequired(String ir) {
     
          inputRequired = ir;
     }
     
     public String getCanale() {
     
          return canale;
     }
     
     public void setCanale(String c) {
     
          canale = c;
     }
     
     public String getProcedura() {
     
          System.out.println("\ngetProcedura called\n");
          return procedura;
     }
     
     public void setProcedura(String p) {
     
          procedura = p;
     }
     
     public String getBanca() {
     
          System.out.println("\ngetBanca called\n");
          return banca;
     }
     
     public void setBanca(String b) {
     
          banca = b;
     }
     
     public List<SelectItem> getProcedureList() {
     
          return procedureList;
     }
     
     public List<SelectItem> getBancheList() {
     
          return bancheList;
     }
     
     public String caricaProcBanche() {
     
          System.out.println("\nListener called\n");
     
          procedureList.clear();
          bancheList.clear();
          
          if(canale != null && !canale.equals("")) {
          
               procedureList.addAll(canaliProc.get(canale));
               bancheList.addAll(canaliBanche.get(canale));
          }
     
          System.out.println("BEFORE setting:\n");
     
          System.out.println("\nProcedura: "+procedura+"\n");
          System.out.println("Banca: "+banca+"\n");
     
          procedura = null;
          banca = null;
     
          System.out.println("\n\n\nAFTER setting:\n");
     
          System.out.println("\nProcedura: "+procedura+"\n");
          System.out.println("Banca: "+banca+"\n");
     
          return "";
     }
}

Published by: 869000 on 14.05 giu-28-2011

I think it has to do with the fact that the UIComponents use the localValue after the validation failure. This prevents values are overwritten when the re-rendering of the page, i.e. the entries keep the value defined by the user.

The solution is to manipulate the components directly in the AJAX request, when the first drop down menu is changed. Use the binding attribute to place them in your beans and clear the value directly. In this way, that it won't matter that the expression is not evaluated.

12 c - cleaner after the failure of OEM install

Similar Questions

Maybe you are looking for