12 c R1 on Windows Server 2008 R2 installation

Similar Questions

• PowerEdge 2600 and Windows Server 2008 R2 installation problem

  Hello.

  I have a Dell PowerEdge 2600 server. Here is the configuration:

  BIOS version: A14

  2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

  4 x 1 GB of RAM

  2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

  6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

  Firmware for the PERC 4/Di 2.52D

  It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

  Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

  I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

  I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

  Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

  Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

  Thanks in advance.

  The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

  • The 2600's chipset does not support ALL 64-bit processors
    http://Ark.Intel.com/products/27741/Intel-E7501-memory-controller
  • No. 6 systems are supported on 64-bit OS - not all listed here, but the 6600 lists NO 64-bit OS (8 G was the first):
    http://advisors.Dell.com/AgileWeb/iDrivematrixView.aspx
  • 2003 x 64 is not no more, which would be if 64 bits have been supported all the

  You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

  "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

  16-bit applications are not supported in 64-bit operating systems:
  http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

• VCenter on Windows Server 2008 R2 installation

  I wonder if there could be problems installing VCenter on Windows Server 2008 R2?  We also manage VMware View in our environment VSphere and plan that upgrade to the latest version.  Anyone experiencing problems with the help of Windows Server 2008 R2 for VCenter?

  We are running the most recent version of vCenter on Windows Server 2008 R2, and he's not going great.

• Windows Server 2008 R2 installs on ESXi 4

  I have a setup of ESX4 full blown at the headquarters, but we have an ESXi 4 just put us in a remote desktop (thanks to win a bunch of servers because of virtualization in the first place).

  This remote ESXi 4.0 server is for D.R. tests really, but I wanted to test the new DFS on Server 2008 R2 / branch Cache and all that jazz between the two sites.

  The problem is that the Server 2008 R2 will not be installed.  The start screen shows

  File: \windows\system32\boot\winload.exe

  Status: 0xc000035a

  Info: Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  Well, it's a processor 1.86 GHz Xeon 5120 and according to Intel, it IS 64-bit compatible:

  http://Ark.Intel.com/product.aspx?ID=27215 & Processor = 5120 & Spec-codes = SL9RY, SLABQ, SLAGD

  Heck, the original server COMES with a license for Windows Server 2003 64-bit.

  Is this a limitation with ESXi?  Should we go full blown ESX to run this?  The server is an HP ProLiant DL360 G5 server.

  Thank you!

  I forgot to mention. Enabling hardware virtualization in the BIOS may require a power cycle not only reboot.

• How to: install Windows Server 2008 R2 (64-bit) in ESXi 4.1 - 260247 with controller 'LSI Logic SAS'?

  Hello

  I have a newly installed ESXi 4.1 - 260247 on a Fujitsu - Siemens GROUND RX300 S4 with 2 x Intel Xeon E5420 @ 2.5 GHz with 36 GB of RAM.

  Storage controller is a LSI MegaRAID SAS 1078 6 x 750 GB SATA - drives configured with 3xRAID-1 logical drives. BIOS Version 4.06 Rev 1.04.2519

  Now, I'm trying to install "Microsoft Windows Server 2008 R2 64-bit" in a virtual machine, but fail because the virtual hard disk cannot be found.

  I tried with all Types of SCSI controller, but when running of the "Create Virtual Machine"-magician, he suggests 'LSI Logic SAS'. "." I tried 'LSI Logic parallel' and "VMware Paravirtual" but it did not work. However, I have not tried "Parallel BusLogic", since it clearly says no "recommended for this guest operating system".

  I was unable to find documentation on how and where I can find the "LSI Logic SAS" - pilot to be able to continue the installation. The

  Windows Server 2008 R2 installation is an ISO obtained directly from Microsoft eLicensing.

  I also downloaded the drivers floppy 'pvscsi - Windows2008.flp' and 'vmscsi.flp' from the ESXi server, but the program finds no driver validates the installation of Windows on them.

  I also extracted files "windows.iso' of the ESXi machine, but not drivers there as well.

  So my question is, what model is the "LSI Logic SAS", I guess I can download these LSI directly, I need to know what model?

  Any help appreciated.

  Thank you!

  Kind regards

  Christian

  chrkad,

  I think you have the same problem I had.   Trying to install 2008 R2 and asked for drivers?

  The issue wound up being an ISO corrupt Ms.

  Try to download the ISO using the java-based download manager.  This will tell you if your download is getting disturbed, as mine was.  It will also be the image once completed to ensure you've got the whole thing of checksum.  Just download via HTTP does not.

  I found myself in download the image of the House and burn a DVD and realize that the back of the office,

• Pavilion c 500-467: windows server 2008 display driver

  I am running Windows Server 2008R2 64 bit on a pavilion with a HP2509m monitor 500-467c. Which shows the driver works with this combination of material? I see Windows 7, 8 and 10 64-bit on the driver list, but not Windows Server 2008.  Help please!

  Hello:

  You want to try the W7 64 bit drivers for 2008 Server R2.

  Try to install the drivers manually if automatic installation method does not work.

• Definitions for Windows Server 2008

  Hello!
  I was looking for definitions of toshiba for windows server 2008, and then I realized that there are no definitions for windows server 2008.

  So if someone knows how to fix this please let me know.

  You are right. Support Toshiba doesn t Windows Server 2008 and as a result you will not be able to find any Toshiba statement associated with this OS.

• WLAN on Satellite L505-10Z PSLS3E with Windows Server 2008

  I have Toshiba Satellite L505 - 10Z PSLS3E on Windows Server 2008 and to install the WiFi driver but can't find the right installation files and I downloaded the Vista driver installation and the driver may be installed on the right but when I try to connect to wireless networks, I have * NO * CAN find any available networks despite many networks on my area.

  What can I do?

  EH it's always difficult to find drivers for unsupported operating systems.
  Your Satellite L505-10Z network card wireless Realtek 802.11 g (RTL8187B) inside, then you can try to search for the driver on the manufacturer's support page.

• Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit

  I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
  The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.

  Any ideas what this can be?

  Thank you for your comments!

  If you are looking for drivers or unknown devices anytime, once again, that could be useful:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&]

• HP Deskjet Adv 2060: Driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Hello

  I have a desktop PC remotely with Windows Server 2008 x 64.

  I tried and still can't get a driver for my HP Deskjet Adv 2060, so I can't print in my house.
  
  May I ask if there is a compatible driver for HP Deskjet Adv 2060 for Windows Server 2008 x 64. ?

  Thank you very much.

  Ryan

  Hey Ryan,

  This kind of low printers end support client operating systems only, it supports all print server OS or Citrix or RDP.

  You can find the printer specifications below, only the operating system on the system Rquiredments are supported:

  http://support.HP.com/us-en/product/HP-DeskJet-ink-advantage-3183-all-in-one-printer-series---K1/4157434/model/4157334/document/c02063036/

  Kind regards

  Shlomi

• HP Pavilion p7-1451 USB 3.0 and Bluetooth drivers for Windows Server 2008 R2

  I bought a HP Pavilion p7-1451 so I might have a machine that is affordable, yet powerful enough to put a server software development environment on (I'm a software engineer).

  It came with Windows 8, but I need Windows Server 2008 R2, I own through an MSDN subscription.  I did what I always do in these cases, re-partioned the hard drive, re-formatted and installed the new operating system.

  I have almost all devices work fine, but it still does not recognize the USB 3.0 ports and Bluetooth device.  I looked everywhere but could not find something that works.  Whatever it either from the HP site is targeted for Windows 7 or 8 and trying one of those, it tells me "your system does not meet the requirements of the operating system" and MSI publishes all the drivers for this particular motherboard (that I can find anyway).

  Motherboard: MSI MS-7778, also known under the name of: MSI 2AEO version 1.0

  BIOS: FRIEND 8.12

  Here is the list of "other devices" in Device Manager that Windows does not recognize:

  BCM20702A0

  (USB) Universal Serial Bus controller

  (USB) Universal Serial Bus controller

  Bluetooth device ID: USB\VID_0A5C & PID_21F1 & REV_0012

  USB Controller device ID: PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03

  Windows doesn't always recognize them after allowing him to look on the internet.

  I googled everywhere and I'm not getting anywhere.

  Does anyone have advice?

  Any chance that this could be linked to the BIOS?

  I'm not having any chance to find a BIOS download for this motherboard either.

  Any help is very appreciated!

  Find out!

  Use your expertise in software engineering to mod the driver for USB 3.0 to work...

  Look at the last post on the thread. You need to mod the text file... replace NTamd64.6.1.1 with NTamd64.6.1

  http://forums.AMD.com/game/messageview.cfm?CATID=454 & ThreadID = 163739

• LAN driver for Satellite L505 - 10Z PSLS3E on Windows Server 2008

  Hello world

  We hope to find a solution for my case.

  I have Toshiba Notebook (PSLS3E-L505-10Z) and installed Windows server 2008 on it, but I can't find the driver Lan for this OS. Could guide you please solve me this problem, because I lost a lot of time to research on the toshiba Web site and with no valid result realtek Web site.

  Thank you

  Hello

  Windows Server 2008 is based on a Vista/Win 7 OS.
  It s like the same situation 5 years ago. Win 2003 server was based on Win XP and all the drivers Win XP are compatible with Win 2003 server.

  If you are using Windows Server 2008, then you should try the Vista/Win 7 drivers!

  Good bye

• Setting up OS x server as a replica of MS-Windows server 2008 or 2012

  Hi people,

  Our company has an environment Active directory on windows server 2008 and server running in 2012. We recently bought a mac server to push profiles settings and updates to iOS and OS x equipment.

  When I try to configure the mac server to join a domain open directory existing as a replica of the windows server 2008 or 2012, it gives an error of incompatibility. He says: ' your server cannot become a replica of the 'example.com' because they run a no compatible version of Mac OS X. Please consult the Guide of Administration Open Directory for more information about this compatibility matrix.

  Anyone can suggest me what am doing wrong or what should I do?

  Thank you

  Rohit

  You can read in this article how to solve your problem with a domain Windows and Open Directory of a Mac

  If we need more information, do not hesitate to ask

  Leo

• Activation of Windows Server 2008 by using the button R2

  I can't activate Windows Server 2008 using the originally shipped with the X 3650 M3 server activation key. The media are labbled than Windows Server 2008 R2. Is that the key to R2 cannot be used for windows Server 2008 32-bit. I appreciate your response. Thank you

  You will need to contact your business partner where the system was purchased to to solve this problem.

• Qosmio F30 audio driver for Windows Server 2008

  I'm only running a virtual machine with Windows Server 2008 installed. The server sees my Sound Driver, but it does not recognize it and ask for driver all the time. I tried running the installer of Sound Driver from the CD, but it didn't work, said: not supported operating system. I tried a driver all over the web and I found none. Can someone help to find this driver for me or let me know it it is possible to manually install this driver?

  I will be grateful for any help.

  As you probably know that Qosmio F30 is not designed to be used as a server and general support Toshiba doesn t Server2008. All you can do is to identify the manufacturer of the sound card and try to find the driver on its support page.

  Boyfriend sorry but that s all I can say about it.