How to: install Windows Server 2008 R2 (64-bit) in ESXi 4.1 - 260247 with controller 'LSI Logic SAS'?

Similar Questions

• I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/

  I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.

  Otherwise, I'll have to use discs instead :)

  Take a look at this:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  Like to make a bootable USB with WIndows 7, take a look to use the following:

  Download Windows 7 USB/DVD tool

  http://store.Microsoft.com/help/ISO-tool

• PowerEdge 1950 impossible to install Windows Server 2008 R2 64 bit

  Server 2008 32-bit installs fine, but can not install Server 2008 R2 64-bit. When I try, I get a message indicating that a cd/DVD driver is missing. I'm new to dell servers and can't seem to understand this. Help, please. Thank you.

  99% probability that your support is bad. Try to download it again and/or check the hash, try to burn again or slower or using different software or drive or try USB.

• Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit

  I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
  The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.

  Any ideas what this can be?

  Thank you for your comments!

  If you are looking for drivers or unknown devices anytime, once again, that could be useful:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&]

• Hard drives not found when you try to install Windows Server 2008

  Hey guys and girls,

  I've spent the last 20 hours, trying to solve the problem of not being able to install windows server 2008 r2 on a new Dell server.

  My configuration is:

  Dell PowerEdge R310

  4 x 1 TB 7.2 K SATA HDD

  Controller Raid PERC H700

  I can't even install the drivers that I downloaded from the Dell support site because Windows Server 2008 Setup will not recognize them.  These factors include the Raid Controller, chipsets Intel, SATA etc.

  I used the settings default, all changed the Auto Off Ports and vica versa, I put the server in Raid and ATA mode with all the possibilities, but it will be will not detect any HD!

  Please help, as it is essential for my health, employment and mental health.

  Best regards

  Sami L.

  What OS?  What RAID controller?  How many discs?  The size?  RAID level?

  I can't assume that everything is the same, especially when you have a different system altogether which does not support the H700 (so the files would have been meaningless even if Dell had not broken links). :)

• Impossible to install windows server 2008 on virtual machine

  Hello

  I installed vmware 9 without any problems, but when I create a virtual machine and I want to install windows server 2008 on it, I see this error:

  This virtual machine is configured for 64-bit operating systems. However, the 64-bit mode is not possible.
  This host supports Intel VT - x, but Intel VT - x is disabled.
  Intel VT - x can be disabled if it has been disabled in the BIOS/firmware settings or host was not powered by bicycle since changing this setting.
  (1) check that the settings BIOS/firmware activate Intel VT - x and disable "trust execution."
  2 turn on the host if either of these BIOS/firmware settings have been changed.
  (3) turn on the host if you have not done since the installation of VMware Workstation.
  (4) update of the BIOS/firmware from the host to the latest version.
  For more information, see http://VMware.com/info?id=152 .

  What can I do?

  my laptop is vpccw27fx of sony and its configuration is

  Processor: inter (R) Core i5 M520 @2 cpu. 40 GHz 2.40 GHz

  RAM: 4G

  OS: Win7 64-bit

  I mention that the host BIOS/firmware is up to date, but I don't know how to check intel vt - x which is disable or enable. !

  Hello

  Restart your laptop and try to get into the BIOS, look for virtualization or VT - x and allow it

• How to create DSN on Windows Server 2008 R2 64 bit 32 bit

  I've created System DSN using the SQL Native Client ODBC DSN name does not invite to the screen of the database option during the installation of the VMware Update Manager utility in vCenter Server 4.1

  vCenter server 4.1 is irunning on Windows Server 2008 R2 64-bit in which SQL Server 2008 R2 is installed.

  Please help how can create 32-bit DSN for VMware Update Manager. Screenshots are attached to the post for referance.

  glance. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1010401

• ESXi 3.5 and when trying to install windows server 2008

  I installed ESXi 3.5 on my server and successfully created a first virtual computer on which I am trying to install Windows server 2008 standard. I use VMware Infrastructure Client 2.5 from a Vista machine to access my virtual machine console.

  Installation of Windows server is an ISO file located in the root directory of the ESX Server data store. Everything went well with the installation until one last server restart showed a screen stating "the password must be changed before logging on the first time' by clicking on 'OK' present a login for 'Administrator' screen, asking me to enter a password for the 'new' and 'Confirm password '.

  Any attempt to enter a new password results (up to 14 characters, mixture letter & number) in a message "unable to update the password, the value provided for the new password does not meet the requirements of length, complexity or the history of the area.

  As far as I know, I'm not usig a specific domain, have never been able to access Windows server 2008 to create an admin account. I don't know how to solve this problem. I am new to VMWare and Windows server 2008.

  Any suggestion to move forward and allow me to have access to the server via the console?

  Thanks in advance for your help, Claude

  This isn't really a problem with VMware, but more of a problem of Windows 2008 password complexity requirements.

  The account that she is not asking that you must change the password is the local administrator account.

  And you have tried in upper case, lower case, numbers and special characters?  Something like Win2008!@#$ maybe?

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

• If we have 2012 window microsoft license server can then we able to install Windows server 2008

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• We license from microsoft windows server 2012 and I want to install Windows server 2008. Is this possible?

  Hello

  If we have the license microsoft windows server 2012 and I want to install Windows server 2008.

  Is this possible?

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Install Windows server 2008 r2 blue screens before

  I try to install windows server 2008 r2 on my system and it blue screens right after that the disc is loaded in the ram.  I don't not even to the selection of installation phase. It crashes just after the windows logo charge. IM receives the stop error 0x0000001e.

  my system is as follows
  Asus rog crosshair iv formula
  processor AMD 1100 t blacke edition x 6
  16 GB of ram
  ATI radeon hd 6950 graphics card
  and several discs hard digital western
  If someone has a possible solution to this problem would be great because I won't have a chance to make it work. Windows 7, it works, boots and install perfectly on this machine, but I need to put the server on it.

  Hello

  Your question would be more by experts Windows 7 IT Pro Installation, Setup, and deployment Forum. Check out the following link.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank.

  I am trying to install Windows Server 2008. When I get to the part where I should choose where the operating system is to be installed, it is blank. He told me 'No device found drivers. We see the SATA HDD in BIOS, and if I browse for the drivers, the driver is displayed. I used the command line packaged with the installer to format the drive, just to be sure. It is formatted in NTFS.

  original title: can not select the HARD drive to install on

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• PowerEdge 2850 - trying to install Windows Server 2008 R2 from USB

  Hello

  Let me start with this: they gave me this server by a friend, and I thought it would be a very rewarding experience.

  I want to install Windows Server 2008 R2 from a USB key. I already formatted the USB drive by using diskpart and implemented the fat32 file system. Then I went on the Windows site and downloaded Windows Server 2008 R2, which is a NTI .iso file and which resulted in the new format USB key

  On the server, I already put 'Manage USB Controller - with bios' and changed the sequence of drive for the "emulated hard disk USB flash drive" at the top.

  Now on the screen of boot sequence, after the press for installation of BMC, he says ' remove disks or other media. Press any key to restart"

  What's not here? Shouldn't I see a Windows Server set up the screen? I'm not there is something very basic I'm missing, but any help is appreciated.

  Thank you!

  Remove the USB when it restarts the first time :)

• Impossible to install Windows Server 2008 64-bit edition

  I'm under ESXi 3.5 on an Intel Core 2 Quad CPU Q8200. When I try and install Windows Server 2008 64-bit edition, I get the error that the processor is not compatible. Could someone please help. Thanks in advance.

  I withdraw that.  Looks like the Q8200 don't have VT - x.  As such, it cannot run 64-bit guests.  See KB 1901.

• HP Proliant ML350G6 with windows server 2008 standard 32-bit memory system installled is 22 gb but the physical memory is only show 4095 MB

  We are facing problems of physical memory to the hp Server model: HP Proliant ML350G6 with windows server 2008 standard 32-bit.
  The memory of the system installled is 22 gb but showing physical memory is 4095 MB only.pls give me the solution for this.

  * original title - NOT of the PHYSICAL MEMORY MONTRANT CORRECTLY *.

  According to this the max is 4 GB for this version and 32 GB for 64-bit. You need to install 64-bit