12 '' MacBook bluetooth problems

Similar Questions

• 10 IOS leading to the Bluetooth problem

  Before download IOS 10, I've never known a Bluetooth problem when using my Ford truck.

  Now, when I get a call, the caller does not hear me and I can't hear the caller. If I have my phone in hand and I change the Bluetooth audio to the speaker of the iPhone or handheld and then change it back to my truck, it works very well.

  When I call my truck, using Bluetooth, all parties can hear one another, but incoming calls only on me.

  I tried to reset the network settings, non-couplage coupling phone/truck and restart the phone. Restarting seems to work for the next incoming call, and then it starts again.

  Any help would be great. I received an incoming call on my phone about 10 minutes before you download the update of IOS. The following call (update to the post), the problem is presented.

  Thank you.

  Try to get help from this article, get help to connect an accessory with your iPad, iPhone or iPod touch - Apple Support Bluetooth

• I am so tired of this bluetooth problem on my iPhone 6.  I am updated to iOS 9.3.  Anything I pair with my iPhone must be within 6 "of the phone.  What should I do?

  I am so tired of this bluetooth problem on my iPhone 6.  I am updated to iOS 9.3.  Anything I pair with my iPhone must be within 6 "of the phone.  What should I do?

  looks more like a hardware delivers then one software

• with IOS 10.0.2 - 5s iphone Bluetooth problems

  Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

  It has always worked perfectly before the 10th of IOS.

  And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

  I did:

  Forget this device for the PLT M50 and paired again (several times)

  I did a Reset Network Settings

  I don't know what else to do - but it's a 10.0.2 IOS issue.

  Hello AppleUser2k,

  Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

  The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

  If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

  Thanks again and have a great rest of your day.

• 10 IOS bluetooth problem

  Before you upgrade to IOS 10 both Iphone5s and 6 s more, bluetooth in my Nissan Murano 2013 worked perfectly. Now, pairs of thin phone and able to call but Bluetooth drops out when receive call and it happens on both devices IOS 10.

  Walks through the internet and we have tried all the recommendations to reset and re-pair the Bluetooth on the system of the car and the Iphone, but nothing helped.

  The following steps have been tried but compensate.

  1.

  -Forget pairing Iphone and car, turn off Bluetooth (reset Press Home + Power device)

  -Restart the car and re - pair again

  2.

  -Forget pairing Iphone and car, turn off Bluetooth (reset all settings)

  -Restart the car and re - pair again

  Borrowed from my friend Iphone5s who do not have upgraded to IOS 10 and paired the car and bang works perfectly.

  Someone else has the same problem?

  Hello

  See if there is something in this support article, you have not yet tried > get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

• iOS 10 bluetooth problems

  Since the upgrade to iOS 10 my Bluetooth headsets do not work properly.  I reset the network settings < and > repair devices, but the sound quality is terrible.  It starts ok but then a few minutes into the discussion, he would become unbearable for me and the person on the other line.  I never had a problem with iOS 9.

  I have the same problem with bluetooth and iphone car 7 more.  6plus iPhone with ios 10 worked without problems.  can connect to the car, but the iphone does not respond to the hands-free 2010 GMC.  When audio connects, degrades and call fails.

• IOS 6s whatsapp Bluetooth problem

  Call for help,

  6 s after having upgraded to IOS 10,

  When it is connected to the Bluetooth headset, the voice message that Whatsapp is broken.

  Disconnect the Bluetooth, stop the same Whatsapp Whatsapp to uninstall and reinstall.

  Impossible to solve the problem.

  Any expert can give me only a hands?

  Thank you all

  LJ

  Tap Settings > Bluetooth, then turn the Bluetooth off then on IT.

• MacBook Bluetooth is not available.

  Suddenly my MacBook 9.2 running El Capitan has a line winding through the bluetooth menu bar symbol, and when the cursor is clicked, it says Bluetooth is not available.  Tried to reset the SMC, by removing the Bluetooth plist file in the Library/preferences /, no joy.  That's happened this morning when turned on.

  Try resetting the SMC again. If this does not help, bring it in to test.

  Barry

• Bluetooth problems

  I have a bluetooth ear plugs. BEF day yesterday they were working fine until today, it says Bluetooth is off limits. They work perfectly well with android. Please help solve this problem

  Try the procedure described here: get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

• GPS, Wifi and Bluetooth problems

  So I have an iPhone 6 running on IOS 9.3.4 and have had problems with the GPS and the strength of wifi connectivity and bluetooth for a while now.

  First of all, the GPS.  It does not work.  When I run the maps or google maps on my device and the input an address the app can give me a written plan, location, but will not show me on a map.  He'll start road to everywhere where I go and tell me to start position, for example, to the North on the road on that I am, but the arrow does not follow me and tell me when the turn or where I am.  Occasionally, he has a message of guidance down with a spinning wheel and then, after a few seconds, disappears.  I tried to reboot my device several times, I have reset the network setting, I reset all of the settings, I backed up my phone, reset it and recovered save him.  Nothing has worked.  I was at my local verizon store and received a 'new' (its definitely refurbished) phone and the problem persists on the new phone.  I reset the phone to factory setting without content, set up as a new phone and tried the cards again, thinking it might be a problem with the back to the top.  It still does not work.  I'm perplexed right now and do not know what to do/try.

  Second, wifi and bluetooth connectivity is terrible.  I can only receive a wireless signal so that in very close proximity with the router.  I tried to different houses/companies and it is the same question.  However, bluetooth is just as bad.  I use headphones wireless, and go to the gym/go for the route with them.  I used to be able to walk around the gym without my phone and have connected the headphones, but now I can't have my phone 2 feet of the appliance without the music being agitated (bad connection).  I'm really irritated that I cannot understand this point and that he can't seem to find a fixed solution online.

  If you have just updated to iOS 9.3.4, which I didn't even know still shone, so maybe it's a bug that comes with the update. However, your problems seem to follow a trend, you can not far from a source of connection and now a signal. It is perhaps because the necessary components for the Bluetooth, GPS and WiFi signal are damaged or defective. Have you dropped or spilled liquid on your iPhone recently?

• MacBook charger problem

  I have a macbook Pro retina, mid-2012, which has developed a charging problem.

  The load is around 14% and menu of the top indicates that the load. However, light 2 MagSafe is completely turned off, and when he drops by 14%, is not increase either.

  I tried a SMC reset without success. When he starts everything first (before) the battery shows 100%, but drops to 14 percent when it is connected.

  There is no debris around the connections and cables are in good condition. Socket is very stable.

  Any idea what's going on?

  Thank you

  It looks like a SMC problem. I would try to do the reset a few times more. Back in the way to be 100% on a reset SMC is by disconnecting the battery and by him plugging. If you have a local computer, small repair shop they can-off for free or cheap.

  Best,

  Al

• early 2009 macbook bluetooth driver for win10

  Any idea on what kind of Bluetooth dongle/interface, we have in the beginning of 2009 2Gz white MacBook Core Duo?   I had to get a new HD for my aging MacBook so I decided to do a clean reinstall of OS X El Capitan and win10.

  1: first of all, did a clean reinstall of Mac OS X, made various update

  2: then partitioned the FAT partition w / Boot camp 6.0.1

  3: install win7 w / drivers 4.0.4033 Bootcamp.  (I think this is the 'new' set of drivers for boot camp for my antique MacBook.)    Updated in sp1 EXCEPT display drivers.  (Stick to the driver boot camp 4033)

  Everything seems to work fine in win7, at least when I look at the Device Manager, there is no exclamation point or something funky.

  4: upgrade to win10.  Updated for the latest updates which seems to have updated my display driver, but seems to work very well.   Now I have blue tooth is not recognised within the win10 devices.   Any idea?

  Please search for generic drivers of BT for the W10.

• Trackpad and keyboard Macbook Pro problem

  Hello

  It's been a few months that I have a problem with my Macbook Pro, indeed the trackpad doesn't work at all and the well-tempered clavier from time to time (duty to restart).

  MacBook Pro (retina, 13 inches, end of 2013)

  OS X El Captain version 10.11.5

  I saw that Apple had released a patch pour these problems: this update is recommended pour MacBook Pro (retina, 13 inches, end 2013) models. It solves a problem of non-response of the keyboard and the trackpad multi-touch integrated.

  But I can't install the update because it is no longer supported...

  Do you have a solution?

  Many thanks,

  Kind regards

  Hello. This article can help you If your Apple wireless mouse, keyboard or trackpad is not working as expected - Apple Support

• Bluetooth problems with 9.3.2

  problems of Bluetooth connectivity to car since the update to 9.3.2

  Hi Senga1958,

  Thank you for using communities Support from Apple!

  I understand that you have problems with the Bluetooth connectivity in your vehicle after updating to the latest version of iOS on your iPhone. To begin troubleshooting, I suggest to read and work through the steps in the following article.

  Get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

  See you soon!

• Bluetooth problems after upgrade to 9.3.2

  I've just updated to ios 9.3.2 and now bluetooth will not allow matching any device that requires the entry of the code because the keyboard does not find which means that you can not pair the device. You can pair if the device does not have a code.

  I first noticed that transmitting and receiving calls was broken after the upgrade on my bluetooth in my car so I decided to wipe down and re-pair phones for the car, the operation failed due to the above problem.

  Here are a few standard steps - they can help - but we are still discovering the nuances of the 9.3.2

  1. Make sure that each device you're trying to pair is in "discoverable".
  2. Control Center - tap bluetooth and turn it on again - 8 - 10 times
  3. Force restart the iPhone - after stopping applications using the app Chooser - invoked by fast double pressing the home button and drag upwards on each app until it disappears from the screen. Meet the sleep/wake and home buttons down until you see the logo  - then release and allow normal start upward
  4. Update to the latest iOS if not done
  5. Settings - general - reset - settings Reset network will need to re enter the WiFi passwords
  6. If the pencil of Apple is connected - "Forget it" and try again
  7. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  8. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.