1210 series expand type in copies

Similar Questions

• Virtual copies in LR4 - Page turn icon / copies appears do not?

  Hi, I have a problem that has arisen as of late - I'm trying to create a virtual copy of a photo, but instead of the normal page down change icon to the left and it in auto-expand to display copies, it just creates a stack and says '2' or '1 of 2' and line bars double on both sides of the preview mode grid. Y at - it a setting I changed which made? Anyone know what I did wrong? Is something I would like to get fixed

  In your clip to screen, you have the defined filter bar to display "Master Copy" only.   In this context the behavior you describe is the way it is supposed to work.  See the right corner of my screen clip below and uncheck the white box, and the desired behavior will return.

  

• Recurring Werfault.exe takes 99% CPU as

  Hello world
  I came across a problem today with Werfault.exe. He showed up and quickly took about 100% of my CPU capacity, leaving me very little to work with (Vista) at very low speed. I have high speed internet, 2.3 GHz and 4 GB of RAM.
  I went to Control Panel/System & Maint/Problem Reports and Solution/changing settings / settings advanced and disabled Windows Error Reporting for all on the network (desktop and laptop) and restarted. You know: Werfault.exe showed once again in the Task Manager.
  I went to Windows Update, downloaded everything there was to download (most non-essential), restarted, my friend Werfault.exe returned. Pretty upset had at that time.
  Tried all sorts of other things, none are effective, but you try in the hope that something works.
  Finally, I got back into the Task Manager and noticed, you can highlight an offending exe and basically have using the 'End process' button at the bottom of the page, to the right. As usual, Werfault stood in two lines and share all my processor capacity.
  For about 10 minutes, my CPU was a flexibility again after my action in the Task Manager. Then, the first Werfault came back, followed by "SearchIndexer.exe. I have seen that before - SearchIndexer after a brief period will replace Werfault.exe and we're back to square one.
  Obviously, this approach works only a very short period of time.
  It does not seem just to turn off something without going to the cause of why the 'belle' Werfault.exe arises in the first place.
  I looked at a few sites on the web, but most do not receive further that 'disable Werfault in the controil Panel settings', which I did until I saw it.
  So, I'm stuck. Windows O.S. is suffocating my computer by sending reports of Windows. Makes you think about how stubborn wrote the script for this type of help from Microsoft.
  OK guys from Microsoft, if there is someone who knows how to get rid of the cause, but also a symptom of this error, it must be you. I hope you can help me as soon as possible.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Following the advice of Christmas, I found the root of the problem rather than knock off the symptoms.

  Go to the observer of events (EVENTVWR. MSC in the search bar). You should start the Event Viewer (Local).

  Top of page is "Summary of administrative events" with a series of Types of events. For me, it shows that I had 206 errors in the last hour, 6000 in the last day... and it got worse after that.

  So, I expanded the section 'Error' and found the ad that was originally the most errors. For me, it was pretty far down the list, but he had 192 206 errors in the last hour, so I clicked on 'Application Error'. I double-clicked, and he brought me to a new page.

  The new page is a description of what goes wrong, but what you REALLY need to do is look at the first line of the large gray box. It will tell you: "Application failed BlahBlahBlah.exe" or something. Once you have a name for the author, you can search your own computer for that and see that he is related to or search the Internet.

  For me, my problem was service of nProtect netizen I picked up during the use of the internet in Korea. I guess it was panic now that I'm no longer in Korea. Then I uninstalled the nProtect service and BAM, no more WerFault.exe hogging my resources.

  Seriously guys. Look for the source. Your computer slows down due to the creation of report Windows, but this Windows error reports? Fix THIS, and you did.

• Issue of C1765nfw and Yosemite.

  Since the installation of Yosemite om my Mac, my Dell C1765nfw printer will only print single copies. If you request multiple copies, it fails with the following message:

  

  On the same network, with a computer with the Mavericks, it prints very well.

  Even at home too.

  I reinstalled the drivers.

  A kind poster on another forum gave me a temporary solution that worked for me. It's here - use at your own risk:

  1. under the spotlight of Terminal Type and then press ENTER.

  This should bring up the terminal window/program.

  2. in the Terminal type

  sudo sh - c "echo"Sandboxing Relaxed"> etc/cups/cups-files.conf"

  It will ask you your password (if you type it is hidden). After this series of type:

  sudo launchctl stop org.cups.cupsd

  After that if you are lucky, the printer driver must start working. (which he did in my case)

  If you want to revert the changes bring the terminal

  type cd/etc/cups

  type sudo nano cups - files.conf

  After that, enter your password again

  then you are in an editor that allows you to edit the file

  Remove the last line that says Sandboxing relaxed

  Press ctrl x

  Confirm by y

  then press enter to save the file

  After this question again

  sudo launchctl stop org.cups.cupsd

• Is Satellite A300 - 1 5 read SDHC class 6/4 cards?

  Satellite A300 - 1 5 supports class 6/4 SDHC memory cards?

  I tried to search it on the internet and in the user manual and specifies the SD but not SDHC cards.
  Also, I read the other satellite A300 on SDHC answers saying that it can be read.

  He also read my model?

  Hi dude

  Satellite A300 - 1 5 series supports type maps:
  -SD Card - 8MB - 2GB
  -SDHC - 4 GB - 16 GB card
  -photo - 16 MB - 2 GB xD card
  -Memory Stick - 8MB - 256MB
  -Memory Stick Pro - 256 MB - 2 GB
  -MultiMediaCard - 8MB - 2GB
  -miniSD (with adapter) - 32 MB - 2 GB
  -microSD (with adapter) - 512 MB - 4 GB
  -Memory Stick Pro Duo(with adapter) - 256 MB - 4 GB

  As you can see that there is no limitation in the type of SDHC card, but in the size of the map.
  Hope this helps you.

• Satellite A300-1EB - error message on the camera software

  Suddenly, I get an error message that t can execute cec_main.exe

  But when I checked it for camera assistant software please advise me how to overcome this error.

  My laptop is a Satellite A300-1EB

  Hello!

  In your case I would reinstall the driver and software for webcam.

  You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
  Laptop computer-online-online Satellite A Satellite-online Satellite A300 series
  Driver type: the Webcam driver

  Good bye

• MSATA for HP G6 2240sh is possible?

  Hello!

  I have a HP G6 mobile 2240sh. I would like to add an ssd, but I don't want to let hdd. Can I add an msata ssd to my laptop?

  THX

  Hello

  The following list updated December 23, 2013:

  Computers laptops & tablets with slots mSATA

  Acer Aspire: R7, V5 - 572 G-6679
  Acer: Iconia Tab W500, W700
  Alienware M17x R4
  ASUS Eee Slate EP121
  ASUS PC: S400CA, S551LB,
  ASUS Zenbook: UX21, UX31
  Dell Inspiron: 14Z (5423), 15R SE, 17R, 17R 5720, 17R SE
  Dell Latitude: ST-LST01, XT3
  Dell Precision: M4500 M4600, M6400, M6500, M6600
  Dell XPS: A 2710, 18
  Dell Vostro: 3360, 3460, 3560
  Fusion Garage JOOJOO
  Gigabyte U2442
  Google: CR - 48 Chrome
  HP Pavilion: dm4t series (DM4T-3xxx)
  HP ENVY: 15 sets (15-3xxx), 17 (17-3xxx), TouchSmart 15 t-j100
  Folio of HP: 13-1000
  Lenovo: K26, K47A, K47G
  Lenovo IdeaPad: S210, S400, U300, Y460, Y470, Y480, Y500, Y510, Y560, Y570, Y580
  Lenovo IdeaPad 13 Yoga
  Lenovo ThinkPad: X 220 X 230, T420s T420, T430, T430s, T520, T530, L420, L430, L520, L530, W520, W530
  Lenovo ThinkPad Edge: E220s, E320, E330, E420, E420s, E430, E430s, E520, E530
  LG Xnote: P330
  MSI: Windpad 110W
  Samsung: Slate of series 7, Series 9
  Samsung Chromebook series 5
  Sony VAIO: Series E, type 21
  Toshiba Qosmio: X 70, X 75-A7298
  Toshiba Portege: Z830, Z835, Z930
  Toshiba Satellite: P70, P770
  WeTab

  Source: http://www.mydigitaldiscount.com/msata-ssd-compatability-list.html

  It looks like a no.

  Kind regards.

• TBX-68 and PCI-7344 digital IO connector

  Is it possible to use this combination and what armoured cables are recommended?

  Thank you.

  The TBX-68 block uses the same connector 68 broches.050 series D-type female as the UMI-7764 interfaces.  So that all the NI SH68-C68-S cable connects to the TBX-68 and the VHDCI 68 pin compensated male connector on the 7344.  The NOR recommended cable is the 0.5 m registered under the part number 186380-0R5.

• HP Officejet 6500 E709n prints pink white and sometimes so black printing is selected

  Original title: HP Officejet 6500 E709n series

  Cannot print copies or faxes. Pages come in a pink or white light when you try to copy in black. I did a restore point back a week before it started. Has not fixed the problem.

  Hello

  1. which version of the operating system are you using?

  2 did you do changes on the computer before the show?

  Method 1:

  Try the HP Print and Scan doctor.

  See the following site:

  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146.

  Method 2:

  See the following site:

  Printer in Windows problems

  http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows.

  To install the latest drivers, download the utility software to remove the HP software and then install the most recent drivers.

  Step 1:

  Download the utility software on the site mentioned below:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3795406#N397.

  Step 2:

  You can download the driver from the below website:

  32 bits:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=3795406#N203.

  64 bit:

  http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3795406.

  Method 3:

  I suggest you to see the site mentioned below:

  Choose printing options

  http://windows.microsoft.com/en-US/windows7/Choosing-print-options.

  If the problem persists, I'd say you can get a HP support support forums listed below:

  http://h30434.www3.hp.com/t5/Other-Printing-Questions/bd-p/Printing.

• How to speed up the computer for better video quality

  The main driver is SISGR.dl

  Version 6.14.0010 3930 English

  SIS650/651/740/661FX/760 series

  Type of chip SIS760

  Hope this is the info you need

  Hello
  I suggest you try to update the latest drivers for the video card and see if it helps:
  http://support.Microsoft.com/kb/283658

  Also check out this link:
  http://support.Microsoft.com/kb/307960

  It will be useful.

• ISAPNP.sys is missing or damaged

  Tried to start my PC running Windows XP and got the following error message:

  "Windows has not start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  Restarted from Windows XP CD, you press R to start the Recovery Console.

  Followed the recommendation from Microsoft online and typed help: ren c:\windows\system32\drivers\isapnp.sys isapnp.old

  However, got error message "access denied."  When I typed C:\ > dir got the error message "an error occurred during directory enumeration.

  Don't know what the problem is.  Any suggestions?

  Thanks for the suggestion.

  I typed: chdsk /r c:

  Response has been:

  CHKDSK is checking the volume...

  CHKDSK performs additional checking or recovery...

  CHKDSK performs additional checking or recovery...

  CHKDSK performs additional checking or recovery...

  25% completed

  The volume seems contian one or more unrecoverable problems.

  ... any other suggestions?

  Windows XP to replace the Isapnp.sys in Windows XP file, follow these steps:

  1. Start the computer from the Windows XP CD.
  2. In the Welcome to Setup screen, press R to start the Recovery Console.
  3. If you have a dual-boot or a un ordinateur computer to multiboot, type the number corresponding to your Windows XP installation when you are prompted to select the installation of Windows to open a session and then press ENTER.
  4. When you are prompted for the administrator password, type the password and press ENTER.

     Note If the administrator password is blank, just press ENTER.

  5. At the C:\Windows prompt, type the following command and press ENTER:
     ren c:\windows\system32\drivers\isapnp.sys isapnp.old

     Note The steps in this article assume that you installed Windows XP on the C: drive. The actual location of your Windows installation may vary.

  6. At the C:\Windows prompt, type the following command and press ENTER:
     Expand cd-romdrive : \i386\isapnp.sy_ c:\windows\system32\drivers\isapnp.sys

     For example, type:

     Expand d:\i386\isapnp.sy_ c:\windows\system32\drivers
  7. After the file is successfully expanded, type exit and press ENTER to quit the Recovery Console.
  8. Restart the computer.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Beaches of dynamic chart

  Hello

  I am trying to create a graph where the two axes are dynamic.

  Using the formula

  = "More_Charts!" & INDEX (Z168:Z179, MATCH (EOMONTH(A1,0) will GET (DATEVAL (INDEX ('assessments (storms Excl.)'! F:F, MATCH (I156 "Assessments (storms Excl.)"! (((Header, 0))), 0) + 1, J3:V3, 0), 1) & "163:"& INDEX (Z168:Z179, MATCH ('assessments (storms Excl.)"!" J3, J157:U157, 0), 1) & "164".

  (NOte: cell I156 is a Validation containing the list of places which, once changed updated the formula above with address references)

  back in the cell W173

  More_Charts! J163:S164

  Which is exactly what I want, very well!

  I then create a name of beach called Chart_data that, once created using:

  = INDIRECT(More_Charts!$W$173) where More_Charts is the name of the worksheet. So far so good!!

  Now, when I insert name define, click on the name of beach, it highlights in blue the range reference.  Once again, well.

  So finally, I then create a chart in curves and the value of the series, I type the name separated by a BM! then type the name of beach that resembles "Charts_WB.xlsm"! Chart_data

  When I click OK I get the message "the reference is not valid. References for titles, values or sizes must be a single cell, row and column. »

  I understand it is the range has not been recognized, but after testing it in the manager name and seeing valid (IE cells are highlighted when I select the beach), I do not see where I am going wrong.

  Any ideas would be greatly appreciated.

  Thank you

  John

  Here, the assumption is that you are looking for help with Excel, even if you identify in your message.  You should post in the forums of Excel for the best answer.

• WLC-4402 boot failure

  I had unplugged the controller to move, when it was reconnected and started it back up it comes up with the following output.

  Bootloader 4.2.61.0 (October 24, 2007 - 19:31:59)

  Motorola PowerPC ProcessorID = 00000000 Rev PVR = 80200020
  CPU: 833 MHz
  BCC: 333 MHz
  DDR: the 166 MHz
  LBC: 41 MHz
  L1 Cache of 32 KB L1 cache I have activated 32 KB.
  I2C: ready
  TNT: 1 is 24 c
  DRAM: DDR module detected, total size: 512 MB.
  512 MB
  8540 in host PCI Mode.
  8540 is the arbiter of the PCI.

  Test RUN of memory

  FLASH:
  Flash Bank 0: portsize = 2, size = 8 MB in 142 areas
  8 MB
  Permit of L2 cache: 256 KB
  Map Id: 1540
  The ID of the revision of the map: 1
  CPU Id card: 1287
  Number of MAC addresses: 32
  Number of supported housing: 4
  Serial number: FOC1148F086
  Unknown command Id: 0xa5
  Unknown command Id: 0xa4
  Unknown command Id: 0xa3
  Manufacturer ID: 30464
  Unchanged at edge: 00
  Number of supported access points: 50
  In: serial
  Out: serial
  Err: serial

  .o88b. d888888b .d8888.  .o88b.  .d88b.
  Y8 d8P ' 88' 88' YP d8P Y8 Y8 .8P.
  8 p 88 ' 8bo.   8 P 88 88
  8 b 88 ' Y8b. 8 b 88 88
  Y8b d8.88.   DB 8 D Y8b d8 'd8 8B.
  "Y88P" Y888888P '8888Y""Y88P""Y88P ".
  Model AIR-WLC4402-50-K9 S/N: FOC1148F086
  NET:
  PHY DEVICE: Found LXT971A Intel PHY to 0x01
  FEC ETHERNET
  IDE: Bus 0: OK
  Device 0: Model: STI Flash 8.0.0 Office: 17/01/07 Ser #: STI1M9F407290174826
  Type: Removable hard drive
  Capacity: 245,0 0.2 GB (501760 x 512)
  Feature 1: not available

  Start the main Image...
  Now press for additional startup options...
  bzImage Image integrity check Failed (Bad Header Checksum). Suspended

  I also tried to select all other boot options, but doesn't matter which option I choose that it comes up with

  bzImage Image integrity check Failed (Bad Header Checksum). Suspended

  I guess that the CF card has got corrupted, I put the card in a reader to a PC, and it shows the partitions containing the bzimage and initrd files.

  Anyway to get the boot from image files and move a new CF card? I have this very long controller (product used for laboratory usage) would hate having to shell out money for another if theres is a way to recover.

  UPDATE: I was able to get the controller will once again replaced the module of RAM embedded. Part numbers that were on the module showed as a PC2700S DDR 333 MHz SODIMM 512 MB. Got some memory corresponding to these specifications and it starts right now. His ideal summer for two weeks of work. Looks like the memory known problem was the problem after all.

  You could hit this problem here: http://www.cisco.com/c/en/us/support/docs/field-notices/637/fn63770.html

• Recommendation of the sound card to install inside on my Dell desktop computer

  Hi all

  I got the card from his Creative Audigy 2 SB installed in my PC desktop Dell Dimension original (plug in my profile), but after 8 years, it Kinky and I replaced it with a 2nd hand Creative SB PCI128 (Ensoniq ES1371) sound card for USD$ 15. However, the sound quality is so much poorer, I don't think I can live with that.

  I went to the fair of information TECHNOLOGY, but the new sound cards seem to cost a lot.

  As I am able to get second hand sound cards, can you recommend I buy? Is there anything else I should be looking? All cards sound is of the same size? My turn still has plenty of space/slots I think.

  I can be able to get good deals on second hand sound cards, if I knew how much I should pay and what I'm looking for. My budget is USD $50 for a good map its second hand. Is - this unrealistic?

  Thank you

  Nellie of Singapore

  Always include your PC model number and the operating system on any position of the initial problem.  Your profile is not where to post this.

  There is no new model SoundBlaster PCI sound cards available.  The Audigy 2 If is the single new SoundBlaster PCI sound card.

  The Dell supplied Audigy 2 soundcards that were provided were model cards "Audigy 2ZS.  You can get a used one of the same model.  e bay listings used Audigy 2ZS sound cards and the other SoundBlaster Audigy series PCI type sound cards (don't you not a PCIe type).  They are mostly under US $20.

• Keyboard CODE for X 201?

  Hello

  Some time ago there are three different suppliers of keyboards for ThinkPads and you may change if you like one better than the other. Is it still possible to get a NMB keyboard if I buy an X 201? Or are there other suppliers of these days?

  See you soon!

  Dag

  NMB and Chicony are the only suppliers of keyboard to the X20x series.

  Search for parts

  By clicking on the link above and seizes the series and type of machine you have, you will be able to know what keyboard you get.

  NMB (T 42, 3671)
  Chicony (42T 3737)

  While NMB is supposed to be the best overall, it seems that there are flex problems with them in the X20x series. A little research in these forums will tell you, but I don't know if the issues of flex on NMB keyboards has been fixed.