TBX-68 and PCI-7344 digital IO connector
Is it possible to use this combination and what armoured cables are recommended?
Thank you.
The TBX-68 block uses the same connector 68 broches.050 series D-type female as the UMI-7764 interfaces. So that all the NI SH68-C68-S cable connects to the TBX-68 and the VHDCI 68 pin compensated male connector on the 7344. The NOR recommended cable is the 0.5 m registered under the part number 186380-0R5.
Tags: NI Hardware
Similar Questions
-
Connection of a drive motor for the FSP Yaskawa Sigma with UMI-7774 and PCI-7344
Hello
I have PCI-7344 and UMI-7774 I want to connect to this of Yaskawa Servo motor control.
(1) how will I know if this drive is compatible with the pci-7344 and umi7774?
for example: inside the UMI manual is written that the engine must support "Sinusoidal Commutation"
I look at it the drive motor manual and I can't find anything about.
It's link to the drive motor:
http://www.Yaskawa.com/site/products.nsf/products/servo%20Amplifiers~fspsigma.html
(2) how to connect lines of control and feedback from the UMI to the engine?
I enjoy all the help showing a link to a tutorial that allows to understand signals from the motor and encoder
And also the umi-7344 (Phase A, Phase B, Hall sensor, inhibit, breakdowns, etc...)
Some powerpoint or Pdf tutorial for National instruments will help as well.
P.S. I read the manual of the UMI-7774 and pci7344 manual, but I'm not yet understand what I need to do
in order to configure my system of movement:
By car (Sigma FSP Yaskawa) PCI-7344, UMI-7774, motor, servo (Yaskawa)
Thanks for any help.
Kind regards
Moti
Dear Moti,
At this point I recommend contacting National Instruments of support here. You can send a request by e-mail and once a technical support representative has responded, you can attach to your document. Don't forget to categorize your request like vision or movement associated with, and I or one of the members of my group will be able to help.
Best regards
~ Nate
-
HP Pavilion g4: HP has no Audion and PCI device driver
My phone has no audio. Need a driver for the device in PCI and PCI Simple Communications Controller. Can someone help me? Thank you very much...
My laptop is HP Pavilion g4 and Im using OS 64-bit of Windows 8.
You are the very welcome.
Here are links to the drivers you need...
Audio. Install and reboot the PC.
This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.
File name: sp59649.exe
PCI device:
This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.
File name: sp58518.exe
PCI Simple Communications controller:
This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.
File name: sp58516.exe
-
dc7800mt: dc7800 10 Windows 64 b PCI Simple Communications and PCI Serial Port drivers missing
Can't seem to find the drivers for a dc7800 upgraded to Windows 10 64 b for PCI Simple Communications Controller and PCI Serial Port devices. Any help would be greatly appreciated. Paul_Tikkanen, are you still there?
Hello:
Yes, I'm still here, and Yes, I know what drivers you need...
You need this for the PCI of Simple Communications controller:
This package contains the device driver Intel Active Client Manager Host Embedded Controller Interface (HECI) for desktop models and operating systems supported.
FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46137.exe
PCI serial port:
This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.
FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46134.exe
And let me give you a bonus tip... Install the audio driver Soundmax ADI W7.
I found that works much better than W10 installed.
You install it, then select multistreaming in adi Control Panel, restart again and go to manage audio devices in the Control Panel, and then select the PC speakers, but of course install the W7 audio driver is optional, and it is up to you...
-
How to set up breakpoints with a with a PCI-7344 linear position sensor
Hello
I'm trying to implement an algorithm of scanning for a piezo Nanonics 3D scene, who should synchronize with a card counting (PCI-6602) using breakpoints on the movement card (PCI-7344). The Nanonics Stadium has two position sensors (just for x - y) gives me a linear voltage variable according to the position. Nanonics connected these sensors for the two first entries analog motion motion card connector.
Now I intend to use breakpoints to synchronize the digitization step to a card counting (probably using a RTSI cable), but I got the impression that this can be done by using the entries of each individual axis encoders, no do not using the analog inputs. Could someone comment on that? Explanations or advice would be greatly appreciated, thank you very much.
Kind regards
DFD
Hey, DFD,.
I believe that the answers to your question.
Kind regards
A. Zaatari
-
Hello
I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.
Any ideas, please?
Hello
I did a system image (drive C :) and a rescue of dvd of Windows 7) Cool, it uses a Volume Snapshot.
Then, I installed the Vista 64 bit drivers successfully.
The drivers are:
-ENE PCI Memory Stick Card Reader Controller-Card Secure Digital ENE PCI / MMC Card Reader Controller
-AuthenTec Inc. AES2501A (fingerprint)
-Trust Webcam 15007
Unfortunaly, the imprint does not work. I thnik my fingerprint is not compatible with the new Windows Biometric Framework (http://windowsteamblog.com/blogs/windows7/archive/2009/01/08/windows-7-puts-it-s-finger-on-enhanced-biometric-support.aspx)
Thank you all, bye.
-
ENE PCI Secure Digital / MMC Card Reader Controller does not
ENE PCI Secure Digital / MMC Card Reader Controller does not
I suggest that you go the manufacturer of your computers website and search for drivers chipset update.
Click Start, type: Device Manager
Press enter on your keyboard
Click with the right button on the controller listed in the tree view of the devices
Click on uninstall
Restart your computer and let Windows redetect.
-
Optical Audio Jack on a pattern common Airport Express (model A1392, purchase of 2015) - digital optical connector/adapter is necessary? My stereo has a TOS connector, but I'm not familiar with the analog/optical socket on the side of the airport. What type of cable connector does?
It's called a mini-TOSlink. It has the same dimensions as a headphone jack 3.5 mm, but it is simply a small tube. You can buy adapters to the mini jack to the TOSlink Jack standard to stick on the end of a normal wire, or lead with a type at each end. Some equipped trails a couple of detachable adapters provided.
For example:
-
HP15-ac042tu: Ethernet controller and PCI Simple controller drivers required
Installed the Ethernet and PCI Simple Communications Controller controller a certain number of times, but the error message in the device rest Manager again. Could someone please help me with the correct links for drivers for my laptop HP15-ac042tu.
Hello:
I'm glad you have the ethernet driver.
You need the driver for the wireless card that your laptop is.
You will also need this bluetooth driver...
http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149898_1
-
HP DC7700p PCI SIMPLE COMMUNICATIONS CONTROLLER AND PCI SERIAL PORT
Hello
I have a HP DC7700p Office for work that is missing, PCI SIMPLE COMMUNICATIONS CONTROLLER AND PCI SERIAL PORT DRIVERS for WINDOWS XP PRO MISSING. CAN SOMEONE HELP ME TO DOWNLOAD THE DRIVERS. I ' M RUNNING WINDOWS XP PRO ON THIS MACHINE.
THANKS IN ADVANCE
SERIAL PORT PCI: PCI VEN_8086 & DEV_2997 & SUBSYS_2801103C & REV_02\3 & B1BFB68 & 0 & 1 B
PCI SIMPLE COMMUNICATIONS CONTROLLER: PCI VEN_8086 & DEV_2994 & SUBSYS_2801103C & REV_02\3 & B1BFB68 & 0 & 18
Hello:
Need the driver of the amt for devices...
-
Wireless, lan usb and pci is not installed
Hi, I just bought a new g001sx 15 HP and installed Windows 7 Professional 64 bit. After you install the operating system of my lan wireless, LAN, USB and PCI devices is not installed, I don't know what to do. installing drivers atheros already tried and it didn't work. I have already inserted an image that shows that some of my drivers are not detected. Thanks in advance.
Hello:
Here are links to the drivers you need...
First install the amd chipset drivers and reboot. You want the first file on the Web page.
This will install the smbus and usb 3 controllers.
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
Then, install the beta amd radeon catalyst graphics driver.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...
Ethernet controller: DL and install the 2nd driver on the list.
PCI device: DL and install driver 1st on the list.
In order to provide me with the wireless driver which you are interested, please do the following...
Go to Device Manager and click on the network controller needing drivers.
Then click on the Details tab at the top of the control of the network window.
Now, you see a drop-down list of property and it is set by default to the Description of the unit.
Drop down on it and select the second item in the list (Hardware ID).
After the first string of characters that start with PCI\VEN.
-
Problems with the Ethernet controller and PCI Satellite L30-10 X device driver
HelloW!
Sorry for my bad English, I'm from the Russia.
A few days ago, I bought Satellite L30 - 10 X with W Vista on board. In my opinion, that this OS does ' t very good on this computer, so I install W XP.I have some problems with drivers. At first, I don't know which model I have: PSL30 or PSL33? I have download all the drivers for the two models. But after installation, computer doen't find the drivers for the Ethernet controller and PCI device...
Hello
Satellite L30-10 X belongs to the series of PSL33E. This number located on the label on the bottom of the device!
You must choose this number in the form of driver download for XP compatible drivers.
I put t know why you are not able to install the LAN driver. I have the same laptop with Vista and I've install the XP and all the drivers will work perfectly.I assume that you have installed the drivers in the wrong order. Please take look in the Toshiba installation instructions txt file. In this order, install the driver! This is important.
I think that you should install XP again to ensure that the registry clean, then download and install the XP drivers compatible as mentioned in the installation instructions file.
Good luck
-
Photon counting using Photon unique cash Module and PCI-6602
Hi all
I am currently working on program couting of photons using a single (Excelitas) and PCI-6602 photon counting module connected to the BNC-2121.
I took a glance at other positions, but I still couldn't solve my problem (or, again, I'm not sure if yes or no, the problem is the specification of the material).
In the program, I'm generates a trigger to 1 MHz pulse using a trigger in a separate loop.
Other than that, I have loops of the producer-consumer model to get data and do a simple subtraction to calculate the number of photons in 1 microsecond.
According to the values connected to 'Input.BufSize' of buffer DAQmx and "Samples per channel" DAQmx calendar, I could change the loop number that the program has done its job correctly.
With the values, the program acquires photon 1 MHz with signls for 139 times.
After that, the program stops and the loopback number increases very quickly.
When I forcifully took stop the program, while the loop number increases very quickly, the program appears "error-200141".»
The error that says "data has been replaced before it can be read by the system." Mechanism of data transfer is interrupted, try to use DMA or USB in bulk. Otherwise, divide the input signal before taking the action. "even if the meter explicitly works in DMA mode by using the sample clock.
I wonder there is nothing that can solve my problem or even the only solution will buy a better Board of counters/timers.
Thank you all for reading this.
I will be very happy with any index
Kind regards
Myeongsu
Yes, the same thing happens on my system.
It does not happen with PCIe-6612.
I found more strange things:
When I start to reduce the frequency at a time given (800kHz) can fill the buffer, it will not start since the beginning of the buffer. He can go to the beginning of the buffer only at 100 kHz for my PC.
Options to fix:
(1) PCIe-6612. Seems to work. I tried streaming at 10 MHz, 5 min - fine.
(2) reduce the frequency of the pulse. If your laser supports 100 kHz, you're fine.
(3) put in place additional synchronous counter at 100 kHz. Basically, it's material average number of photons by 10 pulses.
(4) read 2 adjacent pulses each 1/50 kHz - then your data transfer will be 100 kHz and you will get the number of photons of this impulse of the 20 - th.
Programming issues:
(1) remove the display of the received picture, make only the processing of data and show results if you really need it.
(2) clock.vi sample sets the buffer size, if you specify the size of the buffer, do this after this vi.
(3) I deleted unnecessary "loop generation." He is running on the hardware and stops when you stop it - after reading the loop ends.
-
Serial port PCI and PCI Simple Communications Controller
Hello!
My computer OS is Windows 8.1.
I just shearch something and I found that... I don't have serial Port PCI and PCI Simple Communications Controller. (Unintalled)
Serial port PCI-> VEN_8086 & DEV_29B7 & SUBSYS_2819103C & REV_02\3 & 21436425 & 0 & 1 b
Controller PCI Simple Communications-> VEN_8086 & DEV_29B4 & SUBSYS_2819103C & REV_02\3 & 21436425 & 0 & 18
Sorry for my English. But can anyone help me?, where I can download these files.
Hello:
Here are links to the drivers you need...
Install PCI Simple controller Comms
Install PCI Serial Port:
-
Looking for a driver for a HP 250 G3 laptop
Device PCI and PCI Simple Communications controller drivers
OS: Windows 7 Home Premium (64-bit)
Impossible IM find thank you for giving the link.
Thanks in advance
Hello:
When the G3 250 support site returns to the top...
You need these drivers for devices...
Realtek card reader driver (under the section storage drivers)
Driver Intel Management Engine Interface (under section chipset)
Maybe you are looking for
-
Apple ID lockout - HELP Please
Hoping someone can help me find my iPad old dads for him. I managed to fix it for him after he threw it on the floor using google/here, but I could not sign in its identifier Apple at the time that he does not accept the email address, that he insist
-
Search bar is pre-populated with the homepage
When I change my homepage to google - the address bar comes always pre-populated with the 'https://www.google.com/?gws_rd=ssl' which means that as soon as I start typing it adds this url. I just want to have an own address with new tabs bar, so I can
-
I think I might miss some key information, because at this moment, I download my updates twice, once on the iPad and once in iTunes. Basically download on the mac is unnecessary, because they yield no more during the synchronization process. The only
-
Satellite U400 - fan is always on in Windows
Hello I have the same problem on U400. Tried what MasterG suggested but it did not help... I've got dual boot Windows 7 pro / Ubuntu 9.10 into Ubuntu fan starts when the temperature is more work then 69 ° C and stop at 55 ° C. But in Windows, tempera
-
How to enable virtualization in the BIOS of the Satellite M100?
In order to allow VMX for use by computer Xen does not only have a VMX capable chip, the computer must also have a BIOS that supports. When I am tempted to use virtualization on my Satellite M100, I get the message:(XEN) CPU0: VMX disabled by the BIO