13 - b080no: the HP 13-b080no upgrade

Similar Questions

• Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

  HII!

  IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

  The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
  They will return the laptop for windows xp or from my laptop has another operating system they will not work?

  Also...
  What's the deal with BIOS? : S
  I don't understand!
  If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  As I download the new drivers before upgrading Yes?

  Thank you!

  The restore CD will of course work.
  The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

  > What's the deal with BIOS? I put t understand!
  > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

  Some series Satellite A200 needs a BIOS update if you want to use the XP.
  In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

  Best regards

• Why can't I download the 9.3 iso upgrade? He always tells me that I am not connected to the Internet and I know that I am.

  Why can't I download the 9.3 iso upgrade? He always tells me that I am not connected to the Internet and I know that I am.

  Apple withdrew temporarily updating iOS 9.3 for devices more old to deal with some issues, what he was creating. Better to wait a few days for them to correct problems.

• RAM upgrade problem: Flash the BIOS? or upgrade the processor?

  Hi, I jumped in with both feet and now need help to get out me!

  I have a desktop PC HP Pavilion Elite HPE-470uk who becomes a bit slow (processor card here http://ark.intel.com/products/48505/Intel-Core-i3-550-Processor-4M-Cache-3_20-GHz). After you have added a bluray player that I noticed that it's getting a bit slow so thought I would add little RAM.
  

  I bought a few Hyper X8GB of HyperXbeast 1600hhz, slipped in and the PC did nothing but to turn on and off several times. I checked the two sticks and they both do it. I then (plow in front) checked what memory, the processor can handle and discovered "The Intel® Core™ i3 - 5xx / Intel® Core™ i3-21xx processors handle memory DDR3 1066/1333 MHz" by http://www.intel.com/support/processors/corei3/sb/CS-031175.htm

  After a discussion on another forum, that it has been suggested that I have updated the BIOS because it can allow the processor to manage memory 1600 mhz, but I don't know where to start on this or what version to selected download. I'd appreciate any help you can offer on this.

  The other way, that I can see is to update the processor itself. I thought of nothing too fancy just an i5 because it will allow me to run 3d blurays and should allow me to run some apps at the same time. After reading this http://m.wikihow.com/Upgrade-a-Processor it seems too complicated. Is it really just a matter of taking off the fan, declipsant the old processor, nine droping in and then put on some cooling stick stuff?

  Or should I just return the memory and get good memory?

  See you soon

  Atdot.

  Here are the specifications of original factory for your desktop HP Pavilion Elite HPE-470uk and its card mother MS-7613 (Iona-GL8E). Based on these specifications, this model can support up to 16 GB (4 GB x 4 DIMMs) as follows:

  Dual channel memory architecture
  Four DDR3 DIMM sockets (240 pin)
  PC3-10600 (DDR3-1333)
  PC3-8500 (DDR3-1066)
  Memory non - ECC, unbuffered
  Supports up to 16 GB on 64 bit computers

  In addition, this model can support the following Intel processors;

  Maximum frequency of the processor of the heart < = 2.93GHz
  Intel Core i7 - 8xx (Lynnfield core)
  Intel Core i5 - 7xx (Lynnfield core)
  Intel Core i5 - 6xx (Clarkdale core)
  Intel Core i3 - 5xx (Clarkdale core)

  If you do not have to worry about the update of the BIOS, there is no updates available for your computer BIOS. Honestly, I return the incorrect memory and upgrade to a minimum of 8 GB of RAM. Then, if it solves all your problems, you could also upgrade the processor.

  As the computer is nearly 4 years old, you can consider a factory HP restore to return the computer to a facoty as State. In many cases, it returns original full speed of the computer. The reason why this helps, because the BONE is swollen and clogged over time.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Satellite Pro A300 - will be lost the warranty if I upgrade the RAM?

  Hey guys,.

  I wanted to know if I purchase and install my own module SO-DIMM RAM in my laptop, it will void my warranty?
  If so, how can I spend my memory?

  I agree with Akuma.
  You will not void the warranty if you upgrade the RAM.
  I've also updated my RAM and I t has not had any problems with my warranty.

  Moreover, the best RAM for upgrade is the RAM even if you as before. I mean the manufacturing and specification. So you can ensure that the new RAM will work.

• The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program

  I try to use the Microsoft Office tool that implement an MSI for 64-bit Office 2010 installation file.  The tool works file and creates the msi file.  I get to the tool by going to the x 64-bit folder on the office 2010 installation disc.

  I install a new virtual machine from Windows 7 and tried to use the MSI file to install office 2010 and I get the error:

  "The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program"

  If I just click Setup on the office 2010 dvd he moved very well on the same VM window7.

  Does anyone have an idea how do to understand why the windows installer keep fails or what he wants?

  If I click on the msi even on a system with office 2007 is installed, I get the same error.

  Thanks for the help

  jbabe

  Windows Update has nothing to do with the upgrade or installation of Office 2010. Please post future questions in this forum: http://social.answers.microsoft.com/Forums/en-US/officeinstall/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error message "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program."

  Original title: cannot install WMP11, update rollup 2

  I'm still on WMP 10 for a reason, and I wanted to connect my PC with 360 videos. I downloaded the update, but he told me to go get the Update Rollup 2 or something, so I tried to install it and he told me that I needed to go get the .NET framework 1.1 and .NET framework 1.1 SP1. I went to download them and install them, but he tells me that "the upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded is may be missing or the upgrade patch may update a different version of the program".

  I Googled, tried of all kinds, uninstalled SP3 and tried and nothing.

  Hi xelliotx,
   
  I suggest that you follow these steps.
   
  Step 1:
   
  First of all, download and install .net Framework Cleanup Tool to remove selected versions of the .NET Framework on your computer.
   
  Step 2:
   
  Manually install the versions of Microsoft .NET Framework below:
   
  Microsoft .NET Framework Version 1.1 redistributable package
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en
   
  Microsoft .NET Framework 1.1 Service Pack 1
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en
  Once this installation is complete, try to install the other required software and check.
   
  See also:
   
  Error message when you install an update for .NET Framework 1.1 or the .NET Framework 1.0: "the upgrade patch cannot be installed by the Windows Installer service.
  http://support.Microsoft.com/kb/940332
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions?

  Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions? It seems that microsoft Web sites send me in circles. Patches do not work either.

  Hello
   
  1. What is the error code / message that displayed when you try to install updates for your Windows Xp Service pack 2 computer?
   
  2. What are the steps of troubleshooting that you already tried?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Steps to take before you install Windows XP Service Pack 3
   
  http://support.Microsoft.com/kb/950717
   
  Step 2
   
  Cannot install Windows updates
   
  http://support.Microsoft.com/kb/555461
   
  see, http://support.microsoft.com/kb/906602
   
  Method 2
   
  If you still face problems, please start your computer in a clean boot to avoid conflicts with security and third-party software conflicts and try to install updates.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  I hope this helps.

• Disable the Win 7 Ultimate Upgrade before installing on another computer?

  Hello

  I have a HP Pavilion dv5 the cam, e with Win 7 Home Premium. I'm walking the OS for Win 7 Ulitimate.

  Now, I'll sell the dv5 and want to install the Win 7 Ultimate Upgrade on another computer. I need to disable the Win 7 Ultimate license upgrade, or do I just restore the dv5 back to factory condition using the recovery disk.

  And then just install the Win 7 Ultimate Upgrade on another computer?

  You are the very welcome, Mike.

  If you obtained a retail product key, you should be able to install W7 Ultimate on any other PC.

  If you don't have a Microsoft account or a link where you can download W7 Ultimate once again, then you can get it here...

  2147483647 English Windows 7 Ultimate x 64 X 17 - 59465.iso of http://msft.digitalrivercontent.net/Win/X17-59465.ISO

  Then use this tool to transfer the ISO to a flash USB 4 GB or DVD drive.

  The tool also performs the bootable media.

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Make sure that the size of the ISO file you get is that the download site indicated that it was.

  Sometimes the download says "complete", but it wasn't and you end up with a partial file, which will not work.

• I need the path necessary to upgrade to windows xp home edition office2000.

  I need the path necessary to upgrade to windows xp home edition office2000.

  Please see: Description of the Windows XP Upgrade Advisor Carey Frisch

• Recurring message after the unsuccessful Windows 10 Upgrade

  After trying in vain to be upgraded to Windows 10 Friday (7 times) I have now the ridiculous situation that apparently I have to restart my computer to install the important updates - after I restarted my computer several times with the same stupid message left on my computer and asking me to reboot that I can not get rid of I am ticked off more and more with the process of useless upgrade Microsoft which has) (1) private (2) me and me to the free update with these stupid garbage "restart your computer.

  Please tell me how to fix this stupidity.

  Original title: upgrade Windows 10

  Hi thanks for your response. Fortunately, I did a complete backup of my system before I tried to do the upgrade of Windows 10 - after doing a complete restore of the system the problem is resolved and Windows Update now works normally. I can only conclude that the upgrade process has problem!

  Thanks for your help.

  Concerning

  Colin

• What is the best way to upgrade Windows 7 Professional to Windows 7 Ultimate

  What is the best way to upgrade Windows 7 Professional to Windows 7 Ultimate to load the language packs?

  Hello
  Welcome to the Microsoft community. Sorry for the delay in responding.

  Please take a look at this article for more information on the upgrade to Windows 7 Ultimate.
  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade but now it would be better if you upgrade to Windows 10 directly. If you have Windows 7 Professional, you qualify for a free update to Windows Professional 10.

  Upgrade to Windows 10

  Which edition of Windows I get as part of the free update?

  To install the language packs take a look at this article.

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise

  Hope that the information provided has been helpful and let us know if you need more help. We will be happy to help you.

• Is it true that Windows 7 Home Prime Minister will recognize up to 16 MB of ram? And the Windows 7 Professional upgrade will solve this problem?

  Is it true that Windows 7 Home Prime Minister will recognize up to 16 MB of ram?  And the Windows 7 Professional upgrade will solve this problem?  Does anyone have this done successfully?

  Not all programs can use more memory, so if you have a problem you must specify what the problem is, with what program

• Can I use a disk Windows 7 Home full version and just use the key to version upgrade license?

  Original title: the reconstruction of my PC - Windows 7 issue.

  I will be rebuilding my PC which has Windows 7 Home 64 bit installed.  I did the upgrade from Vista to Windows 7 with a family 3-pack.  Can I use a disk Windows 7 Home full version and just use the key to version upgrade license?  Seems a little ridiculous that I have to install another OS and do the upgrade.  I searched the forums and could not easily find an answer to this question.  Help, please.  Thank you!

  Also note that as you change not the motherboard Windows should not require re-installation and activation.

  J W Stuart: http://www.pagestart.com

• I reinstalled Windows 7, but the product key is not accepted. Message says that the product key is upgraded only, not for the new installation. What should I do now?

  I have re installed windows7 and product activation key is not accepted. Message says key is valid only for the upgrade. What should I do now?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  OR

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Try to do a repair of Windows 7 installation, receive the message error "the following problems prevent upgrade Windows"

  Hi, I got problem with IE 9 RC.  I posted here, but there is no solution! (I can't send mail to Hotmail).

  I tried the final version of IE9, but the problem didn't slove. I tried to fix the Win7 + sp1 (upgarde) but it shows me this message:
  The following problems prevent upgrade Windows. Cancel the upgrade, perform each task and then restart the upgrade to continue.
  Your current version of Windows is more recent than the version that you are trying to level to. Windows is unable to complete the upgrade.
  Windows needs to be restarted if necessary to system files can be changed before you continue.
  The upgrade of Windows will affect the following programs or devices:
  These devices may not work properly after the upgrade. Before the upgrade, we recommend that you update the drivers for those devices. Cancel the upgrade, open the control panel and search for "update device drivers" or go to the website of the manufacturer of the device to search for updated drivers.
  USB Virtualization: Stub virtualization USB driver
  These programs may not work properly after the upgrade. We recommend that you uninstall these programs before upgrading. Cancel the upgrade, open Control Panel and search for "uninstall a program". (Note: programs marked as * can be reinstalled securely after the upgrade.)
  Age of Empires III
   
  and thank you.

  I tried wake SP1 with windows installation, but it did not work, I installed clean.

  Thanks to you all.