13-No Yoga ' Dim display after "after update 8.1

Similar Questions

• Dim display after time or sleep mode

  Display dim after time or sleep mode.

  How can I get brightness without having to reboot?

  You can use FN + F6/F7 to change the brightness?

  You must also inform us which model of laptop you have and what operating system you are using.

• Battery and Wifi info not displayed after updating IOS 10

  After upgrading to IOS 10 I have more information at the top of my home screen line. He comes to the line with WiFi, battery, and other info. I see it if I open an application, only some however. This status being lost, it is difficult to look at the life of the battery.

  How do I turn it back on?

  If it cannot be enabled by the user, then Apple needs to bring him back.

  David

  Hello! You can activate the in your settings. Go to battery and select on the percentage. The other options that are displayed on this bar, you can also turn on in general settings. Make sure that the WIFI is enabled in the settings. I had this happen before. After trying your settings, if you still do not see the bar with all the status restart the device. If it still does not work, you can try to recover the device on iTunes. The last resort would be to call the Apple support. I'll try to fix it in the settings that the lines may be busy.

• ToolTips ceases to display after updating to firefox 11/12

  I'm on Ubuntu 11/12 and tooltips no longer works after that I updated to v11 or v12 of FF. I checked on various websites and ToolTips have stopped working. I checked about: config and it is.

  My extensions are: WOT; Tor-button; Flashblock; Ghostery; ABP; DNTP; HTTPS everywhere

  It's a problem to Add on, I'll try to see that it is thanks

  Edit: torbutton was the problem; TorButton 1.4.5.1 disabled resolved, thanks again!

  Edit 2: FYI she also set by dragging the problem tabs, where I couldn't move / drag the tabs to re - organize / do new windows/join to other FF Windows. Solved more than a problem with this = D

• Satellite A500: problem with the driver of sound and display after update!

  A500 Windows 7-64 bit

  I download the latest driver (6.0.1.6048) sound and display driver (8.16.11.8973) and I have a few problems.
  The colors are too bright and the sound is too deep (as the middle are too low).

  Hello

  Then why you n t go back to earlier versions of the driver?
  In your case, I would recommend setting the operating system at the point of time at first, until you have updated the drivers.
  Usually, this should help to recover the old drivers again.

  Welcome them

• BlackBerry Q10 Q10 too big display after update 10.3

  My Q10 has been recently updated to 10.3.1 and since then the screen has expanded so I have to pinch myself to return to the normal size, no solution to this problem of irritaing? It also means that I can't swipte everywhere until I pinched on the screen.

  ^

  Well Yes, that's what it is. its value to default on OS 2 latest updates turn it off!

• Language display button became unavailable after update

  Language display button became unavailable after update

  Hello!

  I use the Russian version of the HTC sense XE. After the last update button, triggering languages of entry become unavailable. So I can't type on my Russian servers.

  Someone knows something about this problem?

  My PocketCloud's Pro version.

  Max, St. Petersburg, Russia.

  Once again my apologies, we still don't officially supported the Russian language with our application. =\

  Josh Maurer
  Visit our web site books and the Knowledge Base at pocketcloudsupport.wyse.com
  

• After update, the display text of all my PDF files is not clear (I mean not not strong)! Any suggestion?

  After update, the display text of all my PDF files is not clear (I mean not not strong)! Any suggestion?

  Hello

  Please tell the Reader/Acrobat version you use.

  Also say work on the operating system.

  You can try the next step and see if that helps.

  Launch Reader/Acrobat > Navigate to Edit > preferences > Page Display > rendering > smooth text choose to monitor and click OK.

  See if that helps.

  Concerning

  Sukrit diallo

• Badge of the App Store display available updates after updating all

  With the help of iPhone 4 with iOS 9.2.1

  After Update 9.2, then 9.2.1 I update applications download in iTunes and sync then peripheral.  9 app and iTunes updates show that they are copied and synchronized.  But the insignia of the App Store on iPhone still shows 9 available updates.  In the App Store, the 9 apps show as 'open', but 'install all' is grayed out.  I opened a few apps in the App Store or on the usual icon, and they seem to work ok.  I tried to restart and reset, but badge always shows a number.

  BTW, have also an old iPad and iPad Air now with 9.2.1 and this issue is not present.

  Hide the problem is to disable the badge icons in Notifications

  Or update directly with App store on the phone

• Optional update continues to display after installation

  I have a particular update I installed and appears in the history of the update installed successfully, but continues to display in windows update. If I try to install it again it fails.
  The update is Realtek - network - Realtek RTL8101E Family PCI-E FE NIC.
  This problem occurs only with this particular update.
  Thanks for your help.

  Hi Supernano,

  The best way to deal with that is to go in the updates, make a right click on the particular update, then select "Hide update". That removes it from the list.

  Dave Dave D D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• After updating firefox, pages load correctly with windows 10

  Okay so after I upgraded to firefox with my windows 10 update, everything was fine. but lately I have had problems with some sites Web does not. so after updating firefox to its default settings, I uninstalled and reinstalled nothing works correctly in firefox. Since I did the update its maddening that nothing does not load. I have attached a picture of what look like my web pages. I tried to help, but everything is messed up on the pages. can someone help me with this?

  There are security software such as Avast and Kaspersky that intercepts secure connections and sends its own certificate.

  If you have Avast then try disabling the analysis of HTTPS in the Web Shield, Avast.

  • http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/
  • https://Forum.avast.com/index.php?topic=176073.0

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the "Add Security Exception" this URL chrome by pasting into the address bar of Firefox and check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field of location of this window, type or paste the URL of the Web site.

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  You can check details such as the issuer and the certificate chain in the Details tab of the certificate display.
  Check which is the issuer of the certificate.
  If necessary, you can attach a screenshot that shows the display of the certificate.

• My Macbook Pro does'nt connect after update to 10.11.6

  Hi all.

  After update from my Macbook Pro to 10.11.6 he starts, but after entering my password, then pressing enter shows the loading animation and it is.  I let him go lastnight believe he worked at something after the update, but this morning, nothing...

  An advise, please.

  Kind regards

  Fabio

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this article to support. You'll be 'restoration' the boot on the backup volume volume.

  If you use 2 FileVault, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu. When you are prompted, enter your login password.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should automatically restart in The Migration Wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• After update to Firefox 32.0.3 print dialog box will not apear in Win7Pro/XP after awhile, but a restart of Firefox will allow him to appear again...

  After update automatically to 32.0.3 Thursday last Monday on the computers of all of our employees and boss both Win7 pro and XP pro, we saw Firefox sessions that will not bring the print dialog box. The print preview dialog box will return but no button print or print menu to display the print dialog box. After you close Firefox and reopen the print dialog box works again for some time. Web sites that use boss and staff during a session are different and appear to be the cause. Firefox settings are at fault because simply restart of Firefox just solves the problem and no other web browsers or application has any problem with the display of the dialog box print at any time. Again, that has started on all computers as soon as 32.0.3 was automatically installed during the night.

  Thanks Guigs2,

  Our users done restaring Firefox so I couldn't get this info.
  Now, it seems that the issue may have been corrected in v33.

• Lightning fails after update to Thunderbird

  Hi Guy,

      I have updated Thunderbird to the latest Version and now Lightning does not seem to want to re-populate. It will not allow me to switch between  different displays (Day, Week, Month). Also the TASK entries are no longer available.
     How do I re-synch to the appropriate file, and where are they please?
  

     Many Thanks in Advance
  

     IanB
  

  Have you checked the updates for your add ons after update to Thunderbird. Each new version of Thunderbird is a matching version of lightning. Looks like you have not upgraded the lightning.

  Download the version you need here.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/lightning/versions/