Dim display after time or sleep mode

Similar Questions

• Pavilion mini 300-010 in: no display after starting in safe mode

  Recently (2 weeks) bought the Pavilion Mini Office 300-010 and was well before decide me Flex my curiosity.

  the office is connected to my monitor VGA Samsung using the HDMI-VGA connector since the release of funds has no VGA or DVI - I usage options.

  the part where my curiosity killed the cat, was when I decided to start the winodws 8.1 in safe mode and see what happens.

  pressing F8 did not help that the load of the OS had no delay (or maybe it's the UEFI BIOS) and so I decided to put safe mode with "a minimum without network option 'using 'msconfig'." Performed a reboot assuming I see safemode and all I got is a black screen. Noticing that the driver for the conversion of the display cannot be loaded in safe mode and now I'm stuck because I do not have a p LCD monitor that plugs directly into.

  I checked the monitor VGA just in case, and it seems to work very well with my laptop. . Done reboot "N"-number of times and the result is the same. ".

  is there a way to get out of safe mode without actually doing a HDMI compatible monitor by just using the keyboard?

  Hello @LogicMantra,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your office is not able to display after starting in safe mode, and I'd be happy to help you in this case!

  To fix this, I recommend you to borrow an HDMI compatible monitor and update the drivers for your system this way. If this does not work, please follow this document on the computer starts up but screen remains blank (Windows 8).

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• fqdn ping fails after recovery from sleep mode

  client system is win7 64 bit

  Server DSN is isc bind 9.7 works on win 7 64 bit

  local system of fqdn ping fails after recovery from sleep mode.

  I do not think that the ping never hits the network.

  Nslookup of full domain name or name of the system only exists.

  the system name ping only succeeds.

  then after ipconfig/release, ipconfig / renew, successor to ping the domain name full local system.

  someone at - it thoughts or ideas?

  Hello

  From the description of the problem, it seems that your computer is on a domain. I suggest you post the same question on the link below. The link given below is link TechNet Support for Windows 7. The question facing you is best for TechNet forums.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other issues related to Windows.

• U3.0 dynadock not resumed after the laptop sleep mode

  Hi all

  I am confronted with the problem that my Dynadock U3.0 does not resume if I fashion "sleep" on my cell Samsun.

  It works very well at the start, it works when I take a full stop, and I just checked it in Hibernate mode and it seems to work fine too.

  Can anyone help me please with this problem.

  _Other factors: _
  I'm running it on a USB 3.0 connection.
  I have this USB connection should remain in charge mode 'sleep'.
  Windows 7
  64 bit
  dynadock model: PA3927A-1PRP

  The only way to get after that 'sleep' mode call is to pull the power cord out the dynadock, wait, then reinsert it.

  Any advice would be welcome.

  Thank you for your help

  Hello

  I think that it s not Dynadock question but with the USB ports on your computer/laptop.

  The sleep or Hibernate mode affects devices attached to the Dynadock and not directly the Dynadock. If the computer/laptop wakes up fashion 'sleep', the Dynadock should be recognized automatically. In the case where the device does not recognize the Dynadock, there must be something wrong with the computer.

  By the way: you said the Dynadock is connected to USB 3.0.
  I recommend to go to a USB 2.0 port and test it again.

  Last but not least: make sure Dynadock uses the latest display driver that you can download from this page: http://www.displaylink.com/support/downloads.php

• Portege R830-10R: No. USB connection after recovery from sleep mode

  Nice day!

  I have experienced the problem depending on my Portege R830-10R for a long time.

  Quite often, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  After awhile, like 10-15 minutes of work (or), the problem is solved by itself, but normally, it is not the case.

  If I try to send the laptop to Hibernate or "standby mode" again, while this problem is active, allows to say, it not put into hibernation and crashes on a midway with a black screen - so I have to stop it manually, and then start again.

  Normally, the only way to solve the problem is to restart, but the issue comes after the next "standby".

  Someone has something like this? Any solution available?

  Hello

  > Quite frequently, when he recovers as soon as "sleep" mode it loses the ability to recognize USB devices and built-in 3G modem does not work as well.

  Have you noticed this behavior from the first day of purchase?

  Only special USB devices assigned as USB flash memory stick or USB HDD or are
  other devices such as the USB mouse or USB keyboard has also affected?

• Windows Media Player 12 on Windows 7 stops working after recovery from sleep mode

  I have problems to make Windows Media Player 12 to run correctly after a system sleep (standby). It works very well after the maximum boot and for as long that the machine is not going mode sleep. It is only a problem with Windows 7 and Media player 12. All other Win 7 applications seem to work correctly. The system also works very well for Vista/Media player 11.

  I installed my upgrade Windows 7 Home Premium x 64 as a new installation on a separate hard drive. This problem exists right after installation - no other software not added. I then installed all the updates MS available and the problem has not disappeared. I installed the OS a couple of times (including a copy of Windows 7 Professional x 64) on another hard drive too and the problem remains.

  Media Player 12 works perfectly until the system goes into sleep mode - either by itself, or manually. When it resumes, Media player launches, but when you try to play something, he will only play the first couple notes of music and then freeze. Same thing with videos - it will get the first couple of frames played, and then hang. If you continue to stop and restart Media Player, eventually it will be totally suspended and after a few minutes the error "Server execution failed" message. At that point in the Task Manager, wmplayer.exe will consume is a complete base my Quad CPU (25%), do nothing. Sometimes, you can kill the process and take control of the back of the PC. Other times it crashes completely and the only thing you can do is to shut down the PC.

  Media Player 11 under Vista Home Premium x 64 on the same PC works fine. I was never able to get Media Player 12 in Windows 7 to work properly after a standby/on standby. If I reboot, everything works fine so it seems to be that something related to a problem of sleep/recovery.

  HP supports suggested restarting the service WMP network sharing.  That has not helped, but if I stopped and set to manual start, Media Player would play the sound/music but not video of several tests.  But if I stopped and began to WMP 12 a few times more the problem returns.

  Well after working with the help of HP for several days, it seems to be something between the video card and card mother / BIOS between them.  At start-up, everything works well, but after the exit mode ensures, hardware diagnostics show a failure of local video memory.  Media Player is finally touched by it.  Doesn't a lot of sense to me that this does not happen under Vista, Win 7.  You have to return the PC to HP for diagnosis/repair.

• Satellite A660-18 - powers off after waking from sleep mode

  My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.

  Don't know what to do, how can I fix without turning off completely from mode "sleep"?

  Hey Buddy,

  > I upgraded the memory from 4 GB to 8 GB
  And have you had the problem before you upgrade memory too or as memory upgrade?

• Computer is slow after waking from sleep mode

  Original title: my computer is very slow to wake up from sleep mode, especially in the morning, how can I solve this problem?

  Every morning, I'm not able to open any program. If I click too, it freezes andgets cloudy. I know that this is not a virus, because I used my Norton Power eraser and it found no threat.

  Hi OtiliaRodriguez,

  -Did you of recent changes made to your computer before this problem?

  Look in the event viewer to see the error message or error code originally this problem.

  The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  Open event viewer

  What are the information in event logs? (Event Viewer)

  In the meantime, try the steps listed in this article:

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

• TrackPoint and Touchpad stops working after recovery from sleep mode

  Every now and then when my thinkpad edge 11 out of the previous day. The pointer doesn't move. It makes no difference if I use the trackpoint or touchpad. In this case I have to restart the computer using the keyboard and then pointing devices up and running again. No one knows how to fix this? The problem does not occur every time during the recovery from sleep mode, but sometimes it does.

  Hey won1,.

  uninstall the current driver for touchpad/trackpoint for your device.

  Windows should then install its own generic drivers. now with generic drivers install, place your unit in standby mode and then resume.

  see if the same error occurs. in the meantime, go to > http://support.lenovo.com and update your drivers in the bios unit.

• optical drive disappears after recovery from sleep mode

  While recovery mode S3 sleep and looking at windows Explorer, a green bar progresses inside the address bar. During this time my DVD RW is present on the screen under the heading devices with removable storage, but as soon as the green bar comes to an end, DVD RW and even the devices with removable storage section disappear.

  This occurs only on standby S3 and I have to reboot in order to keep my DVD RW.

  The DVD - RW is a disk IDE (LG Super Multi DVD drive GSA - 4163B) with an IDE-> Sata converter to allow the use of the sata cable to the motherboard.

  Any suggestions as to why this happens in sleep mode S3 only?

  Hi Peter,.

  What is the brand and model of the computer?

  I suggest you to run the Fixit described in the article and verify.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060/en-us

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756
   
  (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows
   
  If the problem persists, you may need to update the update of the firmware to the last by visiting the manufacturer's Web site.
   
  Hope this information helps. Response with status so that we can help you.

• Windows 8 I lose the internet connection after waking from sleep mode

  My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.

  Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)

  I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).

  Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:

  1. Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
  2. Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value

  * Not sure about my translation of terms/options used above - I am not in an American version

  If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.

  + Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...

  Hope this helps

  See you soon

  LZ.

• The menu bar clock freezes after recovery from sleep mode

  After the upgrade to Sierra, I noticed that the clock in the menu bar (top right) show wrong time.  This occurs when the iMac comes out of his SLEEP.  When I hoover the pointer of the mouse on the clock, it would turn into a spinning ball (i.e. no response).  I have to disconnect and reconnect so that the clock in the menu bar to indicate the correct time.  She would continue to work until the next time that the iMac comes out of SLEEP.

  Anyone facing this problem?

  Have you tried booting in safe mode (hold down the SHIFT key at startup)? The problem persists?

  If you create a new user account, does?

• Safari crashes after waking from sleep mode mac mini

  And to make things more awkward, it seems to freeze with youtube and google. He has not done this since the beginning. Lately, he's starting to do this. It is so boring. All other sites work except these two, or at least those's ones I learned to freeze. Open a new Help window sometimes. But earlier, I had to start the mac everything again to access youtube. So what to do? After the mode 'sleep', I can't seem to google, but I can get to atavist for example. YouTube is the only place that I can't replace and for real - it's so idiots clitch he needs an explanation.

  Try the suggestions in this article http://osxdaily.com/2015/01/18/troubleshoot-safari-freezes-crashes-mac-os-x/

• After going into sleep mode after automatic update of Windows 7, Pavilion p6210y PC won't sleep

  In two weeks, after an update of HP launched automatically, my monitor is not recognized - I tried to restart my PC via the power button, but the action brought everything back without interruption to the place.  Finally I made the necessary update HP closed down and all was back to normal.  Last night I made a full stop and a Windows 7 launched updates (do not turn off your computer, etc..).  This morning when I powered back upward, I got messages on the windows during Setup, etc, then everything returned normally.  I worked for a few hours and left the machine - it entered into mode 'sleep' and now I can't get out of fashion "Eve".  If I power cycle the monitor, I can messages same "cannot detect.  If I try to shut down the PC via the power button, the light is orange/sleep, I hear a humming, then seeing if off, then back to orange/snoring, reverse, etc..  Keeps the bike like this.  I'm afraid that question a couple of weeks may have been a sign of early warning of a problem of h/w, but am not sure.  Can anyone help?  I am not very savvy h/w... and hope that it is something more simple than that.  The PC is 2.5 years.

  Your need to deactivate "standby" as soon as POSSIBLE to determine what is happening. You have 2 numbers because your motherboard is the infamous M2N78 - LA.

  That hum maybe the CPU fan:http://h30434.www3.hp.com/t5/Other-Desktop-PC-questions/To-all-with-M2N78-LA-CPU-fan-constantly-changing-speed/td-p/704265

  The other issue is more complex. Overheating the Nvidia chip. This chip share logic and circuits with the SATA hard drive controller and the graphics port. http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716

  Your need to read each section and each answer. I suggest you save and move forward with all the measures that you feel is of advantage.

• Satellite M200 - problem detection USB connect after waking from sleep mode

  Hello. I need help! I'm having trouble with the laptop Satellite M200 (Vista) - after the awakening of the mode standby, none of the things connected to the USB port is detected, even if they worked perfectly before sleep. No mass reader, mouse, iPod is detected - even the SD for ready boost is not detected. Simple plug in and out calls any action (window AutoPlay etc.). Sounds like a BIOS problem but my laptop is completely up-to-date with all drivers and all the rest (of Windows and Toshiba support website). Would appreciate any advice. See you soon.

  > fully up-to-date with all the drivers and everything else
  The latest version of the BIOS too?