15 t: just got new HP - computer laptop 15 t Windows 7 Pro

Similar Questions

• I just got back my computer to its factory settings... and now I amd trying to connect to the internet

  I just got back my computer to its factory settings... and now I amd trying to connect to the internet but it is windows xp and im lost I tried the installation wizard and I still don't know any help would be great

  Hello

  1. how to access internet through hard wired or wireless?

   
  I suggest you to follow the steps below and check if it helps.
   
   
  Method 1:  You can follow the steps mentioned in the link below to make an Internet connection
   
  To establish an Internet connection
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/howto_i_client.mspx?mfr=true
   
   
  Also check out the article below: How to configure Internet access in Windows XP Professional.
  http://support.Microsoft.com/kb/305549
   
   
  More information: You can see the steps outlined in the article below.
  How to troubleshoot possible causes of Internet connection problems in Windows XP.
  http://support.Microsoft.com/kb/314095
   
   
  Hope this information is useful.

• Sony Mini DV DCR-TRV18E camcorder to my computer laptop 64 bit Windows 7. The camera is not compatible with this version of Windows.

  I can't connect my Sony Mini DV DCR-TRV18E camcorder to my computer laptop 64 bit Windows 7. The camera is not compatible with this version of Windows. Does this mean that I can't import my old videos? Thank you.

  Yes, this says it's not compatible. So I don't think it'll work in Win7. There a firewire connection? If this is the case you can use it if the laptop has firewire top. All you need is a cable

• I installed a new hard drive and went to Windows 7 Pro. And Ms. Updates do W o r k.

  I installed a new HD and then installed MS Windows 7 Pro... the installation that I chose not to do the updates but elected to do them later time... re booted system and all this time I was connected to the net and I activated the new facility... However when I TRIED to get the TOP dating Ms... It wouldn't connect... I tried the fix but not with a "clean boot"... it's always the same tool will not connect!  So what of next... I need of these very important updates and of course need answers too!

  The error code I got was code 8024A 006 that it is in the MS update panel

  After he rann throughout the night!

  You will find these solutions and many other things that that might be useful to www.canadiantech.info

  About 120 pages.  Most of it is written for non-technical people, but there is a section for computer scientists.

• I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  I bought a laptop with a windows xp pro, I have the serial number, but I don't have the installation disc. How can I know which version I need? SP3 has not worked... at the moment I am testing SP1

  The serial number of the computer has nothing to do with the product key for Windows.

  What happened when you tried to install Xp with sp3? If you do not have the original for the computer that you use to install Windows?

  You can try to contact the manufacturer of the computer who may be able to provide the recovery disc. The disks are usually under $ 20.

• using Laserjet-Canon LBP 1120 printer on new HP ProBook 4350 s under Windows 7 Pro (64 bit).

  Hello everyone, I have a printer Canon Laserjet LBP 1120, I try to use via the new HP ProBook 4350 s under Windows 7 Pro (64 bit).  I tried the recommended troubleshooting options, nothing helps... Any suggestions?  Thanks a bunch

  All drivers/software from the Canon site, if they have win7 64 bit software and install according to Canon intstructions

• "Creative Cloud App" watch I have Illustrator, but just got new laptop & didn't do it, how to re-ins for

  just got a new laptop and was only like 10 days in my 30-day trial and I'm trying to re - install "Illustrator", and it keeps showing and telling about "Creative Cloud App" that I have, but is not on this new laptop, how do I re-installll?

  http://helpx.Adobe.com/creative-cloud/KB/AAM-lists-removed-apps-date.html

• Computer laptop Gateway with Windows Vista has locking password HARD drive on it.

  I bought a computer laptop gateway I believe it has windows vista but it has locking password on that HARD drive can I buy windows 8 or 8.1 and download on it. Also it allows me to run any cd what can do?

  * Original title: laptop computer purchase

  Hello

  I suggest that you either get the password from the seller or return the laptop to the seller and get a refund.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• HP pavilion dm4-1160us: No. puedo instalar IDT Audio to a computer laptop e con windows 8.1

  Como puedo instalar IDT Audio to a laptop con mi Windows 8.1?

  Antes tenia windows TR 7 y lo podia instalar, pero al instalarlo nuevo tratar, me da error, alguien sabe como solucionarlo?, Gracias

  Spoiler (Highlight to read)

   

   

  Hello:

  See if this audio driver IDT W8.1 works for you...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

• Why can't I install supergeo software in my computer laptop home premium windows 7

  I can not install the Office Server, Supergeo, and all products Supergeo on my laptop.it is windows 7 Home premium

  When I try to install, a message
  "the program could not be installed correctly, try with version compatible with windows.

  Most of the install problem may caused by the UAC in Vista or Win7, please see the document:

  http://www.supergeotek.com/inner/download/install%20SuperGIS%20on%20Windows%20Vista%207-20110607143832.PDF

• Where can I find device drivers for a computer given to nine Windows XP Pro?

  original title: WHERE CAN I FIND DRIVERS for WIN XP PRO SP3 RENOVATED OS DEVICE?

  I TRY TO INSTALL WIN XP PRO SP3 EDITION OS RENOVATED.

  I TRIED ON 4 COMPUTERS, 3 BACK NINE AND 1 AGAIN. I ONLY

  COULD REACH 1 SUCCESSFUL ON A REFURBISHED HP INSTALLATION

  Laptop COMPAQ 6510 b AND WHICH only LASTED ABOUT 7 OR 8 DAYS.

  IN THIS CASE, I THOUGHT IT WAS THE COMPUTER, BUT I HAD THE SAME

  RESULTS ON A BRAND NEW eMACHINE EL 1352. IT WORKS, BUT IT WILL NOT

  LOAD DEVICE DRIVERS. I GOT AN ERROR... NO INETCPG.dll. WHAT HAS

  BEEN WITH THREE DIFFERENT COPIES OF THE OS SAQME SOFTWARE.

  WHERE CAN I GET THE DRIVERS? WHEN I ACCESS DEVICE MANAGER,

  There are 5 or 6 egg YOLKS? s. This has HAPPENED SEVERAL TIMES.

  What's up with all THE CAPS and short lines?

  You don't say what you use to install Windows XP Pro, but the normal installation media of Windows XP does not include device drivers for everything, especially for laptop/notebook computers.

  You need to get the drivers from the manufacturer of the computer (or computers that are built or made by small manufacturers, manufacturers of the individual hardware components).

  For a laptop Compaq 6510 b, go here--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3355661&prodTypeId=321957&prodSeriesId=3355650&swLang=13&taskId=135&swEnvOID=1093 read the Installation Instructions which can be found on the individual download pages.

  For an E Machines el1352\, go here--> http://support.gateway.com/us/en/emac/product/default.aspx?tab=1&modelId=2080

  I GOT AN ERROR... NO INETCPG.dll.

  'INETCPG.dll' is not a file of Windows XP.  Do you mean C:\windows\system32\inetcfg.dll?
  What are you trying to do when you get this error?  Please post the full error message without paraphrase.

• Web Cam not working not not on HP laptop after installing Windows 8 Pro disc

  Does anyone have a solution for this?

  Thanks for the information.  I can't believe that HP would do this to his past clients.

  I have 2 laptop computers HP, a Pavilion dv7-3174nr and a Pavilion dv7-4177nr.  Sorry for not mentioning that.  I use Windows 8 Pro at the same time.  I have to reformat one of them to Windows 7 so that I can have a web cam.  A waste of money to have paid for another license of software of Windows 8.  I really want to spend more money on the software (you Cam), in order to use the Web Cam on one.

  I will use the information that you gave me.

  Thanks a lot for helping me.  I'm sure this information will help other people who do not know the decisions of HP on hardware.

• Running AE 7.0 pro... just got new computer crashing...

  Hi people,

  I used AE professional 7.0 successfully for several years now on an iMac that was five years old.  My iMac just died and I got a brand new.  My AE opens very well (I was wondering if I was going to have to upgrade).  In fact, I used AE several times but it tends to crash for no apparent reason.  The stuff I'm working with is not complicated stuff (just some video footage I got from the firm of sequences and a text layer).  And when I try to make and even 30 seconds of my output project, it crashes before the end of the rendering.

  The old slower computer had no problem, but my newer faster seems to be stuck.

  I'm not particularly jazze spend $300 on an upgrade, because the way I just spent $2,000 on my computer, but if it's the only way I can continue to work, so be.

  Clues as to a quick fix might be able to try?  One of you, people more knowledgeable than me out there (that would be you, probably all) have any idea why this might be happening?

  Thanks in advance for any help you may be able to provide.

  Lynn

  A major difference (huge, in fact) that After Effects 7 is a PowerPC application. The only way it can work at all on an Intel processor is in Rosetta emulation mode - IE that it cannot operate effectively at all. Frankly, I'm surprised that you got as much as you did.

  If you have a new computer, you need an application written for its processor. After Effects CS3 and later have been written for the Intel architecture processors.

• Just got new computer, when content access several Web site via firefox namely craigslist. Almost all of the text is yellow, you can't read it. Internet works fine exp

  Since the purchase of new computer am forced to use internet explore as Firefox is causing text on many sites to see in yellow. Some sites have only a few lines that appear in yellow and the other like craigslist are 80 to 90% of yellow text. I can't read this text at all.

  Other things that need your attention:

  Your system details list shows several Flash plugins.

  1. Shockwave Flash 13.0 d0
  2. Shockwave Flash 12.0 d0
  3. Shockwave Flash 11.9 d900

  You can find the installation path of the plugins on the topic: plugins page.

  You can view the Flash player for several plugins Flash player installation folder and delete all (older) versions of the plugin (NPSWF32) and (re) install the latest Flash Player.

  • (32-bit Windows) C:\Windows\System32\Macromed\Flash\
  • (Windows 64 bit) C:\Windows\SysWOW64\Macromed\Flash\

• Need help setting up remote access to my new work computer laptop computer!

  Help! My boss got a new laptop for the office so that I'll be able to work from home through my maternity leave. We never used before remote access, but I'm trying to understand how had put it in place. I followed all the stuff help and can't seem to make it work at home. If I'm in the Office I can connect to my computer with laptop, but I figure it of because its just there. How can I get to where I can access my work computer from my laptop at home?

  Hi Powell,

  Please contact Microsoft Community.

  I understand that you try to configure a share remotely between two computers. Don't worry, I'm here to help.

  In order to best help you, please answer these questions:

  Any application that you use? If so, what is it?

  Remote desktop technology to view another computer desktop on your computer. This means that you can open folders, move files, and even run programs on the remote computer, directly from your own desktop.

  With the new Application of Remote Desktop, you can:

  • Organize all your remote connections in a central location with past connections and published resources displayed as tiles touch-friendly.
  • Customize settings for all remote connections simultaneously or individually using the new Edit feature.
  • Connect multiple computers to remote desktop at the same time and keep an eye on your sessions while you multitask with the Windows 8 feature snap.
  • Easily interact with applications in your remote session using the touch keyboard, touch pointer and Zoom features.
  • Automatically detect and optimize the quality of your connection with RemoteFX for WAN transport improvements.
  • Company access resources published through connections RemoteApp and desktop with your corporate email address.
  • Enjoy an experience fast and fluid in your remote session using technologies of RemoteFX, Multi-Touch of RemoteFX, RemoteFX Media Streaming, Remote Desktop Easy Print, and much more.

  Here is the link that helps you set up Remote Desktop application

  http://Windows.Microsoft.com/en-us/Windows/remote-desktop-app-FAQ#1TC=Windows-8

  Please follow the link below to download the Remote Desktop App

  http://apps.Microsoft.com/Windows/en-us/app/051f560e-5e9b-4DAD-8b2e-fa5e0b05a480

  Hope this information is useful. Please let us know the status so that we can help you