16-bit MS-DOS subsystem message all I did was install windows update... Help, please!

Similar Questions

• Windows 7 update Code 66 error message. Impossible to successfully install windows updates

  What can I do from the windows 7 update won't install every day

  What can I do

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter >

• NTVDM.exe. trouble message I said: "16-bit MS-DOS subsystem" then C:\Windows\sustem32\ntvdm.exe error while setting up environment for the application

  I can not also with ntvdm.exe. I'm no computer expert. The message said: "16-bit MS-DOS subsystem" (this on the header of the window). Then the message is C:\Windows\sustem32\ntvdm.exe error when defining the application environment.

  I already did a sfc/scannow and Windows Resource Protection did not find any breach of integrity.

  I'm trying to run an application on this website http://www.ray-ban.com/international/science/virtual-mirror.

  I'd appreciate any help.

  Best regards

  original title:ntvdm.exe. disorder

  Hello
  You are able to use your applications without problem?

  To check what is causing the problem, try the following steps:

  1:NTVDM method is bound to display drivers for nVidia.I suggest you to update display drivers on the manufacturer's Web site

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2: Clean boot

  Put the computer in a clean boot (namely if any third-party software hinders the process)
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
  Continue with the remaining steps to pin-point on the third party service.

  Note: After you find the program causing the problem, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup.

  3:Disable method and then check the firewall/security software on the system tray.
  Note: Activate the security software after the test

• Impossible to install the software to receive error message like "16-bit MS-DOS subsystem config.nt msiexec.exe file system not suitable for running MS-DOS and Microsoft Applications."

  Hello

  Original title: problem installing the software
   
  When my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box.
  "the 16-bit MS-DOS subsystem
  The msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »
  Grateful for any ideas on how to fix this problem!

  Hello

  1. what 16-bit or software program you try to run? Should I use the CD Rom drive?

  2 - is the question also appear during the installation of Windows updates?

  3. have you made changes on the computer before this problem?

  Follow the methods and check them out below:

  Method 1: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Hope the above information is helpful.

• Apple Watch: can I receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please. Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... someone kn

  I can receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please.

  Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... anyone know why? Thanks to you all!

  Hello

  To change the language for a response on your watch: Press answer > firmly press the screen > press on choose language > select Spanish.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• How can I install Windows Update error 80244019 Windows 7 32 bit?

  How can I install Windows Update error 80244019 Windows 7 32 bit?

  Try to use this to reset the update system is very good,.

  Use Option 2 on the list after right click and select run as administrator

  https://Gallery.technet.Microsoft.com/scriptcenter/reset-Windows-Update-Agent-d824badc

  Download in your downloads folder

  Right-click and select extract all in the downloads folder.

  Then right-click on ResetWUEng and select run as administrator

  Follow the rest of the guides messages

  Press any key to continue

  Type 2 for this Option on the list and the Enter key to reset the update services...

  Press y for Yes and then the Enter key I think twice

  After that that he completed

  Type 15 for this option and the Enter key to restart the machine.

  Must they will restart in 60 seconds will save your work... Press a key to continue.

  After reboot, go to windows updates and manually check the updates shouldn't take a few minutes.

  

  Subsequently

  The manual installation of updates that you have to change your update settings to never check the updates and restart the machine first.

  http://www.SevenForums.com/tutorials/2797-Windows-Update-settings-change.html

  Make sure that KB3020369 is installed, otherwise install it manually it is detailed with all versions, article page

  https://support.Microsoft.com/en-us/KB/3020369

  These links will prompt you to download as soon as you click on them just for you give a heads up :)

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/0/8/C0823F43-BFE9-4147-9B0A-35769CBBE6B0/Windows6.1-KB3020369-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/D/0/5D0821EB-A92D-4CA2-9020-EC41D56B074F/Windows6.1-KB3020369-x64.MSU

  Then manually install page article detailed KB3172605 with all versions.

  https://support.Microsoft.com/en-us/KB/3172605

  KB3172605

  Win - 7 32-bit

  https://download.Microsoft.com/download/C/D/5/CD5DE7B2-E857-4BD4-AA9C-6B30C3E1735A/Windows6.1-KB3172605-x86.MSU

  Win - 7 64-bit

  https://download.Microsoft.com/download/5/6/0/560504D4-F91A-4DEB-867F-C713F7821374/Windows6.1-KB3172605-x64.MSU

  After your windows update settings back to what you had before, and manually check the updates and the rest should appear shortly.

  If you need Visual AIDS to refer to this

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-problems-read-this-first/28147a5f-B0B0-480b-bed9-834a2da7a375

• Error message 0 X 80070070 while installing Windows 7.

  I bought Windows 7 Professional disc directly from Microsoft and it will not be installed. I get the error message 0 X 80070070. I'm trying to upgrade a non-genuine Windows Vista Business installation. I tried both pure and upgrade install and receive the same error message in both directions. I would prefer to do a clean install.

  Make sure that the drive you install Windows to has enough free space. Do not select the recovery partition small if you have one because it's not big enough.

  Run Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  You will need to start the installation by booting from the installation disc.

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  The installation disc could be bad.

  How to order the replacement drive:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/replacement-CD/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  Installation custom own steps

  Time to use:

  Switching from XP to 7, or not supported in place upgrade paths (ex: Vista Home Pro 7)

  A Windows system to 32 bit on a 64 bit system, or change the language

  Don't want to make a room upgrade, or if you want a fresh install / clean

  You can use a Full Windows 7 or upgrade disk to do a custom clean install. This will remove all of your programs, but you can save your files and settings to external storage before doing so. You will need to reinstall all your programs after installing Windows 7. Here are the steps:

  1. start Windows Upgrade Advisor to see if there are known problems that might affect installation and if you can install the 32-bit or the 64 bit version of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2. backup all your files and settings to avoid losing documents, photos and other information. Windows Easy Transfer is a free tool to copy files (not programs) from your PC and then transfer back after installation of Windows 7. If you don't want to use Windows Easy Transfer, you can copy your files to a Flash DRIVE or CD/DVD. Note: The easy transfer will not work when changing languages, or when moving from 64 bit to 32 bit (it will work ranging from 32-bit to 64-bit).

  http://Windows.Microsoft.com/Windows-easy-transfer

  3. find the discs installation and license/product associated to all your programs keys, because you have to manually reinstall all programs. If you have downloaded some Internet programs you can redownload them.

  4. place the Windows 7 disc in your DVD player. A window should appear from the installation process, when asked the type of installation do you want click on custom (advanced option). Note: 32 to 64-bit requires restart and boot from the DVD.

  5. when Windows 7 is installed, you can use Windows Easy Transfer (or a different backup method you used) to restore your files & settings and use your installation disks to reinstall all your programs. Then you're done - take advantage of Windows 7.

  How to upgrade:

  If you have Vista:

  New installation: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7-custom

  Questions about installing Windows 7?

  
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Suddenly, all the printer drivers on Windows update are not digitally signed? So, how to re - install my 3 printers?

  Suddenly none of the printer Co. provides always the downloaded drivers more! And they all quit working, pilots didn't is more accepted, after problems with the Windows updates in general, seem to be fixed now.

  And I finally see HP instructions for a workaround 4 pages long, in Device Manager. But no driver is never accepted to be unsigned digitally suddenly...

  All the printer drivers on Windows update are digitally unsigned? So, how can I install my 3 printers? They are too recent to have discs and HP and Lexmark refer to Device Manager find but none will install because they are not digitally signed. I have W7, W10 and a XP computer for when I have a really frustrated with Windows. Like now.

  How can I reset W7pro and W10pro to accept these drivers yet once, to accept unsigned drivers? What is going on!!!

  Thank you

  I fixed most of my problems of

  -Restore W7 to the 07/01/16 mode without failure and update of the manual setting W.

  -Go back to Firefox 32, with no updates

  -find something new called firewall W features advanced security and made some slash and burn allowing in there

  That's all the misfortunes of weird denied permissions disappeared. I guess I'll stay frozen in time until I get a real solution to all this new protocol permissions I lock the...

  Thanks to you all. I can finally sleep a bit now!

• I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  I get the error message: maigration failed to transfer when I install Windows updates. How can I fix

  Hello

  Thanks for asking!

  You cannot install updates Windows and error migration was not able to transfer.

  The problem can occur if the update of the components are damaged.

  Is the message of exact error that appears?

  I suggest you to reset the update components and check if the problem persists.

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756/

• that means a 42 b error message when you try to install an update

  What does a 42 b error message when you try to install an update?

  Hello
  • Updates are not installing?
  • What is the full error message that you receive?
   
  You can read the following article and try to reset the Windows Update components and try to install the updates.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
   

• I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  Hello

  I apologize for the delay in responding.

  This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.

  https://support.Microsoft.com/en-us/KB/958044

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• I have Lightroom 5.7 on my iMac. I am wanting to set up on my MacBook Pro. I can't seem to find a download for LR 5.7 anywhere - it all CC points. I'd appreciate help please?

  I have Lightroom 5.7 on my iMac. I am wanting to set up on my MacBook Pro. I can't seem to find a download for LR 5.7 anywhere - it all CC points. I'd appreciate help please?

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• Tried to access the programs and get the error: message 16. What is the problem? Help, please!

  Tried to access the programs and get the error: message 16. What is the problem? Help, please! Photoshop, photoshop elements, Dreamweaver - none of my creative Cloud applications will be commissioning, since my last update. I need to access these programs for the job, I'm trying.

  Hi wdriver,

  It seems that for some unknown reason the authorization in the licensing folder is deleted. Please try to start one of the applications by right click and select run as administrator, it should solve the problem by doing this.

  Please let us know if it helps.

  Kind regards

  Abhijit

• 16-bit MS-DOS subsystem popup

  There's a box of subsystem 16 bit MS DOS popping up on my window closed, which, although is repeatedly popping up. Also a xmlstatreport.com site is constantly being blocked by anti virus, I installed on my system. Why is this happening? Kindly help.

  Before that I offer a few comments to your ad, I just want to remind you that we are here in the virtual world and comments like yours cannot be discussed at all. For a serious debate, we must as much as possible of useful information that can help us to understand your problem.

  Your ad looks: I try to start my car, but there is no reaction. Why is this happening?
  There is no serious mechanic who will be able to give you the right answer.

  So please be so kind and provide some useful information.
  What computer Toshiba laptop do you have?
  What operating system do you use?
  When is see the window?
  Since when this happen?

  You can boot OS correctly?
  You can start in safe mode?
  Have you tried to roll back the BONES to the bygone era?

  And, and, and...
  If possible send a photo.