1602i assertion failure and radio crash

Hello world

I have 3 APs with some of the thorny issues. Here is the information below:

Cisco IOS software, software C1600 (AP1G2-K9W8-M), Version 15.2 (2) JB2, RELEASE SOFTWARE (fc1)

Product/model number: AIR-CAP1602I-C-K9

Controller: "Cisco 5500 Series Wireless LAN Controller.

Product name... Cisco controller
Version of the product... 7.4.110.0

Logging:

* 17:47:42.927 Mar 4: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST
., 4)
* 17:47:49.107 Mar 4: EVT-4-AVT %: write flash: / done event.capwap
* 17:47:49.123 Mar 4: LWAPP-3-CLIENTERRORLOG %: switch to standalone mode
* 17:47:49.131 Mar 4: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION
* 17:47:49.131 Mar 4: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.126.242.247:5246
* 17:47:49.179 Mar 4: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.
* 17:47:58.183 Mar 4: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
* 17:48:08.183 Mar 4: % 3-CAPWAP-ERRORLOG: MWAR selected ' xxxxxxxWLC001'(index 0).
* 17:48:08.183 Mar 4: % 3-CAPWAP-ERRORLOG: go join a capwap controller
* 17:47:59.000 Mar 4: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.126.242.247 peer_port: 5246
* 17:47:59.747 Mar 4: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.126.242.247 peer_port: 5246
* 17:47:59.751 Mar 4: % CAPWAP-5-SENDJOIN: send request to join 10.126.242.247
* 17:47:59.823 Mar 4: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.
* 17:47:59.823 Mar 4: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.
* 17:47:59.823 Mar 4: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller
* 17:47:59.823 Mar 4: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 10.126.242.247 capwap
* 17:47:59.911 Mar 4: "Promiscuous" from Ethernet mode
* 17:48:00.623 Mar 4: LWAPP-4-CLIENTEVENTLOG %: OfficeExtend Localssid recorded Flash AP
* 4 Mar 17:48:00.767: ac_first_hop_mac - IP:10.126.134.1 Hop IP:10.126.134.1 IDB:BVI1
* 17:48:00.767 Mar 4: setting AC hop first MAC: 58f3.9cf2.5781

* 17:48:00.807 Mar 4: % CAPWAP-5-JOINEDCONTROLLER: AP joined controller xxxxxxxWLC001
* 17:48:00.855 Mar 4: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file
* 17:48:00.855 Mar 4: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file
* 17:48:00.855 Mar 4: LWAPP-4-CLIENTEVENTLOG %: map No. LS Flex to load ACL configuration file. To connect to the controller to get the configuration file
* 17:48:00.855 Mar 4: LWAPP-4-CLIENTEVENTLOG %: no central Dhcp configuration file map to load. To connect to the controller to get the configuration file
* 17:48:00.855 Mar 4: LWAPP-3-CLIENTERRORLOG %: connected mode
* 17:48:01.579 Mar 4: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down
* 17:48:01.587 Mar 4: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 17:48:02.579 Mar 4: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 17:48:02.615 Mar 4: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 17:48:02.627 Mar 4: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down
* 17:48:02.635 Mar 4: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 17:48:03.615 Mar 4: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 17:48:03.627 Mar 4: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 17:48:03.759 Mar 4: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 17:48:03.775 Mar 4: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down
* 17:48:03.783 Mar 4: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 17:48:04.691 Mar 4: FEDS-6-ACTIVATED %: Signature of IDS is loaded and enabled
* 17:48:04.759 Mar 4: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to
* 17:48:04.807 Mar 4: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 17:48:04.847 Mar 4: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 17:48:04.855 Mar 4: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down
* 17:48:04.863 Mar 4: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 17:48:05.847 Mar 4: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 17:48:05.855 Mar 4: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 17:48:05.903 Mar 4: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 17:48:06.903 Mar 4: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to
* 5 Mar 03:40:38.815: ac_first_hop_mac - IP:10.126.134.1 Hop IP:10.126.134.1 IDB:BVI1
* 03:40:38.815 Mar 5: setting AC hop first MAC: 58f3.9cf2.5781

* 03:40:38.819 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 03:40:39.267 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively
* 03:40:39.443 March 5:
Note: A Spanning Tree bridge identifier random address of 0000.0c8a.8a10
has been chosen for bridge Group 2 for the selected mac address
is already used by the bridge group 18.
* 03:40:39.443 March 5:
Make sure that this address is unique.

* 03:40:39.819 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 03:40:40.267 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 5 Mar 03:40:43.299: ac_first_hop_mac - IP:10.126.134.1 Hop IP:10.126.134.1 IDB:BVI1
* 03:40:43.299 Mar 5: setting AC hop first MAC: 58f3.9cf2.5781

* 03:40:43.307 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 03:40:43.747 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 03:40:44.343 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 03:40:44.351 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 03:40:45.343 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 03:40:45.391 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 03:40:46.475 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to
* 5 Mar 03:40:59.319: ac_first_hop_mac - IP:10.126.134.1 Hop IP:10.126.134.1 IDB:BVI1
* 03:40:59.319 Mar 5: setting AC hop first MAC: 58f3.9cf2.5781

* 03:40:59.819 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio0, changed state down administratively
* 03:40:59.911 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio1, changed state down administratively
* 5 Mar 03:41:00.323: ac_first_hop_mac - IP:10.126.134.1 Hop IP:10.126.134.1 IDB:BVI1
* 03:41:00.323 Mar 5: setting AC hop first MAC: 58f3.9cf2.5781

* 03:41:00.991 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 03:41:00.991 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 03:41:01.555 March 5:
Note: A Spanning Tree bridge identifier random address of 0000.0c8a.e070
has been chosen for 3 Group of bridge for the selected mac address
is already used by the bridge group 18.
* 03:41:01.555 March 5:
Make sure that this address is unique.

* 03:41:02.323 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 03:41:02.771 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 03:41:03.031 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 03:41:04.023 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 03:41:04.071 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 03:41:04.079 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down
* 03:41:04.087 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 03:41:05.071 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to
* 03:41:05.079 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 03:41:05.115 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 03:41:05.123 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down
* 03:41:05.135 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 03:41:06.115 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 03:41:06.123 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 03:41:06.175 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 03:41:07.175 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to
* 5 Mar 10:28:52.083: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 10:28:52.083 Mar 5: Traceback-= 292514z 8B0264z 908868z 9093B8z 8BBD4Cz 8BE768z AFC544z AFD67Cz AFE838z B01DECz 5E6FC4z 5E73D0z 52E448z 52B028z 52B028z 52E510z
* 5 Mar 10:28:52.083:... STOP TA TRACK ON TCP PKT SAID...
* 5 Mar 10:28:54.291: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 10:28:54.291 Mar 5: Traceback-= 292514z 8B0264z 908868z 9093B8z 8BBD4Cz 8BE768z AFC544z AFD67Cz AFE838z B01DECz 5E6FC4z 5E73D0z 52E448z 52B028z 52B028z 52E510z
* 5 Mar 10:28:54.851: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 10:28:54.851 Mar 5: Traceback-= 292514z 8B0264z 908674z 90A400z 5294ACz 52E448z 52B028z 52B028z 52E510z 3F93CCz
* 5 Mar 10:33:24.459: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 10:33:24.459 Mar 5: Traceback-= 292514z 8B0264z 908868z 9093B8z 8BBD4Cz 8BE768z AFC544z AFD67Cz AFE838z B01DECz 5E6FC4z 5E73D0z 52E448z 52B028z 52B028z 52E510z
* 5 Mar 10:33:29.307: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 10:33:29.307 Mar 5: Traceback-= 292514z 8B0264z 908868z 9093B8z 8BBD4Cz 8BE768z AFC544z AFD67Cz AFE838z B01DECz 5E6FC4z 5E73D0z 52E448z 52B028z 52B028z 52E510z
* 5 Mar 10:33:30.031: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 10:33:30.031 Mar 5: Traceback-= 292514z 8B0264z 908868z 9093B8z 8BBD4Cz 8BE768z AFC544z AFD67Cz AFE838z B01DECz 5E6FC4z 5E73D0z 52E448z 52B028z 52B028z 52E510z
* 18:18:49.611 Mar 5: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST
., 4)
* 18:18:49.623 Mar 5: LWAPP-3-CLIENTERRORLOG %: switch to standalone mode
* 18:18:49.623 Mar 5: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION
* 18:18:49.623 Mar 5: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.126.242.247:5246
* 18:18:49.667 Mar 5: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.
* 18:18:58.671 Mar 5: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
* 18:19:08.671 Mar 5: % 3-CAPWAP-ERRORLOG: MWAR selected ' xxxxxxxWLC001'(index 0).
* 18:19:08.671 Mar 5: % 3-CAPWAP-ERRORLOG: go join a capwap controller
* 18:18:59.000 Mar 5: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.126.242.247 peer_port: 5246
* 18:19:05.483 Mar 5: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.126.242.247 peer_port: 5246
* 18:19:05.487 Mar 5: % CAPWAP-5-SENDJOIN: send request to join 10.126.242.247
* 18:19:05.559 Mar 5: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.
* 18:19:05.559 Mar 5: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.
* 18:19:05.559 Mar 5: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller
* 18:19:05.559 Mar 5: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 10.126.242.247 capwap
* 18:19:05.647 Mar 5: "Promiscuous" from Ethernet mode
* 18:19:06.363 Mar 5: % LWAPP-4-CLIENTEVENTLOG: OfficeExtend Localssid recorded Flash AP
* 5 Mar 18:19:06.459: ac_first_hop_mac - IP:10.126.134.1 Hop IP:10.126.134.1 IDB:BVI1
* 18:19:06.459 Mar 5: setting AC hop first MAC: 58f3.9cf2.5781

* 18:19:06.859 Mar 5: % CAPWAP-5-JOINEDCONTROLLER: AP joined controller xxxxxxxWLC001
* 18:19:06.907 Mar 5: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file
* 18:19:06.907 Mar 5: LWAPP-4-CLIENTEVENTLOG %: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file
* 18:19:06.907 Mar 5: % LWAPP-4-CLIENTEVENTLOG: map No. LS Flex to load ACL configuration file. To connect to the controller to get the configuration file
* 18:19:06.907 Mar 5: LWAPP-4-CLIENTEVENTLOG %: no central Dhcp configuration file map to load. To connect to the controller to get the configuration file
* 18:19:06.907 Mar 5: % LWAPP-3-CLIENTERRORLOG: connected mode
* 18:19:07.323 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down
* 18:19:07.359 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 18:19:08.327 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 18:19:08.355 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 18:19:08.367 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down
* 18:19:08.375 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 18:19:09.407 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 18:19:09.411 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 18:19:09.587 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 18:19:09.595 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down
* 18:19:09.603 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 18:19:10.595 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to
* 18:19:10.595 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 18:19:10.631 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 18:19:10.639 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down
* 18:19:10.647 Mar 5: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 18:19:10.951 Mar 5: % FEDS-6-ACTIVATED: Signature of IDS is loaded and enabled
* 18:19:11.631 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 18:19:11.639 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 18:19:11.687 Mar 5: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 18:19:12.687 Mar 5: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to
* 6 Mar 01:03:58.255: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_WTP_EVENT_REQUEST
., 3)
* 6 Mar 01:03:58.255: % 3-CAPWAP-ERRORLOG: Retransmission count exceeded max, unaware that the ethernet is overloaded
* 6 Mar 02:28:52.326: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 02:28:52.326 Mar 6: Traceback-= 292514z 8B0264z 908868z 9093B8z 8BBD4Cz 8BE768z AFC544z AFD67Cz AFE838z B01DECz 5E6FC4z 5E73D0z 52E448z 52B028z 52B028z 52E510z
* 6 Mar 02:28:55.722: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 02:28:55.722 Mar 6: Traceback-= 292514z 8B0264z 908868z 9093B8z 8BBD4Cz 8BE768z AFC544z AFD67Cz AFE838z B01DECz 5E6FC4z 5E73D0z 52E448z 52B028z 52B028z 52E510z
* 6 Mar 02:28:58.518: aggr_params Assertion failed-> tcp_pkts_pending_aggr in dot11_ac_test_ready to 1136
* 02:28:58.518 Mar 6: Traceback-= 292514z 8B0264z 908868z 9093B8z 8BBD4Cz 8BE768z AFC544z AFD67Cz AFE838z B01DECz 5E6FC4z 5E73D0z 52E448z 52B028z 52B028z 52E510z
* 6 Mar 04:48:00.926: % 3-CAPWAP-ERRORLOG: County of Retransmission for package exceeded max (CAPWAP_ECHO_REQUEST
., 3)
* 6 Mar 04:48:00.938: % LWAPP-3-CLIENTERRORLOG: switch to standalone mode
* 6 Mar 04:48:00.938: % 3-CAPWAP-ERRORLOG: dating BACK to the DISCOVERY of FASHION
* 6 Mar 04:48:00.938: % DTLS-5-SEND_ALERT: send FATAL: close notify alert at 10.126.242.247:5246
* 6 Mar 04:48:00.986: % FEDS-6-persons with DISABILITIES: Signature of IDS is removed and disabled.
* 6 Mar 04:48:09.986: % 3-CAPWAP-ERRORLOG: could not resolve CISCO-CAPWAP-CONTROLLER
* 6 Mar 04:48:19.986: % 3-CAPWAP-ERRORLOG: MWAR selected ' xxxxxxxWLC001'(index 0).
* 6 Mar 04:48:19.986: % 3-CAPWAP-ERRORLOG: go join a capwap controller
* 6 Mar 04:48:10.000: % CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.126.242.247 peer_port: 5246
* 6 Mar 04:48:10.755: % CAPWAP-5-DTLSREQSUCC: DTLS connection created successfully peer_ip: 10.126.242.247 peer_port: 5246
* 6 Mar 04:48:10.755: % CAPWAP-5-SENDJOIN: send request to join 10.126.242.247
* 6 Mar 04:48:10.831: % 3-CAPWAP-ERRORLOG: white event 10 & combination State 5.
* 6 Mar 04:48:10.831: % 3-CAPWAP-ERRORLOG: CAPWAP SM Manager: unable to process the message status type 10 5.
* 6 Mar 04:48:10.831: % 3-CAPWAP-ERRORLOG: could not manage capwap control message from the controller
* 6 Mar 04:48:10.831: % CAPWAP-3-Journal of ERROR: failed to process the encrypted package 10.126.242.247 capwap
* 04:48:10.915 Mar 6: "Promiscuous" from Ethernet mode
* 6 Mar 04:48:11.635: % LWAPP-4-CLIENTEVENTLOG: OfficeExtend Localssid recorded Flash AP
* 6 Mar 04:48:11.727: ac_first_hop_mac - IP:10.126.134.1 Hop IP:10.126.134.1 IDB:BVI1
* 04:48:11.727 Mar 6: setting AC hop first MAC: 58f3.9cf2.5781
          
* 6 Mar 04:48:12.127: % CAPWAP-5-JOINEDCONTROLLER: AP joined controller xxxxxxxWLC001
* 6 Mar 04:48:12.175: % LWAPP-4-CLIENTEVENTLOG: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file
* 6 Mar 04:48:12.175: % LWAPP-4-CLIENTEVENTLOG: No. Flex ACL to load map configuration file. To connect to the controller to get the configuration file
* 6 Mar 04:48:12.175: % LWAPP-4-CLIENTEVENTLOG: map No. LS Flex to load ACL configuration file. To connect to the controller to get the configuration file
* 6 Mar 04:48:12.175: LWAPP-4-CLIENTEVENTLOG %: no central Dhcp configuration file map to load. To connect to the controller to get the configuration file
* 6 Mar 04:48:12.175: % LWAPP-3-CLIENTERRORLOG: connected mode
* 6 Mar 04:48:12.595: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down
* 6 Mar 04:48:12.599: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 6 Mar 04:48:13.599: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 6 Mar 04:48:13.647: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 6 Mar 04:48:13.659: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down
* 6 Mar 04:48:13.667: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 6 Mar 04:48:14.675: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 6 Mar 04:48:14.675: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 6 Mar 04:48:14.851: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 6 Mar 04:48:14.863: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to down
* 6 Mar 04:48:14.871: % LINK-5-CHANGED: Interface Dot11Radio0, changed State to reset
* 6 Mar 04:48:15.859: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to
* 6 Mar 04:48:15.863: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio0, state change downstairs
* 6 Mar 04:48:15.899: % LINK-6-UPDOWN: Interface Dot11Radio0, changed State to
* 6 Mar 04:48:15.911: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to down
* 6 Mar 04:48:15.919: % LINK-5-CHANGED: Interface Dot11Radio1, changed State to reset
* 6 Mar 04:48:16.223: FEDS-6-ACTIVATED %: Signature of IDS is loaded and enabled
* 6 Mar 04:48:16.899: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed State to
* 6 Mar 04:48:16.911: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Dot11Radio1, change of State down
* 6 Mar 04:48:16.959: % LINK-6-UPDOWN: Interface Dot11Radio1, changed State to
* 6 Mar 04:48:17.959: % LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed State to

Does anyone have any ideas?

Thank you very much!

Aggr_params of failure AP assertion-> tcp_pkts_pending_aggr (no crash)

Tags: Cisco Wireless

Similar Questions

  • Update 80070103 is a failure, and I get message that firefox is crashed!

    Update 80070103 is a failure, and I get message that firefox is crashed, how to install this update?

    Hello

    1 did you changes to the computer before the show?

    2. who is the antivirus installed on the computer program?

    3. the updates you are trying to install?

    4. that you get an error message when you work with Firefox?

    5. are you able to work with Internet Explorer?

    I suggest you to provide information about the update has failed.

    See the updates of Windows Installer
    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

    I suggest to refer to the article and complete the steps described in the article:

    Windows Update error 80070103
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

    See also:


    The problems with the installation of update
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    I suggest you to contact the support of Firefox about firefox:

    http://support.Mozilla.org/en-us/home

    I hope this helps.

  • Everytime I open Firefox I get a message: "an attempt to change your home page has been blocked" and firefox crashes

    Everytime I open Firefox I get a message: "an attempt to change your home page has been blocked" and firefox crashes.
    I unintalled (on my MAC) and reinstalled twice. Makes no difference. Any suggestions?

    Could you try starting Firefox in Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

    Does not work if Firefox: Hold down the option key when starting Firefox.

    If Firefox is running: You can restart Firefox in Mode safe mode using either:

    • button "3-bar" menu > "?" button > restart with disabled modules
    • Help menu > restart with disabled modules

    and OK reboot.

    Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

    Any improvement?

    While you are in Mode without failure, you could copy a list of your extensions and paste them into an answer? The best place for this is the support information page - either:

    • button "3-bar" menu > "?" button > troubleshooting information
    • (menu bar) Help > troubleshooting information
    • type or paste everything: in the address bar and press Enter

    Scroll down to the Extensions section, and then select from there until the end of the following table with the mouse and copy. Then paste into a response. It may seem a bit messy but don't worry, we're used to it.

    In addition, if you check your homepage settings, he changed? This article explains where to find that page preferences: start-up, homepage, tabs and download settings.

  • iMac 27 inch end of 2013 - constant beachballing, leading to the freezing and then crashing a

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-05-26 22:17:37

    Download https://etrecheck.com EtreCheck

    Time 04:15

    Performance: good

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    Click on the link [check files] help with unknown files.

    Verify the signatures of Apple: enabled

    Problem: Beachballing

    Description:

    Intermittent beach balling, followed by gel applications and then crashing one at a time, until the whole system crashes. Must be restarted by holding down the power button. It happens 1 - 2 times a day.

    Hardware information: ⓘ

    iMac (27 inch, at the end of 2013)

    [Technical details] - [User Guide] - [warranty & Service]

    iMac - model: iMac14, 2

    1 3.4 GHz Intel Core i5 CPU: 4 strands

    8 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 4 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 4 GB DDR3 1600 MHz

    0/DIMM1 BANK

    Vacuum

    BANK 1/DIMM1

    Vacuum

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n/ac

    Video information: ⓘ

    NVIDIA GeForce GTX 775M - VRAM: 2048 MB

    iMac 2560 x 1440

    System software: ⓘ

    OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

    Disk information: ⓘ

    ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 999,35 go-go (640,11 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    USB information: ⓘ

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. FaceTime HD camera (built-in)

    Mitsumi Electric Apple USB optical mouse

    Information crush: ⓘ

    Apple Inc. Thunderbolt_bus.

    Goalkeeper: ⓘ

    Mac App Store and identified developers

    Unknown files: ⓘ

    / Library/LaunchAgents/edu. Emory.oracle_java_whitelist.plist

    SH /Library/Scripts/Emory/oracle_java_whitelist.sh

    /Library/LaunchDaemons/com.deploystudio.lkdc_fix.plist

    / usr/libexec/configureLocalKDC

    2 unknown files found. [Check files]

    Kernel Extensions: ⓘ

    /Applications/Boxcryptor.app

    [no charge] com.boxcryptor.BCFS.filesystems.bcfs (3.1.0 - SDK 10.9-2016-02-12) [Support]

    / Applications/Toast Basic.app

    com.roxio.BluRaySupport [no charge] (1.1.6 - 2010-03-05) [Support]

    [no charge] com.roxio.TDIXController (1.7-2010-03-05) [Support]

    / System/Library/Extensions

    [no charge] com.m - audio .driver .firewire (1.10.2 - 2016-05-18) [Support]

    [no charge] com.m - audio .midisupport .driver .usb (M-Audio USB MIDI support 1.1 - 2016-05-18) [Support]

    com.paceap.kext.pacesupport.master [no charge] (5.9.1 - 10.6 SDK - 2016-05-18) [Support]

    com.palm.ClassicNotSeizeDriver [no charge] (3.2.1 - 2016-05-18) [Support]

    com.Tascam.usb2audio.driver [no charge] (2.10 - SDK 10.7 - 2016-05-18) [Support]

    tc.tctechnologies.driver.TCNear [no charge] (4.1.3 - 10.6 SDK - 2016-05-18) [Support]

    /System/Library/Extensions/PACESupportFamily.kext/contents/plugins

    com.paceap.kext.pacesupport.Leopard [no charge] (5.9.1 - 10.4 SDK - 2013-10-07) [Support]

    [no charge] com.paceap.kext.pacesupport.Panther (5.9.1 - SDK 10.-1-07-10-2013) [Support]

    [loading] com.paceap.kext.pacesupport.snowleopard (5.9.1 - 10.6 SDK - 2013-10-07) [Support]

    com.paceap.kext.pacesupport.Tiger [no charge] (5.9.1 - 10.4 SDK - 2013-10-07) [Support]

    /System/Library/Extensions/TASCAM_US1xx.kext/contents/plugins

    com.Tascam.usb2audio.driver_TIGER [no charge] (2.10 - 10.4 SDK - 2012-09-21) [Support]

    Startup items: ⓘ

    ciscod: path: / System/Library/StartupItems/ciscod

    ARD: path: / Library/StartupItems/ard

    EmagicA26A62mFirmwareLoader: Path: / Library/StartupItems/EmagicA26A62mFirmwareLoader

    M-audio FireWire Audio Helper: path: Library/StartupItems/M-Audio FireWire Audio Helper

    M - Audio Firmware Loader: path: Library/StartupItems/M-Audio Firmware Loader

    PACESupport: Path: / Library/StartupItems/PACESupport

    Startup items are obsolete in OS X Yosemite

    Launch system officers: ⓘ

    [operation] com.apple.Finder.plist (2015-08-23) - invalid signature!

    [loading] com.apple.FollowUpUI.plist (2015-08-23) - invalid signature!

    [loading] com.apple.ScreenReaderUIServer.plist (2015-08-24) - invalid signature!

    [loading] com.apple.powerchime.plist (2015-08-22) - invalid signature!

    [loading] com.apple.quicklook.32bit.plist (2015-08-22) - invalid signature!

    [loading] com.apple.quicklook.plist (2015-08-22) - invalid signature!

    [loading] com.apple.quicklook.ui.helper.plist (2015-08-22) - invalid signature!

    [loaded] 8 tasks Apple

    [loading] 151 tasks Apple

    [operation] 79 tasks Apple

    Demons of launch system: ⓘ

    org.Postfix.master.plist [failure]

    [loaded] 46 tasks Apple

    [loading] 153 tasks Apple

    [operation] 90 tasks Apple

    Launch officers: ⓘ

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-05-15) [Support]

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-10) [Support]

    [operation] com.adobe.AdobeCreativeCloud.plist (2016-02-24) [Support]

    [loading] com.adobe.CS5ServiceManager.plist (2011-11-11) [Support]

    [loading] com.cisco.anyconnect.gui.plist (12 / 12/2013) [Support]

    [operation] com.eastwest.server.plist (2010-06-10) [Support]

    [loading] com.mcafee.menulet.plist (2013-09-30) [Support]

    [loading] com.mcafee.reporter.plist (2013-09-30) [Support]

    [loading] com.oracle.java.Java - Updater.plist (2015-11-14) [Support]

    [loading] edu.emory.oracle_java_whitelist.plist (2014-01-16) [Support]

    [loading] org.macosforge.xquartz.startx.plist (2014-08-11) [Support]

    Launch of the demons: ⓘ

    [loading]    PACESupport.plist (2013-02-01) [Support]

    [loading] com.adobe.ARMDC.Communicator.plist (2016-05-10) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-10) [Support]

    [loading] com.adobe.SwitchBoard.plist (2013-12-14) [Support]

    [operation] com.adobe.adobeupdatedaemon.plist (2016-04-12) [Support]

    [loading] com.adobe.agsservice.plist (2016-04-12) [Support]

    [loading] com.adobe.fpsaud.plist (2016-05-09) [Support]

    com.Apple.aelwriter.plist [loading]

    [ongoing] com.Apple.Qmaster.qmasterd.plist

    [loading] com.boxcryptor.BCFS.KextLoaderHelper.plist (2016-05-22) [Support]

    [operation] com.cisco.anyconnect.vpnagentd.plist (12 / 12/2013) [Support]

    com.deploystudio.lkdc_fix.plist [no charge] (2009-03-10) [Support]

    com.LANDesk.broker.plist [no charge] (2010-01-20) [Support]

    [operation] com.m - audio .firewire .helper .plist (2011-07-28) [Support]

    com.McAfee.VirusScan.fmpd.plist [no charge] (2013-09-26) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    [loading] com.oracle.java.Helper - Tool.plist (2015-11-14) [Support]

    com.Quark.quarkupdate.plist [no charge] (2013-12-21) [Support]

    [loading] com.sibelius.sari.plist (2010-03-25) [Support]

    [loading] com.wdc.WDPrivilegedHelper.plist (2016-04-14) [Support]

    [loading] org.macosforge.xquartz.privileged_startx.plist (2014-08-11) [Support]

    tc.tctechnologies.TCNear.plist [no charge] (2013-07-16) [Support]

    Launch User Agents: ⓘ

    [loading] com.adobe.AAM.Updater - 1.0.plist (2011-11-15) [Support]

    [loading] com.adobe.ARM. [...]. plist (2012-04-16) [Support]

    [loading] com.apple.SafariBookmarksSyncer.plist (2011-11-10) - /Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/SafariSyn customer: Executable not found!

    [loading] com.google.keystone.agent.plist (2016-03-02) [Support]

    [operation] com.spotify.webhelper.plist (2016-05-21) [Support]

    User login items: ⓘ

    Application of database Microsoft Daemon (/ Applications/Microsoft Office 2011 / Microsoft/Office Database Daemon.app)

    Dropbox application (/ Applications/Dropbox.app)

    Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)

    WDDriveUtilityHelper Application (/ Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)

    Boxcryptor application (/ Applications/Boxcryptor.app)

    Other applications: ⓘ

    [ongoing] com.adobe.CCXProcess.231712

    [operation] com.adobe.acc.AdobeDesktopService.98912.A116CE4F-AB75-400E-AFF5-CE9A00F2A0B8

    [ongoing] com.Adobe.accmac.232032

    [ongoing] com.apple.AmbientDisplayAgent

    com.apple.BKAgentService [loading]

    com.apple.MailServiceAgent [loading]

    [ongoing] com.getdropbox.dropbox.48032

    [ongoing] com.HP.devicemonitor

    com.LANDesk.broker [loading]

    com.McAfee.VirusScan.fmpd [failure]

    [ongoing] com.westerndigital.WDDriveUtilityHelper.182112

    [ongoing] org.Mozilla.Firefox.148512

    tc.tctechnologies.daemon.TCNear [loading]

    [loading] 409 tasks Apple

    [operation] 214 tasks Apple

    Internet Plug-ins: ⓘ

    AdobePDFViewerNPAPI: 15.016.20039 - SDK 10.11 (2016-05-15) [Support]

    Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-18) [Support]

    iLokClientHelper: 3.1 (2008-05-26) [Support]

    AdobePDFViewer: 15.016.20039 - SDK 10.11 (2016-05-15) [Support]

    Scorch: 6.1.0 (2010-04-23) [Support]

    iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-18)

    DirectorShockwave: 11.5.8r612 (2010-08-18) [Support]

    QuickTime Plugin: 7.7.3 (2016-05-18)

    FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-18) [Support]

    PDF Browser Plugin: 2.4.4 - SDK 10.6 (2012-03-13) [Support]

    AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-12) [Support]

    F5 VPN SSL Plugin: 7091.2013.1208.1 - SDK 10.8 (2014-06-09) [Support]

    MeetingJoinPlugin: Unknown - SDK 10.6 (2014-11-20) [Support]

    Musicnotes: 1.18.8 (2010-09-21) [Support]

    Silverlight: 5.1.41212.0 - SDK 10.6 (2016-02-11) [Support]

    Default browser: 601 - SDK 10.11 (2016-05-18)

    Flip4Mac WMV Plugin: 3.2.0.16 - SDK 10.8 (2013-12-13) [Support]

    SharePointBrowserPlugin: 14.6.4 - SDK 10.6 (2016-05-11) [Support]

    JavaAppletPlugin: Java 8 update 91 build 14 version Check (2016-04-21)

    OfficeLiveBrowserPlugin: 12.3.0 (2011-08-03) [Support]

    Audio plug-ins: ⓘ

    DVCPROHDAudio: 1.3.2 (2010-10-21)

    TASCAM_US1xx: Unknown - SDK 10.7 (2012-09-21) [Support]

    3rd party preference panes: ⓘ

    Flash Player (2016-05-09) [Support]

    Flip4Mac WMV (2013-03-29) [Support]

    Java (2016-04-21) [Support]

    Time Machine: ⓘ

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 999,35 GB disc used: 359,24 GB

    Destinations:

    Helen backup [Local]

    Total size: 2.00 TB

    Total number of backups: 40

    An older backup: 10/18/15, 20:39

    Last backup: 15/05/16, 01:47

    Size of backup drive: adequate

    Size of backup 2.00 TB > (disc 359,24 GB X 3)

    Top of page process CPU: ⓘ

    14% kextd

    6% McAfee Reporter

    4% WindowServer

    com.HP.devicemonitor 2%

    kernel_task 2%

    Top of the process of memory: ⓘ

    Kernel_task 725 MB

    614 MB mdworker (34)

    Firefox 418 MB

    180 MB mds_stores

    Dropbox 147 MB

    Information about virtual memory: ⓘ

    2.91 GB of free RAM

    5.08 used GB RAM (2.67 GB being cached)

    Used Swap 0 B

    Diagnostic information: ⓘ

    26 May 2016, 22:16:24 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221624_[redacted].crash

    / usr/local/McAfee/FMP/bin/pgme

    26 May 2016, 22:16:14 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221614_[redacted].crash

    26 May 2016, 22:16:04 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221604_[redacted].crash

    26 May 2016, 22:15:54 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221554_[redacted].crash

    26 May 2016, 22:15:44 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221544_[redacted].crash

    26 May 2016, 22:15:34 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221534_[redacted].crash

    26 May 2016, 22:15:24 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221524_[redacted].crash

    26 May 2016, 22:15:14 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221514_[redacted].crash

    26 May 2016, 22:15:04 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221504_[redacted].crash

    26 May 2016, 22:14:54 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221454_[redacted].crash

    26 May 2016, 22:14:44 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221444_[redacted].crash

    26 May 2016, 22:14:34 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221434_[redacted].crash

    26 May 2016, 22:14:24 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221424_[redacted].crash

    26 May 2016, 22:14:14 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221414_[redacted].crash

    26 May 2016, 22:14:04 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221404_[redacted].crash

    26 May 2016, 22:13:54 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221354_[redacted].crash

    26 May 2016, 22:13:44 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221344_[redacted].crash

    26 May 2016, 22:13:34 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221334_[redacted].crash

    26 May 2016, 22:13:24 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221324_[redacted].crash

    26 May 2016, 22:13:14 /Library/Logs/DiagnosticReports/fmpd_2016-05-26-221314_[redacted].crash

    26 May 2016, 21:59:09 /Library/Logs/DiagnosticReports/rpc.net_2016-05-26-215909_[redacted].crash

    /usr/sbin/RPC.NET

    26 May 2016, 21:57:13 self-test - spent

    24 may 2016, 22:00:26 /Library/Logs/DiagnosticReports/rpc.net_2016-05-24-220026_[redacted].crash

    24 may 2016, 21:44:36 /Library/Logs/DiagnosticReports/rpc.net_2016-05-24-214436_[redacted].crash

    24 may 2016, 21:15:13 /Library/Logs/DiagnosticReports/rpc.net_2016-05-24-211513_[redacted].crash

    24 may 2016, 21:04:21 /Library/Logs/DiagnosticReports/rpc.net_2016-05-24-210421_[redacted].crash

    May 23, 2016, 22:25:42 /Library/Logs/DiagnosticReports/rpc.net_2016-05-23-222542_[redacted].crash

    Uninstall the McAfee software according to the manufacturer's instructions, to see if this brings improvements.

  • Random BSOD and program crashes, getting tired of this.

    I've probably become crazy trying to solve this problem and as soon as I try to let Windows search for a solution to these problem it gives me this * damned * * * error telling me that the problem is not possible, ironically, and now I'm distraught about what I'm supposed to do. In recent days, my computer started sporadicaly bluescreen and games crashing became regular events at this stage, as well as my sound card to randomly crash, requiring a reboot.

    Cazral

    7 different causes in 12 accidents.  Pointing to the corruption of memory.  I FIRSTLY run Malwarebytes, then so clean run the other two tests

    Please download the free version of Malwarebytes.
    Update immediately.
    Do a full scan of the system
    Let us know the results at the end.

    http://www.Malwarebytes.org/products
    These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

    * Don't forget to download any other DMP files (especially those running auditor)

    * If you are overclocking reset all default before running these tests.
    In other words STOP!   If you don't know what it means that you're probably not

    1 - Memtest.
    * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. http://www.memtest.org
    * Boot from the CD and let it run at least 5 or 6 passes.
    * Don't forget, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
    * Test the sticks individually and if you find a good, test it in all slots.

    Any error is indicative of a memory problem.
    If a well-known stick fails in a slot of motherboard, it's probably the slot.


    2. Driver Verifier

    Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

    * But sometimes it will crash and will not tell you the driver.
    * At other times it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
    * I would suggest that you first back up your data and make sure that you have access to another computer so you can contact us in case of problems.
    * Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    * Under Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

    Here is the procedure:

    -Go to start and type "auditor" (without the quotes) and press enter
    -Select 'Create a custom settings (for code developers)' and click 'Next '.
    -Select "Select individual settings from the list complete" and click "Next".
    -Select the entire document except for "Low resource Simulation" and click "next".
    -Select "Select driver names from a list", then click "next".
    * Select all drivers that are NOT supplied by Microsoft and click on "Next".
    -On the next page, select "Finish".
    * Restart the system and wait as he crashed to blue screen.
    * Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.


    * If you are unable to Windows because it crashes too early, try safe mode.
    * If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

    * Further reading
    http://support.Microsoft.com/kb/244617

  • Lightroom 4: message when opening assertion failure [was: help]

    I download lightroom 4 from a cd and he tells me the assertion failure when I try to open the program.

    Try

    http://forums.Adobe.com/message/4260633

    http://forums.Adobe.com/message/4608548

  • ORA-29516: Aurora assertion failure

    Hi all
    I tried to run java code in PL/SQL via SQLplus. What I have before running the code, have been:
    1. created and compile the code.
    2. load the class
    3. creating PL/function SQL, which is a wrapper for the java function.
    All the steps have been executed successfully, but when I tried to run the PL/SQL function, I got:
    SQL> EXEC DBMS_OUTPUT.PUT_LINE (fdelete('/home/oracle/some_file.txt'))
    BEGIN DBMS_OUTPUT.PUT_LINE (fdelete('/home/oracle/some_file.txt')); END;
    
    *
    ERROR at line 1:
    ORA-29516: Aurora assertion failure: Assertion failure at eox.c:359
    Uncaught exception System error:   java/lang/UnsupportedClassVersionError
    ORA-06512: at "HR.FDELETE", line 1
    ORA-06512: at line 1
    What is the problem?
    SQL> select * from v$version;
    
    BANNER
    --------------------------------------------------------------------------------
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for Linux: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    
    oracle@firefly]$ java -version
    java version "1.6.0_26"
    Java(TM) SE Runtime Environment (build 1.6.0_26-b03)
    Java HotSpot(TM) 64-Bit Server VM (build 20.1-b02, mixed mode)
    [oracle@firefly]$ java -jar ojdbc5.jar
    Oracle 11.2.0.1.0 JDBC 3.0 compiled with JDK5
    [oracle@firefly]$ java -jar ojdbc6.jar
    Oracle 11.2.0.1.0 JDBC 4.0 compiled with JDK6
    Help, please
    Best regards
    Val

    Hmm, you could test your class with the target indicator, compilation setting the classfile to 1.5 compliant. I.e. "javac - target 1.5 '.»» I'm not at all familiar with this Java running inside the thing of the Oracle, but it's worth a try.

  • Firefox and display Crash?

    BP-fb2246bb-898A-4525-90ef-fd4ac2151005

    I walked away for a bit and when I came back, both my monitors had ceased a little (not sleep or screen saver) and Firefox crashed. Above is the crash report. I don't know what happened.

    • Firefox 41.0.1 Crash report [@ UMDevice::CreateShaderResourceView (D3D10DDI_HDEVICE, D3D11DDIARG_CREATESHADERRESOURCEVIEW const *, D3D10DDI_HSHADERRESOURCEVIEW, D3D10DDI_HRTSHADERRESOURCEVIEW)]

    Try disabling the D3D chain by setting layers.d3d11.disable - string true on the topic: config page.

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

    You can try to disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

    You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

    I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

    No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

  • Satellite Pro L40 and it crashes and freezes

    Hi guys

    I have a Satellite Pro L40 and it crashed on me a few weeks ago.
    It will turn upward, but everything freezes.

    They gave me a copy of Vista to friend, but this only loads until it said 74.5 MB necessary and only 74.4 on the partition so I guess it does not load the full program of vista.

    I don't have the original backup drive so cannot use it.
    Is my only need to get a new hard drive and if what kind do you recommend.

    Sorry if I have'nt it explains very well

    Derek

    In my opinion, it is always good to have original Toshiba DVD facilities. If you want to order a visit https://backupmedia.toshiba.eu/landing.aspx, and how much you should pay for it.

    As Akuma wrote before starting installation Vista delete existing partitions, create new and install Vista on it. I don't think that you need a new HARD drive.

  • Satellite A60 summary failure and press a key to continue

    I have a problem with my satellite A60.
    I had the computer for about a year and a half and have never had any serious problems with it of any kind. However, last week the keyboard started to fail, first with only a few keys, then the full keyboard.

    It never bothered me much because I'm quite familiar with the Toshiba computers. So I connected an external keyboard, and I was back in business.

    I used it very well so far but I put the computer into hibernation last night and when I woke up this morning he said "resume failure and press a key to continue."
    I have keys and nothing happens, it just stay on this screen. I try to access BIOS by pressing ESC when I turn on the computer and the priority is set at STARTUP DO not RESUME, hover, it won't let me highlight to change anyway. The computer won't let me boot from the cd. Basically, it's just stuck on the screen and that's all.

    I wonder if there is another way to get around this or is my computer ended for good. I was running fedora linux at the time of the accident.

    Seems difficult but not insoluble it s...
    It resembles a hardware problem, but I won't for sure.

    This keyboardthing can be a defective keyboardcontroller, because your description of the error is describing a similar case that I got with my camera.
    I send the machine to my local servicepartner and they exchanged my motherboard and keyboard and after repair of the error, I had never bothered me again.

    Just a quick question: some fluids come from on your keyboard?

    Have a nice weekend

    Welcome them

  • Since I upgraded my MacBook Pro does work ' t toolbar, and safari crashes constantly. How can I solve this?

    Since I upgraded my MacBook Pro does work ' t toolbar, and safari crashes constantly. How can I solve this?

    Turn off the Suggestions of Safari in the preferences/Safari/search / uncheck Safari Suggestions.

    Latest issue of the Safari search bar

    http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/

  • I was using my MacBook today and it crashed and the dock turned silv, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock turned

    I was using my MacBook today and it crashed and the dock turned silver, I restarted the mac and it was always the same, then I loaded the disk utility and checked the disk and it says disk is fine. It flashes inconsistently gray and the dock has transformed money! I tried to restore Mac OS and then also the same!
    OS El Capitan

    This can help:

    Reboot safe mode (it is a slow process):

    -stop of the mac

    -Start up the mac in shift, press and hold until you see appear it to progress bar, so you can let go

    -When everything started, connect

    -Once connected, stop the mac once again, nothing else is necessary.

    -restart normally.

    Lex

    PS: This clears all system caches.

  • Resize the system checkbox and radio buttons system

    Is it possible to resize the system checkbox and radio buttons system. If we right click on one of them and go to properties, size controls are disabled. I wonder if it's feasible.

    Also I noticed that I could add the new radio buttons to do a right-click and choosing Add new button. Is it possible to achieve this programattically.

    Kind regards

    Austin

    AustinCann wrote:

    Is it possible to resize the system checkbox and radio buttons system. If we right click on one of them and go to properties, size controls are disabled. I wonder if it's feasible.

    As mentioned, system controls cannot be customized, because they depend on the windows theme. However, here are some Boolean values, so all you need to do is use an ordinary Boolean value and import the graphics that you want in the case of true and false. They can easily be made to look like an oversized check box. More details, especially about radio buttons can be found here.

    AustinCann wrote:

    Also I noticed that I could add the new radio buttons to do a right-click and choosing Add new button. Is it possible to achieve this programattically.

    You could probably do it in edit mode programmatically by using scripts. You can't do it at run time.

    To fill a RadioButton with new Boolean values, you can simply drag the new values Boolean inside or even shift-do drag an item to create a copy of it. Don't forget to change the labels to something intuitive.

  • the screen is huge, after a clean install of XP and IE crashes after opening

    Hello. I hope someone can help. I had a nasty virus my virus program has not detected in time. After that that he has been detected and deleted my computer did not work well. the virus program had deleted some files from XP to base when he got rid of the virus. I tried to repair windows with the XP cd, but my HARD drive freeze. Well I ended up getting a new HARD drive and I full format before installing windows xp. XP installed fine and I then progressed in the installation of all the drivers that came with my computer, when it was new, which was about 15 CD. Well now, I have more problems. my screen is HUGE and I am unable to change the screen meanless and IE crashes after opening. until I reinstalled windows, I took my wireless card and reinstalled after installing windows. It shows that I have a good internet connection, but it still crashes. can anyone help. my XP cd has SP2 on it.

    You want to get your computer up to date. You can get SP3 from here and there are more than 100 + updates after the SP.

    Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

    I hope this helps.

Maybe you are looking for