17-f151nm Pavilion: Pavilion 17-f151nm hardware upgrade

Similar Questions

• HP Pavilion dv 6000: hardware upgrade for hp pavilion dv 6000

  I have an old hp pavilion dv 6000, I recently upgraded to windows 7 and everything works well, but I would like to make the hardware upgrades as well.

  I want to move to maximum capacity, specifically: processor, graphics card, hard drive, and wireless network card.

  If someone can provide me with a list of known compatible with my system hardware would be great, I'll also be open to any suggestion of additional hardware upgrade if someone propose

  Hello

  Two things, you will not be able to upgrade: display the card and wireless network card.

  (a) graphics card: we cannot spend more than 90% of laptops, including yours,

  (b) wireless network adapter: your machine was built before the mid-2014, the whitelist prevents you to upgrade the wireless card.

  Now, you have 2 items to upgrade (maybe 3): hard drive and the processor (CPU) (and maybe RAM)

  (a) HARD drive: any 2.5 "HDD or even SSDS with 9.5 mm or less. SSD is more expensive but faster. HHD, please select the one that has RPM faster (7200 RPM), large cache (more is better). They are numerous on the following list including SSD:

  http://www.centrecom.com.au/notebook-hard-drives

  (b) for the processor, please use following 5-69 of the manual page to buy the right part of HP. Please do not ask me why to buy at HP.

  http://h10032.www1.HP.com/CTG/manual/c01035677.PDF

• Pavilion dv6 7039tx: hardware upgrade

  I have a pavilion dv6 7039tx. It is out of warranty. Is it possible to replace the display unit from my laptop to the 720 p at a full HD 1080 p? I would also ask if the keyboard can be replaced with a backlit? Thanks in advance for a solution.

  Hello

  Through page 23, 24, 28, 57-60, 88-95 in the manual.

  Two upgrades are possible. Consult the Manual HP part number of the FHD (1080 p) display panel & display cable and keyboard with backlight option listed.

  http://h10032.www1.HP.com/CTG/manual/c03582006

  Concerning

  Visruth

• HP pavilion star wars: hardware upgrade

  I have a 2 GB 940 m installed nvidia. Can I upgrade to a higher version? Also can I install an ssd without replacing the current hard drive?

  Video update; lol the video is soldered to the motherboard and is not editable.

  It doesn't have the ability to drive hard m2 of WSSD "gumstick" increasingly the 2.5 inch SATA drive.

  Repair manuals

  See p. 53 of the manual.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• P7-1234 Pavilion: I have a p7-1234 Pavilion and want to upgrade the video card.

  I have a p7-1234 Pavilion and want to upgrade the video card. I am currently the EVGA GeForce GT 610 2048 MB GDDR3. This card will work with it?

  This is a power supply that will work for you:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139048

  It is modular allowing you to use only the necessary cables.  This means that there is more room inside the circulation of air.  He is also a 600W which will give you extra power for the possible future upgrades.  Any block of power SUPPLY Corsair will be good.  They are fans of the quality products for a reasonable price.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location

  ordered a pavilion with graphics card upgrade, upgrade used only 16-bit location. I want to connect a second monitor, can I use the parent connections card currently have coverage through them that say "do not remove"?

  Hello

  If you use an adapter, then you have the choice on the end to use the adapter based on the adapter that you use. Buy cable HDMI to DVI and save frustration adapter problems and possible.

• Satellite Pro C660-2I - hardware upgrade

  Hey there, I was wondering if it is possible to update the graphics card, sound card and processor on this laptop? Please tell me you need to know

  Mobile units are no built like desktop computers and these updates is not possible. Hardware upgrade on laptops is very limited and can be done with the RAM and HARD drive.

  If you need machine with more performance is upgraded RAM up and implement faster SSD HARD drive or you need to buy the new laptop.

• Tecra S3: hardware upgrade - CPU, RAM, HARD drive

  Hello

  I just got a laptop from my company and it's 2 a bit slow for what I do, so please advise me on a hardware upgrade or point me in the right direction to ask this question.

  My Tecra is S3 model PTS30E - 01P01CG3 Y5120397H series, it is about three years old and I would like to upgrade:

  1 - CPU Intel Pentium M1.86 gHz, I can replace it with a dual core or core 2 duo of?
  The motherboard does it take? What is the most powerful CPU it can use?

  2-ram memory is 1 GB and I want to place as much as possible. 2 GB is the best that I can place?
  Can you recommend a brand of RAM which would give exceptional results?

  3-disk HARD 80 GB comes, and I also want to know if I can replace it with a bigger?
  Than do options GB 120 GB, 160 GB, I have more? These HDD fit as the size in my laptop?

  4-If you have any other recommendation of dope performance, please let me know.

  I live in Romania, I'm not sure where can I make these upgrades. What is the nearest place?

  Thank you and have a nice day.
  Florin.

  Hello Florin

  Tecra S3 is old enough laptop model, and expect too much with upgrades, especially with the CPU. Of way General CPU cannot be upgraded and perhaps should not be upgraded. Each laptop model has a specific design and cooling modules are optimized for the specific hardware platform.

  1. so, for you it is important to have the laptop stable without damaging the hardware. Okay, just for the record
  Tecra S3 comes with separate Intel Mobile Pentium-M processors - [1.73GHz/1.86GHz/2.0AGHz (0.748-1.356V)/2.13GHz (0, 748 - 1.372V))]
  [/ 2.26 GHz (0, 748 - 1.404V)] and these processors operate at 533 MHz bus clock.
  Update CPU not is also not supported if forget it. The CPU you have inside is powerful enough. What you need is more RAM and perfectly configured and optimized operating system.

  2 RAM can be upgraded up to 2 GB and it is not the problem. You can use 2 x 1 GB RAM DDR2-400/533 1 GB (PA3411U-1M1G).
  This RAM is tested and works perfectly with your Tecra S3 of will be.

  3 disk HARD upgrade is also not problematic. Tecra S3 uses SATA HDD and you can improve it with more than 120 GB. I'm 100% sure that you can use 160 GB with no problems.
  In my opinion, that's good enough. Isn t it? ;)

  4. optimize the operating system. Disable all unnecessary background processes and your Tecra will be working perfectly.

  >.. .i don't know where I can make these upgrades.
  Do it alone. It is not so complicated. If you need help let us know.
  Good bye

• The hardware upgrade on HP computers

  Here is a video that illustrates the hardware upgrade on HP computers

  I hope this helps.

  Good luck!

• Hardware upgrade of 4 servers windows 2003 7

  I just upgraded my Commvault software to version 9, with de-DUP.

  I noticed that my CF band is only changing to 100bm Brook.

  I read on the hardware upgrade to version 7.

  I have 14 VM to upgrade all the 2003 win. All have the latest tool installed 4.1

  Is there a there has been has I should look for before I start to put it off?

  before upgrade you the virtual hardware, you must upgrade the comment of VMware tools.  In an engine, the customer is off State, you can upgrade the virtual hardware.  From there on, turn on the prompt, login, let windows find all new device drivers and then restart again.  Here you connect and remove all devices shaded in Device Manager... Usually, restart us once more after that.

  With regard to the witch hunt.  If you are concerned, you can always snapshot the prior comments to the upgrade and if there are problems, return back.

  See the KB article how to properly uninstall the old drivers

  http://support.Microsoft.com/?kbid=269155

• ESXi host and VM hardware upgrades

  Hi all

  I pretty well know the answer to these questions (I like to read manuals), but I just wanted a few reassuring those who have ventured in front me.

  1 / when the upgrade to ESXi hosts of 3.5 to 4.0, it is my understanding that there is no real emergency in the upgrade of the host of the virtual computer (tools and hardware to version 7) as vSphere 4.0 will run happily with the older virtual machine (but without the new features).  However, I am wondering if anyone has experienced problems do not upgrade the machine virtual shortly after the upgrade of the host.  My intention is to do it very shortly after, but sometimes the best-laid plans go out the window in my role, so I'd feel comfortable if I new I could run the old VM indefinitely without any problem.

  2 / how 'security' is upgraded version of the VM from 4 to 7 material?  VMware I don't expect any problems, but I would like to know if anyone has experienced problems that can cause interruptions of service extended to the VM guest.

  Thanks in advance,

  Steve.

  1. I would separate between VMware tools and hardware upgrade. New tools not only to upgrade virtual hardware drivers, they also inflating to update and other features VMware uses to communicate with the guest operating system. In my opinion, you should pass the VMware tools as soon as possible. I can't say for sure if you have any questions without upgrading. My personal opinion/experience, is that during the "normal" old tools will.

  The hardware upgrade should not too important. In environments with hundreds of guests, you will actually have to update all hosts (in a cluster) material in order not to lose the capacity of invited guests 3.5 vMotion.

  2. the only issues I've had so far with the upgrade of the hardware have been networked. I had a few VMs to reconfigure the network manually after the upgrade.

  André

• Snapshot before VM hardware upgrade?

  Hello people,

  I read a lot of conflicting information around it, so thought I would ask here.

  We are going to be upgrade to vSphere 4.0 soon and of course will focus on the hardware upgrade of the virtual computer to version 7.

  Now, if I take a snapshot before you do the upgrade of HW and it goes pearshaped can I go back to the snapshot and the server will work?

  Or is it a one-way change, even with a snapshot in place?

  Same Xtravirt, which are usually about money, seems a bit confusing:

  ()http://xtravirt.com/do-i-upgrade-vmware-virtual-hardware-version-7( )

  They say:

  "When you upgrade virtual hardware version 3 to version 7, the upgrade is irreversible, even if you take a backup of virtual machine or a snapshot before you perform the upgrade.

  Then later in the same article:

  "using snapshots will give you the opportunity to come back if there is a problem."

  Thanks in advance.

  HW version 3 refers to the VM for instance ESX 2.x (see KB1003746 - versions of virtual machine hardware)

  I never upgraded to this version, so I can't say whether this is true or not. However, it is possible to return to a HW version 4 improved virtual computer. VUM proposes explicitly to take a snapshot before upgrading hardware.

  André

• Pavilion REF m6: B9A90EA #AKE: hardware upgrade

  I have a Pavilion m6 1060sq with AMD APU A8.

  It is posible to upgrade with AMD A10 APU?

  Or what part of the hardware can be upgraded, excluding RAM, HARD drive and optical drive?

  At the present time all the Service manuals are down, so we cannot access specific information, but more often HP laptop computers with an A8 processor can be upgraded to the A10. Bear with us a day or two, and we can tell you exactly which processor. An upgrade of an APU A10 will also improve the graphics very slightly. Who will be the only possible upgrade to something other than the three you mention. The King of updates will be an SSD.

• HP Pavilion dv6730en Hardware Upgrade

  Hello

  I have a HP Pavilion dv6730en I want to upgrade. When I bought it, it had Windows Vista Home Premium (32 bit) but I recently upgraded to Windows 7 Ultimate (32 bit) and thought why not also increase the RAM at least. Currently, it has 1 GB of RAM and would like to know the maximum RAM. I did some research and this is what I found:

  According to the product page, the maximum RAM is 2 GB. (If need be check following link: http://support.hp.com/us-en/document/c01326425).

  If it was what I found, I wouldn't bother you, but I've also met the following page (http://support.hp.com/us-en/document/c00820047) that connects maximum RAM for the operating system. (I chose the dv6730en as my product so I suppose that the page was thought to make the product as well).

  Is maximum depends on RAM hardware or software?

  Kindly advice because I do not want to buy two 2 GB modules and make account work or buy two modules of 1 GB and discover it could further support.

  PS: Sorry for the long post!

  I think that the service and maintaince guide, which indicates the maximum of 4 GB of support... The only problem, I confirmed to you, is because I don't have the camera with me now, check to see if something that I was hoping I could get from somewhere...

• HP Pavilion dv8113cl Notebook PC Software/Hardware Upgrade

  Hello everyone. I have a HP Pavilion dv8113cl laptop. It has great sentimental value for me, it is easy for me to use. I have grown very fond and attached to this old beast but I realize it's time to upgrade. I need tips on how to level and with what type of material. It has a unique feature, as I understand it. It has a hard drive Bay double housing two drives Toshiba MK8032GAX (5400 RPM) of 80 GB that are always in IDE. I know that I have to go but what and how do I do. I am currently running Windows 7 Ultimate 32 - bit on it.

  Thank you very much and have a great day.

  Those who are very cool old cell phones. The problem is that there is not much room to upgrade. I think that they max to 2 GB of RAM. Windows 7 32 bit will be the best OS, but it will be limited by using no more than 2 GB of RAM. You can use only hard disks IDE and those who become very difficult to find and expensive. My best advice if you need to keep it is upgrading the main hard drive to an SSD (solid state drive). They are of the IDE/PATA SSD, but they are expensive and have limited capacity.

  Here's a concert 128 SSD IDE/PATA:

  http://www.Newegg.com/product/product.aspx?item=9SIA1K60RW7578

  $140 isn't too bad but keep in mind, probably more than the laptop is worth. However if you install it and put a fresh load of Windows 7 32 bit on it, you'll get a much faster computer.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.