1F1 Saellite C660 - cannot start the machine?
Ive had machine about 6 months. Tempted to put on yesterday, it seems to start as usual, the Toshiba screen flashes up (where he mentions F 2 and F12 for menus) and then the screen goes all white and nothing happens. Forgive me, I'm a novice and struggling to find what to do. Can anyone offer advice please?
Hello
You can access the BIOS?
Immediately after the laptop has been powered, press F2.
In the BIOS, please check if the HARD drive is listed and recognized.
If the HARD drive is not listed, this means that the HARD drive is not recognized by the BIOS, and that means that it s faulty.
You can also check if you can run HARD drive recovery.
Switch on the device, press F8, and then select Repair my computer, then choose disk HARD recovery. This would reinstall the OS and fix the laptop back to factory settings.
Tags: Toshiba
Similar Questions
-
Satellite C660 - cannot start the facial recognition software
When I try to run face recognition software I get a window saying to contact my administrator - I have the status of administration on the Satellite C660 laptop.
Research forum that I found did not help in any time I try and follow the advice, I still get the same message. The laptop is new.
Hello
I think that this tool is confusing upward in some way. Therefore, the first thing that should be judged is a new software installation. I recommend you to uninstall this tool first.
You can do it is Panel-> softwareAfter the uninstall, it would be recommended to clean the registry. This can be done by using a software like CCleaner.
After that, download Toshiba face recognition software pilot European page and install again.Good luck
-
Cannot start the unit because the authorization service is not running - cannot start service
I'm weirded out. When I try to start the unit on my VM, I get the following message:
The Virtual Machine cannot be set to Unity mode because:
-The VMWare authorization Service is not running.So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):
Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.
Event Viewer is a little more detailed... But not really useful:
Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)
NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.
Technical details:
Host: Windows XP SP3 (French)
Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.
VMWare: 7.0.0 build-203739
Client: Windows XP SP3 (English)
I have attached my log of vmware just in case. Will be extremely grateful for any help!
Thank you!
The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;
Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86
Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3
and repeat once more for authd thereafter;
Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd
"%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd
Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3
If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.
Joakim
BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.
-
PROTECTED 2010 cannot start the Slimline Combo drive
Hello
I have two Portege 2010 with two different Slimline Combo drive for Cardbus cable - no two computers are able to start readers Slimline Combo. Two computers with each different drive have been works perfectly in early September, but none now.
A computer does not recognize the drive of all - the other answer in the hardware profile, it cannot start the drive.
Both computers are running Windows XP 2nd edition.
????
Thank you
Best regards
Anne Mette VossHello
Do you mean that the external CD/DVD drive for PC card cannot be recognized in Windows XP?
Hmm I think I have an idea.
I think you should go to the Device Manager and remove the * Texas Instruments PCI controller card bus * and * Toshiba ToPIC100 CardBus controller *.
Reboot the laptop.After restarting, the operating system must install new hardware (two controllers carbs) and after this installation, you can try to connect the external PC card, CD/DVD drives again!
Good luck
-
Cannot start the DSC Shared Memory
I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.
I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.
Thank you!
Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...
-
original title: Halo 2 for windows vista
Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer. It will not work in single user either...
Hello
Plase make sure you have the latest version of the GFWL Client installed:
http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx
-
Cannot start the network connection: invalid access to memory location
Hi team,
Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location. Can you help me on this issue?
Thank you
Sangaré
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
-
On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?
Hi jdmanel,
NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756
Follow the steps in the article.
You cannot start the Windows Firewall service in Windows XP SP2
Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users
For reference:
How to manually open ports in Internet Connection Firewall in Windows XP
-
How can I solve unless I need to have this problem to download protection software.
Hi Octavia10,-What version of service pack of Windows XP you are using?Try the methods listed in the given article to resolve this problem:Note: The steps are applicable to the other version of Windows XP as well. -
I cannot start the Windows Firewall, I get an error 0x6D9 code
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
Original title: error 0x6D9 Code
I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.
Thank you.
1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.
2. you do not do so in respect of the services? You do it in this way? ...............
Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...
under status, it lies and must say... Has begun
under Type of status, it must be said... Automatic
If it does not say that, right click on Windows Firewall > properties...
in Startup Type, click on the pointer, and then select Auto
to the service status, click Start
Click OK when finished.
-
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
These error messages are a pain in the neck to extract useful information.
I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.
If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.
Realtek and NVIDIA, for example get stuff good free audio driver.
If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period
-
Windows cannot start the firewall service.
Original title: my firewall stopped working and it won't let me turn it back on.
My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?
Hey, bed,.
File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.
Information available at:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot start the peer name resolution protocol Protocol
No p2p service means no homegroup, which means no access to other computers or to the wireless printer... He worked a few months ago, and now, the protocol name resolution by peers, well defined to automatic, does not start, even if I click on properties, etc. and ask him to startr. I have ' windows cannot start the Protocol PNRP, error 0 x 80630203.»
I still have unresolved problems with backups, so I don't want a new installation of windows.I'm getting so fed up with all the unsolved problems of windows! is windows 8 is going to be better?Thanks for your help.Hello
Please keep us updated.
You can read the articles below and see if it helps:
Add a device or computer to a network
http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
Share files via public folders
http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders
If you need further assistance, please answer and we will be happy to help you.
-
Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service
Windows cannot start the Diagnostic Policy on Local Computer Service?
Original title: error 1079
Hi Craig,.
Thanks for posting your question in the Microsoft Community.
From your post, it seems you are getting and error 1079.
The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.
What service are you trying to start?
We will follow the steps in this link and check if this solves the problem.
Thanks for posting the result and let us know if you need help on Windows.
-
Cannot start the application - error code 8
I'm running one of my own apps and I get this message:
"Cannot start the application - error code 8.
What is the error code 8? Where can I find a list of all error codes?
Thanks in advance
If you get error 8 or 13, and that everything you did is OK for this:
-Uninstall all versions of your application
-Restart the playbook
-Install and run again
Maybe you are looking for
-
the question is almost finished.
-
Heart rate will appear in the Ap health
I have an Iphone 6 and Apple Watch. Heart rate is displayed on my watch during the race, but I can't understand how to display data HR on my Iphone in the Ap of health. Research on the problem, I found it is supposed to be an HR option listed under
-
My has a Decive PCI driver! mark next to it, so I tried to update, and it wouldn't let me. So my question is the following how can I fix this problem? Y at - it an update for him or what I need to uninstall and re install it or what I can do? Thank y
-
LabVIEW cDAQ automatic selection of the device?
First off, I want to say that I am in no way a developer for LabVIEW, but I'm competent with as applications and have done a little with it. That being said: We have a vi that runs to collect data using a NI 9215, we took that vi and converted to an
-
Update of Adobe Flash and the player crashes.
Original title: Update of Adobe Flash and Reader Hello Recently I tried to update my Adobe flash and reader. I get through all parts of it, but when it comes to the part of screen download simply of freezes and does not complete the download. Is ther