2.1 details of upgrade...

Similar Questions

• Equium A100: Need some details on upgrade opportunities

  Hey guys and girls
  I'll get to the point.

  I'm looking to upgrade the RAM in a Toshiba Satellite A100 laptop. He was provided with 1 GB (2 x 512 MB modules) providing I find the correct memory DDR 2 modules.
  Does anyone know if there is a limit to how much I can increase the RAM?

  I also want to replace the HARD drive module as the 80 GB just doesn't cut it, any advice or direction on that would be greatly received.

  Also, any information on an upgrade of the processor would be appreciated.

  I know it's asking a lot, but you guys know better than me.

  First of all I have to say, it will be interesting to know what Equium A100 you exactly (A100-xxx).
  Upgrading RAM is very easy and you can do it in first. According to specifications of the laptop, your laptop can handle with 4 GB max and compatible RAM modules is DDR2-533 1 GB (PA3411U-2M1G). To check the list of all compatible modules visit Toshiba support under http://uk.computers.toshiba-europe.com page

  On the upgrade of the HARD drive, there is no public document, but I'm sure that you can upgrade up to 250 GB HARD drive with no problems.

  Update CPU is not supported and you should think about it. Believe me with the maximum RAM that you need not upgrade CPU. Maximum RAM upgrade and optimize the operating system.

• Details of upgrade vCenter

  Hi guys,.

  If I need to upgrade my server vCenter for latest update. What is the location of the installer. Is there a guide or best practices somewhere on the Vmware site.

  Kind regards

  Van

  Hello

  Watch this.

  http://www.netguy.org/WordPress/?p=128

  Frank

• Tecra M5: Are there special precautions with the Bios upgrade?

  Are there special precautions he takes while uprading BIOS. I'm just afraid because both failover system report people after the upgrade, is it true?

  Hello

  Of course you need a few special steps if you want to update the BIOS!
  The update of the BIOS is risky! If you use the bad BIOS or bad BIOS update procedure, you may damage the motherboard or module ROM BIOS!
  This is why you should always read the details of upgrading the BIOS before you start the update.

  Finally and above all many people update the BIOS without any reason. That s is really stupid.
  In my opinion you should not update anything if you have no problems!
  Therefore, never change a running system ;)

  You know the technical knowledge of Toshiba?

  http://EU.computers.Toshiba-Europe.com-> download-> Knowledge Base & support

  You will find many useful documents and also the BIOS updated Details

• will have no upgrade to windows 8 for single e-mail keeps on return to outlook exprress I only use hotmail

  my pc keeps saying to upgrade to windows 8 when I try it will not be upgraded and I sigh in Hotmail and receive outlook express? can you help me with this you problem

  Hi Peter,.

  Thanks for posting your query in Microsoft Community.

  From your description, I understand that you can not upgrade the Windows 8 operating system. I'll be happy to help you.

  1. have you set up Hotmail account in Outlook Express?
  2. what browser do you use?

  See the following links. They have all the details to upgrade the Windows 8 operating system.

  
  

  Upgrade to Windows 8

  http://Windows.Microsoft.com/en-HK/Windows-8/upgrade-to-Windows-8

  A new start

  http://Windows.Microsoft.com/en-in/Windows/buy

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Upgrade in Windows 7 Home premium to Windows 7 Professional.

  OT: Windows 7 Professional upgrade.

  I have a laptop with Windows 7 family (64-bit) and I need to upgrade to Windows 7 Professional. Where can I get the media to do this?

  Hello

  Here the link click here to know more details on upgrades.

  1. Windows 7 by using Windows Anytime Upgrade click here

  2 the upgrade to Windows 7: frequently asked questions

  Get the best quote and play click here

  I hope this will help you

• Upgrade HP SIM

  We are running HP SIM 6.0 on a Windows 2003 Virtual server.  I need to upgrade to 6.1, and so on before moving on to 7.1?

  Hello

  Looks like you have to. Please read this:

  "NOTE: If your current version of HP Systems Insight Manager is prior to version 6.x, you must first upgrade 6.x or later before the upgrade to version 6.3 and above." For more information on the upgrade to version 6.x, see http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02051908/c02051908.pdf
  NOTE: All certificates of HP SIM are restored/preserved after the SIM upgrade process. The content of the certificate files do not change during the upgrade process, so to keep the old IP address and host name of the system details. Upgrade HP SIM does not have any content change certificate files. So previous IP/host-name will be retained. ».

  I hope this helps.

• ESX or ESXi host upgrade procedure...

  Respected VMware Experts,

  I'm three differrent customer support and upgrading ESX3.5 host ESX 4 Update 2 following is the scenario of the same thing.

  1) I have a Standalone ESX host 3.5, need to upgrade to ESX 4. Update 2.

  Local storage = 2 to (entirely used by 3 VMs)

  3 VMs

  What precautions should I take before upgrading ESX 3.5 to ESX 4 Update 2. What are the steps and details for upgrade ESX3.5 to ESX 4 Update 2, without losing any data (VMs). I do not have hard drives to back up virtual machines 3

  2) on the second site, I have a Standalone ESX host 3.5 requires upgrading to ESX 4 Update 2.

  SAN = 3 TB storage

  5 virtual machines

  What precautions should I take before upgrading ESX 3.5 to ESX 4 Update 2. What will be the prerequisite steps and details for upgrade ESX3.5 to ESX 4 Update 2, without losing the VMs data.

  3) third host ESX from Site 2 setting set in a cluster environment VMware 3.5 to ESX ESX 4 Update 2.

  SAN shared storage = 2 to

  7 VM

  What precautions should I take before upgrading ESX 3.5 to ESX 4 Update 2. What will be the prerequisite steps and details for upgrade ESX3.5 to ESX 4 Update 2, without losing the VMs data.

  Those who have done this several times and created a POS, will be very useful to read 100 pages PDF to do the same.

  Concerning

  MrVMware9423

  (1) check if your hardware supported vSphere 4.1

  (2) suggest upgrade to ESXi instead of ESX

  (3) make sure that you update your vCenter server first and vCetner 4.1 will run only x 64-bit Windows systems

  (4) for the stand-alone version you have separated RAID for ESX and store data if so you can just format the drive on which ESX is installed

  (5) for the site with SAN storage disconnect from host to storage and re - join

  Make sure that the upgrade guide is reviewed

• No upgrade path from RH 9 to 11 HR for Australian customers?

  • I want to improve my RoboHelp 9 to 11 of RoboHelp.
  • I'm an Australian, in Australia (although working for an American company).
  • The Adobe site, so show me a page ofsurround adobe with details of upgrade eligibility,
  • who says its possible for $599:
    http://www.Adobe.com/au/products/RoboHelp/upgrade.displayTab2.htm
  • But if I go to the page to buy the upgrade, the drop-down list "I own" gives only HR 10 option, not RH 9.
  • A phone conversation with someone from Adobe has confirmed that RH10 RH11 to is the route of upgrade only available to Australian customers!
  • If I was in the United States, I will be able to upgrade form RH 9.

  Has anyone found a way around this? I seem to have three options:

  1. Buy RoboHelp 11 at full price, as if I was a new customer and had not been used for a few years, or
  2. moving to the United States, or
  3. purchase of a competitive product?

  (I'm ignoring the option of pretending to be in the United States, because it wouldn't be fair)

  Thank you

  Nick

  I had discussions with Adobe again this morning. As a result, they changed their policy to upgrade today.

  They quickly contacted my dealer, giving them the Reference and the price. The dealer rep contacted me immediately, and I will buy from him.

  Adobe even changed the site immediately, so all Australian can now go online and upgrade of RH9 RH11.

  It has been a long and winding road, but the affected destination. (I don't complain on the AUD price on the site being 15% higher than the US $ price, based on the current exchange rate).

  Thank you, Pierre, if your ping, your Adobe contact has helped achieve this resolution.

• Satellite M70-337: how to pass my memory?

  Hi all

  I was hoping someone could help me, I have the satellite M70-337 and 512 MB ram.

  I want to improve this, but when I click options next to my laptop it says my model does not, it means that I'm not able to upgrade my memory?

  Thanks for any help.

  Check you user manual you should find details on upgrading memory

• HP ProBook 450 G2 P5S40ES #ABU: maximum Ram supported by Probook G2 450

  Please could you tell me the maximum ram supported by the HP Probook 450 G2 P5S40ES #ABU? I think buy it on Amazon, but it has only 4 GB. I would like to upgrade at a later date, but has no way to know which is the maximum. I tried to find out what was the motherboard, so I could figure it out myself, but it is not listed in the manual, section of drivers, review sites that I could find. Manual do no suggest details on upgrades as far as I could tell.

  @Rildrim

  Supports the following configurations

  16384 MB (8192 × 2, dual channel)

  12288 MB (8192 + 4096; dual channel)

  8192 MB (8192 × 1).

  8192 MB (4096 x 2; dual channel)

  6144 MB (4096 + 2048; dual channel)

  4096 MB (4096 × 1).

  2048 MB (2 048 × 1).

  Your Service Guide here.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=6943826&spf_p.tpst=psiContentResults&spf_p.prp_psiContentResults=wsrp-navigationalState%3Daction%253Dmanualslist%257Ccontentid%253DService-and-maintenance%257Clang%253Den&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Your videos to remove/replace here.

  http://h20464.www2.HP.com/results.htm?SID=6943826&MEID=BFEAE0A5-A6BD-4541-BA9F-32A9F9567EFA

  REO

• Can I change windows 7?

  Hi, my laptop runs Windows XP Professional, processor Intel (r) Pentium (r) M 1.86 GHz, RAM GB 0.99 can my laptop run Windows 7?

  If I changed to Windows 7, my laptop is running slow or I should change my first graphics card?
  If it is anything else, let me know. . Thank you
  Thanks for listening. .

  Hello

  To upgrade your Windows XP computer to Windows 7, you will need to select custom during installation of Windows 7. A custom installation keeps your programs, files or settings. It is sometimes called a 'clean' for this reason installation.

  See this link for details:

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  Performance of a computer always depends on the configuration example: processor, ram, hard drive.

  Please refer to:

  http://Windows.Microsoft.com/en-in/Windows7/products/features/performance-improvements

  It will be useful.

• acrobat_sl.exe - incorrect image

  Description of the problem: for some reason, a few days ago I was asked to "upgrade" from MS Word and restart the PC. I got the error dialog box saying "acrobat_sl.exe - bad Image", and this affects other software that I could not open like Acrobat and Quicken.  I was not able to correct the error and remove the dialog box through the upgrade window.

  Hello

  'upgrade' of MS Word and restart the PC

  give more details on 'upgrade' Word

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Windows 7 on G6 - 108 ca?

  Can I switch from Vista to Win7 on a G6 - 108ca, and if I can, should be 32-bit or 64-bit?

  Hello

  Please find the link given below might help you.

  Upgrade Windows Vista to Windows 7

   

  Details of upgrade Windows 7 for XP and Vista

• Impossible to reinstall & activate win, help please

  An Optiplex 790 supplied w/win7pro. virus messed up so badly he had to erase and start over. He didn't restore factory disk. Media is long gone. I have the key # on the side. I tried a dozen ways to rebuild blocks of MS and it me at every turn. I was able to download win7 from MS, but not with an OEM key. I tried a win8 Dell another disc, but do not have the key. Were responsible for win7 but not activate a detail win7pro upgrade dvd and I have the key with this but he doesn't like it. Tried the key from another Dell supplied with win7. win10 downloaded, but he does not like any key I. don't want to order and wait days for Dell to send a new drive. Someone get out me of this rat maze before MS I'm going crazy. Please, I beg you.

  Thank you.

  Did you give a shot to the phone's toll-free activation service, although its toll-free number in Finland. I reinstalled Win 7 on several second hand Dell machines, and most of the time the OEM license on par with the machine key failed automatic activation.