2.2.0.129 update stops at 43% in the update and says: error 46

Similar Questions

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• My commputer won't allow updates. When I try the blue bar just continues to run. I tried to run Powershell, but it stops and says error has occurred.

  Original title: Powershell

  My commputer won't allow updates.  When I try the blue bar just continues to run.  I tried to run Powershell, but it stops and says error has occurred.  What should I do

  Hello

  1 - what you mean that you can not install Windows Update? If Yes, then the updates?

  2 are. what Powershell you referring?

  3. you receive an error message? If so, then post back the exact error message.

  Answering these questions that could help us help you better. The following article could be useful if you are referring to the Windows updates.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Small color wheel keeps going in a lot of time and activity stops.  What is the problem and you have to?

  Chromatic wheel keeps going of and activity stops.  What is the problem and the solution?

  You meet the SBBOD (the spinning beachball of death).

  This means your MBP is trying to make his way through some task or tasks that he doesn't have sufficient resources to effectively or if you have a software problem that interferes with the efficient completion of the task (s). Common causes on this discussion:

  1. "antivirus" software from third-party manufacturers
  2. different types of cleaners 'misguided' and other dreck (for example, CleanMyMac, MacKeeper)
  3. trying to run too many processes for the hardware you have.
  4. Insufficient RAM for the processes that you try to run
  5. Hard drive that is too full
  6. CPU or hard drive that is too slow for the software you are trying to run.
  7. hard drive that is running out.

  Download and run Etrecheck http://www.etresoft.com/etrecheck and send the output to an answer here, and we can take a look and see what the problem is.

• Using W7 X 64 Ult I try to load KB976422 update and getting error 80070005. __

  Using W7 X 64 Ult I try to load the KB976422 update and get error 80070005.
  It dowloads OK, but when the machine charging the update fails and the system comes back and restarts.
  I understand that this update is for large flash cards, (which I did not), but it is still very irritating not to have a clean sheet on the history of the update and do not forget that it ever works.

  I looked in all the likely places, but can't seem to find this combination. I missed the answer somehow?

  DAve

  Dave

  80070005 is an access denied error. This error occurred never install any other updates? The update in question, KB976422, update drivers 4. Most likely, location of the drivers is 'protected' against driver changes or their registry setting is. Suggest that you manually download the update and save: Update for Windows 7 for x 64-based systems (KB976422)

  Configure the system to boot: How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7

  Try to install KB976422 now. If you are prompted to restart.  Who are you installed?

  MowGreen Services update - consumer safety

• not able to update, it says: error WindowsUpdate_8024402f please help

  not able to update, it says: error WindowsUpdate_8024402f please help

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80244016-8024402f-or-c80003fa>

  UTC/GMT is 17:37 on Sunday, May 13, 2012

• Cannot install updates custody saying error 0x8007007f.

  original title: cannot install updates custody saying error 0x8007007f. Why is this and how to fix this

  As my title says is that the problem can not install updates custody saying error 0x8007007f. Why is this and how to solve this problem and when I click on protector of windows it says cannot find program. How can I fix

  Hello

   
  1 are you facing this with any updates or specific updates?
  2 did you changes in the computer before this problem?
   
  Method 1: Run the patch from the link below, restart the computer and install updates.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Method 2: Install the updates of windows by disabling the antivirus and keep the computer in a clean boot.
  Step 1: disable the security software temporarily.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2: Perform a clean boot and install the application.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem
   
  Method 3
  Restore the system to a system restore point when the computer was working fine. Install the updates of windows by disabling the antivirus and keep the computer in a clean boot.
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   

  Perform a scan of the SFC to solve the problem of Windows Defender.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

• How to stop spooler under app to come and say he has stops working what is spooler subsystem app

  How to stop spooler under app to come and say he has stops working what is spooler subsystem app

  Hello

  1. Since when are you facing this problem?

  2. have you made changes on the computer recently?

  3. when exactly you get the error?

  I would suggest trying the following methods and check if it helps.

  Method 1: Solve printer problems:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2: Clear the print spooler:

  To do this, follow these steps.

  a. click on Start Menu, in the online search, type services.msc and press enter.

  b. in the Services listed stop the service print spooler.

  (c) in Windows Explorer, navigate to the folder below and open the PRINTERS.

  C:\Windows\system32\spool\PRINTERS

  d. click on continue and Yes (if prompted by UAC) to approve the opening of the PRINTERS folder.

  e. remove all files in the PRINTERS folder, until it is empty, and then close Windows Explorer.

  Note: DO NOT DELETE the PRINTERS folder itself. Don't delete its content.

  f. open Servicesand start the service print spooler.

  I hope that helps!         .

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  Suggestions?

  I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  What is the best solution?

  Thank you for your message.  I'm finally hung up with Adobe cat and after about 2 hours, the problem has been resolved.  Part of the problem was a corrupted Microsoft files.

  Ed

• I need to update and get error code80072EFE

  Please advice what to do like pc runs very slow and have to restart several times a day because of the above error

  Please advice what to do like pc runs very slow and have to restart several times a day because of the above error

  Hey josief

  Download update and scan with the free version of malwarebytes anti-malware in safe mode with networking

  http://www.Malwarebytes.org/MBAM.php

  You can also in safe mode with network download and run rkill to stop the problem before you download and scan with malwarebytes process

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that didn't he corrects not reposting in the windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Windows Update indicates that do nothing but updates, troubleshooting says error 0 x 80070057, tried several solutions but still not working

  I have an old HP 6730 b with Windows 7 Professional SP1 64 bit with Intel Core 2 Duo P8600 2.40 GHz which I had more than three years.  It was working fine until a week or so; now the CPU meter is constantly at least 50% and random spikes to 100%, freezing of the computer for a few seconds.  I had a similar problem with CPU spikes earlier but three weeks ago, I took apart and blasted the propeller with the compressed gas to empty the dust of the processor fan and which seems to solve the problem - no more spikes.  I haven't installed anything or changed settings - I just used this laptop for basic - internet, Excel, Outlook, Word functions.

  First, I scanned for malware with Malwarebytes - no infection found.  Then I checked the Windows Update and it said I had about 20 updates and 180MB of updates to install.  Tried to install, but after an hour and 20 minutes, it always says download updated, 0% complete.  Updates failed to install.  My last successful update a little over a month ago (11/03/16).  Sidenote - my update of Windows has always been set to "check for updates but let me choose whether to download or install".  However a year ago he stopped advising me when updates were available.

  I spent half a day in searching the Internet for solutions.  Among the things I've tried:

  • Microsoft FixIt 50123
  • Solving the problems of diagnosis of Windows Update
  • Windows6. 1-KB947821-v34 - x 64
  • Subinacl
  • Reset.cmd
  • WindowsUpdateAgent-7, 6 - x 64

  Even after doing all these things, when I run the troubleshooting Windows Update Diagnostic tool he always says "Windows Update error code 0 x 80070057 (2016-04-17-T-11_03_43A).»  The date given in this error (2016-04-17) which seems to correlate with when I stopped doing notified that updates are available.

  When I go to the Task Manager, the affected SVCHOST that takes 50% of my CPU does not initially - I have to click "Show processes from all users" in order to see the svchost process that is constantly take up 50% of my CPU.  When I right click the process and choose "Go to service (s)", these are services that are highlighted - they are all 320 in the PID column:

  • AeLookupSvc
  • AppInfo
  • Browser
  • EapHost
  • gpsvc
  • IKEEXT
  • iphlpsvc
  • LanmanServer
  • ShellHWDetection
  • SENSE
  • Annex
  • Themes
  • ProfSvc
  • Winmgmt
  • wuauserv

  I don't know what else to do.  All the tips are greatly appreciated.  Thanks in advance for your help.

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/fwlink/?LinkId=231149

  Please provide the exact details of any problem it reports as not fixed.

  Windows Update error codes
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/Windows-Update-error-codes/bd72b821-05bf-4EFD-BEA1-b0be08fffe54

• Uninstall software update Apple says error in seller contact package package unstaller

  Try to get itunes working to make a backup of my faulty iphone before repair.

  First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

  Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

  Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

  Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• My iphone 6 will not update of the iOS and says it can not be restored

  After crossing the steps, it says that it cannot update the phone and also cannot restore. Does anyone have an answer plase.

  Frenchterry wrote:

  After crossing the steps, it says that it cannot update the phone and also cannot restore. Does anyone have an answer plase.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• How to stop Auto-filling of the id and the password on the yahoo login page?

  Firefox asked me if I wanted my Yahoo login page automatically informed whenever I connect. I said 'yes' by mistake. Now, I know that I don't want. How can I stop it?

  To unremember a password, follow these steps:
  Go to tools > Options > Security > records passwords.
  And remove the site and passwords you don't want firefox to remember.