2.5.2019 - SSL certificate incompatibility AnyConnect

Similar Questions

• Cisco ASA 5505 and comodo SSL certificate

  Hey all,.

  I'm having a problem with setting up the piece of Certificate SSL of Cisco AnyConnect VPN. I bought the certificate and installed it via the ASDM under Configuration > VPN remote access > Certificate Management > identity certificates. I also placed the piece of 2 CA under the CA certificates. I have http redirect to https and under my browser, it is green.

  Once the AnyConnect client installs and automatically connect I get no error or anything. The minute I disconnect and try to reconnect again, I get the "VPN Server untrusted certificates! ' which is not true because the connection information to be https://vpn.mydomain.com and the SSL certificate is configured as vpn.mydomain.com.

  On that note, it lists the IP address instead of the vpn.mydomain.com as the unreliable piece of this. Now of course I don't have the IP as part of the SSL-cert, just the web address. On the side of the web, I have a record A Setup to go from vpn.mydomain.com to the IP address of the Cisco ASA.

  What I'm missing here? I can post config if anyone needs.

  (My Version of the Software ASA is 9.0 (2) and ASDM Version 7.1 (2))

  Yes that's correct. technically, it will take you to EKU as keys to authenticate server who was a little forced in version 3.1. But eventually, he was taken away. If you get no error using the browser and ot only comes with the anyconnect client. Most likely, you do not have to configured values. I can confirm that if you can share the fqdn with me also, you can try the upgrade and check it out.

  Thank you

  Bad Boy

• Firefox for Mac does not recognize a valid SSL certificate

  Firefox for Mac does not recognize the SSL certificate that is valid for this site, I got: https://www.georgeglazer.com. It gives a warning "not reliable." However, the Firefox for Windows does not give a warning. This happens even if I clear the cache and it happens in the Mavericks and OS of Yosemite. The certificate is up-to-date and with Comodo. Firefox for Mac is now the only browser producing these errors (v. 39, put updated) - Internet Explorer, Safari and Chrome are not. Our hosting provider has said it's probably a browser issue, perhaps having to do with intermediate certificates in Firefox being obsolete. I really hope you'll solve the problem, as it's annoying for us when we're going to do right by our customers and pay for the SSL certificate. I have attached a picture of the warning and the other from what you see on a PC: a pop-up that says it is a verified SSL certificate and gives details about the issuer, the period of validity, etc.

  COMODO should you sent a link to download the file 'bundle' containing the intermediate certificates. Who needs to go in the same directory as the certificate of your site. If you are using a control panel, your host can probably help with this process. And if you bought through them, shame on them for not taking care of this for you already!

• How to accept a new ssl certificate in Thunderbird?

  7.15.15
  I can't get or send emails on my cell phone two days ago.
  - Neither the "Configuration Options for certificates" worked to bring in the certificate that I use that allows you to send and receive e-mail. Under the "Digital Signature" or "Encryption" when I press "Select" to select a certificate, I get the pop-up message "Certificate Manager cannot locate a valid certificate... ». When I press 'View certificates' certificate that I use is listed under 'Servers' and the 'authorities' and is up to date.
  -In addition, under Tools - Options - Advanced - certificates for: "when a server requests my personal certificate", I selected "Ask Me every time" and left "query OSCP responder servers to confirm...". ', the box is checked.

  I think that this problem is bound to accept a new ssl certificate has been recently renewed. I've never had this problem before. How to start accepting a new certificate?

  Thank you.

  No you can not communicate with the server using a common product of Mozilla. In a short while you will not be able to co interact with it with any product. The operator/administrator of the server needs to fix their server to issue certificates 1024-bit or better. Or stop using TLS.

  The best explanation of this change and it's because I've seen is here https://weakdh.org/
  (right at the bottom of the page is what you need to do stuff)

  In essence, that the server does not have a security flaw serious patched and Mozilla products have been modified to not interact with servers that have not corrected the vulnerability. Vulnerability leaves you open to man in the middle attack on piracy.

• How can I set up email when the field on the SSL certificate does not match?

  I am a customer of Dreamhost and don't know if our situation is unique or not, but both smtp and imap are "mail.example.com" even if the SSL certificate belongs to ' *. DreamHost.com'.

  I was not able to set up the email on my flame app because I get the following error:

  > Could not establish a connection with "mail.example.com". There may be a problem with your network or server.

  I think the problem is the lag of domain name, but I can't find a way to accept the certificate.

  Hello!

  According to the official DreamHost wiki site , you can try this (cut-and-pasted from the page). If it doesn't work, there are still other options available on the page.

  To connect to the mail server using the name of the server dreamhost.com instead of messagerie.votre_domaine.fr.

  Use the following steps to determine the name of the server to use:

     In the DreamHost Control Panel
     Click "Account Status" in the upper right hand corner
     Look for the "Your Email Culster:" at the bottom of the list.
     Find your cluster in the table below.
     Use the server name for the incoming server in your mail program.
  

  Name of Server Cluster e-mail
  homiemail-sub3 sub3.mail.dreamhost.com
  homiemail-sub4 sub4.mail.dreamhost.com
  homiemail-sub5 sub5.mail.dreamhost.com
  homiemail-master homie.mail.dreamhost.com

• When you access Intranet sites that use SSL certificates issued by our internal PKI, FF for Windows gives an error of "incorrectly put in the form of message coded DER"

  When to access Intranet sites who have the SSL certificates issued by our internal PKI, FF for Windows gives an error message - an error occurred when connecting to myshaw. Security Library: improperly formatted DER encoded message. (Error code: sec_error_bad_der)

  Chrome and IE work fine. This is a PKI again using the signature SHA-2 algorithm.

  I was able to identify the problem. Our public key infrastructure has been using some signature algorithms that FF did not support.

• Thunderbird does not recognize a self-signed SSL certificate

  Dear support,

  I have a very strange problem that I don't understand.

  I run a server ISP offering IMAP and TLS/SSL HTTPS encryption. Both services use the same SSL certificate issued by RapidSSL/GeoTrust Server edward.ennabe.de

  When I open an https connection to the server, Firefox correctly solves the certificate chain and use the certification authority root Equifax (which is correct).
  However, when I try to connect to a mailbox via Thunderbird, all I get in the hierarchy of certificates is my server edward.ennabe.de. I don't think that it's "working as intended", or is it?

  Is something wrong with my Thunderbird or My Dovecot configuration? What is really strange that firefox recognizes it correctly.

  Thanks in advance

  Kind regards

  ZeroEnna

  In Thunderbird, click the 'Détails' tab in the display of the certificate.
  See all certificates of CA listed in the field "Certificate hierarchy" also installed in your Thunderbird certificate store?
  When checking this look for the tab 'authorities '.
  If there are no certificates listed in the missing chain in the Thunderbird certificate store (for some reason any), you can try to export it in Firefox and import them into Thunderbird.

• SSL certificate not used for Admin Server connections

  I have a GoDaddy SSL certificate installed on OS X Server 10.11.4. It works very well for the web server (https). Connection via Server.app off-site, produces a warning SSL and self-signed certificate. There is a related error regularly in newspapers:

  [[servermgr_certs]:-[CertsRequestHandler(KeychainOpenSSLExport) exportIdentity:]: SecKeychainItemExport (certificateChain) no certificate string available, defaulting to a cert leaves only

  Any suggestions? I reinstalled the cert...

  You must raise the.app of 3rd party certificate.  Follow these steps:

  1: Open Keychain Access.

  2: select the system Keychain in the keychains list.

  3: find the preference of identity com.apple.servermgrd and double click it.

  4: select your SSL certificate 3rd party in the contextual menu of preferred certificate.

  5: Press the button Save changes.  You will be asked to authenticate.

  6: restart the server or restart the process of servermgrd to activate the changes.

  Now when you connect to the server from a remote device using.app, sign in using your valid 3rd party SSL certificate and avoid mistakes.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• SSL certificates - sec_error_unknown_issuer

  Difficulty already in your browser. Get these SSL errors on all other sites starting to get really annoying! There is nothing wrong with SSL certificates or sites. It's your browser that is unable to verify certificates.

  http://i.imgur.com/52qSNXt.PNG

  Latest addition to sites that do not work: https://www.inspirepay.com

  The latest browser causing nothing but trouble for customers.

  Language edition. Please see the guidelines and rules of the Forum

  Quote: the browser should come with all certification authorities

  Note that Mozilla has a strong policy to decide that the CA registration certificates root.

  • http://www.Mozilla.org/en-us/about/governance/policies/security-group/certs/policy/
  • http://www.Mozilla.org/projects/security/certs/pending/

  The required intermediate certificates must be send by the server to make it possible to build a chain of certificates ending in a root certificate.

• The e-mail application does not connect to the Dreamhost servers. Perhaps because of how they configure their SSL certificate for their subdomains.

  http://wiki.DreamHost.com/Certificate_Domain_Mismatch_Error

  Certificate SSL of Dreamhost for their mail servers only at one level of subdomain while many of their clusters of e-mail exist on a second level subdomain. In my view, this translates into an error message 'bad security' of the e-mail application.

  I contacted DreamHost and they say they are unable to solve this problem, or that they will allow me to install an SSL certificate on my virtual domain pointing to my cluster e-mail (even if I had to buy a).

  I understand, it is possible to manually add certificates via adb in a way similar to this: http://www.pending.io/add-cacert-root-certificate-to-firefox-os/

  However what I read this: 1. does not work on the ZTE Open 2. Can only fix only navigation not the web mail client.

  Is there any option that is available to me short of switching hosts?

  Fabian,

  Are you familiar with Firefox OS? The reason why I say this is because the e-mail client cannot create an excaption certificate. In fact, it's design. It's design: https://wiki.mozilla.org/Gaia/Email/Features#Security

  This request for support to Mozilla was placed specifically for the product Firefox OS, for which there is only a single mail client.

  That said many people in the Mozilla Bugzilla, have been able to show me how to find another alias for those servers that actually works and in fact corresponds to SSL certificates. Although Dreamhost support could not provide me with any such information, and such information is not actually in the DreamHost wiki.

  I have a repeated insistence of Dreamhost possibility I should just live with the exceptions of SSL certificate, when there is real existing valid server names to match the certificates in question, silly.

  The fact that you post this solution for one product, so that it is not yet applicable beyond useless. It serves to muddy waters.

• How can I get Firefox re - check the websites ssl certificate? It gives me a message saying that my site's ssl certificate is expired at the time where it is not.

  My side ssl certificate has expired, but it was renewed a few days later. For more than a month it was renewed, but I still have Firefox users, the error of statement.

  This connection is Untrusted
  Technical details:
  Eng.fanpageengine.com uses an invalid security certificate.
  The certificate expired on 31/01/2013 15:59.

  This is a link to a 3rd party site that verifies that the ssl certificate is current.
  http://www.Networking4all.com/en/support/tools/site+check/report/?FQDN=HTTPS%3A%2f%2Feng.fanpageengine.com & Protocol = https

  I need the steps they will need to do Firefix update of its registration.

  Additional information.
  This isn't the effect everyone visiting my website using Firefox. It does seem that effect people who visited the site, although the ssl certificate has expired. However the clearing the cache and cookies have no effect.

  Thanks for the help.

  Thanks for all the help. I found a solution. =)

  https://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

• All the sites SSL Web I visit displays the message "this connection is untrusted" and shows me a false SSL certificate for a different domain name.

  When I visit a Web site that requires SSL I displays the message "this connection is untrusted". Any Web site that I visit, it's always exactly the same message and the same SSL certificate that she is no longer valid for www.thawte.com

  support.Mozilla.org uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.
  The certificate is valid for www.thawte.com
  The certificate expired on 11/11/2011 23:59. The time now is 11:46 28/01/2012.

  When I click "Add the Exception" on a Web site and view the certificate, it is exactly the same certificate with the exact same serial number.

  I had a similar problem with Internet Explorer showing a 404 error when I visited SSL protected pages but to do a restore of the system a month ago to correct this. All other bowsers are / were very good.

  I installed Firefox 3.x month last to test something that is when the problem started. I have since uninstalled Firefox 3.x and reinstalled the latest version. I deleted all the preferences/settings, disabled modules and reinstalled many times. I did a Windows system restore to before that the problem started with no luck.

  The time / Date on my computer are correct. I have no firewall other than the windows one. I had no antivirus (netbook) until I installed a (Avast) yesterday to see if a virus was causing issues (found nothing). This problem arises on any internet connection (tested to work and home).

  Try bypassing the caveat

  or try to use the module Skip Cert error (to jump to the SSL/TLS certificate error page)

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Impossible to update SSL certificate for Mail account

  My SSl certificate has expired. I bought a new one installed and all other mail client works fine... except this junk called Mac Mail. Now, I can't check my email at all.

  I have 14 accounts on the same server. One account was asked to accept the new certificate (hostname mismatch). All other accounts are now with one! and "taking into accounts online" does nothing. Remove the SSL account does nothing. Remove the old certificate to keychain does nothing.

  It is a valid, rather than a self-signed certificate.

  So while I'm reconfigure everything on a real email client, anyone happen to know how to solve this problem? Every solution proposed elsewhere (other discussions, forums) do not work. Short to delete all accounts and recreate them will work hoping, this seems to be a lost cause...

  Apple, why do they hate you us so much?

  Fixed by wiping the mailbox completely...

• Impossible to get websites to use respective SSL certificates

  Mac OS 10.10.5

  Server 5.0.15

  I have a question where the default web site ("Server (SSL) Web site" ") is in conflict with the SSL certificates for my three other SSL sites.

  The configuration of my website (Note: server IP is 192.168.1.100)

  • Web Server SSL (all IP addresses) site - cert for domain1.com (work)
  • Domain1.com (192.168.1.10) SSL - cert for domain1.com (work)
  • Domain2.com (192.168.1.20) SSL - cert for domain2.com (cert draws for domain1.com, invalid identity)
  • Domain3.com (192.168.1.30) SSL - cert to domain3.com (cert draws for domain1.com, invalid identity)

  My DNS records:

  • Primary area - Domain1.com
    • A: Domain1.com 192.168.1.10
    • NS: Domain1.com
  • Primary area - Domain2.com
    • A: Domain2.com 192.168.1.20
    • NS: Domain2.com
  • Primary area - Domain3.com
    • A: Domain3.com 192.168.1.30
    • NS: Domain3.com
  • Reverse zone - 1.168.192
    • PTR: 192.168.1.10 Domain1.com
    • PTR: 192.168.1.20 Domain2.com
    • PTR: 192.168.1.30 Domain3.com
    • NS: Domain1.com
    • NS: Domain2.com
    • NS: Domain3.com
  • Reverse zone - 100.1.168.192.in - addr.arpa
    • PTR: 192.168.1.100 server.domain1.com
    • NS: server.domain1.com

  Whatever the cert is selected for the default Web site apply to all SSL Web sites. The only way I can force everyone to use their respective certificates is to set the IP address of the Web site to be the same as the IP of the server (in this example 192.168.1.100). It works, but which prevents the work Profile Manager.

  I'm 99% sure that I have my DNS configured correctly (right now all a records point to 192.168.1.100 as a temporary solution), but I'm willing to take another look, if someone has a suggestion clearly and concisely. Ideally, each DomainX.com would have an IP de.10.20 et.30.

  So how can I do all three Web sites use different IP addresses AND their respective certificates? Is this possible?

  (I appreciate any suggestion at this stage. This question is impossible to find an answer anywhere on the internet after about 9 months of research).

  Solution for someone who comes looking for this problem!

  After talking to the Apple Enterprise support:

  The site services will assuming that you only have one certificate for all Web sites. Unless you want to really roll up your sleeves and get down and dirty with the Apache configuration files, you must have a valid certificate for all areas, you use AND give each site its own IP address.

  When configure you your certificate, the host name must look like this:

  Server.Domain1.com (this is the name of your common)

  *. Domain1.com

  *. Domain2.com, etc..

  I used a StartCom certificate class 2 IV SSL ($ 59 / year).

  Then, assuming you know how to import a verified certificate, use it for all services that need and all the websites you want course (why wouldn't you use https, anyway?)

• How to clear all SSL certificate exceptions?

  I want to erase all certificate exceptions, in other words, to return to the original set of SSL certificates secure by default. I found the Manager certificates and its large lists of things trust, but I don't know which of them bundled with Firefox and which of them were added by me at some point in the past. How can I do this?

  Rename or remove the file cert8.db in the profile folder to delete all intermediate certificates that Firefox has stored by visiting secure Web sites.

  Certificates roots of build-in will display as "Builtin symbolic object" and intermediate certificates stored as 'software security device.

  Rename or remove the cert_override.txt (cert_override.txt.old) file in the Firefox profile folder to remove any permanent exceptions that you have saved.