Impossible to update SSL certificate for Mail account

Similar Questions

• SSL certificate for access to the administration of a WSA

  Can someone point me to a guide on how to install an ssl certificate for access to the administration of a WSA?

  Curiously, all the documents that I could find so far talk of SSL certificate for HTTPS decryption...

  Page 367 of this doc.  http://www.Cisco.com/c/dam/en/us/TD/docs/security/WSA/wsa8-0/wsa8-0-6/WSA_8-0-6_User_Guide.PDF

• Setting the SSL certificate for the web user interface

  How can I configure the SSL certificate for the management of a SG300 interface? I don't seem to find the configuration option in the web gui?

  Hello Dirk,.

  For import / create / modify h99350 ssl please go to ' ' security > SSL server > SSL server authentication settings.

  HTTPS is enabled by default.

  Thank you and best regards,

  Siva

• The e-mail application does not connect to the Dreamhost servers. Perhaps because of how they configure their SSL certificate for their subdomains.

  http://wiki.DreamHost.com/Certificate_Domain_Mismatch_Error

  Certificate SSL of Dreamhost for their mail servers only at one level of subdomain while many of their clusters of e-mail exist on a second level subdomain. In my view, this translates into an error message 'bad security' of the e-mail application.

  I contacted DreamHost and they say they are unable to solve this problem, or that they will allow me to install an SSL certificate on my virtual domain pointing to my cluster e-mail (even if I had to buy a).

  I understand, it is possible to manually add certificates via adb in a way similar to this: http://www.pending.io/add-cacert-root-certificate-to-firefox-os/

  However what I read this: 1. does not work on the ZTE Open 2. Can only fix only navigation not the web mail client.

  Is there any option that is available to me short of switching hosts?

  Fabian,

  Are you familiar with Firefox OS? The reason why I say this is because the e-mail client cannot create an excaption certificate. In fact, it's design. It's design: https://wiki.mozilla.org/Gaia/Email/Features#Security

  This request for support to Mozilla was placed specifically for the product Firefox OS, for which there is only a single mail client.

  That said many people in the Mozilla Bugzilla, have been able to show me how to find another alias for those servers that actually works and in fact corresponds to SSL certificates. Although Dreamhost support could not provide me with any such information, and such information is not actually in the DreamHost wiki.

  I have a repeated insistence of Dreamhost possibility I should just live with the exceptions of SSL certificate, when there is real existing valid server names to match the certificates in question, silly.

  The fact that you post this solution for one product, so that it is not yet applicable beyond useless. It serves to muddy waters.

• Impossible to update Google password for Mac Mail (no password field)

  I needed to update my gmail password so now Mac Mail is not my gmail.  I have looked everywhere a place for the user name and password in the e-mail accounts or system preferences and can't find it.  the common solution people give is:

  "Click the Mail menu and select the preferences option. Select your account and update your password in the password field. Click on icon close this window, and then click Save. »

  Under the Mail menu > Preferences, select the account, click the sign [---] at the bottom of the list of accounts, and then add the account.

• El Capitan gives error update disables iCloud e-mail account on MBPro

  I tried to solve this problem based on other similar questions welcomed by others, but have been unable to fix it. I have a single e-mail account which is apple me.com. The account has stopped working on the upgrade and does not download the messages for the MBPro. I tried everything that I've seen other recommended with similar but not identical questions be advised to do so and it did not work. My Rebuild option on the drop-message is disabled! I tried to disable an option 'automatically detect and manage account settings' again and again without success. I explore my computer I see other glitches too which make me wonder if it was the best idea to upgrade. I have implicit confidence in Apple which is questioned as we speak. Can it be fixed and if not can I go back to the older operating system? At least I can get my email on the ipad, but is not a solution! Thank you!

  Because I'm not allowed to edit my post, I can only answer for myself with an update:

  (PS) I just created that I can send messages but cannot receive them.

• Help generate the SSL certificate for the Security Server

  Hi people,

  We have server (ss - 01.mydomain.local) security and connection server (cs - 01.mydomain.local). Now intend to install a certificate on the Security server. What should be the common name.

  our Web site is something like access.mydomain.local.

  Also, we plan to install SSL only on security for internet access server, this will affect the internal users, access to the connection to the server.

  Thanks and greetings

  J P Raj

  Take a look at the link below

  https://pubs.VMware.com/horizon-view-60/topic/com.VMware.ICbase/PDF/horizon-view-60-scenarios-SSL-certificates.PDF

  Internal users will not be affected when you install the Security server certificates

  Simply create a CSr file > get certificates and import them to the Security server in the MMC guide explains practically everything. If you already have certificates wildcard certificates, then you can follow the sub process

  (a) export the server certificates

  (1) to connect to the server that has certificates

  (2) for this server to export it to a PFX format certificate.

  (3) open the Microsoft MMC Certificates snap-in for the computer account.

  4) navigate to certificates (Local computer) > personal > certificates.

  (5) right-click on the signed certificate that is to be exported.

  6) click all tasks > export.

  (7) on the Welcome screen, click Next.

  8) click Yes, export the private key.

  (9) if it is an option, click on include all certificates in the certification path.

  (10) enter a password for the private key. This is required for the import certificates.

  (11) to enter a file name and location. For example, C:\certificates\certificate.pfx.

  12) click Next.

  13) click Finish.

  b) import it to the use of broker or planned connection securityr.

  Certificates of thye 1) import (preferable Pfx format) for the server broker or planned connection security.

  (2) open the Microsoft MMC Certificates snap-in for the computer account.

  3) navigate to certificates (Local computer) > personal > certificates.

  (4) right-click the certificates.

  5) click on Import.

  (6) through the pfx and click Next.

  (7) enter the certificate password.

  (8) select Mark keys as being exportable.

  9) click Next.

  10) click Finish.

  (c) restart Consulting Services

  To restart the services:

  Log in as an administrator on the server that is running the Server VMware View connection server VMware View connection or VMware View Server Security.

  Click Start > run, type services.msc and press ENTER.

  In the list of services, right-click on the VMware View connection Server or VMware View Server Security service.

  Click on restart and wait for service to stop and start.

• SSL certificate for the Security Server external facing

  Dear all,

  Today, I bought an external SSL certificate of DigitCert for our security server. I imported the certificates in the personal certificate (computer account) on the Security Server store. DigiCert provided three certificates, root CA, CA server and the other with the name of our domain. I renamed the vdm to the friendly name of the existing self-signed certificate and used the friendly name for the certificate vdm has our domain name. Subsequently, I rebooted consulting on the Security server. They are all released on except the "Display Blast Secure Gateway" service which entered the suspended state.

  On our facility, we have a connection to the server and a security server. To the Security Server, we use a different domain name for connecting to the server. We have an internal PKI and the connection to the server uses an SSL certificate.

  connection to the server = server01.internaldomain.com

  Security Server = server02.externaldomain.com

  Why the certificate cannot be loaded to view Blast Secure Gateway? I missed something?

  Thank you

  Edy

  I solved it. It was with the private key of the certificate. This is the reason that the Blast Secure Gateway could not load.

• All the sites SSL Web I visit displays the message "this connection is untrusted" and shows me a false SSL certificate for a different domain name.

  When I visit a Web site that requires SSL I displays the message "this connection is untrusted". Any Web site that I visit, it's always exactly the same message and the same SSL certificate that she is no longer valid for www.thawte.com

  support.Mozilla.org uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.
  The certificate is valid for www.thawte.com
  The certificate expired on 11/11/2011 23:59. The time now is 11:46 28/01/2012.

  When I click "Add the Exception" on a Web site and view the certificate, it is exactly the same certificate with the exact same serial number.

  I had a similar problem with Internet Explorer showing a 404 error when I visited SSL protected pages but to do a restore of the system a month ago to correct this. All other bowsers are / were very good.

  I installed Firefox 3.x month last to test something that is when the problem started. I have since uninstalled Firefox 3.x and reinstalled the latest version. I deleted all the preferences/settings, disabled modules and reinstalled many times. I did a Windows system restore to before that the problem started with no luck.

  The time / Date on my computer are correct. I have no firewall other than the windows one. I had no antivirus (netbook) until I installed a (Avast) yesterday to see if a virus was causing issues (found nothing). This problem arises on any internet connection (tested to work and home).

  Try bypassing the caveat

  or try to use the module Skip Cert error (to jump to the SSL/TLS certificate error page)

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• Install a new SSL certificate for Server 2008 R2

  Hello

  We have a Windows 2008 R2 server running of the machine. As a company that manages payments, we need to be registered PCI DSS and the scan picked up a point of failure is that we do not have an SSL certificate installed. I bought a via GoDaddy and followed the instructions on their site to install it, but the PCI DSS Analysis is always a failure for the following reason: -.

  "The following certificate was at the top of the certificate chain sent by the remote host, but is signed by an unknown certification authority."

  The certificate at the top of the string is the default "integrated". How to promote the certificate GoDaddy installed at the top of the chain?

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• SSL certificates for a clustered environment

  Hi all
  I have a fairly large area in an environment with an Admin Server and 6 managed servers.
  Managed servers are distributed on two physical machines with the first machine, thus holding the administration server.
  Each pair of servers is joined in a cluster, so I have 3 groups, each with a single application.
  
  Now some of the communication must be done rained ssl and I wonder about the configuration. First of all, I should
  Note that these certificates will be not visible to a client (browser), they will only be used for the communication of internal demand.
  
  So, do I need a certificate for each managed to identity of key server? Or what can I use the same certificate for each of them?
  They will all be available under the url, under a few layers of routers. If I use the same certificate that I can use the on the
  router, the customers see as well? What I can or I should?

  You only need to tell nodemanager where to find its certificates. If you have already chosen SSL for your nodemanager, by default it then uses the democerts that come with WL. But you really want to use these...

  So in your nodemanager properties, use something like:

  #
  # SSL configuration
  #
  Keystore = CustomIdentityAndJavaStandardTrust
  CustomIdentityAlias = your_cert_alias
  CustomIdentityKeyStoreFileName = full_path_to_your_identity_keystore_used_by_your_mgd_server
  CustomIdentityKeyStorePassPhrase = your_storepass
  CustomIdentityKeyStoreType = jks
  CustomIdentityPrivateKeyPassPhrase = your_keypass

  This indicates your nodemanager use the same identity that your servers managed. Since it is using java standard trust, it shares the same "cacerts" as the application server. In the console, your Machine-> Configuration-> Node Manager-> Type would be SSL.

  So, it would be all that is necessary for the nodemanager.

  In your trusted keys file, you can simply add the signatory / cert ca root for your certificates or you can add individual server certificates if you want to restrict the confidence a little more away. Normally certificates of identity will expire more frequently than the root certificates, so I do not identity certificates in the trust store since that simply means more maintenance when they expire.

• Impossible to update my system for Windows 8.1 of the store and he asked administrator account.

  Original title: windows store question

  Windows store does not update windows 8.1.  He asked for the administrator account.  I am the only user and my account says I'm the administrator.  The computer is synchronized and location has been changed.  How can I fix it?

  Hello Beverly,.

  Welcome to Microsoft Community forum.

  If you can not upgrade to Windows 8.1, I suggest trying the steps by Vivian Samartha responded on April 12, 2014 in the following thread and see if it works for you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-windows_install/kb2919355-Windows-81-update-fails-800f0092-and/4d4d23a3-695a-4bd4-B340-d2ce9c75919d

  If the problem persists after trying the above steps, I'll ask to follow the steps given by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

  Kind regards

• HPDM: HPDM replace self signed SSL certificates for server HDPM and master repository

  I am trying to replace the automatically generated self-signed certificates (issued to DM) issued by DM server HDPM and master repository.  I'm NOT arbitration FTPS, HTTPS embedded HPDM or CERT Thin Client Agent server.

  I already have CERT for the installation of our own internal domain CA for FTPS in IIS and the built-in Apache HTTPS server.  These work properly and pass tests of repository for both protocols.  I also have questions for Thin Clients of our internal CA very well.

  I am interested in the HPDM real server cert and cert master repository. These are generated automatically when the two services start.  They use a very weak MD5 hash and key RSA 1024.  I can't find any documentation around that, with the exception of troubleshooting, in which you can remove these certificates restart services and they will be regenerated.

  Here are the paths certs\key
  HPDM % install Path%\MasterRepositoryController\Controller.crt (Cert repository)

  HPDM % install Path%\MasterRepositoryController\Controller.key (repository key)

  HPDM % install Path%\MasterRepositoryController\Client.crt (HPDM Server Cert)

  HPDM % install Path%\Server\Bin\hpdmskey.keystore (Both HPDM server and repository Certs and keys) (not sure what format it is in.  It is not PEM and P12 ok I can say)

  There are also some HPDM % install Path%\Server\bin\hpdmcert.key.  Don't know what it is.  It's the key to the server HPDM but deleting it does nothing and it is never re auto generated in one of my tests.

  I am able to replace the Controller.crt and keys with my own files CA internal those emitted very well.  The service started and no errors occur.  However if I replace the Client.cert (HPDM Server Cert) with my own service will start but there are Socket SSL errors in repository logs and the HPDM server could not connect to the master repository. I have no idea where the key file is supposed to be for HPDM Server Cert.

  Can anyone help with this?  I can't find the configuration files for the service to generate their own certificates.  If I did I would try at least to change the config to do not use MD5.

  Hello

  These certiricates between HPDM server and MRC are not designed for customizable. Please submite one scenario if you have concerns of security on it.

  Just for info:

  hpdmcert. Key is for communication between the server HPDM and gateway HPDM

  hpdmskey.keystore is for communication between the server HPDM and MRC

  server_keystore is for the commhucation between HPDM server and the Console HPDM

• Impossible to update AND add new users accounts

  Heres so how the story goes

  1. because of certain circumstances or rather a big mistake I selected all contents of C: drive then -> right click-> share with-> Stop-> Stop sharing again in the dialog box

  and then the process went on for a very long tym, then connecting to one another use account could not access to what in the C drive any software or

  2. to curb that I deleted that account creates a new one, but which did not open always gave me an error

  "User profile Service service failed the sign-in user profile cannot be loaded."

  3. now to heal this thing that I chose to go to the auto repair section that u get up during the boot. But the repair failed, and after that it's the absolutely wrong thing

  4 widows does not start he says the "cabin for your PC configuration data are missing or caontains errors."

  File: \EFI\Microsoft\Boot\BCD

  Error code: 0xc000000f

  5. now for this I went to recovery d guest and used these commands (by following this procedure http://superuser.com/a/504360

  Bootrec /fixboot

  BCDboot c:\Windows/l en-gb/s-b:/f AL

  6 and after windows finally started, but he asked to the windows registry, but I already had it registered, so after logging in to my hotmail account, I got back and there was no loss of data

  7. but now again I could not create user accounts so I chose to do a REFRESS system and restore it to factory settings, but when I went in the update and the setting of recovery for updating the system won't let me refresh it by saying

  COULD NOT FIND THE RECOVERY ENVIRONMENT.

  Insert the windows installation recovery media :'(

  but the last time he didn't something like this AND I STILL HAVE MY RECOVERY DRIVE INTACT AND INTACTE.

  8. one thing while looking into the boot devices in the trunk until then, I see 2 start windows names but both initialize the same thing.

  9. Please fix this :'(

  HP laptop: F2C09PA #ACJ

  HP Pavilion 15 n012-tx

  Windows 8.1

  Always to the warantty

  Bought last November

  Hey OPNZ,

  /blushes

  Thank you!

  You must order the DVD of recovery by phone. I'm sure that that are not covered by the warranty, as after the initial installation of the laptop you should have been prompted to create the DVD and are not included in the cost of the laptop.

  Give HP a telephone support call, they will have an exact answer for you. I am sure that these DVDs are only about $15 - $ 25. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

  Enjoy!

• Impossible to update security details of my account

  Original title: security details

  I am asked to change my password. Then I logged my account in microsoft.com. It seems that I can not update my phone (my previous laptop number has been lost) in the details of the account and he told me that I would receive a code for verification. What should I do so that I can receive my new number verification code

  Thank you! :)

  I suggest you take a look at:

  http://Windows.Microsoft.com/en-us/Windows-Live/account-reset-password-forgot-FAQ

  If the problem persists, contact Windows Live support.