2 days ago, I started having problems with certain websites that worked fine before. They work again very well on other browsers. What happened and you can fix it?

Similar Questions

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) bu

  I've updated to 2015.2 in September and started having problems with freezing while working on the photos. I upgraded my memory from 4 GB to 8 GB and it has disappeared (in most cases); However, I always feel a lot of questions of export of JPEGs (gel) but not tif files? Very frustrating. Tried to install the new updates but my creative cloud is just a blank page?

  Hello

  I think you are referring to the white empty window of CC desktop application.

  Please refer to the threads below where this issue has been addressed:

  Creative cloud is empty window why?

  Cloud Desktop App is empty?

  New application Cloud Creative unusable: it is empty!

  Re: Empty opening creative cloud app

  Kind regards

  Sheena

• I can't rename my files photo and document from one month. What happened and how can I solve this problem?

  I can't rename my files photo and document from one month. What happened and how can I solve this problem?

  Hi robertjefferies,

  You get the error message?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Diagnose and repair Windows files and folders problems automatically

  Method 2: Start the computer in safe mode, and then check. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select Mode safe

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Let me know if the problem persists in this mode

• Two days ago, I started having error 213:11.

  This error indicates there is a problem with the license of my product (Acrobat 11, purchased and installed two years ago).  I tried to re-boot several times without success, and I have uninstalled and reinstalled nothing doesn't.

  Install the error of the newspaper: "license store does not allow writing | Adobe Creative Suite 5.5, Adobe Creative Suite 5

• Anyone having problems with effects after that put 5.0.3 update?

  Since the 5.0.3 update a few weeks ago, I had problems with adding an effect to a clip. It seems not to matter type (both are res HD, either a shot on a Canon 5 d Mark II or a .m2t file .mov from a camera of HD Sony HVR - Z5U with a registration unit of memory). I have been using the file types of the same cameras with CS5 since August without any rendering problem, by adding effects, playback, slow response time, etc. Now, it seems doubtful that PrPro can handle adding an effect to a clip.

  Before it would show changes to the effect on the video in real time, but now it takes several minutes for the small front wheel I can access PrPro again. By example, if I add a fast color corrector or levels and try to change only one attribute, it unfolds, crashes, and then finally updates. He plants not (unless I force quit), it just hangs. I tried with just Finder and open PrPRo, and it still occurs. Previously, I could launch Photoshop, Firefox, Chrome, Mail, Finder, * AND * Pro

  Nothing else is it slow (playing back non-rendus, while that rendered or book review), although any reading can be slow sometimes with effect. In addition, there doesn't seem to be picky to a certain video effect. I've done everything I can think of, returning Short or reinstall: log in as root, Pref delete, drives hard various small clips. Initially, working on a FW800 external drive, I have recently worked on internally to test clips, but apparently not to the disc material.

  The fact that everything worked fine before, I can't that assume it was the update. I have the same software on a similar but lesser model home with no problem, but the 5.0.3 update failed with the auto-update and I have not tried to install it manually, is still on 5.0.2.

  Anyone else having this trouble and short of reinstalling, you found a solution? Thank you.

  iMac 27 "(21" model of Home Basic) "

  Mac OS X

  10.6.5

  2.8 GHz Intel Core i7 (4 cores)

  8 GB RAM

  ATI Radeon HD 4850 512 MB

  Master Collection CS5

  > Is there documentation available online on how to revert to the previous version?

  Uninstall Premiere Pro. Then, reinstall without updates.

• Problem with a program that works just before...

  Hello

  (I'm a beginner!)

  I have a program of control 2 motors and collect the speed of each axis and the load between them.

  

  The equipment is working well (checked all sensors) and the program worked fine until 5 days...

  Now my problem is: I want to see the load in real time (using a digital indicator DBL linked to a DAQ Assistant coming to collect the data to load)

  AND in the DAQ Assistant (double-click on it) to see the real-time load when I use the button "START/STOP".

  

  but on the front panel, when I click on the button "RUN" indicator is just fix on the first value and does not have anything...

  

  I checked the connector between my DAQ and my IND N. and I changed the IND. N. and tried to update channels in my DAQ to see if the problem but nothing is fixed now... after 3 days on this problem

  Thanks if you can help me...

  A number of things.  I want to change the configuration of your data acquisition for the strength to be "1 sample (on request)", because it seems that you are just reading a sample whenever you pass through the loop.  I think that your other facilities DAQ need this also.

  I assume you use the speed of loop to control the sampling frequency of your acquisition of other data channels.

  Is all of your Outlander acquisition card or separate cards?  Some cards do not allow tasks or simultaneous acquisition.  I guess the DAQ assistant takes care of this.

  You can also take a look at the measure continues and model logging.  It may be well suited for what you're trying to work on.

• I can barely type a sentence in email or office without the cursor jumps around. It gets worse every day! ... What happens and how can I fix it or stop?

  I can't type a paper letter or in school without the cursor jumps around. It just happened again! ... He jumps around and I have to watch very closely... he already did 3 x now, just try to type these 3 phrases! What is wrong w / my laptop? and how can I solve this problem!

  Just a guess, you could have a setting on a place where some keys move the mouse. That would be used in the case that you do not have a mouse.

  Other that I can't help you much. If you are using a desktop computer, try to unplug the mouse and see what happens. If you're on a laptop, it could be that the trackpad is having problems.

• A few weeks ago, I started having problems to make the links and buttons to work on various Web sites. I tried the steps help without success. What gives?

  When I go to some web sites, I can't some of their links or buttons to work. For example, I can't "vote" and see the results on the MSN home page or go to my account on the homepage of Ancestry.com. Some links work, but others do not. They do not work in Internet Explorer either. I tried all suggestions for plug-ins and extensions that gives Support of Mozilla. I have run Windows 8.1, have Java as well as JavaScript. I tried to understand what is happening. Any help would be appreciated!

  Ronmissy2008, it's immediate. I'm sorry to hear about you, not being able to access some links, or use the buttons to vote on issues or read articles. " First, I call your Internet service provider and have them check your router '. There is a possibility that it may need an update of the firmware, because you have upgraded to Windows 8.1. Firmware is integrated software that implements network protocols and security for this specific model of hardware device. More Wi-wired routers and are designed to perform a firmware upgrade process. The manufacturer will be able to make improvements to your router. When I arrived AT & T U-verse, my router updated its firmware that took a few minutes to perform. Click on the link for more information on firmware updates:

  (http://compnetworking.about.com/od/wifihomenetworking/qt/firmwareupgrade.htm)

  If your service provider is done with the update of the firmware on the router, then try to update your Windows 8.1 software.

  1.) Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on settings, tapping or clicking on PC, change settings and then typing or clicking on update and recovery.

  TAP 2.) or click on choose how to install the updates.

  3.) under important updates, choose the option you want.

  4.) under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click on apply.

  (http://windows.microsoft.com/en-us/windows-8/windows-update-faq)

  That's all I could think of at this moment. No doubt call your Internet service provider and let them know you have upgraded to Windows 8.1 and your router needs to be checked. In addition, ask them to update the firmware, if necessary. Then run Windows update. I'll do more research on this issue. Let me know what results you receive after completing the firmware update and windows update.

• I started having problems with windows 7 is not genuine not. I had to replace the hard drive on my laptop, but to restore a snapshot of the old failing hard drive. .

  I used the download from a previous post just to check if my copy was indeed enabled.  The results are listed below.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - 4F8HK - M4P73-W8DQG
  The Windows Product Key hash: Xs1iQgVeo0C + sObJxS7eu + FuBPQ =
  Windows product ID: 00359-OEM-8992687-00057
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {BED6955A-ADD1-4BFF-A73B-532792207817} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.120830 - 0333
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Home and Student 2007-100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Kurt A. Brown\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppobjs.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppc.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppwinob.dll[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\slui.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\sppcomapi.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\sppsvc.exe[6.1.7601.17514], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\windows\system32\systemcpl.dll[6.1.7601.17514], Hr = 0x800b0100
  [File mismatch: C:\windows\system32\user32.dll[6.1.7601.17514], Hr = 0x800b0100

  Other data-->
  Office details: {BED6955A-ADD1-4BFF-A73B-532792207817}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-W8DQG00359-OEM-8992687-000572S-1-5-21-2348594013-2988628447-135780450TOSHIBASatellite A505INSYDE1.8020100525000000.000000 + 0004A043107018400F804090409Time(GMT-05:00) Standard is03TOSINVTOSINV00100100Microsoft Office home and Student 200712276F0FD63640740Xx 2U7ZH1mcLzPu8B2xK8IJuhjc plus 81602-928-9574262-683871

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800057-02-1033-7600.0000-2452009
  Installation ID: 010371792021686926736144356935893366062274769915236573
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: W8DQG
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 20/01/2013-08:02:32

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 1:19:2013 14:29
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID hash: NgAAAAEABAABAAIAAAACAAAAAgABAAEA6GEqifoynmKOaDAGBDPys6T62iQostRfhFC4jkbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC TOSINV TOSINV00
  FACP TOSINV TOSINV00
  HPET TOSINV TOSINV00
  START TOSINV TOSINV00
  MCFG TOSINV TOSINV00
  ASF!   TOSINV TOSINV00
  SLIC TOSINV TOSINV00
  SSDT PmRef CpuPm

  now, your report looks normal. you're good to go.

• [JS] IDCS3 - starting having problems with dataMerge

  I'm a designer trying to familiarize themselves with writing a script for data fusion, but fight with placeholders for data fusion, and how they relate to the text fields. I looked around for tutorials, etc. concerning data script fusion function but have not been able to find a lot of information. I would be grateful if someone could tell where I'm wrong. The script returns an error "Invalid object" on the highlighted line.

  Here is the section of the script for text fields. I'm sorry for its inelegance; I'm very much in the early stages of learning both JavaScript and InDesign scripting. Thank you very much.

  Insert the input text block
  var myEntry = myDocument.pages.item (0).textFrames.add ();
  myEntry.label = "input";
  with (myEntry) {}
  geometricBounds = ["9mm", "100mm", "139mm", "5mm"];
  fillColor = "Black75";
  textFramePreferences.verticalJustification = 1667591796;
  textFramePreferences.insetSpacing = "5mm";
  }
  myEntry.paragraphs.item (0) .applyParagraphStyle (myParagraphStyleEntry, true);

  
  

  var myEntryStory = myEntry.parentStory;
  var myStoryOffset = myEntry.lines.item (0).insertionPoints.item (0) .index;
  var myDataMergeProperties = myDocument.dataMergeProperties;
  var myEntryPlaceholder = myDocument.dataMergeTextPlaceholders.add (myEntryStory, myDataMergeProperties.dataMergeFields.item (0));

  
  

  Insert the date/time text block
  DateTime var = myDocument.pages.item (0).textFrames.add ();
  myDateTime.label = "Date & Time Field";
  with {(DateTime)
  geometricBounds = ["4mm", "100mm", "6mm", "70mm"];
  content = "00:00 00.00.00";
  }
  myDateTime.paragraphs.item (0) .applyParagraphStyle (myParagraphStyleHeaderRight, true);

  var myDateTimeStory = myDateTime.parentStory;
  var myStoryOffset = myDateTime.lines.item (0).insertionPoints.item (0) .index;
  var myDataMergeProperties = myDocument.dataMergeProperties;
  var myDateTimePlaceholder = myDocument.dataMergeTextPlaceholders.add (myDateTimeStory, myDataMergeProperties.dataMergeFields.item (0));

  
  

  Insert no entry. text block
  var myEntryNo = myDocument.pages.item (0).textFrames.add ();
  myEntryNo.label = "number of entry."
  with (myEntryNo) {}
  geometricBounds = ['142mm', "85mm", "144mm", "100mm"];
  content = "E-000";
  textFramePreferences.verticalJustification = 1651471469;
  }
  myEntryNo.paragraphs.item (0) .applyParagraphStyle (myParagraphStyleHeaderRight, true);

  var myEntryNoStory = myEntryNo.parentStory;
  var myStoryOffset = myEntryNo.lines.item (0).insertionPoints.item (0) .index;
  var myDataMergeProperties = myDocument.dataMergeProperties;
  var myEntryNoPlaceholder = myDocument.dataMergeTextPlaceholders.add (myEntryNoStory, myDataMergeProperties.dataMergeFields.item (0));

  Here is a modified version of the script of the Ole that shows how to put the three elements of data in three separate text blocks:

  Create a sample data file.
  var monFichierTexte = new File ("~/Desktop/Data fusion Test.txt");
  If the user clicked the Cancel button, the result is null.
  If (monFichierTexte! = null) {}
  Open the file with write access.
  myTextFile.open ("w");
  myString = "Name\tAddress\tCity\r";
  for (var myCounter = 0; myCounter< 20;="">
  myString = "file:" + myCounter + ', field: ' 1 + '\t'; "."
  myString += "file:" + myCounter + ', field: ' + 2 '\t'; "."
  myString += "file:" + myCounter + ', field: ' 3 + "\r"; "."
  }
  myTextFile.writeln (myString);
  myTextFile.close ();
  }

  myDocument var = app.documents.add ();
  myDocument.viewPreferences.horizontalMeasurementUnits = MeasurementUnits.points;
  myDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.points;
  myPage var = myDocument.pages.item (0);

  var myNameTextFrame = myPage.textFrames.add ({geometricBounds: [36, 36, 252, 252], content: "name :"});})
  var myAddressTextFrame = myPage.textFrames.add ({geometricBounds: [288, 36, 504, 252], content: "address :"});})
  var myCityTextFrame = myPage.textFrames.add ({geometricBounds: [540, 36, 756, 252], content: "City :"});})

  myDocument.dataMergeProperties.selectDataSource (myTextFile);
  var myDataMergeProperties = myDocument.dataMergeProperties;

  var myNameTextFrame.parentStory = monarticle;
  var myStoryOffset = myNameTextFrame.lines.item (0).insertionPoints.item (-1);
  var myNamePlaceHolder = myDocument.dataMergeTextPlaceholders.add (monarticle, myStoryOffset, myDataMergeProperties.dataMergeFields.item (0));
  monarticle = myAddressTextFrame.parentStory;
  myStoryOffset = myAddressTextFrame.lines.item (0).insertionPoints.item (-1);
  var myAddressPlaceHolder = myDocument.dataMergeTextPlaceholders.add (monarticle, myStoryOffset, myDataMergeProperties.dataMergeFields.item (1));
  monarticle = myCityTextFrame.parentStory;
  myStoryOffset = myCityTextFrame.lines.item (0).insertionPoints.item (-1);
  var myCityPlaceHolder = myDocument.dataMergeTextPlaceholders.add (monarticle, myStoryOffset, myDataMergeProperties.dataMergeFields.item (2));
  myDocument.dataMergeProperties.mergeRecords ();
  Alert ("Done");

• a website, larepubblica.it, is opening corrupted, it opens very well on other devices, is there a problem on my computer?

  It's strange, the site, which i open all day, is all messed up. It opens fine on other computers, so I don't think that this is the site...
  any ideas? I got out of my favorites and reloaded it, still all messed up
  again, this is the news site Italian La Repubblica
  Thank you

  Brian

  Hello brian, at first please try to clear the cache & cookies of larepubblica.it and reload the page.

  for the more common solutions on this topic see also sites look bad or display differently they should

• Adobe Media Encoder after the first minutes of remaining encoding begins to rise? Why is that happening and how can I solve this problem?

  Hello

  I started having problems with encoding right from the first few minutes (or hours) for the encoding of my project, the time remaining to encode begins to increase. For example, I may have an hour left of encoding time and then time from 1 hour to 1 hour 5,10,15 minutes and so on.

  I've been coding of projects without problem and when this happened until I cleaned my cache and media caches to folders and it had been very well. This time, however, this same solution that doesn't work.

  What are some recommendations? Someone at - it experience this before?

  Thank you!

  Please, try to disable the Native import and see if it improves anything.

  In the SOUL, in the menu bar, go to Edition > Preferences > General >

  Uncheck the "Import sequences in native mode."

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Hi Chaz,

  I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

  Please answer these questions to get a better understanding of the issue.
  1 have changes made to your computer before this problem?
  2 shut down other applications while they are in use?
  3. do you get an error code?

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the troubleshooter of app.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Open this link to launch the troubleshooter.

  Method 2: Update the application.

  Method 3: Reinstall the application.

  This link has the steps that you can follow to update and reinstall the application.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Feel free to use the forum for any other issue of Windows, you may have.