Palm m515 and Windows 7 (64 bit) - help!

Similar Questions

• Windows PowerShell 3.0 and Windows 7 [64 - Bit (x 64), {System32} and 32 - bit (x 86), {SysWOW64}] O.S.:

  Windows PowerShell 3.0 and Windows 7 [64 - Bit (x 64), {System32} and 32 - bit (x 86), {SysWOW64}] O.S.:

  (Originally titled: "Windows PowerShell 3.0:")

  1. run "C:\windows\System32\WindowsPowerShell\v1.0\powershell_ise.exe" is the title "Windows PowerShell ISE" which should be the 32-bit version;

  AND,

  2. run "C:\windows\sysWOW64\WindowsPowerShell\v1.0\powershell_ise.exe" has the title "Windows PowerShell ISE (x 86)" which should be 64-bit.

  BUT,

  3 does not (x 86) (x 64) and stand 32-bit for the 64-bit versions of programs?

  AND,

  4 menu of program "help" or "Windows PowerShell ISE" has an article "about".

  THUS,.

  5. Why are the titles indicating no 32/64-bit version correctly?

  AND,

  6. what version of bits of programs "Windows PowerShell ISE" am really run when I run 1 or 2 above?

  JPD

  Have a read of http://technet.microsoft.com/en-us/library/hh847733.aspx and http://technet.microsoft.com/en-us/library/hh847820.aspx and http://www.samlogic.net/articles/32-64-bit-windows-folder-x86-syswow64.htm I hope this can help. (assuming I've understood your question).

  Basically, the "System32" folder is for 64-bit files and the "SysWOW64" folder is for 32-bit files

• I have lenovo g560 laptop and Windows 7 64 bit, but my laptop computer webcam does not tell me how to use it

  I have lenovo g560 laptop and Windows 7 64 bit, but my laptop computer webcam does not tell me how to use it

  Help/support on the Lenovo support site or their forums, review its their webcam and so does not part of win7

• Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?

  give me the link?

  I need the latest package driver.

  -Thank you

  Please use BC Assistant.

  

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• I need a PCI device to my Sony vaio model No. VPCEH1AFX and Windows 7 (64-bit).

  I have laptop Sony Vaio model # VPCEH1AFX and Windows 7 64 bit as my operationg system.

  I uninstalled the PCI Bus driver mistakenly, and now I'm disturbing to get this driver please provide me with the driver.

  PCI bus:

  Small ID:

  PCI\VEN_10EC & DEV_5209 & SUBSYS_908B104D & REV_01

  PCI\VEN_10EC & DEV_5209 & SUBSYS_908B104D
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

   

   

  Try the Driver of Intel Management Engine Interface, or the Analyzer Extension of Firmware.

• HELP PLEASE! WUSB100 ver. 2 and WUSB54GC worm. 3 and Windows 7 64 bit

  So I got both of these cards and can not get either to work with Windows 7 64 bit installation. The WUSB100 presents on the compatibility list as being compatible with 32-bit and 64 - bit Windows 7. The worm shows. 3 WUSB54GC is compatibile with Windows 7 32 bit only.

  In both cases I get an error 211 and uninstalled and restarted the computer more than 6 times with the same result. In both cases, Device Manager displays the device as being installed and working properly. However, I have never displayed a wireless adapter in network connections and it never shows the available wireless connections.

  Any suggestions on what I can try before I tell all my clients to stay away from Cisco/Linksys products when it comes to Windows 7?

  Thank you

  Craig

  I was able to download the latest drivers from Mediatek which apparently took Ralink. The latest drivers for version WUSB100 2 here:

  http://www.MediaTek.com/en/downloads/

  Select the first:

  USB (RT2870 / RT2770 / RT307X / RT2070 RT357X / RT3370 / RT8070 / RT5X7X / MT7610 / MT7601/MT7612U)

  The WUSB100 uses the chip of the RT2870 and this installation package updated the existing installation without having to unplug or restart the computer. He now works very well.

  I was put on the right track by reading some previous posts years ago who suggested to go to Ralink tech which is no longer available, but I was able to understand.

  Linksys should remove compatible drivers 'so-called' because in fact they are not, and do not work. They might want to consider getting the above driver and add to their clients in order to save some people the aggravation.

• Palm TX and Win 7 64 bit compatibility

  Basic Palm or win7 seem to have an answer to when will be solved compatibility problems.  In the meantime, I have loaded the drivers updated; my computer is a new dv6 with 64-bit Win home prem 7 and blue ray and still I can't connect with my Palm TX.  Any help or suggestion?  Thank you.

  Hi Rich01A,

  I tried to verify the information on the compatibility of Palm TX with Windows 7 and I have been unable to find information about it.

  Access the link below for information on the compatibility of the Palm TX with Windows 7.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?s=Palm%20TX&type=hardware&OS=64-bit

  First of all, I suggest you to check with the manufacturer of Palm TX, if there are any updated drivers for Windows 7.

  However, you try to install the program in compatibility mode in Windows 7 by following the steps below:

  1. open the program compatibility Wizard the by clicking the Start button, clicking Control Panel, click programs, and then clicking on use an older program with this version of Windows.
  2. follow the directions in the wizard.

  If you are unable to install a program, insert the installation for the program and, using the wizard disk, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. The wizard is not designed to work on programs that have an .msi file name extension.

  To change compatibility settings manually for a program, right-click the program icon, click Properties, and then click the Compatibility tab select Windows XP SP2 or Windows Vista and select the run as Administrator option. Click on apply and Ok. Try to install the program again.

  Access the link below to learn more about how to make older programs in this version of Windows:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the above information helps.

  Post back and let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DeskJet 970CSE and Windows 7 64 bit

  Just upgraded to Windows 7 64 bit and my 970CSE HP refuses to work with her. I suspect that the driver. He

  worked very well with XP Pro.

  Try and follow this document let me know if that helps

  http://support.HP.com/us-en/document/c01874792

• LaserJet 5 M and Windows 7 64 bit - duplex problem

  I have a Laserjet 5 M Postscript with a duplex printing unit in my home network.

  Windows 7 64-bit, the duplex printing option is not displayed.

  1. I reinstalled the driver - cool from MS
  2. I manually changed the ' properties/device settings' to indicate the duplex unit is "installed".   I have administrator privileges.
  3. I rebooted the machine.

  However, under preferences - or for actual printing, under available - possibility of double-sided printing is not displayed.

  Any help will be appreciated.

  My two machines from Vista (32 & 64 bit), with no problems, print double-sided on it.

  Alright George. I have discussed this with my colleuges and we agree that this thread would be better suited in the business forum. Since it is a printer and we focus only on consumption patterns. We would do a disgrace to not send you over there.

  Here is a link to Board commercial laserjet.

  Business - LaserJet HP Support Forum

  Im going to have a moderator hover over this thread to the business section for the best chance to get a solution.

  Take care!
  Sean

• WPS54GU2 Printserver and Windows 7 64 bit

  Hi everyone, this is the first time that I posted here.

  I read all the posts about defining the TCP/IP and LPR settings WPS54GU2 printserver and have no problem getting the printserver to connect to my printer HP Deskjet 990cxi printer via the USB port of the printserver. I can print a test page and also print from programs.

  My problem is that when I stop my Windows 7 64 bit PC and boot to the top again once the status of the printer appears offline and I can't connect to it. The only way to connect to it is to reinstall again.

  This problem does not seem to have been covered anywhere else, so you guys can provide any help would be greatly appreciated.

  Thanks for the reply dibbler. I solved the problem. My Windows 7 64 bit version is not "use printer online", but there is no "use printer offline". When I found that the "use printer offline" has been checked. I unchecked it, restarted and hey presto my printer was also prepared. Problem solved!

• WPSM54G and Windows 7 32 bit and HP 6110xi

  I hope you can help out me.  I have read the posts and thought I followed everything and do everything as well as the U of M has done by getting the big 10 Championship.  I followed the instructions in the messages... Click the reset button to get used to the internet IP address diagnostic test page explore to change the IP address to the print server to 192.168.1.98.  the subnet and the gateway are the same as on the diagnostic test page.  I can do a test print page since the trouble-free printing server.  I have no problem printing if I connect the HP6110xi printer via the USB port on my Toshiba (windows 7 32 bit - just improved it this week last of Vista).  However, whenever I try to print from my Toshiba via the print server that I get nothing - it goes to the queue from print and nothing happens.    I added the port, entered 192.168.1.98 IP address, set the LPR Protocol, I tried the names of queue of LP1, L1 and L2 (and rebooted after each change), I have not changed the printer driver which was installed when I plugged the printer directly to the computer.  I also tried to add a local printer and a network printer with no luck.  Any ideas?

  Right-click on the printer and click Properties... Click the Advanced tab and check the option "Print directly to the printer" and check again...

• Silverlight and Windows 7-64 bit. Installation issues.

  XP was a problem.  Now I have Windows 7-64 bit.  Not all my Zune music files have been saved.  Tried to reinstall Zune.  Did.  Then I get this message from Silverlight.  Downloaded 5 times.  Does not appear as if it has been downloaded.

  Also having a problem with my Zune being recognized by my computer now.  * sigh *.

  Also, I need to know if I can replace the music files on my Zune device to my computer or my collection.  I feel I'm starting all over again and I'm lost with this.

  Hi QZune,

  1. you receive an error message during the installation of Silverlight on the computer?

  See the below Microsoft article for Zune player not recognized by the computer and try the steps mentioned.

  Your Zune device is not detected by your computer or the Zune software

  http://support.Microsoft.com/kb/944909

  See the Microsoft article below to find out how to reinstall the Zune software.

  How do I reinstall the software of your Zune HD player

  http://support.Microsoft.com/kb/974593

  For additional support post your query in the Zune forums.

  http://forums.Zune.NET/default.aspx?forumGroupID=3

  For the Silverlight control if Silverlight is installed on the computer

  (a) the Get programs by clicking the Start button

  (b) click on Control Panel, click programs, click programs and features

  (c) in the list of audit of program installed if Silverlight is installed or not.

  If you do not have Silverlight in the list, and then use below to download and install Silverlight 4

  If you see Silverlight in the list, then use the link below to first uninstall and then restart the computer and install it back

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.