2 groups of ESXi allow the same network for vmotion?

Similar Questions

• create new homegroup n on the same network

  I recently moved in with a family who had set up a homegroup on a network. I'm on the same network, but I want to create a homegroup for myself. When I click on the link in the residential group, the only option I get is to join the current residential group, which has already been put in place. I've read elsewhere, if you change the public network, go to advanced settings, then change back to the home network, it will give you the ability to create a homegroup. But it did not work for me. He immediately returned to a home group with the only option to join. How to set up a second group of residential on the same network?

  Hi Shiv,

  Unfortunately, this is not possible. We cannot create more than one homegroup on the same network.

  Hope it will be useful.

• 2605dn will not print from a computer, but another computer on the same network print very well.

  The two machines running Win 7 64 bit, both on the same network (such as a printer) all with cable connection to the local network. A single machine prints fine, but since a few days, my PC will not be printed on the printer. PING and TRACERT it is correct, and I tried removing/reinstalling the printer several times. Using the PCL6 driver, as well as a specific driver for printer have same results.  Anyone else having this problem?

  After almost 12 hours of continuous hair-pulling, finally ran across the solution on a Microsoft forum site: it turns out that the problem was a recent update of anti-virus software (McAfee, specifically) who changed the firewall settings.  Can't seem to get the AV software allow constantly to the printer, but temporarily disable the firewall in the AV software has solved the problem.  (the other machine running another AV software package)  I have to just be careful during this 15 minute period.

  Anyway, if you have a similar problem, make sure to check the firewall settings.

• CANNOT ACCESS VISTA BY XP AND CANNOT ACCESS XP SINCE VISTA WITHIN THE SAME NETWORK MACHINE

  I'm using vista Business. while I try to view other machines with the same working group in the same network... My machine only manifests itself in the network... No, other machines are available... and will have remote desktop also does not work if I have an address user name and password and IP address of the remote computer running xp...  Help me.

  Hi NIRAJ KARKI,.

  You can't use Remote Desktop connection to connect to remote computers running Windows XP.

  This package contains the Link Layer Topology Discovery () LLTD Responder. The network map on a computer running Windows Vista presents a graphical view of the computers and devices on your network and how they are connected using the LLTD protocol. The LLTD Responder must be installed on a computer that is running Windows XP before it can be detected and appear on the network map. After you install this item, you may have to restart your computer.

  I suggest to install Layer Topology Discovery LLTD Responder (KB922120) (Link) and check if the problem is resolved.

  Link Layer Topology Discovery (LLTD) responder (KB922120)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481e-BA11-37F485FA34EA&displaylang=en

  You can check the link below.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Internet access on the same network

  Hello

  Thank you in advanced for your time and your help.

  We have a CISCO PIX 515E firewall. The idea is to allow some users to navigate the Internet, while keeping others totally blocked him. They are all on the same network inside.

  What would be the best practice? Is this possible?

  Thank you!

  You can also configure a proxy and allow only the address of the proxy on the firewall. So, forcing everyone to have a user name and password.

  You can use the Cisco ACS with the PIX Server make AAA - authentication (which can come out) permission (what they can do - ports, services) and accounting (what they did).

• Windows 8 and Windows RT can't find/see each other on the same network

  My problem is very simple, but I can't for the life of understand me.

  I have a Windows 8 PC and a tablet of Surface RT, they are both connected to the same network but I can't connect to the home group. I am not able to see computers, when I click on networks so connected devices.

  When I disable the security of password of my router, everything seems to work properly. I don't want to leave my network available to everyone however. so as soon as I put a password on my router now I can't pick up devices and home group. I tried to change my network advanced setting but who just so used to work. I don't know what there is to do.

  This is for both of my devices, I don't want to leave my router without protection. Is there a way to fix this?

  I think I found the answer to the problem. I went to HomeGroup settings on my PC and on my Surface and I checked everything on making default setting the private setting may be available on the network.

  After that, I went to make sure that the firewall on my computer has been set to its default value. Then I went to check my firewall antivirus (BitDefender) and noticed that the network was listed in public, that's why I could not pick up other computers.

  So I checked the network in order to be under this judgment in Bitdefender and everything seems to work now. My surface to pick up the computer and the home group.

  Check your anti-virus firewall settings, perhaps that is the reason.

• Advantages and disadvantages of the use of the same network card to the network management and production (all my virtual machines) VLAN?

  Hello

  I have an ESXi. The management network and the virtual machines vlan through the same network adapter.

  What the disadvantages are to do?

  Can you help me please?

  Thank you in advance,

  Kind regards

  Garish

  Well well, in this case. This is a perfect case of SPOF, try to reach NIC teaming to avoid this.

  At least two cards physical network is necessary in your hardware ESXi host to do.

  Download an official guide of VMware Networking from the following URL, it has got everything you need and much more.

  http://pubs.VMware.com/vSphere-55/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-552-Networking-Guide.PDF

• Practically in segregation a virtual machine within the same network

  We have a VMware ESXi 5.0.0 (504890) host that has physically 4 network cards. We run 3 VMs on that host and turning a new config. However, this new virtual machine will replace our old Windows DC, DNS, server DHCP etc., and we'd like to config it before going live - will not perform us a migration of swing. We are a little worried that it can interfere with our direct network and that's why I would like to somehow almost segegrate it.

  For the moment, we have a single vSwitch0 linked to all our VMs and management card:

  

  What is the best way to do this so that our new DC (with the same domain name and within the same network) can be configured without it interfering with the current network.

  Thanks for your comments.

  Oliver

  Hello

  You can create a second vSwitch without physical network interface cards. Create a VM Portgroup on this vSwitch.

  You can configure your new virtual machine to use the Portgroup. So, he won't have any connection to your network.

  The good thing is, when you want to test things with a customer, you can create a second VM and configure it to the same VM portgroup on the second vSwitch.

  Two virtual machines on this Portgroup can communicate with them because the traffic is handled internally by the host.

  Tim

• Can I install VAC on Mac and PC on the same network?

  My license is a license for the team and if I need to install it on my MAC and PC.

  They both were connected to the same network, it's illegal?

  I will only use MAC or PC in this network.

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

• How to make an update of location to a group of photos at the same time?

  How to make an update of location to a group of photos at the same time?  This used to be a feature in iPhoto.

  I use El Capitan 10.11.6 and Photos 1.5

  If yu have OS X 10.5.1 s you say that you can not - with OS X 10.11.6 Photos 1.5 (a free update in the app store) you select them and info - enter the location and it will apply to all photos

  LN

• MBA on the same network arrested in connection and iMac

  I got an iMac and MBA on the same network more than 5 years. Today, he ceased to recognize each other. The MBA, the iMac is listed in the Finder window, but when I click it, window is empty and I have no Conneded. I click on connect as, again and again, and nothing happens. On the iMac, the Finder window list also the MBA and unrelated. Connect as > enter the name and the password. I copied the name of iMac on name and entered the password (even, 10 years), and I get a stirring display.

  That is what it is? Thank you

  Hello ArmandoWyo,

  Thank you for using communities Support from Apple. I know have a problem using your computers Mac 2 together, it's not what you expect. These computers have worked together on the network before, good news as this should be as easy as some basic troubleshooting or setting up sharing on the network again. The following articles will help to solve your problem:

  OS X El Capitan: connect to shared computers and servers for files on a network

  OS X El Capitan: If you do not find the computer you want to connect to

  See you soon!

• Two Macs can connect to a URL, another on the same network may not

  So far, I can connect this behavior to a unique URL only - but of course, it's an I need to get in order to save some software on this particular machine.

  I emptied the cache, flushed the DNS cache and checked that I use valid DNS servers. It isn't Safari, chrome this brings. Two Macs reached the URL without any problem, but this new model Mac Pro simply will not reach it and traceroute expires after a few jumps. All three machines are on the same network, all three use the same DNS servers. I rebooted several times.

  All three Mac running the latest El Capitan. The two reach the URL are a MacBook Pro and a Mac Mini Server.

  I'm puzzled.

  Please note that a traceroute on all three machines reveals the slowdown even at the same jump in the chain, but only the Mac Pro seems to have trouble with it.

• I need a few files to restore from a time machine backup to a different MacBook Pro that is connected to the same network

  Hi, I recently "lost" my MacBook Pro because of water damage.  Fortunately, I've been using time Machine\Capsule and I have a MacBook Pro that is connected to the same network/device.  I need to restore a few files in the backup TM of the computer 'lost' on computer 'work '.  I was able to 'Browse' the other TM backup (click the icon TM plus the button 'Alt').  The Web browsing is extremely slow (took about an hour to break down / find the file on the network).  However, I tried to copy the file and I get errors of the alias.   Please advise me on what I am doing wrong.

  Thank you

  ggnpeter

  PS My OS is 10.9.5

  Visit Time Machine FAQ of Pondini helps with Time Machine.

• Can I use a Gen 4 and Gen 3 ATV on the same network?

  Can I use a Gen 4 and Gen 3 ATV on the same network?

  Yes.

• The Switch configuration and Wi - fi router in the same network

  Hi team,

  I have here is the configuration currently as below in the image. To describe the same internet cable is connected to a Cisco switch, which is connected to the PC in LAN (wired). A switch output is connected to the entrance of the wireless router Netgear Nighthawk AC 1900 Smart model of WiFi router # R6900. Wireless devices (laptop) are connected by the router.

  Each device has internet access. However, I am unable to run software LAN or unable to share any file of devices connected to the switch to the connected wireless devices. I can't ping any device the device wireless wired.

  Can anyone suggest what are the settings that I should do or what are the steps I should follow that will make wireless and wired devices in the same network.

  PS Plus early I tried the internet connection to the wireless router and then out of the router to pass, which has solved this problem. But slowing down my internet speed in wired devices. So, is it possible to have all devices in the network even with the current configuration?

  

  Thanks in advance.

  Best,

  Hardik

  I made wi - fi router reset hardware and configured in Access Point mode, that solved my problem.