2 monitors connected again MacBook?

Similar Questions

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Can I use a HDMI monitor connected to my macbook pro? Should which adapter I?

  Can I use an HDMI adaptor to connect my macbook pro?

  What model of MacBook Pro? There are adapters for practically everything.  You can check if audio is also transferred if you need that.

• When I use HDMI to connect my macbook to the TV - it lights for a few seconds, then disappears?

  When I use HDMI to connect my macbook to the TV - it lights for a few seconds, then disappears?

  I tried all 4 HDMI ports

  my computer is 2013 macbook pro retina - tv is a 1 year old samsung

  Try this support article > use your TV as a monitor

  If you have an Apple TV, you can use AirPlay to the screen of your Mac on the TV via HDMI.

• U28E590D monitor connect with IMac 5 k (not compatible.?)

  Hey guys

  It's crazy to my imac 5K can find the monitor and connect too, but the monior is black.

  and when I connect the monitor with my macbook pro it works very well.

  try to go to system-> Preferences-> grouping windows display and then decrease the screen resolution until it works

• How can I restore signal from my Mac Pro to my Viewsonic monitor, connected by VGA?

  I have a Pro Mac OSX version 10.7.5 running. Trendy top is a monitor 24 inch Viewsonic, the only monitor connected. Last week, everything was fine. I stopped him all night and the next morning, when I tried to start, there was no signal from the Mac to the screen.

  The screen displays a 'No Signal' message.

  I checked the entry on the monitor, and it is correctly set to PC.

  The computer starts normally. I can hear him do his thing.

  The monitor starts up normally. No flashing or spots.

  I tried restart, disconnect the monitor from the computer, just stop and unplug it, then reconnected. I tried to plug the old monitor (using VGA connection) and start again, with the same result.

  I tried to recall the NVRAM (found the instructions on this site) and it made no difference.

  It would be appropriate to get a HDMI cable to connect the?

  It seems to me that if the computer does not recognize the monitor, try another cable wouldn't make any difference, but I'm really an 'end user' at this stage and would appreciate any advice.

  Thank you!

  Try resetting the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

  The VGA input and cable works with another computer/device?

  The port of exit on the Mac works with another monitor?

  What model Mac pro?

  What video card is installed in the Mac?

  What output port are you helping?

  Maybe the video card has failed. If yo have an old Mac Pro with an original which is likely to card

• How to connect my Macbook pro (early 2011) with an Intel HD Graphics 3000 512 MB to a LG34UM57-P for the resolution of 2560 x 1600 pixels?

  The maximum resolution that I receive is 1080 p not 2560 x 1600 (21 x 9 aspect ratio - ultra wide angle). My adapterw of the display is a Lindy Adapter Mini displayport to VGA/HDMI cable is a normal black HDMI cable.

  Any suggestions please?

  Yes... go to Preferences system, then poster and Option + click on scale and see what it does for you.  You should be able to get the maximum

  resolution on this monitor, which, as you mentioned is 2560 x 1080. Maybe you could go with just a displayport cable to connect the monitor to your MacBook Pro. I don't know exactly what model or year of MacBook Pro you have, but I guess it's fairly recent. The lindy adapter will do up to 2160 p and not more, so there is that... the only other thing I know is SwitchResX, but you would have to pay a little for that...

  so, here's my suggestions, aside from trying an adapter that supports the WQHD... (loan from 4 k) that is all I have

  John B

• Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  Hi all

  Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  The Mac Mini is the end of 2014 with 2 ports thunderbolt model and is connected to a mini display port monitor.

  I'm just fed up of having to pull on the cable of the Mac Mini to connect the MacBook Air.

  Any ideas? Suggestions?

  Thanks in advance!

  Using the built-in screen sharing are an application like:

  ScreenRecycler

  Only some iMacs support the target Display Mode

  Use your iMac as a display with the target - Apple Support Display Mode

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• HP Z400, nvidia quadro 4000, main monitor connected on DisplayPort does not work

  Hello

  My first (primary) display is connected through an adapter displayport to DVI adapter (HP P/n: 481409-002 HP [email protected]).

  Now when I turn on the PC, the monitor gets no signal.

  I also wrote a message to HP support, but I don't have an answer.

  Support-ticket-no: #71940913 # and #72360491 #.

  Things, I try to solve the problem:

  • another adapter connected --> without success
    
  • connected to another cable DVI --> without success
    
  • Monitor connected to the other graphics card DisplayPort --> without success
    
  • different versions of pilot / installed (certified by HP for Workstation Z400, later Nvidia SolidWorks) --> without success
    
  • A monitor with display port without adapter plugged into the graphics card display port--> it works
    
  • Another monitor with DVI adapter and connected to the DisplayPort --> without success
  • Graphics card on the other slot (bottom) inserted PCIe --> without success
  • Monitor isolated more than a minute of the grid --> without success
  • In Windows 7 (Win and P - key key) the advanced value --> without success
  • Update BIOS to v3.57

  Now I do not continue and write a post here, with the hope of help.

  System:

  • HP Z400 workstation
  • nVidia Quadro 4000 (driverversion 311.66)
  • Windows 7 Pro 64-bit

  Now I need help from you.

  Maybe, we also had such a "phenomenon".

  Thank you!

  Greetings Marco

  Hello

  I wanted to just let know you that the problem has been resolved with the support.

  They sent a new adapter and it worked.
  This is the same adapter as described above.

  Could not believe it yet, but I'm glad that it finally works again

• What is the best monitor for the MacBook Pro?

  I want to get a 27 "monitor for my macbook Pro for my degree. Which is the best alternative for the thunderbolt display, as it is incredibly expensive. Thank you guys

  I prefer Samsung, and I deployed samsung monitors to dozens of designers who I support (27 "), but almost all of them use the same components of the same factories.

• I want to connect my Macbook Air (IOS 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear I

  I want to connect my Macbook Air (IOS X 10.9.5) with my amp stereo House (TEAC I-501DA), which has a USB connection. I followed the steps described in the manual TEAC to install the driver and my Mac says it is installed correctly, but it does not appear as an option in the preferences/system sounds.

  Version 1.1.2.2 El Capitan driver support, then why don't upgrade you your MacBook Air to El Capitan?

• Can I connect my MacBook Pro (13-inch 2011) with my Samsung TV with just a crush for a HDMI cable?

  Can I connect my MacBook Pro (13-inch 2011) with my Samsung TV with just a crush for a HDMI cable?

  I mirrored displays in the preferences (and it is optimized for Samsung 1440 x 900)

  But my TV says "Mode not supported" on display...

  Any ideas appreciated...... has soon

  You should be able to.

• Cannot connect the macbook pro in normal mode

  Cannot connect the macbook pro in normal mode

  Are you getting errors?

  How do you connect? You use Safe Mode?

  What year/model MacBook Pro you are using and what version os OS X are you running?