2 pages in paperback photo

Similar Questions

• How to do a two-page spread in photo books?

  How to do a two-page spread in photo books?

  Hi Myrte Veach,

  If you want to add pages to your photo book project, please follow the steps below.
  
  

  Add, remove and rearrange the pages of book

  You can add, remove, or reorder pages from the book. You can insert new pages anywhere in a book, except between the cover on the outside and the inside cover page.

  Note: A book must have an even number of pages. If the change in the number of pages creates an odd number of pages, Photos automatically adds or removes a blank page to keep the number of pages to an even number.

  Click project on the toolbar, and then double-click the book.

  Do one of the following:

  Add a page: select the page you want the new page to follow, and then click Add a Page in the toolbar and choose Add a Page.

  Set the number of pages in a book: click on the book settings button in the toolbar and drag the number of Pages.

  Remove a page from a book: click on the page to select and press DELETE, or click on the button Add a Page in the toolbar, select the Page to delete, then click on continue. You can also click on the page, select the Page to delete, then click on continue.

  Move a page in a book: rest the pointer over a page number until the page button, and then drag the button on the page to move the page to a new location. You can also select a page, and then drag the button to the page.

  Create a photo book

  The link above will give you a lot of information on the creation of your Photo book. Please use the Apple Support communities to post your question. Good day.

• Place a photo on the same page of a photo book?

  So I did a lot of photo books in the past with iPhoto, I'm working on my first with Photos. I can't for the life of understand me how to move a photo from one spot to another on the same page without removing it completely, and then placing the photo once again in place I want.

  It is a HUGE pain when I don't want chronological photos on the same page. My normal process is to add photos to the page, by increasing the number of photos on the page until I have everything I want, then I move them until. This allows me to just go through the photos unplaced until I get what I want. In iPhoto, it wasn't a problem, but with pictures, it seems that once you have placed a picture, you cannot move. So whenever I want to add a new photo to the page and increase photos by the Photos of say 3-4, page move around randomly and I have to start all over again with the placement. Would not a big deal, except that Photos sorts photos unplaced by date, so when I took a picture to place in a new spot, now I need to go hunting for him again in the list.

  Any help would be great, I hope my question is clear.

  You can drag a photo to a different location on the page:

  • Place the pointer over the photo, click on hold until the photo is displayed outside, and then drag the photo to the Photos area or another location on the page.

  If you drop the photo on a different box of photos with a photo the two photos swap places.

• I want to be able to move freely photos on a Windows Word page, but the photos keep snapping it back in place on the margins. Is it an alignment etc. function that I can disable so I can move photos with the cursor?

  I want to be able to move freely photos on a Windows Word page, but the photos keep snapping it back in place on the margins. Is it an alignment etc. function that I can disable so I can move photos with the cursor?

  I want to be able to move freely photos on a Windows Word page, but the photos keep snapping it back in place on the margins. Is it an alignment etc. function that I can disable so I can move photos with the cursor?

  =================================
  Change the text wrapping...

  In Word 2007... I'm going to... Format / dressing / thanks to...

  Then I can use the arrow 4 positions to drag photos anywhere
  I chose.

  If you want to drag the photos on the page...
  I don't know how to do this. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• What is the maximum number of pages for a photo book

  Is there a maximum number of pages that can be used to make a photo book? I have one that I am trying to download from 88 pages, but it will not download. Thank you.

  100 pages is the Max - 20 min

  have you presented in the book preview? Saw a print project in Photos or iPhoto to avoid problems - Apple Support

  What is the exact reason that you can not download?

  LN

• What are the dimensions of a spread of 2 pages in a photo book great connected to the 11x8.5?

  I'm building a provision tailored to a large cardboard cover, 11 "x 8.5" Apple products photo book printing.  I build my images full page in Photoshop and Illustrator and then import in Photos v.1.5 to assemble the book.  I need to know the dimensions accurate for a 2 page spread in this size of the book.

  The overall dimensions of the book are based on the format picture book. Most photo 'frames' are in the proportions of 3:4 format. The exact layout is based on the page you select in the options of picture book. It is not something that you can "import" a provision to third parties.

  If I misunderstood your question, please explain in more detail.

• Sharing service does not work in Pages, Keynote, Numbers, Photos and calendar

  Among the interesting features that I used for a while is the ability for a large number of Apple applications, such as Pages, Numbers, Keynote, and Photos to share content using the "Send a copy" feature (Pages, Numbers, Keynote) or 'Share' (Photos). Unfortunately, these sharing services are no longer works for me in any application, and they have not been for several weeks.

  So what happens is, for example, when I'm in Pages and I select 'Share' icon in the menu bar and then "send a copy" and I select "Mail" (or all the options on the list besides), it gives me a dialogue window asking me the format I would like to share (Pages PDF file, Word Doc etc.). When I choose an option, a process that happens in the background that is supposed to send the file to Mail, open a new message, and then add the file as an attachment. However, in my case, the process seems to get stuck somewhere because the Mail opens not with a new message, but Pages continues to think that he is trying to send the file via mail because all options of sharing are grayed out. So that I can continue to work on the document, the sharing feature is no longer available and that I must leave the Pages and then relaunch the application. This same behavior happens in Numbers and Keynote trying to share a document, and this regardless of the application that I'm trying to share it with.

  This type of thing happens in the pictures when I select a photo and try and hand using Mail, except in the case of Photos, I can't continue to use the application and I need to force quit and raise in order to work again the application.

  Another note, which I think is related, is that when I get an email in Mail that has a calendar attachment (file here) and I double-click the attachment file, it will open the calendar but the new event may not be listed or available to add. I enter the information manually.

  In troubleshooting, I rebooted the computer several times and I have also checked my preferences, extensions and to my knowledge, I don't have any installed third-party extensions (there is no third party extension that appear under the option 'All' on the left side). Short to wipe my hard drive, and then reinstall the operating system and all my applications, I don't know where to look to try to solve this problem. Also, I can't identify any specific event (installation of the software, updated software, etc.) that causes this problem to occur. I also tried to connect to a guest on my computer user account, but the same issues were present in the user account guest that I described above, leading me to believe that it is not a question of corruption within my user account, but rather an entire system.

  Mac Pro 6.1

  3.5 GHz 6-core intel CPU Xenon E5

  OS X v 10.11.2

  64 GB OF RAM

  Pages v5.6.1

  Keynote v6.6.1

  3.6.1 Numbers

  Photos v1.3

  Digital camera RAW 6.18

  Digital Camera Support RAW 6180

  Quit all applications. Check system preferences: Extension Panel: Menu share the missing part: send a copy the submenu items. If they are present, in order to check them, and then re - they will appear in the submenu of the previous. You may need to restart after selecting them.  If they are missing completely, then it is very likely that your launch Services database is corrupted. There is a difficulty.

  Others have encountered this problem, and what follows has helped many to restore the sharing: send a copy the submenu items. In the Dock, click on Launchpad: other: Terminal. Triple-click to select and then copy and paste the following in your open Terminal window. It will probably just run and finish, but if not, press return. There is no way out of this activity. When you get a new Terminal prompt, just left Terminal. Reset.

  /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -seed -domain local -domain system -domain user
  

• Why red x now appear on the Web pages instead of photos?

  Before yesterday, I have never seen red x, the kind that you do a right click on the picture to show. Now I have all red x and when I right click, photos will not appear. What the hell have I done?

  What browser you use.

  Is not the problem of your windows, it may be problem with your internet connection
  Sometimes, you can install software to filter and can block images
  If you are a firefox user, try
  • At the top of the Firefox window, click the Firefox (Tools menu in Windows XP), and then click Options.
  • Options window, select the content tab.
  • Make sure there is a check mark next to load images automatically click Exceptions... next to load images automatically to open the Exceptions - Images window.
  • The exceptions - Images window, look at the list of sites. Make sure that the sites with which you are having problems are not in the list. Click close to close the Exceptions - Images window.
  • Click OK to close the Options window.
  If you are a user of IE, try
  • On the Tools menu, click Internet Options.
  • Click the Advanced tab, and then verify that the show pictures check box is selected in underMultimedia.
  • Click OK.
  or try
  • On the Tools menu, click Internet Options.
  • Click the Security tab and then click level by default (if available) for the zone that contains the Web page (for example, Internet area).
  • If you use Internet Explorer 6, click the Privacy tab, and then click default (if available).

• How to print 4 different pictures on one page with Windows Photo Gallery?

  Could not find any way to add different photo once I chose one to print (so I can print 4 different photos on A4 only once.)

  Select 4 photos in the photo gallery
  In the top of the page, click on print, then print again (or just do CTRL P on your keyboard)
  When print photos screen opens upward, on the right-hand side, scroll down to 3.5 x 5 in. (4)
  Make sure that in the bottom of the box for photo to Fit the frame is selected
  At the top, you can adjust the PaperSize, quality, Type of paper and that printer.
  Once completed your settings, click print at the bottom

  That should do it... If this solved your problem, please mark this as the answer.

  Thank you..

• How can I print a page full of photos without leaving space on the side?

  I just bought a printer HP deskjet 3050, and every time I print a picture, it does not fill the page.

  See the following HP (tab sheet) document...
  It indicates that the HP Deskjet 3050 all-in-One
  Impossible to print borderless photos.

  HP Deskjet 3050 all-in-One
  http://www.shopping.HP.com/product/printer/DeskJet/1/storefronts/CH376A%2523B1H?JumpID=ex_r11400_us/en//IPG/_ps_g_hpdeskjet3050/Deskjet3050BMM&s_kwcid=TC | 17989. HP % 20% 2Bdeskjet % 20% B 2, 3050 | S | b | 7658617756

• HP photosmart 8250 test page has color photos and cyan lines

  I have a HP photosmart 8250 which had a paper jam, and then I got an error message that says the print carriage was stuck and deserved to be deleted. I set myself with the help of HP printed tips on this Web site. But now, with a test print, it shows cyan streaks a horizonal while all other colors are OK. These horizonal trails in cyan cause photos to be striped. I put in a new cyan cartridge, and it's the same horizontal sreaks in images. Don't know if a manual of instructions for my printer that would be discussed or not.

  Tom

  I already reported this, my color cyan in HP Photosmart 8250 printer was streaked in my page series of tests, and the images are out streaked. HP had resolved just before my problem on this part of the aid of their website which began as with a "paper jam" error message, which quickly turned to an error message "unlock the printer cartridge. I followed HP suggestion for this, by opening the plastic top/door on the ink cartridges, then open the next door plastic inside and the movement of the cartridge that has been on the far right, left, as the instructions said and I saw a little piece of paper that I removed with a pen to write with the cap on.  I printed the test page, and then the color cyan was marked. HP said, do not have it in front of me now, but use the print mode 'Best '. And the streaks in the cyan color went. I ordered a new printer, HP, of course, because of the quality and the helpline in part, and it sits in my living room, unboxed, now, because my old printer does not work. HP just helped lined themselves on a sale. I'll send a new back. Thank you for everything.

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• -Panel Page printing module: Options of Page & info lost Photo

  In the print module, there are only 4 functions rest now in my version of the final version of LR3:

  1. the Page background color.

  2. identity plate

  3 tattoo

  4. turn off the Guides.

  Victoria Bampton describes also features with a screenshot of LR3b2 in his "lack of FAQ-Roughcut" (page 366):

  4 cut guides did not exist, but rather options Page with check boxes, and then 5. Photo Info area drop-down, then 6. Size of the font.

  That's happened?

  How to cover the following use case: create an invitation with photos and own free text on date/time/location?

  Please do not respond to "export a jpg in Lightroom and then use MS Word or any other editor.

  The beta phase I got the impression that the creation of such a pdf should be possible directly from Lightroom.

  That's happened?

  You use another "style of provision. The number of available options depends on the style of layout you use. You must select the style "single image/Contact sheet' to get all 6 options you're looking for.

• Firefox slow on pages with many photos

  I have problem with large pages such as www.wp.pl
  When this scrolling jumps. Works fine on chrome.
  play 4 k movies on youtube's horror. on chrome as well, but on the works of fine IE (proc use abot 25%)

  I have win8.1, a4-5000 amd (1.5 GHz x 4) and ge force gt 740.
  processor runs on 20-30% max during navigation (on any browser), clean windows installation.

  I solved it by myself. Just turned off the coast of NVIDIA 3D VISION add on (he settled with the nvidia drivers). Now it works smoothly.

• How can I combine 2 page .pdf CAP/photo on the same page?

  I have the front and the back of my driver's license in 2 pages of a .pdf file.

  How can I have them both on the same page, so that they are indeed on 1 page only, and the copy can be printed on 1 page that too.

  Print to the Adobe PDF 2 pages per sheet format.