2 printers on the same network is not well.

Similar Questions

• Two Macs can connect to a URL, another on the same network may not

  So far, I can connect this behavior to a unique URL only - but of course, it's an I need to get in order to save some software on this particular machine.

  I emptied the cache, flushed the DNS cache and checked that I use valid DNS servers. It isn't Safari, chrome this brings. Two Macs reached the URL without any problem, but this new model Mac Pro simply will not reach it and traceroute expires after a few jumps. All three machines are on the same network, all three use the same DNS servers. I rebooted several times.

  All three Mac running the latest El Capitan. The two reach the URL are a MacBook Pro and a Mac Mini Server.

  I'm puzzled.

  Please note that a traceroute on all three machines reveals the slowdown even at the same jump in the chain, but only the Mac Pro seems to have trouble with it.

• 2605dn will not print from a computer, but another computer on the same network print very well.

  The two machines running Win 7 64 bit, both on the same network (such as a printer) all with cable connection to the local network. A single machine prints fine, but since a few days, my PC will not be printed on the printer. PING and TRACERT it is correct, and I tried removing/reinstalling the printer several times. Using the PCL6 driver, as well as a specific driver for printer have same results.  Anyone else having this problem?

  After almost 12 hours of continuous hair-pulling, finally ran across the solution on a Microsoft forum site: it turns out that the problem was a recent update of anti-virus software (McAfee, specifically) who changed the firewall settings.  Can't seem to get the AV software allow constantly to the printer, but temporarily disable the firewall in the AV software has solved the problem.  (the other machine running another AV software package)  I have to just be careful during this 15 minute period.

  Anyway, if you have a similar problem, make sure to check the firewall settings.

• the Air iPad does not connect to a printer to air even if the two are on the same network

  DIIAP Air does not connect to air printer, even if the two are connected to the same network. Message "Air printer not found".

  Readhere: printing from your iPhone, iPad or iPod touch - Apple Support

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• MBA on the same network arrested in connection and iMac

  I got an iMac and MBA on the same network more than 5 years. Today, he ceased to recognize each other. The MBA, the iMac is listed in the Finder window, but when I click it, window is empty and I have no Conneded. I click on connect as, again and again, and nothing happens. On the iMac, the Finder window list also the MBA and unrelated. Connect as > enter the name and the password. I copied the name of iMac on name and entered the password (even, 10 years), and I get a stirring display.

  That is what it is? Thank you

  Hello ArmandoWyo,

  Thank you for using communities Support from Apple. I know have a problem using your computers Mac 2 together, it's not what you expect. These computers have worked together on the network before, good news as this should be as easy as some basic troubleshooting or setting up sharing on the network again. The following articles will help to solve your problem:

  OS X El Capitan: connect to shared computers and servers for files on a network

  OS X El Capitan: If you do not find the computer you want to connect to

  See you soon!

• my windows says that another computer is running in the same network with the same ip address, please contact

  Today morning when I opened my samsung mini, it displays a message that another computer is running on the same network with the same ip address please find a solution for this

  In most home networks where multiple devices are connected to a router, router will assign an IP address to each device (via DHCP). This method keeps usually different devices to get the same IP address, but if you restart your router, it will not address remembered that he released before it was restarted.  This condition can also occur if you manually assigned an IP address to a device located in the router's DHCP range.  If the problem is not due to manually assign an IP address, then this condition will be corrected over time.  But if you're in a hurry, you can unplug your router from the wall and stop all computing devices on it.  Then plug the router back in and bring up all your devices again one by one.

  HTH,

  JW

• BEFSR81 with WRT54GS to the same network?

  I currently have a LinkSys BEFSR81 connected to a cable modem that I need at least 6 ports wired to my home network.  I also have a WRT54GS which is currently unused, but I want to add to the network so I can have both wireless connectivity.

  Assuming that it is possible, what is the best way to combine the two units in the same network?  The simply connectable WRT54GS downstream of the BEFSR81 via one of the ports open?  I guess I'll have to change the IP address of the wireless device for individually accessible for configuration, check status, etc.  All the other things I have to do?

  Please notify / thank you!

  I found the solution in a previous post, sort of.  Here's what worked for me:

  (1) connect direct PC to WRT54GS

  (2) turn off DHCP and change the WRT54GS IP to 192.168.1.2 (192.168.1.1 for the 'master' BEFSR81 vs).

  (3) save changes

  4) activate wireless, configure security, get access, etc. on the WRT54GS code

  (5) save changes

  (6) re - connect the PC to the original port BEFSR81

  (7) connect the ethernet on BEFSR81 port to a port ethernet on the WRT54GS (NOT the Internet port)

  (8) to enter the code in the WiFi device and make the connection...

• CANNOT ACCESS VISTA BY XP AND CANNOT ACCESS XP SINCE VISTA WITHIN THE SAME NETWORK MACHINE

  I'm using vista Business. while I try to view other machines with the same working group in the same network... My machine only manifests itself in the network... No, other machines are available... and will have remote desktop also does not work if I have an address user name and password and IP address of the remote computer running xp...  Help me.

  Hi NIRAJ KARKI,.

  You can't use Remote Desktop connection to connect to remote computers running Windows XP.

  This package contains the Link Layer Topology Discovery () LLTD Responder. The network map on a computer running Windows Vista presents a graphical view of the computers and devices on your network and how they are connected using the LLTD protocol. The LLTD Responder must be installed on a computer that is running Windows XP before it can be detected and appear on the network map. After you install this item, you may have to restart your computer.

  I suggest to install Layer Topology Discovery LLTD Responder (KB922120) (Link) and check if the problem is resolved.

  Link Layer Topology Discovery (LLTD) responder (KB922120)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481e-BA11-37F485FA34EA&displaylang=en

  You can check the link below.

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Dell support can make the diagnosis online on my computer damage water connected to the same network as the one I use now?

  HI: My Office has undergone a lot of overhead sprinklers water damage in my condo fire. I ordered a new power and it fuels the system very well, but I have no video and tried the video card of the computer another and it does not work. I can connect my alienware aurora to the same network with the computer that I use now. The warranty has expired. Any suggestions on my case? Thank you

  Our online diagnostics will not go to the bottom, you need. You must take the system at a local store. Must disassemble and examine most of its components in another system to try to dismiss what is defective or not. If all the components work in the other system, the CPU or the motherboard is faulty.

• Two tacas server on the same network

  Hi all

  Is it possible to have 2 radius server on the same network, if the first authentication server fails,

  Then, the other will be the auth?

  Thank you

  Of course, is. Simply configure your network devices to switch to the alternate server if the first is not available.

• I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

  I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

  I couldn't see the server on the network and

  also I could not access the workstation to the server.

  not more than one device must perform NAT

  Hi Bruce,.

  Given that you are working on Windows server 2008 R2, please post your question here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows 8 and Windows RT can't find/see each other on the same network

  My problem is very simple, but I can't for the life of understand me.

  I have a Windows 8 PC and a tablet of Surface RT, they are both connected to the same network but I can't connect to the home group. I am not able to see computers, when I click on networks so connected devices.

  When I disable the security of password of my router, everything seems to work properly. I don't want to leave my network available to everyone however. so as soon as I put a password on my router now I can't pick up devices and home group. I tried to change my network advanced setting but who just so used to work. I don't know what there is to do.

  This is for both of my devices, I don't want to leave my router without protection. Is there a way to fix this?

  I think I found the answer to the problem. I went to HomeGroup settings on my PC and on my Surface and I checked everything on making default setting the private setting may be available on the network.

  After that, I went to make sure that the firewall on my computer has been set to its default value. Then I went to check my firewall antivirus (BitDefender) and noticed that the network was listed in public, that's why I could not pick up other computers.

  So I checked the network in order to be under this judgment in Bitdefender and everything seems to work now. My surface to pick up the computer and the home group.

  Check your anti-virus firewall settings, perhaps that is the reason.

• create new homegroup n on the same network

  I recently moved in with a family who had set up a homegroup on a network. I'm on the same network, but I want to create a homegroup for myself. When I click on the link in the residential group, the only option I get is to join the current residential group, which has already been put in place. I've read elsewhere, if you change the public network, go to advanced settings, then change back to the home network, it will give you the ability to create a homegroup. But it did not work for me. He immediately returned to a home group with the only option to join. How to set up a second group of residential on the same network?

  Hi Shiv,

  Unfortunately, this is not possible. We cannot create more than one homegroup on the same network.

  Hope it will be useful.