the Air iPad does not connect to a printer to air even if the two are on the same network

Similar Questions

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• iPad does not connect to the Wifi on the range 192.168.0. *.

  I have an iPad Mini (ME860BA) on os 9.3.1 that would not connect to my wifi at home.  He began to abandon their studies repeatedly a few months before and then just wouldn't connect at all.  It is on the os 9.3 so I upgraded to 9.3.1 but it did not help.  I was able to connect using a hotspot from my phone but no go on the real wifi. Sometimes it seems impossible to connect and others it seems to connect but without the wifi icon that appear (and internet access). All other devices connect to the House without exception (or question) - it's just my iPad.

  I followed every bit of advice I've found - turning wifi off & on, forgetting network, reset all the network settings, hard reboot, reboot normal, turning airplane mode turn off again, go up the brightness of the screen (odd) and finally I restored my router and the iPad to factory settings.  Nothing worked, so I took him to a store of Apple and waiting for the genius to see me I thought I would try to connect to the wifi and it went all right!  I felt a little silly to start with but they still took a look and said that he had 'something' bad, but they didn't know what.  Their best guess was that it was something to do with password authentication because they are client wifi has no password.  I returned home and disabled the security mode of the router - I have a Virgin Superhub running the 2.4 and 5 GHz primary wireless networks - no amount of adjusting the security modes (remove the password, make visible SSID, change of Protocol) makes all the difference.  However, knowing that it worked on wifi from Apple in the store, I was really puzzled.

  After ages bother with different parameters (especially in my router), I now know why it does not connect to home... My Virgin router to short on a range of address DHCP IP of 192.168. 0. * and my iPad suddenly won't connect unless the beach is 192.168. 1. * or higher.  (It connected OK for 2 years).  It took weeks to find this out, but at least now I can connect.  I turned on the wifi of comments because it uses the gamme.1.  Everything is good, connects the first time, every time!  I have not tried establishing a password (I was so happy, it connected I left because it was... well as I switch on the MAC filtering, for a little extra protection) I could try side password later and if it still connect, I'll update my post.

  My solution is very well when I'm at home but is not going to help if I get the iPad with me - it will be hit & miss if I can get the WiFi also.  Must be set correctly - I see no that it is hardware related, so there must be a bug in the software/firmware.

  Anyone having problems connecting to wifi can try the workaround network comments - at least it will get you.

  Is there a future fix for this?

  Re: iPad wifi suddenly does not save

  Change the range on the router you want to connect to.

• iPad does not connect to the server

  Kind of, it looks like my iPad has disappeared and twisted his tail (connection) and got lost somewhere in cyberspace.

  Yesterday morning he opens to the screen Hello > Slide Set up who brought up the screen 'could not activate iPad' with the message "your iPad could not be activated because the activation server is not reachable. Try to connect the iPad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple Support at apple.com/support".

  This condition actually began three days when it does not connect to my Airport wireless internet and I could not he deleted.  I made the troubleshooting on the dome using Airport utility that showed connections to the top and the green. My main computer is not affected. I was able to put a return by making a total system power off for a few minutes and then turned on one at a time with the modem (cable) beginning (all equipment - computers, iPad, modem and airport), then the airport, my main computer (2003 iMac screen all-in-one flat) then the dome of the iMac. They are all restored correctly at full speed. At the point where I was interested only in the dome as I was doing some work on it using Classic applications and did not activate the iPad until the most late in the evening.

  I was wondering what is happening and if there is an inexpensive way to get it running again?

  Sparkgapper

  p.s. There is an Apple Store here in El Paso, if it's a long drive where I live.

  If you have problems with the applications of stalling or crashing,

  double click on the "home" button

  -slide up on applications to force leave their

  Re-boot ipad.

  Press on and press and hold the sleep/wake button until a Red slider appears, and then drag the slider. Press and hold the sleep/wake button until the Apple logo appears.

  https://support.Apple.com/en-us/HT201559

  Force power down if above give it trouble you.

  At the same time hold the sleep/wake button and the Home button. Ten seconds or more.  Keep until the Apple logo appears.

  more information on the re-start:

  http://iPad.about.com/od/iPad_Guide/SS/how-to-reboot-your-iPad-power-off.htm

  This these tips from MichelPM to improve performance:

  https://discussions.Apple.com/message/29504169#29504169

  https://discussions.Apple.com/message/29504311#29504311

  Restore factory settings by loading the latest version of the ios that will support your machine:

  (1) make a full backup of your device if necessary.  Is two times better - cloud and computer.

  https://support.Apple.com/en-us/HT203977

  (2) three methods of restoration of your ipad.  [simple as abc]

  2.a) "you can use iTunes to restore your iPhone, iPad or iPod touch to factory settings and the latest version of iOS."

  http://support.Apple.com/kb/HT1414?viewlocale=en_US & local = en_US

  2.b) be a little more insistent: "you can put your device iOS in recovery mode, then restore it via iTunes.:

  http://support.Apple.com/en-us/HT201263

  3.c) as a last resort, you might consider DFU (Device Firmware Update).  This could void your warranty.

  http://www.IMore.com/Tip-put-iPhone-iPad-DFU-mode

• iPhone and iPad does not connect to internet

  Hello

  Since yesterday, I was unable to connect to internet via wifi on my iPad and iPhone.  They show the power of the full signal and says I'm connected, but won't load Web pages or refresh applications.  When I disable wifi on my phone everything works fine on the LTE, but I don't want to use my data.

  I think it must be something with the update iOS because:

  -J' completely rebooted our router and modem and it worked on my iPad for about 30 seconds (what makes a Web page) before it stopped working again.

  -My boyfriend did not the last update on the iPad or iPhone, and both connect on our wifi at home, while my iPad or iPhone will connect to the internet.

  -My iPhone also does not connect to the wifi in my work, even though I know it works as I am online on my computer work via wifi.

  I noticed something strange on my iPhone and iPad when I went to check the settings wifi yesterday - the VPN configuration is flashing/refreshing without touching me, even if I don't have everything set up VPN connections.  When I actually click on VPN, an error is displayed.  There may be something wrong with the VPN on the new update which blocks the wifi signal?

  
  

  I really appreciate your help!
  

  If you are able to connect your iPad and iPhone to your wireless router agreement but the iPad and iPhone will not connect to internet, it is unlikely to have anything to do with the version of iOS.

  Try this:

  Restart your router (unplug unit, wait ten seconds and then reconnect it).

  Wait for the router shows all lights normal and connected.

  Now, reboot your iPad or iPhone

• My daughter's iPad does not connect to my network, although mine don't?

  What to do when the ipad to my daughter does not connect to my network?

  You talk about your Wi - Fi network? If a single iPad of your daughter does not connect while other devices are working properly, the first thing to do is to reset the Wi - Fi router. Powering the devices iOS and computers connected to your wireless network. Then turn off the router. Wait 30 seconds and turn on the router. After it finishes its startup routine and shows a good access to the Tower of the internet on your iPad, etc..

• iPhoto does not connect to buy prints

  IPhoto does not connect to the server in order to buy prints and maps.  Is there a solution for this?

  There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

  -What version of iPhoto.

  -What version of the operating system.

  -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

  -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

  -Have what measures you already tried to solve the problem.

  -Something unusual on configure your? Or how you use iPhoto?

  Anything else you can think of that could help someone understand the problem you have.

• Why my computer does not connect to my printer (HP Photosmart 7520) wireless?

  Since obtaining the printer, my laptop has always been able to send documents to the printer with absolutely no problem. As far as I know, it works because the printer is connected to the same network as my computer wireless.

  However, none of my colleagues are able to print, in spite of being connected to the same network.

  Is there something to do? Much of the time, the printer is not even appear on their drop down box (when trying to print in microsoft word for example), but he always does on mine, and we are all on the same wireless network.

  Any ideas?

  For issues with Mac that I suggest you post in the forum Mac printing and scanning here.  Do not forget to mention the model of the printer, and also which version of Mac OS X, users have.

  For Max OS 10.6 to 10.9 drivers are available on the site of HP here.

• HP 6700: My iMac does not connect to my printer

  Hello

  My iMac and HP software are updated.

  The two devices are connected to my network.

  My iMac shows two icons of the printer: the HP6700, which shows the driver 2.0 and "printer", which seems generic and contains the driver 4.2, I think.

  My printer and modem are located one floor above my iMac.

  My modem/router is brand new.

  I restarted my iMac and printer, reinstalled the software for my iMac and printer and removed and added two printers, according to the instructions online Apple and HP.

  Yet, my iMac indicates that both printers are 'inaccessible '.   Apple provides no guests or additional information to make a printer "accessible".

  Please help me!  For the last 3 days, I tried printing from my iMac documents.

  Thank you in advance.

  Hi @IH8Computers1,

  Welcome to the Forums of HP Support!

  I see that your HP Officejet 6700 printer will not communicate with your Mac. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you are experiencing. Looks like you might be the network of evil on the Mac or the problems with the print driver.

  Please check that your printer and computer are on the same network.

  Make sure the computer and the IP address of the printer:

  It starts with 192.168.2.XXX or 10.0.2.XXX?

  • If the computer has a different IP address, such as 192.168.1.XXX. This means that the computer and the printer are on different networks.
  • Check the SSID (network name).

  If so, please proceed as follows:

  • Restore the default settings of network on the printer.
  • Run the configuration wizard wireless for reconnected to the network.
  • If you have access to a computer running 8.1 Windows or an earlier version, click here to update the firmware of the printer.

  TIPS:

  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, follow the steps in this guide:

  • HP printers - "Printer offline" or "printer does not" Message (OS X).

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• My system does not connect to my printer.

  He always tells me that my computer is not communicating with my printer, but whenever I check the page enable bidirectional support and click on apply when I go back in it fired. Ugh

  every time I try to print it says that my computer does not communicate with my printer. to check the box to enable two-way communication. I do that and then he shoots it whenever I click on apply why?

  Hello.

  1. What is the brand and model of the printer?

  2 is that the printer is shared on the network?

  3. What is the exact error message?

  Follow the steps and check if help.
  Method 1: Solve printer problems
  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

  Method 2: Follow the link for the misprints

  http://support.Microsoft.com/GP/printing_problems

  Method 3: Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Add this and let know them that it applies to Windows 7.

  http://support.Microsoft.com/kb/823299

  Note: Re enable the antivirus software after testing the issue.

• iPad does not connect to the Macbook

  Hello guys, please, help me

  So, I wanted to add the iTunes music on Macbook Air to iPad mini2

  I connected with the lightning for Macbook iPad and it shows me, that he is in charge, BUT in 1 SEC is disappears. That the load again, that disconnected

  It continues until I disconnected iPad Mac

  When I reload decision-making power-everything is good

  When I reload iPhone with THIS cable-all is good

  Please, I need help

  Thank you

  Have you tried to plug the USB cable into another USB port on your macbook air? If it still does not respond, try to restart your iPad Mini and the Macbook Air, let me know if that solves the problem.

• iPad does not connect due to an invalid response?

  I just updated my iPad air to 10.0.2 and received this:

  ITunes could not connect to the ipad "iPad", because an invalid response was received from the device.  Aide said it's a problem of USB, it's using the same exact cable I was using all night with her, and I even tried 2 other new cables with the same result.  Rebooted computer and iPad, the same thing.  It was working fine until I upgraded to, but I have updated to ios 8.4 directly to 10.0.2 and I really want to go back if possible.

  Thank you all in advance...

  Hello. You need iTunes 12.5.1 to support iOS 10.

• HP Officejet 6700 Premium: IHP AIO Remote app does not connect to my printer.

  Tried to use HP AIO remote with my printer HP officejets 6700 Premium. I get a message that is offline. However, it is not. I tried to turn my printer market and restarted my computer. It did not work. I noticed that the

  the IP address for my printer HP officejets 6700 Premium on the app is not the same as the address of my printer. If this is the problem how can I fix it? In any case, please help. I use a Dell with Windpws 10 laptop

  Wally

  Hello @wwwally, greetings!

  Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

  Going through your post, application remote control HP AIO is mainly used in mobile devices and not in laptops.

  I suggest you download and use HP Scan and capture app to scan from your laptop Win 10. You can go to http://hp.care/2bUVkrw to download and install HP Scan and capture the app.

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• Air iPad does not connect to wifi. Network settings reset did not help. Unable to connect to the internet to do the software update.

  I can't connect my wifi iPad air. I tried;

  Reboot & force restart

  Reset network settings

  Connect the iPad to my Mac.

  I can't do a software update to 9.3.2 (without wifi). Seen on another thread to remove this update under settings > storage management. Tried, did not help. When I try to check the updates, I get this message "an error occurred while checking for a software update".

  Something is blocking your access to the update from Apple servers. Update iOS has never worked in this place before? Have you tried to use iTunes to update to iOS?

• Since the last 'upgrade' my iPad does not connect to my Bluetooth from Sony speakers.  I restarted everything.  I have not matched the speaker, and then paired again, nothing. The iPad said they are connected, but not sound and the machine keeps spinning.

  My iPad mini links is no longer in my Bluetooth from Sony speakers since the last 'upgrade' to iOS.  I rebooted the iPad.  I unpaired and repair the speakers.  Showes Bluetooth as connected but the train continues spinning saying: it is always looking for devices even though it says it has paired with speakers.   Any suggestions?  and Yes, the volume is rising.

  Tap settings > general > reset > reset all settings and restart your iPad then re "pair" speakers.