2 questions about uninstalling and reinstalling directx 9 or 10 and updated updated chipset

Similar Questions

• Question about settings and update

  I was wondering if all the settings on the phone must be enabled or disabled for the update, or if any of the preloaded, self downloadng apps need to be updated? I do not use WiFi or gps to the location and the other are the two people with reduced mobility. Otherwise everything is stock with no third party apps installed apart from those mentioned above. Not all those who are updated, this video of Verizon and Google Voice Search. If there's anyone who needs or settings need to be changed, any help would be appreciated. Thank you!

  There should not be any settings that you need to change, as long as you have a data connection when it is sent, you will receive the update.

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• Question about business and Service of Proxy

  Hi friends,
  I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

  If your question is only about the performance analysis,
  try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
  For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

  See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

• Windows 7 starts questions about mac and office 2010 following an installation

  It's a long cut as short as vent. I've been miss sold a record of upgrade of windows 8 full disk-shaped, with norton and office 2010. My goal of creating windows on my mac for a course I'm taking. After that know I need windows 7, I bought it online. I created a partition of 80g on my mac charge windows 7, then norton. Until I loaded the office that I was invited to perform the update from apple in the windows software 7. Note before I installed norton, I load boot camp mac utilities according to the instructions. So, followed by all as should be. The prompt update from apple was quick time, iTunes and airport, I checked all and then updated. Then I loaded office 2010 and obtained throughout the process from the Microsoft site. On the last part of the installation, the installation failed due to a mistake of hanging iTunes. I tried again and again, I fixed the update to iTunes to add and remove the section of windows. Then, I got different errors. I decided to remove the whole score without uninstalling all programs again. When I get to the windows live, that this falls priming. I get various error messages whenever I try to start the process. As a header of Bank pool, fatal error and so on. Can anyone help? What is the damage?

  Hello

  Thanks for posting your query in Microsoft Community.

  Because the question is limited to Windows 7 on your Mac with Boot Camp, I suggest you contact Apple Boot Camp support for assistance.

  http://www.Apple.com/support/Bootcamp/

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• Question about snapshots and virtual machines

  Hi all

  I have a small question about snapshots. I use VMware for about 6 months and I read about snapshots and how they work but still have a question to make sure that I understand how it works and it will work the way I think it works.

  I have a Windows 2003 server, which is a virtual machine. I have an application that uses MSDE database. I want to upgrade the database to MS SQL 2005, but to do this I need to back up the MSDE database, uninstall MSDE, and then install SQL 2005 and move the SQL database. This happens on the same VM.

  What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good? One of the main reasons I moved the server VM was because of this upgrade.

  After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

  Thanks for your help.

  Hello.

  What I was thinking if I well Snapshots correctly is to snap turned the virtual machine before doing anything. Then do my upgrade steps and see if everything works. If its all messed up so I should be able to return to my shot and everything should be the way he had. What is the good?

  That is right.

  After reading the documentation for the snapshots, it's how I undestood it. Pretty much any change could be reversed with snapshots. I wish just they had put in a few examples in the PDF file. Also it would be the same for all type of grades of the OS? Could I snapshot a Windows 2000 Server, and then "in the upgrade of the square" to Windows 2003? I've cloned a VM to do this but was curious about whether snapshots would be just as easy.

  Exactly the same thing for the upgrades of the OS.

  Perhaps the most important thing with the snapshots is to keep an eye on them and don't let them sit too long or become too big.  You have described the use cases are very good uses for snapshots.  Just make sure you have a solid plan with a schedule set, so that you can come back or validate changes before the snapshot becomes too large.

  Good luck!

• Question about CR and LF

  Hey guys,.

  Quick question on LF and CR. As you can see I'm LF and CR of writing to a text file and because directly.

  

  However, I don't get the CR at the time where I read it. Why is this? Is it because Windows ignores the CR?

  Thank you

  Hi dora,

  read the Help for the WriteText function.

  There is an option for handling of CR/LF characters and explained mentioned in the "Advanced" section of the article for help!

• Question about recompose and printers

  We test a deployment View 4.5. I've been recomposing desktops once a month or so to refresh after update of the base VM with Windows updates, etc. Users to install their own network printers they use in their jobs - we do not install automatically printers based on location or IP address or anything. I just found out/realized today that when I do that, the printer drivers for the printers installed user disappear, what makes the printer does not. In this case, printers are Canon ir {xxx} copiers/printers. The user can enter the Printers folder and update the driver for the re - download, but this won't work for a real-world deployment. I wonder what others do for this, or what I can do for that pilots don't is wiped with a redial. I thought I put the drivers for all of the different printers, we would eventually use in the base desktop VM, but I don't know if this is the answer. If this is the way to go, I can do it, I just want to check before take time to load all the different drivers.

  Thank you!

  The installation of the driver is on the operating system drive. So if the new image doesnot contain the same pilot system will lose the configuration, and it is expected. Only one sytem identities and user profile and data is possible to retain all maintenance operations (redial/Rebalance etc..)

  Also please note that view does not keep the profile 'all '.

• Question about orders and the inputs of the element of the API

  Hello
  
  Pay_element_entry_api allows us to update the values of the clip. Similarly, we have pay_batch_element_entry_api through which we create master batch and lot lines and update the entries in the element. Can someone explain what is the difference between these 2 types of methods?
  
  Thank you
  
  KK

  The second method gives you more control: the user can decide when to download the Scriptures, chenge their values, validate before the transfer, handle exceptions and so on.

  One requires less work: the entries are created immediately without user intervention.

  It depends on the business process.

• Question about ESXi and NFS

  Greetings!  I'm hoping to get feedback on the following possible scenerio.

  Computer 1:

  The computer that is running Windows Server 2008.  Large amount of storage available, via dedicated hardware raid or 'software' / raid ICH10.

  Computer 2:

  Computer running ESXi v4 (installed on the local hard drive).  Core2Quad w / 8 GB RAM.  Responsible for about 4-5 virtual machines.  Each virtual computer will be low IO load (DCs environment lab, MySQL server, web server).

  I have three questions:

  1. are there any problems with the use of the space on 1 computer through Windows 2008 NFS to host virtual machines that will run on computer 2.

  2. because I do not use hardware RAID on computer 2, I won't RAID1 for redundancy.  If the hard drive fails, but virtual machines are on a redundant protected NFS share on Computer1, is there loss of data outside the need to reinstall ESXi on a new hard drive?

  3. someone can tell the performance of a 'software' RAID (probably RAID5) NFS share (ICH10, etc.) from the point of view of virtual machines hosting?

  Thanks in advance!

  1. are there any problems with the use of the space on 1 computer through Windows 2008 NFS to host virtual machines that will run on computer 2.

  Although the NFS Windows service is not the most ideal, it will work fine. You want to make sure there is no automated etc. updates and limited storage functions of the machine.

  2. because I do not use hardware RAID on computer 2, I won't RAID1 for redundancy.  If the hard drive fails, but virtual machines are on a redundant protected NFS share on Computer1, is there loss of data outside the need to reinstall ESXi on a new hard drive?

  It would not be otherwise than a hardware failure on any machine. You don't have the risk of data damage whether physical or virtual.

  3. someone can tell the performance of a 'software' RAID (probably RAID5) NFS share (ICH10, etc.) from the point of view of virtual machines hosting?

  Without hardware raid with a caching controller you won't have better disk performance. Controllers setting cached on RAM and will require a battery to protect the cache failure.

• M30-832: Questions about memory and DVD player

  Hi all, new to laptops up to have a few questions! First of all, I have a Satellite M30-832.
  1. He has on the dvd player on the side of the Compact disk with re-writable below image and sign dvd R/RW under. That means it is a DVD burner as well? It does not sem to recognize blank DVDs and I was under the impression that it should be possible to write about them!

  2. can I upgrade the memory with memory DDR - RAM modules or does take a special type? And how to change them!

  Thank you very much

  Hi Richard,

  From what I can find your M30 832 is equipped with a DVD burner so you should be able to burn DVDs (the specification says you can only burn at X 1 speed for DVDs).

  You should be able to update your RAM to a maximum of 2 GB and I recommend you buy a quality mark to avoid any problems. Your user manual should have details on how to change the RAM modules, but generally it will be to remove a panel of access (usually on the bottom of the unit) and then releasing it two clips (one on each side of the RAM modules) plastic spring-loaded and gently raising the output modules.

  Please make sure that you either wear a wristband anti-statuc dirt or this earth you yourself before accessing RAM modules. They are very sensitive to electrostatic.

  You can find suppliers of RAM suitable if you GOOGLE 'M30 832 RAM.

  HTH)

• Question about phone and / or Android 1.5

  I have a question or a statement that needs confirmation. If someone could be good enough to help out I'd appreciate it.

  I am a heavy Texter and text on a daily basis, probably an average of about 250 + texts per day. Also, I noticed and I took County, after about 4 hours of texting the android keyboard and also the swype keyboard, affecting the time key to key response starts to slow down and get slow and ultimitely is unbearable to the text with. Even with the home screen and sliding screens from left to right, and as I said it doesn't happen only after some hours of use of the phone. So, I have to restart the phone and repeat for it keep to become lazy and unbearable to text with. I usually reset every morning or when I wake up. This is nothing compared to my sisters Mytouch, which is in fact older than my phone, it can affect his day at the time and not get done with the delayed touch response. I also noticed that his phone is running Android 1.6.

  Now my concern is, if I'm the only one knows this or is it due to a defective phone. What is the Android obsolete 1.5 that many people are talking about who is performing on the phone in this way.

  Basically, it's because of 3 things.

  1. history - more history, more than it takes to load. (If you wipe all messages and try again, you'll see what I mean)

  2 android 1.5 - don't know what the reason, but even on 1.6 devices SMS language delay is AVERAGE less.

  3 Swype - if you have enabled, it tends trolling more than the default android.

  It is not your phone, it's all phones Cliq/Cliq XT... 1.5 hate text messaging.

  In addition, your phone will work more effectively without a task manager. They are nice to have if you need something CF or to extend the life of the battery (no), it actually takes your phone like some processes that would otherwise, and you also have the risk of frost on the phone all together because some group programs are essential and cause the home screen all recharged after their closure. I would like to refer to this site in order to better explain.

  http://tiny.cc/00s5a

• Question about uninstalling

  As a general rule, it is best to use the app or program uninstall, or use the Add/Remove Windown utility?

  Good question. I usually turn to the programs built in uninstaller and cleanup utility if it is available as my first choice and if is not knitting, then next choice is add it / remove utility and depending on how stubborn the remaining files are, I turn to Revo Uninstaller for his ability to find and remove the remaining files and registry entries.

• Question about Java and other concerns

  It was in the original thread Java, decided that it should be easier in the separate thread.

  A simple uninstall will get rid of Java, or leftovers to stick around. After picking up the Live safety scanner fake Trojan or whatever it is, I did some scans online in addition to MMFA, who got rid of him in a quick scan and SAS, and Windows Defender. You don't know if AntiVir would be cleaned, but MBAM it in the short term. Thought I was clicking on a secure link, but I learned enough here to start in Safe Mode, run MBAM, and WD of Tower and Windows Security Center and return to normal. Somewhere along the line, I received a few Java mentioned error messages. Think that I tried to download ot and run an online scan, but can't remember for sure.

  Moreover, somewhere I took advice of Prime Minister, which seems to be a malicious ad-ware and pest stealing information data. I deleted the program. It does not appear on all analysis, but there is an entry in WinPatrol in Services, where it shows up as being disabled. He also appears in the Services in Task Manager, where it shows stopped. Don't know what I can do to get rid of it completely or if it anything wrong at this point, if it is disabled.

  Dale,

  even if java uninstaller leaves behind some errant registry entries, I don't know that it's worth trying to go after them.   [For example, I found a Web page since java itself which talks about how to change the registry in case"Java icon is still visible in the Panel hasthat almost have Java is uninstalled".   [I have purposely not cited this link here, because I don't recommend editing the registry and don't want to be responsible for all the problems if they try to do.]

  ---------------------------------------------------------------------------------------------------------

  "I've learned enough here to start in Safe Mode, run MBAM, and...". »

  Note that MBAM is designed to run in NORMAL mode, in order to be able to find and conquer the malware that is resident / operation of the system RAM.   (By starting in safe mode, this malicious program does not work often and if MBAM won't find it in memory).   In fact, the only time where we should try to launch WHAT MBAM in safe mode is when he is unable to run in normal mode.   And now, with MBAM Chameleon, it is even less likely that MBAM will be prevented from running normally.

  In this sense, MBAM takes a very different from other security programs philosophy, that often MAKE application users run in safe mode.

  And as you have seen, MBAM focuses on 'rogue' malware that other products do not detect or do not remove properly.   For a person to "do-it-yourself", it should be the first scanner that you run when it encounters a thief.   [Of course, to "do it yourself", you can only exacerbate existing problems... so you must proceed with caution.]

  -----------------------------------------------------------------------------------------------------------

  Somewhere along the line, I received a few Java mentioned error messages.

  Was it a message 'error', that Java was "defective"?   Or was it just a notice that you visited a java requiring site, which he could not find (active) on your system?

  -------------------------------------------------------------------------------------------------------------

  Regarding the Premier's Opinion, I would be concerned that "it also appears in the Services in Manager tasks, where it shows stopped.   [I am less concerned with what appears as 'disabled' in respect of the services of WinPatrol, as sometimes, after deleting a program or a service, it may still appear as a service disabled in WinPatrol.   But in this case, WinPatrol should indicate that the (local) file is not found.]

  But as I am not familiar with this particular program, you can either wait Bugbatter you answer here, to see what she suggests... or if you're in a hurry, you can follow the instructions at http://www.spywareinfoforum.com/index.php?showtopic=79038 to sign up and post the logs requested to SpywareInfoForum.com; There are experts here AIDS that can 'walk you through' procedures to analyze your system and clean the infection.   Any help provided that it is FREE.   If you decide to go to help them, please wait for a response, and do NOT attempt to perform any other scans to remove yourself – do exactly as they ask you to do, no more, no less.  

   

• question about SQL and VMDK places

  Hello world. Im kinda new here so please be gentle

  I'm confused on the locations of the files for sql.

  At this moment I have 1 with 3 vmdk files sql server executes a muscular 100 GB sql database.

  My disks are as follows

  1 OPERATING SYSTEM

  2 DB

  3 newspapers

  They are all thick and they are all stored with the virtual machine in the virtual machine configuration.

  It lies in a cluster HA/DRS and we use them both.

  The question boils down to performance.

  If my VM is stored on DATASTORE_A and the VM folder on this data store has all the VMDK files in it, it would be safe to say that they are all on the same disk as much as vsphere is concerned.

  Now to get best performance, I want to separate my VMDK files to separate data (with faster operation) warehouses to avoid conflicts of drive on my current data store. What is the right way to go about this?

  How separate you your VMDK to other data warehouses, and enjoy other performance data store? WE do not use DTS at all so im sure it although we use HA/DRS in our group... and yet, I don't think that it is important in this case... just more of an FYI.

  What do you do to get your SQL servers to run in vmware?

  Seems like a basic question.

  The answer seems easy. Separate disks so that they do not fight.

  'S virtually done it with VMDK but the data store underlying is 1 speed and they all exist on this subject, so... How to separate them at that level for best performance?

  Also... once I keep them separated, how can I keep my sanity by knowing my VMDK are not with the virtual machine? This kind of made a mess . Of course the performance takes a front seat for my mental health.

  Thank you all

  1. If I sVmotion my other vmdk files via the advanced options of one in another data store, it will create the files folder structure based on my VM name and place the vmdk inside?  (I guess I could just test it and see).

  Yes, the VM configuration file (.) VMX) will be modified to point to the new location of the virtual disk. You can use the virtual machine property editor to check for this, once the Storage vMotion.

  2. with regard to the disk controller, I assume you mean a virtual controller by VMDK in the vmx / correct the settings of the virtual machine and not a phyical on the hardware controller? (IM pretty sure I know the answer here but I just want to be clear).

  Yes, the virtual controller is correct.

  If so, what type of controller? LSI Logic or it would benefit all a paravirtual adapter?

  As long as your operating system is supported, go with the PVSCSI every time - especially for newspapers and the controller file data.