2 SmartBand does not connect to new phone
I had a SmartBand 2 for the new year, that it was connected to my old Sony Xperia z3, but I had to have a new because I broke the screen and now I can't seem to connect to the new phone. I tried all the troubleshooting but to no avail. However, I have noticed that I don't get the blue light flashing on the Strip. Any ideas?
You need to reset the tape first. Turn the power off, then press the new button and more until you feel a longer vibration. It will enter into pairing mode.
Tags: Sony Smart
Similar Questions
-
laptop older does not connect to new router
Hello
I have a laptop Compaq Presario A940NR which is several years old. Until last week, it was connected through a router. The router has stopped working on all devices (printer, 2 other laptops). Replaced with a Netgear N150 router. -connected to a desktop computer, wireless to the printer and 2 new laptops. Most old laptop listed above does not connect to the network. I tried (wired) connection directly to the ISP modem via ethernet. He does not even recognize this connection. I may need a driver updated, but unable to connect to the internet on the laptop.
Help! and thank you,
Hi, Darlene:
Here are more recent (MARCH 2011) a version of the driver for your Atheros wireless card. I suggest you use it since you have a new router. There was a lot of connection problems with your Atheros card and new Linksys E series routers, for example.
Paul
-
Bluetooth does not connect to the phone Moto G
Bluetooth not connect to the phone of MotoGP
How can I get there?
Original title: bluetooth does not connect
Hello
Please contact Microsoft Community.
I understand that you are unable to connect to the Bluetooth.
I will definitely help you with this.
- Do you receive an error message when connecting?
- Are you computer connection to phone with Bluetooth or other device?
I suggest you go through the below methods:
Method 1: Run the hardware troubleshooter, and check if the Bluetooth works.
Open the troubleshooter of material and devices by hitting on any fly in the right edge of the screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), recording equipment and devices in the search box, type by clicking on settings and then by typing or clicking on find and fix problems with the devices. You may be prompted for an administrator password or to confirm your choice.
Method 2: activate Bluetooth Support Service.
Follow these steps and check if the Bluetooth support Service is started.
(a) press the Windows key + R, type services.msc and press ENTER.
(b) make a right click on the service named Bluetooth Support Service.
(c) check if it is started, otherwise click Start.
Download and install the latest Bluetooth drivers on the manufacturer's Web site.
Method 3: To add a Bluetooth device, see the following steps:
Once you have verified that a Bluetooth adapter is installed on your computer and the device that you want to connect with can be discovered, you can add more than compatible Bluetooth devices to your computer. Here's how:
1. press the Windows key, it will appear on the start screen, tap Add a device, click settings, click Add a Bluetooth device
2. click on the compatible Bluetooth device, you want to add to your computer, and then click Next. If you do not see the device you want to add, make sure that the device is turned on and discoverable. If you turned right on the device, it may take Windows several seconds to detect.
Windows might ask you to enter a pairing code (sometimes called a PIN or pass). Most Bluetooth enabled devices had to be paired with your computer before that they can exchange information between them. To do this, they must exchange protected pairing codes. This means that only wireless devices, you authorize can connect with your computer.
See also the link below:
https://support.Microsoft.com/en-us/help/15290/Windows-connect-Bluetooth-device
I hope this helps. Please post back with the State of the question and we will be happy to help you further.
-
2 Smartband does not connect after the software update
Hello
So I upgraded my Xperia Z5 yesterday and now my Smartband connects.
I've seen some other posts on this topic and I've tried everything mentioned there, but it still does not work.
I tried to activate my Bluetooth and NFC and turn it on again and the phone as well.
I force arrested two apps smartband and erased their data and cache.
It will not pick up my smartband Bluetooth that is so impossible to connect in this way.
Smartband is fully charged and I tried to turn that off and on again as well.
So I don't really know what else to try?
Have you also tried to reset the tape? It contributes generally to:
http://support.sonymobile.com/global-en/smartband2ios/Userguide/resetting/
-
WRT54GL does not connect the new cable Modem
Hello, I hope someone can help me. I just changed internet providers and my router does not work with the new modem they proived. I had been with ATT and has configured the modem/router ATT to act as a pass through my WRT54GL. Now, when I connect my new modem (which is also a wireless router) to the WRT54GL, I get no connection on the Linksys. However, if I plug in my modem att, resume service (I've not turned my old Internet again until I get this resolved). I tell myself that some setting prevents the WRT54GL to connect but not sure how to determine who it is: I'm not very well informed in this area and only followed a guide online when I configured the router to worek with ATT modem. I'm hoping to avoid resetting the WRT54GL to the deault factory because my old model Roku connects and I cannot change the network, it connects to due to losing the physical remote control. If anyone has any suggestions or can help me trouble shoot, I would really appreciate it!
HI idkidd,
You can disable the Wi - Fi modem to avoid any conflict on your Linksys router. And for the WRT54GL work with the new modem, you must reconfigure. The router might still be trying to remember the previous modem settings.
Try these steps:
* Connect the computer directly to the modem and check the IP address (Windows) (MAC OSX )
Note the IP address
* Now, unplug the modem from the computer
* Connect the computer to the Ethernet/LAN router (leave the disconnected modem) ports
* Determine the IP address of the computer, get the router. Then, compare it to the IP address, you have the modem
* If you get the modem 192.168.1.x and is also the router 192.168.1.x, which means that there is a conflict of IP address
You can use this link on how to set up the router again with the new set up a router with DSL Internet service Linksys modem
I hope that these AIDS!
-
SmartBand does not connect since the android update
Has anyone else had problems connecting to their SmartBand since the update to android 5.0.2? My group is fully charged and I uninstalled then reinstalled smart connect, but I don't always have it connect. Help!
Try the settings then applications then swipe all then find and open Smart connect then press stop Force then wipe data and clear the cache, and then restart and try to connect
-
DeskJet 3520 does not connect to new router
We have a Deskjet 3520 that worked very well with our old clumsy router Belkin. However, we passed just a router ASUS RT-AC66U, and now the printer doesn't seem to be able to communicate with her. We are running Windows 8 on our desktop. Hard, the office is connected to the router via an ethernet cable. How do we get our 3520 in network again?
Hello
Please follow the instructions below to fix:
http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html
Kind regards.
-
BlackBerry Smartphones My Desktop Manager does not connect to the phone
the manager crashes just on the connection. I tried to restart and reinstall the app and nothing helps.
Can someone help me please?
Help us help you... Please provide details. What Mac? OPERATING SYSTEM? What BB?
-
Watch cannot answer incoming calls.
Hello
To answer a call on Apple Watch, press answer. If you would rather press the button firmly, it won't answer the call.
-
Smartband SWR10 not connection with phone after update of Lifelog
After yesterdays updated my smartband does not connect with the phone. No data is transferred and the message inside SmartConnect says "Connect charger" (but I don't know that it is fully charged). Same situation was around a month ago, and it's getting boring. Is it possible to fix it?
OD, double relocation at all connected with smartband and restart helped smartband. I have node know what was the problem, but it is resolved.
-
I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect. It worked fine with the previous modem (a rented one TWC). Help!
Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.
Turn off the new modem for at least 30 minutes. More is better.
Perform a hard reset on the AirPort Extreme, then it turned off.
Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port
After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.
Then, turn on the airport and let it run a few minutes
Set up AirPort Extreme again
Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.
-
MY new iPod does not connect to my 2006 G5 iMac. How can I download my iTunes (music mainly from my own CD) library on my new iPod. My iMac works well, but running an ancient operating system that does not seem to be updated capable?
This is not possible. I don't know what specific iPod model you have, but any new iPod does not work with a Mac running Mac OS X 10.4.11 (and support older version of iTunes).
There are more older models iPod work (you can buy used) and many of them, in my opinion, have GREAT sound quality. To playback audio, new does not mean better.
-
the airport does not connect to the internet new
I moved and now my airport does not connect to my new internet provider. Can anyone suggestion solutions?
Any time you change your provider or hardware networking it is always a good idea to perform a complete recycling of your network equipment power. Please check the following Tip of an airport users for assistance. Post back your results or if you need further assistance.
-
I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?
I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.
My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!
Hello:
If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.
Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.
If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.
Paul
-
Hello
I just installed a new router and now my desktop running xp computer does not connect to the internet. I know that it is not the router because I plugged the cable into my laptop running 7 and it works fine. When I try to dhcp I get 169..., when I put manually the IP just get no access to the internet and can not ping to the router address. I tried to run the net work Assistant, emptied my dns, disabled all firewals, still nothing.Any suggestions?original title: connectivity LimetedThe zero configuration utility works very well. But it is a desktop computer and on cable. All other wired and wireless PC in the office is working well, then it's definitely this PC. He came out of nowhere, I install a network printer on the PC but that's all.
Your messages are a bit terse, but if I understand correctly
- You have a router connected to the Internet and multiple computers connected to the router, some Ethernet cable and others by wireless.
- All but one of these computers can reach successfully from the Internet via the router.
- A computer that can't browse the Internet is connected to the router via an Ethernet cable.
- You disconnected the cable between the router and the desktop problem and connected it to a Windows 7 laptop and the laptop connected to the Internet via the router.
- You haven't seen any error message (except, perhaps, a message on "Limited or no connectivity").
- You have installed Windows XP Service Pack 3 (or at least Service Pack 2)
Assuming that all the foregoing is an accurate summary of the situation, I suggest that you do the following:
Open a command prompt window (start > run > cmd > OK)
Type the following lines and press ENTER after each lineNetsh reset winsock catalog
netsh int ip reset c:\resetlog.txtClose the command prompt window and restart the computer.
Maybe you are looking for
-
virus of Foxfire updater on windows 7, how can it be removed?
I started getting a message to allow the update of Firefox be allowed to circulate. How can I get rid of the files associated with this?
-
The OS is El Capitan 10.11.3 on both my MacBook Mid 2010 2.4 GHz Intel Core 2 Duo 8 GB 1067 MHz DDR & iMac 21.7 end 2012 2.9 GHz Intel Core i5 8 BG 1600 MHz DDR3, connection to the internet with the 5th generation Airport Extreme. The internet connec
-
How to remove system tool without having to pay for anything anyone to remove it?
original title: remover tool system How to remove system tool without having to pay for anything anyone to remove it?
-
Windows Vista after the replacement of the motherboard
I replaced a faulty motherboard on my windows vista machine, now it tells me my copy of windows is not genuine, how can I fix this? Original was an AMD Phenom processor, replace it with a processor Intel i3 and Council. Once the physical exchange o
-
Repressive registry missing or corrupt file.
When I try to start my computer, I get the message below on the registry file. Windows failed to load because the system registry file is missing or corrupt Here is the extended message I receive: 1. Windows could not start. A recent hardware or soft