2 TB LUN and Clarification of the scope

Similar Questions

• COA and Clarification of the ISE

  Can someone clarify exactly what COA (change permission) is?

  From my understanding, ISE can make an initial authentication and using the configured authorization policy but it is not considered COSTS.

  If subsequently a posture or profiling check is performed for this authenticated, authorized session and a new policy applies to this existing session then this would be considered in COST.

  This is why COA is feasible with advanced license because of the posture and profiling.

  Thank you very much.

  Graham

  Hello

  CoA is a feature that allows two-way communication in the radius Protocol. Before the scenario you had when the clients connect to the network, the n intiates a radius authentication session, and then you have received either an accept or reject.

  With this agreement, after you receive reject it or accept. You can now put an end to an existing session, authenticate a user if their session information change and correspond to a different access policy (must as in the example if a customer makes inconsistent to consistent).

  CoA, which is not entirely used for the advanced features of license. There are a few scenarios where cost can be committed, for example, if an administrator removes any end point of the database of the ISE. ISE will then interview the internal session cache to see if there is an active session and then will issue a certificate of authenticity.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• resize the disk/diskgroup LUN and asm

  Happy new year to all.
  
  I have a little problem of resizing an ASM diskgroup and maybe someone here can help me.
  
  I had a lun with size 50G and added on a disk called LUN1D1 asm.
  Then I created a DISKGROUP called data1 Witch (external) contain some LUN1D1.
  Data1 is then conducted asm volume. So I have a volume of asm with size 50G and I need 100 g.
  
  Now, I have increased the size of the lun with 50 G (100G in total). I rescaned the LUN and os see the new size.
  
  The problem is that I can't resize DISKGROUP data1 or disk LUN1D1.
  
  Database of oral 11.2.0.3.0 x 64

  KFOD read the values of the BONE, so something is wrong on the BONE and does not recognize these new values.

  Did you follow the following steps?
  http://www.Novell.com/support/kb/doc.php?id=7009660

• KB 1008130: Failure of VMware ESX and ESXi 3.5 U3 of e/s on the queue (s) SAN LUNs and LUN is blocked indefinitely

  Does anyone have more information about the current alert to support "all of you who have upgraded, or are planning to upgrade worms, ESX 3.5 Update 3 or ESXi 3.5 Update 3, please read the Article 1008130"? ".

  Ko describes possible symptoms and identifies the affected ESX 3.5 U3 version, but the resolution is a bit vague. I understand they are working on a fix but,

  1. Is it related to a specific build of U3?

  2. Are there precautions that we can take to minimize the risk?

  3. What is the scope? My hypothesis is not very because 3.5 U3 has been a while and I know this support alert is recent.

  4. Anyone experence this first hand... at what level... There you said what though it is indicated in the KB?

  I didn't have symptoms on the hosts I've 3.5 U3, but I planned improvements to several hosts this weekend and would like to know if I have to go through the painful process to cancel or reschedule.

  3.5 has the robin load balancing experimental, but who would not count as a path failover (I don't think).

  You can force the LUN through a certain path, it might take a few attempts on Lun busy because the load balancing cannot be changed when an INTERNATIONAL organization is pending (this is how works iCSSI HW).  When you fail switches that nevertheless taken into account as a path failover, so I don't know how that comes in re: this issue when no LUN use this path.

  For more security perhaps you put a hold:

  • DRS

  • SSH logins

  • Backups

  • Restorations

  • Clones

  • on/off switch

  • etc, etc, etc.

  While the path are past failovers.

  If a path fails on a single host, I would be surprised if it affects other hosts.  Guests will book the file on the VMFS file system when they need to update the metadata or write data, I think that should continue its work.  However, if you take a switch, you may have failures in path on all of your guests...

  Ben

• Clarification and Confirmation on the practical Implications of common Mode on differential measures voltage

  Hello people,

  I've read several documents on the site OR about the premium over common measures of mode and I think I understand, but I'm looking for confirmation through two examples (please).

  Both examples assume a data acquisition card OR with +/-10V inputs and a maximum operating voltage of + / 11V (e.g. PCI-6052 with programmable gain 0.5).

  Example 1: Suppose a DC voltage with two resistors divider and a differential input on the daq card configuration.  First resistance = 4 Ohms connected to 100VDC, second resistance = 96 - grounded (0) Ohms.  This results in a decline of 4VDC to the terminals of the first resistance.  However, I believe that the differential voltage of 4VDC may be connected directly to the daq card because the absolute voltage (i.e. common mode?) is in fact 96VDC to 100VDC which is outside the "working range' of + / 11V for the card.  This conclusion is correct?

  Example 2: Suppose a differential measure between two AC signals and a differential input on the daq card configuration.  First report = 25v@0deg, second signal = 10v@180deg.  Some documents on the Web site of NOR, I gathered that the common mode voltage is the average of the vector representation of the input signals.  In this case, it would be (25v@0deg + 10v@180deg) / 2 = 7.5v@0deg.  I think that this signal can be directly connected to the daq card because one of the signals (25v@0deg) is outside the range of the card work (even if the result "means vectors" is within the scope of the map daq.  This conclusion is correct?

  Thanks in advance for any help,

  chassan

  Chassan,

  You're right both of your examples. Is the best way to look at that is that even if you take a measure differential the maximum voltage you can submit a single channel to the + / 11V to the 6052E. Hope this clears things up a little bit.

• Need a Clarification on the installed component and run Simulator Configuration

  Help!

  I need clarification on what the plugin Eclipse is telling me. There are two parameters that are confusing me. For components installed (found under preferences/Window/BlackBerry JDE/Installed Components), I have a choice of 5.0.0 4.7.0,4.6.1, 4.6.0 4.5.0 and 4.3.0.

  Depending on which component I select when I go in the tab Configurations.../Simulator/course walk, I see a different mix of devices.  In all cases, there is a default Simulator.

  Initially, I assumed that each JDE component supports a mixture of different devices, and that is it compiled correctly, I would be assured that the app would work for all devices on the tab run Simulator Configuration.  In my tests, I found theopposite.  I also assume that, for each component of the JDE, there is a 'default' Simulator that was representative of all devices in the drop-down list run Configuration Simulator.  In my tests, am not sure what actually represents the Simulator 'by default'.

  Can someone clarify how to JDE and Configuration simulators run installed interact and a developer show how to ensure that their application is running on a mix of devices?

  When I finally get to the point where I am ready to deliver, what are the points of decision of installation?  Is it enough to simply require a specific version of an operating system (for example 4.7?) or do I have to create a grid and check the two model number and version of the operating system?

  Thanks for your help.

  "currentT shipping Curve 8330 come with OS 4.5" - they must be, as far as the carrier released a version 4.5.

  "Your statement that most consumers do not upgrade surprised me too" - only I support!  You might get a different opinion of someone else.  But the question is why would?  And our world app downloads indicate that he is did not upgraded phones out there.

  "I guess you are right in this assumption of statementI you are right in this statement"

  What is - an appropriate version of the BlackBerry JDE
  Article number: DB-00537
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800901/What_Is...

  "If there is some Curve 8330 there running 4.5 OS, it's a configuration supported." - correct

  "Construction of the 4.3 OS will be one where the menu appears in the upper right and the built 4.5 OS will be one where the menu is out."  Sounds good

• helping the 'physical LUNS and data mapping file store.

  All the

  HELP REQUIRED PLEASE?

  I have a windows VM, which must be connected to a load of RAW LUN mapped. These LUNS (storage symmetrix btw) were all presented through their esx host and were confirmed by the SAN guys and myself. The question I have now is how can I confirm what the label of "vml.xxx" for each raw mapped LUNs (I can't scroll all the way to confirm what it is!). I need this information so I can marry until Dev ID is presented in which logic unit number. The virtual machine is running and needs to stay on as long as its prod. So my question is, is there a way to know what the full title of the map file is please?

  Check the attachment below which shows a "gross mapped lun" properties and its inability to scroll to the end to copy the mapping file name complete.

  Thanks in advance

  Munster

  1, vmkfstools - q, you get the vml.xxx

  2, esxcfg-mpath - b d vml.xxx you get it naa.xxx and what is the lun number

  3, esxcfg-scsidevs - l d vml.xxx you get more information about that lun

  Binoche, VMware VCP, Cisco CCNA

• I have a VM on an SRDF pair replicated LUNS, and can't seem to get the value of R2 mounted

  I do a test of D/R of a virtual machine that is on the SRDF storage based. Separate us the SRDF pair and try to access the R2 lun, but we cannot see the file system. I see the lun in the storage by HBA list, but it does not appear in the VMFS volumes. I did analyze again several times for the new LUN and again VMFS and it does not appear. The R2 appears read-write from the perspective of SAN... Anyone have any ideas?

  If you have a copy or clone of the existing LUN to another ESX host then you have 2 options, you can configure LVM. DisallowSnapshotLUN 0 and then analyze again, you will see the LUN

  If you use will, LVM, you introduce the cloned copy LUN to the same ESX host. EnableResignature = 1 which will resign the clone lun and a new analysis, do NOT set the instant setting do not allow on the same ESX host as it will probably damage your data.

  When you have finished together LVM back to default settings, IE resign = 0 and DisSnap = 1, these settings are under the host - config - advanced

• the scope, myClass and contextMenu

  I have a class where I define a context menu. The strange thing is, when I call the function, I can't call all the variables from outside the function. The context menu calls the function correctly, but the scope is wonkey all. Is there a way to get around this?
  
  function checkIt() {}
  TEST = 'test '.
  trace (test);
  }
  traces undefined
  
  function checkIt() {}
  var TEST = 'test '.
  trace (test);
  }
  traces "test."
  
  I tried referencing all the variables available, but because of the way its formatted - I must use of _root variables? Or is there a better way that I don't see?

  Help,

  > Hey David, thank you for taking the time.

  Sure thing! :)

  > I think I cleaned up the code to display only whats important. I have
  > 200-1000 + of these objects instantiated 'check' (check boxes)
  > Depending on what the user is looking.

  Very well.

  > class check extends MovieClip {}
  > / / snip...
  > test = new ContextMenuItem ("THIS IS a TEST", checkIt);

  It's here. The question is, all variables or 'this' made reference to the
  the checkIt() function are limited to checkIt(), then your TEST variable... Well,.
  That's the weird part. If it does not already exist (in this scope, anyway).
  It should be created just here, even without the var statement. I am
  in fact do not know why the TEST is not defined by the point, he gets the record, but the
  This is fixed with the delegate class.

  Import mx.utils.Delegate;
  class mark extends MovieClip {}
  public var CM:ContextMenu;
  etc.
  test = new ContextMenuItem ("THIS IS A TEST", Delegate.create (this,
  checkIt));
  etc.

  ... that scopes checkIt() to the class itself, and you will see TEST properly
  put the string 'test' in the Panel out. This seems a bit wonky (I really
  can't think of a better word - you nailed!), but at least you can spend
  along the desired data.

  To smile, you can also send the two settings of
  your checkIt() function:

  function checkIt (obj:MovieClip, point: Object) {}
  trace ("obj:" + obj);
  trace ("point:" + item);
  for (var prop: String in point) {}
  trace ("" + prop + ":" + item [prop]);
  }
  TEST = "test";
  trace (test);
  }

  To me, that the production of the following:

  obj: _level0.instance1
  Article: [object Object]
  visible: true
  enabled: true
  separatorBefore: false
  onSelect: [type function]
  Caption: THIS IS A TEST
  test

  ... where obj is clearly the video clip itself, and the point is ContextMenuItem
  object.

  David Stiller
  Adobe Community Expert
  Dev blog, http://www.quip.net/blog/
  "Luck is the residue of good design."

• Component in the scope and cflock

  Hello
  
  I have a CFC that I put in the scope in the SystemFramework method that contains some system settings, which is an indicator to tell if the site is currently 'online '. I call a method on this CFC in the 'onRequest' Application.cfc method to see if the value of the indicator has changed.
  
  This method throws a parameter defined in the database that indicates whether the site is "online" or "offline". If the site is currently online, I want to just redo the query every 5 minutes. However, if the site is unavailable, I want to check more frequently (every 5 seconds) as to if the flag changed back.
  
  I don't know, what if I need to use < cflock > when I change from 'online' to 'offline '? There is only one instance of this object, but what happens if several applications are calling the 'isSiteOnline' method at the same time? It is "safe"?
  
  Some code snippets are attached to illustrate.
  
  Any advice would be greatly appreciated.
  
  Kind regards
  Andrew.
  

  >

  No, in every situation.

  Ask yourself... The consequences of two queries hit
  This line of code "simultaneously"? The final result is that both of them
  are setting the variable to the same static value... it's what's happening
  eventually occur: variables.instance.cacheInterval will be the value
  300 (or 5) in each situation.

  You may with to lock a block of code which - if called
  at the same time through several applications - could act on shared storage
  space (server, application or session data) differently and incorrectly
  What is planned.

  for example:
  
  
  application.isInitialised >
  

  
  
  
  
  
  

  So a sequence of events might be (for example, the user is hitting the site with two
  different browsers):

  REQUEST1: application.isInitialised does not exist
  REQUEST1: starts the init process
  REQUEST2: application.isInitialised STILL does not exist
  REQUEST2: starts the init process * new *.
  REQUEST1: sets the value of application.isInitialised
  REQUEST2: sets the value of application.isInitialised

  Of course, we don't want two ask the running initialization code.

  Note This is an example a bit far-fetched, as if we have a
  OnApplicationStart() method, then it runs only once, and that's where
  Should the init code, but it illustrates the problem.

  Google "race condition". These are the situations in which there
  the code lock blocks.

  --
  Adam

• Net M4110x - Net management and iSCSI. Clarification of the configuration steps. The documentation is at best ambiguous.

  Hi guys,.

  I'm having a lot of trouble to translate what I know PS6000 table to the new M4100x.  Here's what I'm building:

  

  I want my iSCSI traffic that is completely isolated from all other traffic, and I want to use the CMC network to run the Board.  It must be a simple configuration, but Dell documentation for which is worse than useless.  It confuses and everyone who's read it confuses.  Why is this?

  It seems that I should be able to assign the IP addresses of management using the MCC according to DELL:

  Step 1.  Initialize the storage

  * Once in the CMC right-click on storage open storage gui initialization.

  * Member name: MY_SAN01
  * Member, IP: 192.168.101.10
  * Member gateway: 192.168.101.254
  Group name: MY_SAN
  Group IP address: 192.168.101.11
  Group of Memebersip password: groupadmin
  * Password Admin group: groupadmin

  It sounds simple enough, and when I apply this I guess I will be disconnected my M4110x simply because it currently resides on a separate network (net 2 in the image above).  Now how to set up the IP address of my CMC (net0 in the picture above) network management?

  Step 2.  Set ip management port

  According to the documentation of Dell, I have:

  To set the management port:

  * Open a telnet (ssh) session on a computer or console that has access to the PS-M4110 range. The array must be configured beforehand.
   
  * Connect the PS-M4110 modules using the following racadm command: racadm Server 15 connect
   
  * Connect to the PS-M4110 array as grpadmin

  Once I am in:

  Activate the management controller ports using the following commands in the CLI:
  0 > member select MY_SAN01
  1. (array1) > eth select 1
  2. (array1 eth_1) > 10.10.10.17 ipaddress netmask 255.255.255.0
  3. (array1 eth_1) > upward
  4. (array1 eth_1) > exit
  5. (array1) > grpparams
  6. (array1 (grpparams)) > network management-ipaddress 10.10.10.17

  (array1 (grpparams)) > exit

  My interpretation is correct?  Now my questions:

  1. in step 2. SubStep 1 - How can I know what ethernet interface to use?  Step 1 automatically assume eth0?

  2. am I correct in using the same IP address for both step 2 - substep 2 and substep 6?  Or do I have to assign a different IP address for these?  10.10.10.18 maybe.

  3. step 2 - substep 6, it doesn't seem to be that a network mask is that correct?

  4. comparison of the ps6000e - I set up an IP address for each controller (so 2) and then assigned an IP address for the group.  It's 3 IP addresses.  For this M4110, it seems that I have only one controller.  Is this correct?  The specifications make a point that there are 2 controllers.  What happened to the IP address of the controller of the 2nd?

  CLOSE-UPS

  I intend on building a VMware cluster using the algorithm of multiple paths of DELL and I built it to the DSC, but a technician Dell put in place the table initially and have not set up a dedicated management port.  Required configuration routing traffic on the net iSCSI management.  It is not recommended, and I don't want to set up this way.

  Currently, he is a blocking problemand I need to go beyond this ASAP.  I work with a large system integrator in Texas and plan on the order that these systems built this way on their part.  This means that I must be able to explain to them how to proceed.  This issue is standing in the way of progress, and I really hope I can get a satisfactory response from this forum.  Thanks for any helpful answers.

  I think I have the answers to my own questions:

  1. YES.  Step 1 automatically assume eth0.  There are TWO Ethernet interfaces and eth1 is disabled by default, and unless you use step 2 to set the management port this second Ethernet interface is never used.

  2. No. I can't use the same IP address for both lines.  In lower level 6 I need to use a different IP address on the same network 10.10.10.18 would work fine.

  3. YES.  It is correct.  Lower level 6 assumes the network mask that I have included in the point 2.

  4. it's tricky.  There is NO WAY to configure Active/active on these tables.  There are 2 controllers, but one "still asleep," unless the other fails.  Actually, the IP address is assigned to an Abstraction Layer, it maintains.  When fails another controller "awakens" and just starting to accept traffic and it doesn't care what its IP address.

  Another point.  Now that my table is initialized and my interfaces are configured, I need to know what IP address to point my ESXi hosts for their storage.  Use the IP address of the group assigned in step 1.  It is 192.168.101.11 (there is typo in the original post).

• Question about the scope of the object and memory.

  I created a class that extends Sprite.

  In this class, I have a private type BitmapData var

  I then add the Sprite as a child to another Sprite on the stage.

  Later, I delete the second Sprite (parent) of the scene and I put the variable referring to it to null.

  After the garbage collection (assuming that it happen correctly) there is no trace of the BitmapData?

  No, unless you did something extra.  If you cannot reference your bitmapdata object (and has no listener), he is eligible for gc.

• Clarification of the policy of startup SAN

  I would like clarification on the policy of SAN Boot. I was always under the impression that you were supposed to use the storage port WWPN. But what happens if you have many ports of storage from the table (16 for example), this is not possible.

  The purpose of this policy is to simply force the HBA to open a session in the SAN fabric?

  If Yes, can I use one of my real picture or just make one, correct?

  Since all zoning is done by the SAN switch (Brocade/MDS/Nexus) and LUN masking to the level of the table, I think putting the real WWPN to a storage port is not necessary.

  Thanks for any clarification.

  Yes, a 'false' WWPN will work and they connect to the SAN infrastructure... Photos attached show 2 ways to do this... However, if you install Windows 2012/Hyper-V, I suggest using WWPN valid because it seems not to be able to manage multiple ESX possible access paths when you first install...

  

  

• Mail on El Capitan has problem with answer and respond to the

  I just upgraded from Yosemite to El Capitan (10.11.2) on my MacBook Pro 15 in late 2008, and everything seems to work fine (so far) with this exception.

  When I try to reply to a message, a message window opens with nothing entered.  No to the:, no subject:, nothing in the body of the email from the original.  Just empty in all areas.  When I try to close the window with the red button, it does nothing, so now I have a useless window I can't close.  I can fill in the To and subject to the fields, but when I try to tab or the mouse in the body of the email, the cursor disappears.

  My only way to dispel this is so close to what point mail accidents.  I have attached the crash debugging information below.

  Does anyone know why it would act this way?  I looked at the symptoms and have rebuilt my Inbox, but continues to be the same thing.  Any suggestion would be appreciated.  Clearly, I can't be the only one to experience this.

  Thanks for your help,

  Dana

  Mail Crash problem Details:

  Process:	Mail [5900]
  Path:	/Applications/mail.app/Contents/MacOS/mail
  Identifier:	com Apple.mail
  Version:	9.2 (3112)
  Update information:	Mail-3112000000000000 ~ 1
  Code type:	X 86-64 (native)
  Parent process:	??? [1]
  Responsible:	Mail [5900]
  ID of the user:	70 s

  Date/time:	2015-12-27 15:48:56.189-0800
  OS version:	Mac OS X 10.11.2 (15 C 50)
  Report Version:	11
  Anonymous UUID:	ADF110C8-9D0A-27F4-E6CF-7D03D74A4136

  Sleep/wake UUID:

  13378DBA-6987-4A23-B7D5-6B5725129890

  Time since started awake: 37000 seconds

  Wake time:

  1 200 seconds

  Integrity of system protection: enabled

  Discussion crashed:

  16 send queue: NSOperationQueue 0x7f9a5d870f20: NSOperation 0x7f9a5da03ae0 (QOS: LEGACY)

  Exception type:	EXC_CRASH (SIGABRT)
  Exception codes:	0 x 0000000000000000, 0 x 0000000000000000
  Note the exception:	EXC_CORPSE_NOTIFY

  Request for clarification:

  Reason for termination due to an untrapped exception 'NSInternalInconsistencyException' app,: "this method should be called on the main thread.

  Abort() called

  ending with an exception uncaught of print type

  I use the response and answer all several times a day every day and have not seen an accident as you mention.

  Any chance you can post the log of crash _entire_, rather than just the beginning of it?

• Seeking clarification on the SFD in AKM Brushless Servo Drives

  Dear members,

  I'm looking for clarification on the smart feedback device (SFD) installed in the series of servomotors AKM. There is little information available on this subject in the specifications. It appeared that it offers a very high resolution, information on the position of the rotor high precision signals.

  1. how exactly is the PCG provides the position of the rotor?

  2. is there a provision to contract low resolution effect Hall of EPD type feedback?

  Thank you.

  Ansari07

  Hi Ansari07,

  I don't think that this level of control is possible with the AKD. The reader is supposed to close its own current loop on board for the control of switching and outputs of phase. The AKD offer couple, speed or modes of control position, and you can talk to it by Ethernet on the service port, via a field such as EtherCAT or CANOpen bus, or with an analogue signal +-10V or step/dir commands.

  I don't think you can get around all of the internal firmware in the AKD and get direct control of how current passes through the phases.

  Best regards

  Nate