2 the NLB Cluster nodes will be detected as 1 Server

Similar Questions

• Can I install a unordered nonclustered sql named instance on the existing cluster node

  I have a two node (A node / node B) SQL 2008 R2 cluster.

  I was asked to install a SQL instance not cluster on node A in the cluster.

  This would be an instance named (node A/namedSQLinstance) and have his own records for the database files.

  I have an ip address and a DNS entry

  Is it possible to do?

  Thanks :)

  Hi Hoodster,

  The question you posted would be better suited in the TechNet Forums. Please see the link for support.
  http://social.technet.Microsoft.com/forums/en-us/winserverClustering/threads
  Hope this information helps.

• Too many IP addresses on the RAC cluster node

  I have 2 Virtual Box computers running a 11.2.0.3 RAC cluster using Oracle Linux 6.3.

  It is / etc/hosts on the first node:

  [root@vmoe1 etc] # cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  #

  # Public

  192.168.56.51 vmoe1.localdomain vmoe1

  192.168.56.52 vmoe2.localdomain vmoe2

  # Private

  192.168.43.51 vmoe1 - priv.localdomain vmoe1-priv

  192.168.43.52 vmoe2 - priv.localdomain vmoe2-priv

  # Virtual

  192.168.56.61 vmoe1 - vip.localdomain vmoe1-vip

  192.168.56.62 vmoe2 - vip.localdomain vmoe2-vip

  #

  192.168.56.74 ol6elsa0

  #

  192.168.56.251 c11.localdomain c11

  [root@vmoe1 etc] #

  IP configuration scripts are:

  [root@vmoe1 network-scripts] # cat ifcfg-eth0

  DEVICE = 'eth0 '.

  IPADDR = 10.0.2.15

  HWADDR = "08:00:27:D5:E5:93."

  TYPE = "Ethernet".

  [root@vmoe1 network-scripts] # cat ifcfg-eth1

  DEVICE = 'eth1 '.

  IPADDR = 192.168.56.51

  HWADDR = "" 08:00:27:7 C: 08:7F ""

  TYPE = "Ethernet".

  [root@vmoe1 network-scripts] # cat ifcfg-eth2

  DEVICE = "eth2".

  IPADDR = 192.168.43.51

  HWADDR = "08:00:27:E9:E8:99."

  TYPE = "Ethernet".

  [root@vmoe1 network-scripts] #.

  But if I run ifconfig, I see that too many IP addresses are assigned:

  [root@vmoe1 network-scripts] # ifconfig

  eth0 Link encap HWaddr 08:00:27:D5:E5:93

  INET addr:10.0.2.15 Bcast:10.255.255.255 mask: 255.0.0.0

  ADR inet6: fe80::a00:27ff:fed5:e593 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 146 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 219 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 11370 (11,1 KiB) TX bytes: 22754 (22.2 KiB)

  eth1 Link encap HWaddr 08:00:27:7 C: 08:7F

  INET addr:192.168.56.51 Bcast:192.168.56.255 mask: 255.255.255.0

  ADR inet6: fe80::a00:27ff:fe7c:87f / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Fall of RX packets: 2982 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 2063 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 355353 (347,0 KiB) TX bytes: 478295 (467.0 KiB)

  eth1:1 Link encap HWaddr 08:00:27:7 C: 08:7F

  INET addr:192.168.56.61 Bcast:192.168.56.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth1:2 Link encap HWaddr 08:00:27:7 C: 08:7F

  INET addr:192.168.56.65 Bcast:192.168.56.255 mask: 255.255.255.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  eth2 Link encap HWaddr 08:00:27:E9:E8:99

  INET addr:192.168.43.51 Bcast:192.168.43.255 mask: 255.255.255.0

  ADR inet6: fe80::a00:27ff:fee9:e899 / 64 Scope: link

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Dropped packets: 197896 RX errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 128717 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:1000

  RX bytes: 160437548 (153,0 MiB) TX bytes: 62783891 (59.8 MiB)

  eth2:1 Link encap HWaddr 08:00:27:E9:E8:99

  INET addr:169.254.237.102 Bcast:169.254.255.255 mask: 255.255.0.0

  RUNNING BROADCAST MULTICAST MTU:1500 metric: 1

  Lo encap:Local Loopback link

  INET addr:127.0.0.1 mask: 255.0.0.0

  ADR inet6:: 1/128 Scope: host

  RACE of LOOPING 16436 Metric: 1

  Fall of RX packets: 32960 errors: 0:0 overruns: 0 frame: 0

  Dropped packets: 32960 TX errors: 0:0 overruns: 0 carrier: 0

  collisions: 0 txqueuelen:0

  RX bytes: 19428995 (18.5 MiB) TX bytes: 19428995 (18.5 MiB)

  [root@vmoe1 network-scripts] #.

  According to syslog, it seems that NTP uses IP addresses a lot for example 192.168.56.65:

  [root@vmoe1 network-scripts] # grep "56.65" var

  Mar 19 14:35 vmoe1 ntpd [1545]: listening on the interface #11 eth1:1, 192.168.56.65 #123 Enabled

  Mar 19 14:43:23 vmoe1 ntpd [1735]: listening on the interface #12 eth1:2, 192.168.56.65 #123 Enabled

  [root@vmoe1 network-scripts] #.

  
  

  Can someone explain why 192.168.56.65 this IP address is used by eth1:2?

  I found the reason why: IP addresses ending with 64, 65 and 66 are used by the listener to SCAN:

  [root@vmoe2 ~]# srvctl config scan
  SCAN name: vmoe-scan.localdomain, Network: 1/192.168.56.0/255.255.255.0/eth1
  SCAN VIP name: scan1, IP: /vmoe-scan.localdomain/192.168.56.65
  SCAN VIP name: scan2, IP: /vmoe-scan.localdomain/192.168.56.66
  SCAN VIP name: scan3, IP: /vmoe-scan.localdomain/192.168.56.64
  

• What is the cluster node and which is a member of the cluster?

  What is the cluster node and which is a member of the cluster?
  How to differentiate them?

  I agree with you all.
  But note that a node is a server JVM. A large number of nodes can co-locate in the same machine. Entire application process or the server that is running software consistency is called a cluster node.
  But Member and the cluster node is different concepts. Consistency is logically divided into clusters, services and caches. A cluster of coherence is a group of cluster nodes that share a group address, allowing you to communicate, the cluster nodes. Generally, a cluster node will join only a single cluster, but it is possible for a cluster node to join (membership) several different groups, using a different group for each cluster address.

  Fran

• Cold migration of MSCS cluster node clients?

  Work on the establishment of a MSCS cluster on 2 hosts.  The hosts are the ESXi 5.5 build 1892794.

  My shared disks are RDM compatibility mode physical that I have attached to a second SCSI controller in physical sharing mode.

  My cluster validation wizard is successfully completed.

  However, if I turn off the guests, everyone migrate to a different host (with FC to the RDM LUN connectivity), turn on and then run the cluster validation Wizard error e/s disk wizard reports on tests of arbitration and failover.

  I learned that when I see these mistakes I can unsubscribe the VMs, detach the storage from the host, restart the host, attached storage, re - save virtual machines, and then validation is successful.  However, it is a bit complicated and if I say lose a blade and need to put one of my guests node elsewhere, I want to do without the time and hassle.  Is this possible?

  I know vMotion is not supported with the physical bus sharing, but this ban applies to cold (power off) so migration?  Or is this an indication that I screwed up my configuration?

  Any thoughts would be great.

  Thank you

  Here's what VMware has sent:

  =======================

  -A virtual machine that has a ROW in a MSCS cluster connected in physical compatibility mode cannot be vMotioned.

  -Even if you do a cold vMotion (stop the virtual computer, then vMotion), the ROW could be detected as vmdk and you may need to remove
  She and present it back or re - enter as you mentioned.

  -Best practices recommend Vmware are that - before the migration, remove the ROW of the virtual machine, and then migrate the virtual machine. Once the
  VM was vMotion, then you can attach the RDM to the virtual machine.

  Unfortunately there is no work around on this
  scenario.

  ======================================

  So I guess the cold, you can migrate the MSCS cluster nodes but sometimes it does not work quite as well and so its best to remove the ROW before migration cold.

  Thanks to all who have posted!

• use of the high memory in the database of node cluster 2

  Summary of environmental

  Cluster nodes RHEL6.4/11.2.0.3.0/ASM/2

  free m

  total used free shared buffers cached

  MEM: 32096 31723 372 0 238 16277

  -/ + buffers/cache: 15206 16889

  Swap: 16383 178 16205

  Each s 1.0: ps EI o % mem, % cpu, cmd | sort - n - r k 2 | head - 10 Thu Feb 27 16:32:15 2014

  4.8 0.2 /u01/app/11.2.0/grid/bin/osysmond.bin

  mem % 0.0 4.0 ps EI - o, % cpu, cmd

  ora_lms1_orcl2 19.6 1.3

  ora_lms0_orcl2 19.6 1.3

  /etc/kannel.conf 0.2 0.9/usr/sbin/bearerbox

  asm_vktm_ 0.9 0.0 + ASM2

  ora_vktm_orcl2 0.8 0.0

  /opt/app/Java/JDK1.6.0_12/JRE/bin/Java 7.7 0, 7-server-Xms8192m-Xmx8192m - XX: MaxPermSize = 256 m - XX: NewSize = 2048M - XX: karine

  2.5 0.7 /opt/app/java/jdk1.6.0_12/bin/java-Djava.util.logging.config.file=/opt/app/csdtomcat/apache-tomcat-6.0.35/c

  /U01/app/11.2.0/grid/bin/ocssd.bin 0.3 0.7

  SQL > select value, name from v$ sysstat whose name like '% gc.

  THE VALUE NAME

  ---------- ----------------------------------------------------------------

  398431945 gcs sent messages

  24465773 gc cr block served

  92438 flush time gc cr block

  52157 timeout reading gc

  100272 expected read gc

  failures of reading waiting 0 gc

  15 gc waiting read timeouts

  77789637 blocks of courses gc served

  826771 gc block pine time

  130755 block course gc flush times

  51119356 blocks of cr gc has received

  5027865 gc cr block receive times

  61272732 blocks of course gc has received

  4268980 block of course gc receive times

  181763086 local grants of gc

  56125079 grants remote gc

  716839431 gc sent kilobytes

  101203847 gc saved KB

  30105492 compressed blocks of gc

  blocks of gc lost 0

  blocks of claims gc lost 0

  0 gc corrupt blocks

  0 gc CPU used by this session

  0 player gc bypass grants

  time of generation 0 gc cr block

  0 gc cr block send time

  current block 0 gc send times

  Node-1

  Each s 1.0: ps EI o % mem, % cpu, cmd | sort - n - r k 2 | head Thu Feb 27 - 10 17:19:47 2014

  16.3 51.7 /opt/netvertexp/java/jdk1.6.0_12/jre/bin/java-serveur-Xms8192m-Xmx8192m - XX: MaxPermSize = 256 m - XX: NewSize = 2048M - XX: karine

  6.5 0.2 /u01/app/11.2.0/grid/bin/osysmond.bin

  0.0% mem 5.0 ps EI - o, % cpu, cmd

  2.2 0.0/usr/sbin/tcpdump bond0 w s port 65535 /root/pcapprimary/netvertexp-27Feb_17_15.pcap 3868-i

  /U01/app/11.2.0/grid/bin/ocssd.bin 0.4 1.4

  19.5 1.2 ora_lms1_orcl1

  19.5 1.2 ora_lms0_orcl1

  ora_dbw1_orcl1 19.7 0.9

  ora_dbw0_orcl1 19.7 0.9

  ora_vktm_orcl1 0.9 0.0

  Node-2

  Each s 1.0: ps EI o % mem, % cpu, cmd | sort - n - r k 2 | head Thu Feb 27 - 10 17:19:07 2014

  4.8 0.2 /u01/app/11.2.0/grid/bin/osysmond.bin

  mem % 0.0 3.0 ps EI - o, % cpu, cmd

  oracleorcl2 0.1 2.5 (LOCAL = NO)

  ora_lms1_orcl2 19.6 1.3

  ora_lms0_orcl2 19.6 1.3

  /etc/kannel.conf 0.2 0.9/usr/sbin/bearerbox

  asm_vktm_ 0.9 0.0 + ASM2

  ora_vktm_orcl2 0.8 0.0

  /opt/app/Java/JDK1.6.0_12/JRE/bin/Java 7.7 0, 7-server-Xms8192m-Xmx8192m - XX: MaxPermSize = 256 m - XX: NewSize = 2048M - XX: karine

  2.5 0.7 /opt/app/java/jdk1.6.0_12/bin/java-Djava.util.logging.config.file=/opt/app/csdtomcat/apache-tomcat-6.0.35/c

  How to troubleshoot the depth to find the cause of the heavy memory usage. ?

  Thank you

  hitgon

  Hello

  vmstat-s

  This will give a more detailed overview. Search for active/inactive values and used swap. If active memory is close to the total memory and you have a larger amount of used swap, then you might have the memory pressure.

  If the Exchange is not used much, and you have the right percentage of inactive memory, then linux could easily swap memory without a performance problem. In this case, the pressure of memory is very likely.

  For a report very detailed on the use of single process

  PMAP pid - x

  M and the press allows you to sort by memory use. If you are using pmap on bigest processes, then you should have a good starting point was that your memory has disappeared.

  Concerning

  Thomas

• Could not start the 2nd node - Exception ' this cluster node failed to deserialize the config java.io.StreamCorruptedException: invalid type: 100.

  I use a single node of consistency on Solaris 10, 64-bit 1.7 JVM. It works very well. However, the problems start when I'm trying to start a 2nd node of Eclipse running on the JVM 64-bit Windows that is configured exactly the same as on Solaris. Observing these two newspapers JVMs, I can see that each node detects the other, however, the node that was started the 2nd always gets the exception below and ends. It doesn't matter on what OS I starts it's always the 2nd JVM that gets this error.

  What can be wrong? What is my config? If it wasn't, why the first node set up and working properly?

  Here's the exception:

  2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] ERROR consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < error > (thread = Cluster, member = 3): this cluster node failed to deserialize the config

  java.io.StreamCorruptedException: invalid type: 100

  at com.tangosol.util.ExternalizableHelper.readObjectInternal(ExternalizableHelper.java:2348)

  at com.tangosol.util.ExternalizableHelper.readObject(ExternalizableHelper.java:2336)

  at com.tangosol.io.DefaultSerializer.deserialize(DefaultSerializer.java:74)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.readObject(Service.CDB:1)

  at com.tangosol.coherence.component.net.Message.readObject(Message.CDB:1)

  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService$ ServiceJoining.read (ClusterService.CDB:14)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.deserializeMessage(Grid.CDB:19)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:21)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.onNotify(ClusterService.CDB:3)

  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:51)

  at java.lang.Thread.run(Thread.java:724)

  Stop the Cluster service.

  2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] ERROR consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < error > (thread = Cluster, member = 3): asked to stop the cluster service.

  2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] DEBUG consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < D5 > (thread = Cluster, Member = n/a): Service de Cluster in the cluster on the left

  2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] ERROR consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < error > (thread = Invocation: management, Member = n/a): InvocationService ending because of an exception not handled: java.lang.RuntimeException

  2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] ERROR consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < error > (thread = Invocation: management, Member = n / a):

  java.lang.RuntimeException: join query has been abandoned

  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.doServiceJoining(ClusterService.CDB:86)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onServiceState(Grid.CDB:23)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.setServiceState(Service.CDB:8)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.setServiceState(Grid.CDB:21)

  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ NotifyStartup.onReceived (Grid.CDB:3)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:38)

  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:23)

  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:51)

  at java.lang.Thread.run(Thread.java:724)

  2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] DEBUG consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < D5 > (thread = Invocation: management, Member = n/a): service management left the cluster

  2013-09-26 14:15:29, 378 [Logger@9254847 12.1.2.0.0] DEBUG consistency - 2013-09-26 Oracle coherence GE 12.1.2.0.0 14:15:29.378/6.164 < D4 > (thread = Cluster, Member = n/a): delayed ignorant response to the JoinRequest for management 14:15:29.42 2013-09-26

  POF serialization (-System Dtangosol.pof.enabled = true property) is enabled on the first node and disabled the second.

• How to set of Cluster nodes on the same network but on different gateways

  Hello
  We want to set of Cluster nodes on the same network but the connection through different gateways for Unicast (WKA). We strive to add sockets for < cluster-config > tangosol-coherence - override.xml file, pls help how to set.

  Looks like you are using the default configuration for the system property:

  8088
  true

  The probable reason for this question, it's the localport is unaffected as 8088 for communication on the machines. Either use the property system - Dtangosol.coherence.localport = 8088 and - Dtangosol.coherence.localport.adjust = false or see the node will connect and find node assigned to each node and open the nodes; recommended to use multiple addresses node as in unicast configuration below:

  well-known-address >
  
  
  

  XXX
  
  8088
  
  
  
  YYY
  
  8088
  
  

  See you soon,.
  Neeraj

• RAC 11.2.0.1 to 11.2.0.2 to the new Cluster upgrade with any number of nodes

  I'd like suggestions on upgrading a RAC Oracle 11.2.0.1 in Linux x86_64 RHEL 5.3 with 6 cases of a new cluster with 4 linux x86_64, RHEL 5.5 and upgrading to 11.2.0.2 nodes group of hotfixes.
  New SAN storage will be used. Both systems use ASM.
  
  Current system... New system
  11.2.0.1... 11.2.0.2
  6 instances... 4 instances
  Linux RHEL 5.3 x86_64... Linux RHEL 5.5 x86_64
  
  Method:
  (1) run controls and upgrades pre scripts
  (2) save the current database with RMAN and put at the disposal of the backup files to the new host
  (3) install grid Infrastcure on the new cluster 11.2.0.2
  (4) set up ASM on the new Cluster
  (5) install the Oracle RAC 11.2.0.2 on the new cluster database and create the database with the same name of the original database.
  (6) startup nomount using a parameter file and the source of DBID edited without the cars parameters (cluster_database = false, etc...)
  7-restore Rman backup controlfile to step 1
  (8) restore / restore incomplete database
  (9) OPEN RESETLOGS UPGRADE
  10) proceed to updates manual steps (script catupgrd.sql, etc.)
  (11) remove the cancellations additional tablespaces e redo log son
  (12) CONVERTED to THE CARS USING DBCA or RCONFIG
  
  This method is correct? Do you offer other methods or corrections?
  
  I also want to know if there is another thing to delete, besides redo threads and undo tablespaces, due to the smaller number of cases.
  
  I also considered using RMAN DUPLICATE to the same version (11.2.0.1) and then MOVE to 11.2.0.2, but DOUBLE would change the DBID.
  
  Thank you

  Hello

  your efforts seem valid, but its awfully difficult.

  Why not simply create a watch on 11.2.0.1 and then update.
  If you are using "duplicate for standby" should not change the dbid.

  Then, you can just 'turn on' the night before and continue the upgrade.

  Concerning
  Sebastian

• How to prevent a node of the main Service of Cluster node?

  Hello
  
  Anyone know how to configure the cluster of consistency in a way that some nodes will never receive as a main Service of cluster node?
  
  We have some compatible storage nodes and some people with disabilities-storage and want to make sure disabled storage nodes are never chosen as main node of cluster service.
  
  Would it be useful to give lower priority of Member identity nodes to storage-disabled people?
  
  We use a consistent patch 3.3.2 1.
  
  Thank you
  Alexey

  Alexis,

  That would be my recommendation based on the reading of your condition, use extend customers...

  Good luck

  -Noah

• J4580: J4580 will not detect the alignment page.

  My J4580 that works very well for years, now will not detect the alignment page after you print and put on the scanner bed.  I try three times and it then goes to the default alignment parameters.  It still prints but text tends to little fuzzy.  What can I do to fix this?

  Hi @BruceK43,

  Thanks for joining the Forums of HP Support for a solution to your problem of alignment.

  I understand that you used a HP Officejet J4580 all-in-One printer with a Windows 10 computer but when you try to only scan the alignment page, the printer is not detected by the alignment page returns to the default alignment parameters. I would like to help with that.

  Here is the document of support designed to be used with this problem - a "alignment failed" Error Message appears on the printer control panel.

  Please let me know if that solves the problem, or if you need assistance.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• IntelliPoint 8.2 will not detect the 4000 Wireless Mobile mouse

  I'm running Windows 7 pro 64 bit on a mobile workstation Dell M4800.  I bought a mouse Wireless Mobile 4000 which is supposed to have programmable buttons.  I went to the web page of material/downloads and downloaded Intellipoint 8.2 who is supposed to be the software for this device.  The software installed with no problem, but it will not detect the mouse and I can't program the buttons.  On the devices tab, the program detects the touch pad mouse and Dell (listed as compatible mouse HID).  The mouse works with the basic functionality, but I need to program the buttons

  Hi John,.

  If you have installed the correct versions for the mouse, then, it could be a problem with the mouse settings associated with the soft keys.

  For confirmation, this is the link for the latest driver:
  http://www.Microsoft.com/hardware/en-us/d/wireless-mobile-mouse-4000

  If the driver is in place, I suggest you to contact the Microsoft Hardware support for additional help:
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Please let us know if you have more queries on Windows.

• Windows 7 will not detect THE routers wireless, including mine.

  Windows 7 will not detect THE routers wireless, including mine. I inserted the cd of restoration of the system, and after that he picked up no internet. No, even if I connect it with the wire! Help!

  Hello

  Thank you for contacting Microsoft Community.
  Is properly installed wireless adapter driver?
  Go to start-> type devmgmt.msc-> press on enter. In the Device Manager window, expand network adapters. You should be able to see a list of network adapter as Ethernet, Bluetooth, etc. Make sure that you can find the adapter wireless from the list. If so, double-click it. Properties windows will be open. On the general tab, under device status, if it shows that the device is not functioning properly, please remove the case, locate the wireless network card and make sure the connections of antennas are coneected correctly. If even a connection is not properly connected or damaged, you cannot connect to any WiFi network.
  Response if the issue is not resolved.

• Two-node Rac (11204) Cluster node 1 has failed to stop with error: impossible to get in touch with the loan of cluster service. duty to force stop

  Newly build Production environment (don't use it yet)

  OS: Linux redhat 64-bit 2.6.18

  Cluster version: 11.2.0.4

  This environment clusterware installed last December, we are trying to install oracle RDBMS, so try to first stop the crs.  However on node 1, the v$ asm_diskgroup shows nothing under total_mb /free_mb on diskgroup OCR.  and stop the crs shows: impossible to get in touch with the loan of cluster service.

  Alerts cluster log shows below:

  2014-03-25 03:50:01.429:

  [crsd (8608)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u00/app/11.2.0.4/grid/log/oprd100/crsd/crsd.log.

  2014-03-25 03:50:01.433:

  [crsd (8608)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  ]. Details at (: CRSD00111 :) in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.)

  2014-03-25 03:50:02.123:

  [ohasd (12490)] CRS - 2765:Resource 'ora.crsd' failed on the server "orpd100".

  2014-03-25 03:50:03.407:

  [crsd (8623)] CRS-1013: the location of the OCR in ASM disk group is inaccessible. Details in u01/app/11.2.0.4/grid/log/orpd100/crsd/crsd.log.

  2014-03-25 03:50:03.411:

  [crsd (8623)] CRS - 0804:Cluster Ready Service interrupted due to the Oracle Cluster registry error [PROC-26: error when accessing the physical storage]

  The NEWSPAPER of the ASM alerts:

  Wed Mar 25 03:21:49 2014

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  WARNING: Waited 15 seconds IO to write to the disk of PST 1 in Group 1.

  WARNING: Waited 15 seconds to write IO to disk of PST 2 in Group 1.

  Wed Mar 25 03:21:49 2014

  NOTE: process _b000_ + asm1 initiating (21071) 1.1807368888 disk offline (OCR_0681_2EF4) with mask 0x7e in Group 1

  NOTE: process _b000_ + asm1 initiating (21071) 2.1807368889 disk offline (OCR_0681_2EF5) with mask 0x7e in Group 1

  NOTE: check PST: grp = 1

  GMON seeking ways of disc for Group 1 to 5 pid 27, DiSo 21071

  ERROR: read no quorum within Group: required 2 found 1 records

  NOTE: audit PST grp 1 fact.

  NOTE: start the PST update: grp = 1, dsk = 1/0x6bba42b8, mask is 0x6a, op = clear

  NOTE: start the PST update: grp = 1, = 2/0x6bba42b9 dsk, mask is 0x6a, op = clear

  GMON update modes of disk for the Group 1 to 6 for 27, DiSo 21071 pid

  ERROR: read no quorum within Group: required 2 found 1 records

  Wed Mar 25 03:21:49 2014

  NOTE: disassembly of the cache (not clean) Group 1/0x35AAB27B (OCR_DATA)

  WARNING: For disk offline OCR_0681_2EF4 0x7f mode failed.

  2 node rac cluster is normal.  We were able to stop the crs without force.

  What should I look at to understand what is happening here?

  Thanks to adavnace.

  WARNING: For disk offline OCR_0681_2EF5 0x7f mode failed.

  NOTE: e-mail CKPT suspend pins Unix process pid: 21073, image:

  No default value is 1 M