Install Snow Leopard Retail: Checking the Installation failed

Similar Questions

• I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  I have a mac 2009 i (late), I want again to install snow leopard (I have the disc), but my driver disk is broken! So I want to ask if there is a way to create a disk image of my windows pc to use it through the hard drive of my imac Lord?

  External DVD USB drives are cheap. Usually $20 for a good quality player. Just buy one of these at Best Buy or another store and use it to install Snow Leopard. Then you also have a drive for something else that you have on the disk.

• AE CS4 does not open with my install Snow Leopard

  I just finished install Snow Leopard and a new installation of my CS4 Production Studio, everything works accept for AE. It bounces just on the departure of bar, then stops. Nothing more. No idea why?

  Did you day AE version 9.0.2?

• Code 80070005 that I tried to install a update for my HP w1907 wide LCD monitor since I got this computer last year, but the installation fails every day.

  I tried to install a udate for my HP w1907 LCD's wide screen since I got this computer last year, but the installation fails every day.

  Thanks for the clarification, jackfrompa. If the monitor works to your satisfaction, then I see no reason to update his driver unless there is a Security problem with the current driver.
  I can't find info list of video drivers of HP being a security risk.
  Is the latest driver display on the site of HP for Vista Premium 32 bit for the HP w1907 19 inch Widescreen LCD Monitor

  Version: 2.00 Rev a.
  October 16, 2008

  There is also a driver for LCD 19 inch HP w1907 screen available for Vista which was released in October 2008 with the same Version, but I don't know if it is the same driver for the HP w1907 19 inch Widescreen LCD Monitor.

  If it helps, here are the steps from HP for a monitor driver installation in Windows 98, Me, XP and Vista .
  MowGreen Services consumer safety update

• install new printer Epson WF-2530, will not install scanner drivers error message ' could not launchrequired program during installation, check the installation disc, and then run the installation again.

  having a problem installing drivers for a new Epson printer scanner all in a WF-2530 on my desktop using windows vista

  error message "could not launch the required program during installation, check the installation disc, then re-run the installer.

  I managed to install the software on my laptop using windows 7.

  spending some time with epson tech dept, after several attempts to solve the problem, they advised that it was a problem with the microsoft software.

  have tried to install it on the internet from the site of epson, but same error

  any help would be greatly appreciated

  < have="" tried="" installing="" over="" internet="" from="" epson="" website="" but="" same="">
  Do you mean that you have downloaded the Epson driver?

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=209709

  Try using the wizard adding printer in the Control Panel, printers. In the wizard, select EPSON under manufacturer. If you don't see your printer in the list, click the Windows Update button. It will take several minutes (about 20) be patient, Windows updates the list. You should see a hard drive activity during the update.

  If that wouldn't work, try to run the System File Checker:

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files
  http://support.Microsoft.com/kb/929833?WA=wsignin1.0

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• The message says the inconsistency in the data base of the installer and the installation fails. The summary of errors not display any errors. How to install LR?

  Message on the notification window "Inconsistency in the database of the installation program"and the installation fails. The summary of errors not display any errors. How LR to install?

  HI Pauld48784098,

  It will help us solve your problem if you can provide additional information. What version of Lightroom are you trying to install and what is your OS?

  In the meantime, this discussion forum, in which a user has experienced a similar problem, can help: "Inconsistency in the database of the installation program".

  Best,

  Del

• I tried to install an update for CS6, but every time he tells me that the installation failed due to the error um44m2p7 help please!

  I tried to install an update for CS6, but every time he tells me that the installation failed due to the error um44m2p7 help please!

  Refer

  Do not install updates | Failure to update or U44M errors

• Re-install Snow Leopard to a notice of Imac I3 mid-2010?

  Hello

  I have already received some good answers in another thread, but it had a different title, so I thought that I post here and maybe some members will more experience with this:

  I just bought a used Imac which is currently being shipped to me.  Here are the specs: mid-2010 21.5 inches screen, model A1311, series: W8114294DAS, Intel Core I3 3.06 ghz processor.

  He will come running to El Capitan, but they advised me to wipe the drive and reinstall the original operating system, which is the snow leopard, and then upgrade from there to El Capitan, with my own Apple ID. However, it seems to be difficult with this particular model. If the computer is initially supplied with Snow Leopard 10.6.4. My drive of detail might not work for the re - install.  I was told that Apple would be able to ship me a custom. I've also read about yet another thread that maybe these models came with a slightly different version of Snow Leopard, and this is why the retail CD may not work, even if the computer came with version 10.6.3. and it would be better to get a custom. Is this true?

  Then there may be a problem with an update of the firmware that the computer may or may not have and which could cause problems (not allow Snow Leopard install at all, or instead to install Lion). Is it possible to say if he had this update and maybe disable it before attempting to erase and install Snow Leopard?

  Does anyone have advice/stories to share before I actually try it? Or what would be the best way to go about this? I thought that I would try my SL CD detail first, and I hope that it will work. Otherwise, I could order the CD on measure and try this one. If I can't erase, at least I didn't damage, but what happens if I erase the disc, but then failed to install Snow Leopard? I was left with a blank computer. Or I would be able to install it once the disc has been erased?

  Someone also said using SuperDuper may erase the disc elsewhere or at least to make a back-up? I have not used before. There is no personal information on the computer again, I would try to re - install before anything else, so I just need a way to install El Capitan under my Apple ID, then I'll be able to install updates, or even a new operating system, as it becomes available.

  Is there a risk to try to use my SL CD detail if it allows me to erase and install (such as the installation of the 'wrong' version of Snow Leopard)?

  Here is the link to the original thread: purchases used Imac tips?

  Thanks for any idea!

  You can try this much easier.

  1 - Connect to App store with your apple ID.

  2 - install download 10.11 - he will say that you have already installed just 10.11 to proceed.

  3. create a usb installation program.

  4 - start the installer - erase hard drive and install a clean copy of 10.11

  5. place the iMac with your apple ID.

  Create an installer for OS X - Apple support bootable

• MacBook (13-inch aluminum, Late 2008) cannot install snow leopard

  So I'll try to fix computer for my mother, it's a MacBook (13-inch aluminum, Late 2008).  He was running very slowly so I did a factory of resets and tried to install a copy of snow leopard on it.  When I try to install it on my hard drive it says "Mac OS X does not have this disc."  The symbol for the hard drive has a yellow! sign on it (if it matters).

  (1) my question is what can I do to install the OS on this?

  Mavericks - OS would not install, I tried this right after the factory restore.

  -Unfortunately I can't eject the disc either-

  (2) that it has to do with my drive hard and how can I test that?

  Whence it the Snow Leopard disc? You must use a copy of Snow Leopard retail. You can buy Snow Leopard at the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (US). The price is $ 19.99 plus tax. You will receive a physical media by mail after placing your order.

  Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears, wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of partitions of one (1) in the menu dropdown. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

• Format and install Snow Leopard on Mac Mini

  Hello

  • I have a Mac Mini
  • Using boot camp, I have a Win10 partition which is now, the entire hard drive.  Really.
  • I have the installation of Mac OS X Snow Leopard (10.6.3) DVD
  • I directly connect the optical drive and a wired keyboard to the system
  • Start by pressing the [CTRL] key.
  • Download the white screen with the Apple logo in the middle of it.
  • .. then nothing.  He's here.  After 10 minutes, I pull the plug and restart the Windows partition and return to the slaughter of these discussion forums for clues.

  Issues related to the:

  1. How do I FORMAT and INSTALL Snow Leopard on the Mac Mini or m, I was too impatient after the [Ctrl] restart using the OS X DVD? 
  2. Is there an external utility that I should get to format the drive?
  3. I can do this in steps - can I install OS X on an external HD and then use it for the crater / rebuild the primary drive?

  Input greatly appreciated!

  Rade

  usually it is booting by pressing the C key to start from the CD-ROM/DVD-ROM drive.

  or start by pressing the Option key to get a list of the bootable devices that you can choose from.

  See <Startup for Mac - Apple Support combinations>

  NOTE: This does not imply that you run your Mac mini Snow Leopard.  I guess that your wording she used to run Snow Leopard, and that your Mac mini still has a DVD/CD player are good signs.

• Can I install Snow Leopard on a Mac Mini 2008

  Hello.

  I have a Mac Mini 2008 with the info printed on the envelope:

  Mini Mac 2.53/2X2G/320/SDI/AP/BT

  Model no. A1283 2008

  I tried to install Snow Leopard using the gray installation disc supplied with my Macbook Pro.

  It didn't work, probably because the drive is linked to my MBP (I guess).

  So now I think ordering setup of Snow Leopard on the Apple store instead:
  http://www.Apple.com/shop/product/MC573Z/A/Mac-OS-x-106-Snow-Leopard

  But I'm not 100% sure if the previous failure, I had was really just because of the gray drive or the Mac Mini 2008 does not support Snow Leopard.

  Hope someone can give me the answer, so I'm not an unnecessary purchase.

  Thank you!

  This is because the gray disc is specific to your model of MacBook Pro. Any Mac that has an Intel processor, at least 1 GB of RAM and running 10.4 or 10.5 can run 10.6.

  (141210)

• The installation fails, may be a missing file. Help, please

  Hi there, before I say my problem just want to say what I'm working on... - high-end PC with windows 10 - as soon as I launch a program to install any application adobe cc for example. Media encode it starts and then as soon as the bar is complete it gives an error saying that "the installation failed, may be a missing file" and I have no idea what it takes can someone help? PLEASE

  Hello

  You can follow: https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  yze_the_Creative_Suite_5_PDapp_log https://helpx.adobe.com/Creative-Suite/KB/Troubleshoot-install-logs-CS5-CS5.html#main_Anal

  Alternatively you can check the thread Photoshop CS6 installer can't initialize

  Let us know if this helped!

• My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  My mac crashes during the installation of the cs6. I have to turn off the mac. Now, I can't reinstall or uninstall cs6. He said the Installer failed to initialize.

  If you have not yet installed any Adobe application, try step below and check.

  Step 1

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '. ( "Don't miss ~ symbol" )

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the OOBE, OOBE old and AAMUpdater to old AAMUpdater.

  Step 2

  (1) right-click on the icon in the Finder, then select 'Go - To' folder.
  (2) you will get a text box, type in the following command and then press the 'return '.

  / Library

  It will open the folder System Library.

  (3) then navigate to Application Support > Adobe.

  Open the Adobe folder and rename the folder Caps Caps-old and young OOBE to centenarians, OOBE Adobe Application Manager of Adobe Application Manager.
  

  
  

  Step 3)

  Basket of Adobe Application Manager of Applications > utilities.

  Step 4) [same step again]
  

  Click on the link below and download Adobe Application Manager and install the same:

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once installation is complete, niche is going disappear, and then open the Application folder and locate the icon to launch Adobe Application manager, double-click it and update.

  Once the update is complete.

  Restart the computer once and try to install CS 6.

• Photosmart C4580 print without wires after installing Snow Leopard

  Hello. I recently installed Snow Leopard on my MacBookPro. Since then, my Photosmart C4580 print wireless. I checked the updates of the software and the message computer read that I was up-to-date so I don't know what to do. Any suggestions?

  Geez-you are a genius! Thank you very much - your solution has functioned perfectly!